Lemme explain it simply: *Turbo side intake for StU StU* *Exhaust for WoOoSh pOp bAnG* *Coilovers for tacking those bendy bois* *Brakes for that epic stop stop* *Wheels to make it look not behd* But seriously really good vid explaining it 😎💪

@TaffPlays

4 жыл бұрын

Stutututu*

@ZacBaldy

4 жыл бұрын

100% yes 😂😂

@lesliek6192

Жыл бұрын

Bigger wheels more sticky to Roady road m8. Small wheel = no traction

Suspension is great for performance, ran 10's in my G6E on stock suspension. This list is basically top 5 mods when fresh off your P plates.

THE VIDEO WE HAVE ALL BEEN WAITING FOR

Bruh great video, I’m bouta buy a 2008 FG turbo and want mine to basically be like yours so this video helps a lot

Loved the video. LOVE the car colour. Big Thumbs Up.

Absolute first mod for a barra turbo is a preventative one. Turbo oil line's with inline filter. Leaving the stock one in is a ticking time bomb and will destroy your turbo once the factory gauze filter clogs up.

@matty00866

Ай бұрын

got a link to where that part can be bought?

Hey Zac, really appreciate the vid of your mods

Fuel injectors, bigger intercooler with piping, hi flow cat, cat back exhaust and air filter - my first 5 mods.

Hey mate I love your vids keep up the awesome work

Not bad vid for a young fella good job. I was a V8 man for a long time. Then I picked up a FG series 2 Xr6t with 10k on it. I’ve had it for 4 years got 34 k on it now. And can’t imagine what to replace it with.

Heat exchanger for the zf transmission. Mine just milkshaked. Should include that mod on something so avoidable

@beyondbackwater4933

4 жыл бұрын

Or get a 6 speed manual

@chris929rr7

4 жыл бұрын

Tranny cooler should be the first mod any owner does or bye bye transmission at around 100-150k mark. The taxi drivers in Sydney were hell bent on keeping up with diff oil changes every 80k they told me.

@Elguapo93

3 жыл бұрын

And I’d change the turbo oil feed line before anything lol

Rear falcon rotors are same size from ba onwards. Also all rear single pot calipers use the same pads aswell. I have fg g6et discs all round and calipers on the front to suit turbo rotors on my BF wagon. Only difference between pre FG and FG is the front break lines need to be swapped to the B series ones or switch the FG lines right to left and left to right as the steel bend is facing the wrong way due to diffetent placement on the front side of the rotor) Rear calliper mounts are the standard bf wagon ones. Pbr upgrades that come with 4 pot brembos and territory rears are the only ones larger other than 4 pot brembo rears.

Awesome video man!

I went a XForce 3 half inch into a 4 inch dump pipe on my FG F6. Sound amazing

When's the vid coming of blowing the rear bar of with a burnout

@matthewcanino90

4 жыл бұрын

YES!! i too am keen for that vid!

@ZacBaldy

4 жыл бұрын

Warbird I’ve been practising, maybe very soon 😉

Very neat looking XRT beaut colour to offset/contrast wheels..nicely debadged

did it on my g6e turbo looks clean

Delete blow off valve and force pressure backwards through turbo causing impeller to shudder there is your flutter.. Till it says no more don't be tight by a descent blow off valve allows turbo to keep spinning while letting excess boost out not causing back pressure to stall the turbo.

@dopamine-clothing92

2 жыл бұрын

I have stock bov in 2 atmosphere lol

Another massive things everyone should do is get a trans cooler... it’s a must! 😂 Hope everyone enjoyed the video, what mods would you do?

@matthewcanino90

4 жыл бұрын

a burnout maybe?

@IISIDESWIPEZII

4 жыл бұрын

Must do mod on these cars is intercooler piping. Car is literally useless if the factory pipes split... Which they do on anything more than stock boost.

@TLE1977A

4 жыл бұрын

Number one mod trans cooler replacement at minimum at same time as trans service.

@scunner900

4 жыл бұрын

Where did you install your trans cooler? Nobody seems to sell an FG kit..

@Racyroads

4 жыл бұрын

@@TLE1977A Good idea , cheap enough.

Keep up the good work mate !

has his own branded hoodie and doesn't wear it

Hey mate just asking I’ve got a fg 2010 6 speed manual that needs a bellhousing but I also have a ford fg 2009 automatic, just asking can my auto bellhousing go on my manual fg?

First thing I’m doing once I end up buying an f6 is buying a full spool rod and piston rebuild kit, gonna build from the inside out so old Rodney doesn’t go knock knock bang once all the bolt ons go on

@michaelmatusiewicz6120

4 жыл бұрын

Doesn’t need a rebuild until you actually make decent power

@goldberg7995

4 жыл бұрын

fuck wit or, I build from the inside outside and once I slap a bigger turbo on she’s ready to rock lmao

@motovntrzss

4 жыл бұрын

Rebuild the box, diff and half shafts before you toutch the bottom end. Youll go 9s on a SBE

@deevizm8035

Жыл бұрын

If you’re ok with spending the money and are planning to go BIG, that’s a good plan. If you only want a extra hundred hp or so, dw about it, they are tough motors.

