Ford Fiesta broken ABS module removal and disassembling for repair if you have error code U3000

Автокөліктер мен көлік құралдары

The process of removing and disassembling ABS module from Ford Fiesta 08-15 with DTC (error code) U3000. 2 ways are shown, you can remove the whole module for replacement or just the electronic part of ABS so you can still drive the car while your ABS is being repaired. Yes, instead of spending $800+ on new ABS module you car send the old one to us for repairs and we fix it!
กระบวนการการถอดและแยกชิ้นส่วนของโมดูล เอบีเอส จากฟอร์ดรุ่นปี2008-2015 มี 2 วิธีตามนี้ คือ คุณสามารถถอดโมดูลทั้งหมดเพื่อนำไปใส่แทนที่ หรือแค่ถอดในส่วนของอิเลคทรอนิคของเอบีเอส ดังนั้นคุณยังคงสามาถใช้งานรถของคุณได้อยู่ในขณะที่ตัวเอบีเอสยังอยู่ในระหว่างการซ่อม ดีกว่าการที่คุณจะเสียค่าใช้จ่ายกับเอบีเอสตัวใหม่ในราคาที่มากกว่า 28,000 บาท ให้คุณนำตัวเก่ามาส่งซ่อมกับทางเรา
Instagram: allchiptuning
Line: digifox911

Пікірлер: 86

  • @vascoiriondo6609
    @vascoiriondo660911 ай бұрын

    I have a doubt, I have a 2011 Ford fiesta and the front right caliper is stuck, but there arent any code, just the brake the caliper stuck, what it could be? Maybe bad caliper or one valve inside of the abs is stuck...

  • @jericoborja-yc6zl
    @jericoborja-yc6zl Жыл бұрын

    sir after replacing engine mount, wheel sensors, brake pad, rubber cap of ford fiesta 2011, all wheels got sticked, what is the cause ABS Module?

  • @MrGamerKyle
    @MrGamerKyle2 жыл бұрын

    Hi I have a 2011 fiesta and have the same problem, i got it checked by a mechanic and advised either i spend a lot of money for a new abs module or just leave the problem and just to drive carefully since abs is not working anymore. My question is, if I leave the problem would it cause any harm to the vehicle?

  • @ktom4536
    @ktom4536 Жыл бұрын

    Hi my friend . I have got a working tested part, complete part from ford UK same serial numbers etc. I took it to a garage in Thailand, pattaya , that just plugged in and said, it's no good , bad code, I believe they did nothing. I took it all back. ( I saw the part tested in the UK, taken from a vehicle with no codes) Anyway, could the error codes be eradicated by replacing the electric module only ?? I have no facility other than a Ford garage to bleed brakes and pump. Thank you Many blessings happy songkran

  • @tanglk8142
    @tanglk8142 Жыл бұрын

    I change brek fuild, after 1 weeks ABS alarm, the car cannot auto brek at incline position

  • @sherwinabacahin5665
    @sherwinabacahin56652 жыл бұрын

    My Ford Fiesta 2011 had a trouble code U0423 for a months ago. I didn't give an attention for it since the car is running normal condition. Recently, I noticed the brake in the front left was sticking up. The fluid pressure won't release even I released the brake pedal. I checked already the piston on the caliper and fluid lines but everything seems fine. My question is. is it possible that the ABS ECU was the cause of sticking up the brakes on front left?

  • @carscarscars186

    @carscarscars186

    2 жыл бұрын

    It is more than likely.

  • @Sandra-dm8rd

    @Sandra-dm8rd

    9 ай бұрын

    @@carscarscars186do any belts have to removed when replacing module on 2014 ford fiesta ?

  • @alambakar3614
    @alambakar3614 Жыл бұрын

    How much its cost in MALAYSIA CURRENCY?.

  • @9Bahts
    @9Bahts4 жыл бұрын

    What's the head's number of the 4 screws of the black electric part ?

  • @carscarscars186

    @carscarscars186

    4 жыл бұрын

    it's there in the video. T20 torx

  • @NasrulFendi
    @NasrulFendi2 жыл бұрын

    When you reinstall the module. Do you need to bleeding the brake oil and add oil? Or it is just plug n play?

  • @FatHead1979

    @FatHead1979

    Жыл бұрын

    Yes, you need access to either Ford IDS i.e. a Ford dealer or Forscan on a Windows device, so you can use the 'ABS bleed" functionality. The traditional method of bleeding the brakes won't work because it won't include the mechanical area of the ABS module that are now full of air. The 'ABS bleed' functionality opens each section in turn i.e. a caliper at a time, and pumps brake fluid through to push out any trapped air.