I'm getting sports Ryder coilovers on mine soon. Then new wheels ryres then. Tune and entry level power package before Xmas can't wait

Was it from factory an xr6 turbo or just an xr6

Nice car and good setup on this engine!!!

How much is the exhaust system

Hey man I really like those wheels I don't really know what I'm looking for size wise. I want to get advans but don't know what size I should go for

Hi Zac how do you find the brakes after the upgrade? Is it worth the money or if you did it again would you just go the brembo kit? I'm looking at 6 pot brembo but am having trouble justifying the price atm

@volatilegaming5852

11 ай бұрын

Depending on what model, you could pull the brake setup off of an f6 typhoon. Old man put a set on his work ute bc he had like 600kg of tools in it.

what size battery is that (part number).

I like the exhaust setup I done the same to fairlane but instead went 4 inch dumpy's mufflers were ingraved ford performance by borla

I have a ford falcon xr6 bf non turbo but I want to get a turbo kit for it but know much it can someone help me out?

Wow! You seem so stoked! Nice car! oh to be young again. I learnt a long time ago mods devalue your car big time. It is good for the performance shop and good for the next buyer down the line who gets an absolute bargain. Albeit turbos wear things out fast. Baby it. Thank you on behalf of the next buyer or you could keep it going for 25 years and recoup what you have put into it. Keep all the original bits for that day you do sell it. Don't be fooled by greener pastures. It is worth keeping it a very long time. Great job. Next time buy the car that has all the performance specs you want in it already as standard and save you some money, meanwhile enjoy the fun of it and get it out of your system. Hahaha

Who did the tune ?

how much did u buy it for and how much have u put on it?

First thing I’d do I colour icc and xr50 dash accents then I’d do xr50 seats front rear and piano black icc faceire etc

@NAH7Z

4 жыл бұрын

ive been looking at the xr50 seats, are they more comfy than the normal xr ones? or just a different design?

@TaffPlays

4 жыл бұрын

I'd get a kayhan icc system for android auto/apple carplay

@thatgaminguy

4 жыл бұрын

nahtz. Xr50 seats have leather and are more comfortable in my opinion

Hey mate, I've heard some people say you need a tune after the turbo side intake kit. Have you heard anything about this? Or does the stock ECU adjust well?

@IISIDESWIPEZII

4 жыл бұрын

Anyone who said you need a retune is an idiot. They function as if nothing changed.

@goldberg7995

4 жыл бұрын

dav386 any car would run a lot better with a custom tune, most factory tunes are trash but for just a turbo side intake you don’t need to get it retuned

I have a XR69RW which is my license plate... and it's Whyte😆😆 2011

I want to turbo my AU falcon would I have to buy a xr6 turbo motor or just the turbo

@TaffPlays

4 жыл бұрын

You could get turbo kits for the AU's intech motor, cheapest one I found is $2500

Does blocking the blow of valve put additional pressure on the turbo ?

@joshuawaugh300

11 ай бұрын

😂👍

What percentage tinting do you have lad

What u actually need 1 intercooler 2 intake 3 exhaust 4 fuel system 5 brakes

@petepowell7399

4 жыл бұрын

And shelling out for top shelf rubber...helps alot.

@elrud5964

4 жыл бұрын

@@petepowell7399 getting top shelf every thing is suggested

@petepowell7399

4 жыл бұрын

@@elrud5964 amen brother.

@coadmanktm

4 жыл бұрын

nobody has mentioned valve spring upgrade. a known weak point of the barra turbo. a must do stage 1 mod. Research it

@elrud5964

4 жыл бұрын

@@coadmanktm you only need valve springs when you need them, if your not getting any valve float then there is no need. The ba valve springs are pretty weak but bf-fg can get better power on stock springs.

This is cool as. Im actually doing something similar to my ln111r hilux

Best mod for your turbo falcon is an aftermarket oil feed line otherwise it will be na

@FilthyGinger4130

4 жыл бұрын

First thing I did, along with the trans oil cooler.

@Elguapo93

4 жыл бұрын

Learnt that the hard way

@meathead2575

3 жыл бұрын

Maybe service your car regularly with quality oil and you won’t have a problem

Hey where did you get your grill from?

@DanDanNissanMan

4 жыл бұрын

Mackielec on face book 👍

Mine broke today. No boost, & no obvious reason why........ 😒

Compressor surge sounds horrible IMO. I would be more inclined to run a BOV. Even though I didn't on my MR2. (Budget problems and living two doors from a Police station) Brett from Go Fast Bits would be a good person to talk to... Me personally, If I had to pick just five mods they would be: 1. Valve springs. 2. Injectors. 3. ECU. 4. Fuel pump. 5. Intercooler. I'm glad that I'm not limited to just five mods. But if I were. Those would be it I guess.

@peterdacey3934

4 жыл бұрын

BOV is so fast & furious circa 2001.. Flutter sounds much better.

@Dissentient

4 жыл бұрын

@@peterdacey3934 Each to their own I guess. There are reasons for BOV's other than sound. More important reason, but whatever...

I got a 1965 ford falcon with 200 inline 6 with header and 0.80 pistons the biggest pistons for a 6 cylinder the pistons are bigger then a 8 cylinder stock pistons.

@grantreid3031

4 жыл бұрын

Considering the 200 ford has a bore size of 3.680" and the falcon v8s had a bore size of 4" i don' t think there would be enough distance between the bores to fit sleeves to take pistons that big and you would have to fit sleeves as there would be no cyl wall left after boring that much out. 0.80 isn't even a size really the old falcons were imperial and 060" was the largest size but 080" may be available making a bore size of 3.760" way less than the 4" bore of the v8s.

Valve springs,intercooler,exhaust,fuel pump,intake,flapper mod,trans cooler,wastegate and oil feed filter I never could count and best to run a bov not good for the turbo without it

@mickybtegz7061

4 жыл бұрын

What about a flux capacitor?

@meathead2575

4 жыл бұрын

What about a packet of bbq shapes

a bigger intercooler helps to

Evening, Boss. Would you have any idea what I would look for, for an NA FG daily; in terms of exhaust?

@IISIDESWIPEZII

4 жыл бұрын

Anything that isn't loud or unresonated. As n/a xr6 sound like utter garbage.

@mikehunt8221

4 жыл бұрын

I've got an fg n/a and ive gotten my centre muffler straight piped and then rear muffler hot dogged, sounds sick like a v8 with grunt and rumble, also use as a daily

@NAH7Z

4 жыл бұрын

ive got 3.5" tips, and im pre sure its just had the center muffler changed to a hotdog, isnt extremely loud but its satisfying when you put your foot down haha. could also make your car run rough as fuck for more crackle and pops lol jks dont do that pls haha

@TaffPlays

4 жыл бұрын

Have a look at some of his older videos when he had is na as he had an na fg before buying this turbo!

@mikehunt8221

4 жыл бұрын

@@TaffPlays his exhaust was still pretty quiet on his n/a but louder than on his turbo now

How to do shaft damage

@joshuawaugh300

11 ай бұрын

Work the shaft 😛

Can you do an episode on the Mighty au

how do u have turbo on p plates?

@grantreid3031

4 жыл бұрын

Move to a state that allows it.

Currently own a 07” bf Fairmont ghia and I now wanna sell it for a fg xr6 turbo 😂

@cooperbeadman2485

3 жыл бұрын

Just bought the ba xr6 turbo with a garret turbo first one and am in fucking love got it int the phantom purple with the custom interior

Do you have a full engine modlist on your car? I'm struggling on deciding between an FG XR8 or turbski. Manual of course, Is your power reliable? Cheers mate!

@TaffPlays

4 жыл бұрын

From the top of my head he has a k&n intake relocated to be a turboside intake, plasmaman intercooler rated for 700hp, painted valve cover and I think that is it apart from the tune.

@traighbasson1455

4 жыл бұрын

The xr6t is the better car when there both stock I've heard the xr8 is sluggish

@ImmaSlapYoFaceMC

4 жыл бұрын

The power difference is like 10-20kw more for the xr8s than the turbos, but honestly you will fall in love with the xr6 turbos. I have a BA one and I wasn’t much of a turbo guy and only got it because it was an absolute steal, and I bloody love the thing and all for turbos now. They make such epic noises and better to Mod as well. Defs get an xr6 turbo!

@mikehunt8221

4 жыл бұрын

auto has better ratio, revs and gear changes than the manual trust

@traighbasson1455

4 жыл бұрын

@@mikehunt8221 yeah but manual is more fun

Please do a vid like this for NA falcon PRETTY PLEASE

@notax1872

4 жыл бұрын

facts

@motovntrzss

4 жыл бұрын

Cold air intake, xforce 2.5 inch exhaust, hi flow mufflers, hi flow cat, headers, and a tune. Should see around 185rwkw +-5 on 98

Good video bro, u know how capable these Barra's are. Just ask Dandy Engines

It will be a sad day when you move on to another car Zac! I hope when that time comes you'll do as I did and hold on to your FG as well.