  • @moneymakerforfree
    @moneymakerforfree Жыл бұрын

    Hi, i got abs, esp and engine light. Got diagnostic check and it says left front abs sensor. I changed that one and wheel bearing but still have the same problem and same fault. Can it be the abs module i need to replace?

  • @googleusers4195

    @googleusers4195

    2 ай бұрын

    I am having the same situation with my Rear Left abs sensor, how it's going for you have you fix it?

  • @keepitsimplesilly3212
    @keepitsimplesilly32122 жыл бұрын

    Hello sir, I've got a 2016 ford fiesta sports(push start). I have 3 lights on my dash one of them is the abs,traction control and the brake light on. I was wondering if you could give me advice on which parts of the car could be causing this problem. I don't have a scanner tool to reset the codes. Do you think this could me a bad abs module? It would me a lot to me if you respond to my message. Thanks in advance!

  • @carscarscars186

    @carscarscars186

    2 жыл бұрын

    The only advice I can give you is visit a Ford specialized garage (or a dealer) and ask them to run diagnostics on your car. It can be anything from blown fuse to abs sensor to abs module itself.

  • @keepitsimplesilly3212

    @keepitsimplesilly3212

    2 жыл бұрын

    @@carscarscars186 firstly thanks for responding. I am planning on taking this to the dealership but i don't feel safe driving the car for 10 hours in the condition that it's in. I live quite far from the capital. You've mentioned something about being able to drive the car without the abs sensor. If i were to remove it while i wait for the parts or maybe ship you the abs sensor would this be safe to drive? And does removing the abs sensor get it of the acceleration lag for the time being? And i apologize if i am naming the parts wrong. I'm currently in the Philippines on vacation but i normally live in the states where good me mechanics/shops are only a stone throw away. Thanks again

  • @dominozonda

    @dominozonda

    7 ай бұрын

    @@keepitsimplesilly3212hi, did you find out what was the problem?

  • @chuckencarnacion
    @chuckencarnacion3 жыл бұрын

    Do you also repair leaks from the ABS pipes?

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    Never seen such a thing.

  • @tonisupriadi1676
    @tonisupriadi16764 жыл бұрын

    Is the number or letter code of abs should be with the previous abs ?

  • @carscarscars186

    @carscarscars186

    4 жыл бұрын

    Yes, unless I reprogram it.

  • @chokbuddy883
    @chokbuddy8833 жыл бұрын

    kylangan po palitan yung abs module ng car ng ate ko pero sa casa lang daw pwede napakamahal.

  • @kiswosolnaraharjo4259
    @kiswosolnaraharjo42593 жыл бұрын

    How to Ulplug the Socket cable to ModuleABs i cant saw thanks

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    Pull cover bottom towards you and up. it will come off. Then pull up 2 vertical slide locks on the top. They don't move easily, so pull them up bit by bit.

  • @troaspect8622

    @troaspect8622

    3 жыл бұрын

    thanks Done Already

  • @georgeg.7770

    @georgeg.7770

    3 жыл бұрын

    @@troaspect8622 You're welcome.

  • @hughbunyea4703
    @hughbunyea47035 ай бұрын

    Who's the music by

  • @chitoreyes6462
    @chitoreyes64622 жыл бұрын

    Loc po sk mgkano pagawa tnx

  • @domdecastro6611
    @domdecastro66113 жыл бұрын

    Did you bleed the brakes before removing abs?

  • @hersondls
    @hersondls3 жыл бұрын

    hi sir I'm from Philippines I have problem with my abs module in my fiesta 2014 1.5/AT can you repair this how to keep in touch with you sir or do you know someone here in the philippines know how to repair abs module tnx

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    You can send it over and I will repair it. The car can drive OK without ABS electronic control part.

  • @qwertyyee3503

    @qwertyyee3503

    3 жыл бұрын

    Sir same problem here, napagawa nyo nb fiesta nyo?

  • @bongsoliven7822

    @bongsoliven7822

    2 жыл бұрын

    Hi. Na repair po ba?

  • @hubrob5370
    @hubrob53703 жыл бұрын

    Do you repair the module yourself? If yes, how could I conatct you please?

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    Yes I do, contacts on the intro screen.

  • @yasiruindeeragamage2564
    @yasiruindeeragamage25642 жыл бұрын

    Hey, when you remove the electronic unit from the assembly and keep the hydraulic unit installed in the vehicle, will the vehicle have normal mechanical/hydraulic braking? Is the vehicle drivable?

  • @carscarscars186

    @carscarscars186

    2 жыл бұрын

    It usually is. I used to drive my own car like that for few weeks LOL

  • @alambakar3614

    @alambakar3614

    Жыл бұрын

    ​@@carscarscars186after that u reinstall the electronic?.

  • @alambakar3614

    @alambakar3614

    Жыл бұрын

    ​@@carscarscars186after that u reinstall the electronic?.

  • @laserfalcon
    @laserfalcon4 жыл бұрын

    Is this the cause of mushy brakes?

  • @carscarscars186

    @carscarscars186

    4 жыл бұрын

    Sure not.

  • @nizrannugroho9163
    @nizrannugroho91632 жыл бұрын

    Hallo ..you have module abs ford fiesta 2011 sir..second and function

  • @carscarscars186

    @carscarscars186

    2 жыл бұрын

    Part number?

  • @nizrannugroho9163

    @nizrannugroho9163

    2 жыл бұрын

    @@carscarscars186 AV59-2C405-EA A426G GERMANY At 10.0212-0728.4

  • @nizrannugroho9163

    @nizrannugroho9163

    2 жыл бұрын

    @@carscarscars186 I share on your Instagram sir..

  • @marklewis2517
    @marklewis25172 жыл бұрын

    Hi mate do u have to bleed break after

  • @marklewis2517

    @marklewis2517

    2 жыл бұрын

    Do u have to bleed break after

  • @thomas9434

    @thomas9434

    Жыл бұрын

    @@marklewis2517 yes

  • @seekkkkkkkkk7366
    @seekkkkkkkkk73663 жыл бұрын

    I have seen brake pedal switch can cause same issues. Is this correct?

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    Not quite. Broken switch can make your shift lever stuck in P position, but will not cause U3000.

  • @seekkkkkkkkk7366

    @seekkkkkkkkk7366

    3 жыл бұрын

    @@carscarscars186 thankyou, our car drives normally but has these lights, at first intermittent, now on all the time...obd2 elm 237 no codes detected, no matter the app. Any ideas or is it ultimately the module?

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    @@seekkkkkkkkk7366 ELM327 won't help you. Why do you think we use expensive professional equipment and not a $5 butt plug LOL Take it to any decent garage or to a dealer and ask to scan ABS for errors, then let me know the codes.

  • @seekkkkkkkkk7366

    @seekkkkkkkkk7366

    3 жыл бұрын

    @@carscarscars186 ok Where in thailand are you please May need to see you ,👍 we are in thailand pattaya

  • @seekkkkkkkkk7366

    @seekkkkkkkkk7366

    3 жыл бұрын

    @@carscarscars186 where u based in thailand.

  • @konsultanmanajemenbengkelm1090
    @konsultanmanajemenbengkelm10903 жыл бұрын

    #bengkeltomoprobolinggo present

  • @laserfalcon
    @laserfalcon4 жыл бұрын

    That battery came out way to easy

  • @carscarscars186

    @carscarscars186

    4 жыл бұрын

    So they usually do LOL

  • @laserfalcon

    @laserfalcon

    4 жыл бұрын

    @@carscarscars186 I ve worked on some cars you need a degree and a crane to get out, ha

  • @pendysimilikiti1704
    @pendysimilikiti17043 жыл бұрын

    what is the price in thailand abs pump this..??

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    Repair 7500, replacement unit 9500

  • @pendysimilikiti1704

    @pendysimilikiti1704

    3 жыл бұрын

    @@carscarscars186 can I order this abs .. ??

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    @@pendysimilikiti1704 What's the part number you need?

  • @pendysimilikiti1704

    @pendysimilikiti1704

    3 жыл бұрын

    @@carscarscars186 AV59 2C405 CB

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    @@pendysimilikiti1704 You contact me on Line or Instagram.

  • @cloudlittlepuppies6907
    @cloudlittlepuppies69073 жыл бұрын

    Sir pano ka makontak hehehe pagawa ko din sana ung ecosports po

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    Да, можешь.

  • @Gettingjiggywithit228
    @Gettingjiggywithit2283 жыл бұрын

    How about in phillipines?

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    No idea but you can send your abs module over.

  • @Gettingjiggywithit228

    @Gettingjiggywithit228

    3 жыл бұрын

    @@carscarscars186 i have to dismantle it?

  • @carscarscars186

    @carscarscars186

    3 жыл бұрын

    @@Gettingjiggywithit228 Well, unless you want to send the whole car - yes, you do.

  • @Gettingjiggywithit228

    @Gettingjiggywithit228

    3 жыл бұрын

    @@carscarscars186 lol😅

  • @_s8212

    @_s8212

    3 жыл бұрын

    How much for a repair

  • @guerramundial9868
    @guerramundial9868 Жыл бұрын

    Gucci brand it is for poor people to look like rich.. umm Gucci.

Келесі