@scottsencounters

3 жыл бұрын

Already sold now :(

Do the oil feed next Zac! Otherwise remove the micro filter from near the banjo

My dad has a Ford falcon XR6 turbo

I'm still out on the blocking off the bov, that's some serious extra pressure the turbos gotta deal with when u get off it.. might sound cool but surly it's fking it in the long run🤔

@TheWiLLB00

4 жыл бұрын

cant have a BOV in most states of AUS, its illegal

@grantreid3031

4 жыл бұрын

@@TheWiLLB00 They come out with a bov standard that vents into the intake it is only illegal if it vents to atmosphere.

@30debt55

3 жыл бұрын

@@TheWiLLB00 no its not, its illegal to vent to atmosphere

@jakob31448

2 жыл бұрын

@@grantreid3031 that’s a diverter valve not a blow off valve

Some people prefer to keep these cars stock, and they are the type of car imo to hold better value when left stock, maybe a couple wee mods but nothing over the top

I must be the only one who doesn't like the turbo-side intake and went back to the stock air-box. I find the turbo side intake very noisy and makes the car feel unrefined. Fun for the first week and then all the excessive noise gets annoying.

@bourgeoisiez764

4 жыл бұрын

gtlegend007 never gets old lol

@bengibson3955

4 жыл бұрын

Turbo side intake does not make much difference at moderate boost levels and conservative levels of tune. Start pushing things near the limits of the turbos efficiency on the compressor maps and minimising the pre-turbo vacuum gets important.

Put your coil pack cover on

Clean for 190km on the clock.. like your honestly, upgrade the suspension, rattles your tail bone. Also great that for an AUTO you dont promote the "drone". The air intake, does this meet roadworthy or needs engineering certification for a pinch more performance?

No way. I improved my car’s performance before aesthetics.

@MY_USER_WAS_TAKEN

4 жыл бұрын

Ahaha agreed, I only got rid of my stock rims at 750hp, currently got a decision to make 1200hp or a pain job.... 1200hp any day of the week

2.5 mod=earls Turbo braided oil line

If I got a falcon I'd upgrade the rear cradle to fix all the flogged bushes, (drops out really easily), and then start getting rid of as much ford plastic as possible from under the bonnet.

@notax1872

4 жыл бұрын

bushes, IMS diff hat, coilovers & swaybars and you'll be chilling suspension wise

@MV60

4 жыл бұрын

@@notax1872 Yep, pretty much the first thing every falcon needs. :) It's good when you know a little bit about them before buying so you can fix the factory weaknesses. Oh and new rotors all around too, the stock ones are usually warped.

@notax1872

4 жыл бұрын

@@MV60 funny enough i just bought DBA T2 Rotors front and bendex ultimate pads not sure how they will be for my N/A hopefully good

@MV60

4 жыл бұрын

@@notax1872 Better than stock. The rotors alone are a great upgrade.

@TLE1977A

4 жыл бұрын

@@notax1872 good BUT ultimate pads wear fast and leave lots of black dust on your wheels. You can wash them and next day dust is back.

Exhaust is half done. New exhaust with drop pipe 3 1/2 to 4 inch and cat. Basically want it from Turbo back. You're missing out with that exhaust.

Here’s two things you should do immediately after getting a Turbo. Oil feed kit. Trans cooler for the lady’s in the Auto so you don’t milkshake it.

@joshbarker432

4 жыл бұрын

Sick of losing to autos aye

@petersmulders8058

4 жыл бұрын

I have a auto and I just put it in sports mode to drive it like a manual best of both worlds

@lesliek6192

Жыл бұрын

@@joshbarker432 auto will leav manual for dead true

@deevizm8035

Жыл бұрын

Auto is faster, but MANuals gives a better feeling, more control, more reliable, cheaper and are just more fun in general. Plus, you can’t clutch kick a auto.

@joshuawaugh300

11 ай бұрын

Manual isn’t more reliable than a zf box 😂😂

I have the process west street intake which is not turbo side and still crosses over the motor and the car is making over 500rwkw so the turbo side is not essential I don't think unless you are going for massive power.

@IISIDESWIPEZII

4 жыл бұрын

Yeah, we love him, coz he ain't a dick. But Zac really is very new to performance cars. He gets a lot of things wrong. Just hope people who know less than him don't take everything he says as gospel. Turbo side intake is just a tidy up for sound and more room under the bonnet, that's it.

@mikehunt8221

4 жыл бұрын

@@IISIDESWIPEZII So a turbo side intake isnt necassary in terms of performance?

@goldberg7995

4 жыл бұрын

12345 6789 yes it is necessary 😂 it eliminates heat soak from the engine cross over, engines do not like the heat, especially in Australia during summer

@mikehunt8221

4 жыл бұрын

@@goldberg7995 mate im just going off what they guy said up there "Turbo side intake is just a tidy up for sound and more room under the bonnet, that's it" doesn't sound too important to me but if its needed then ill go for it

@goldberg7995

4 жыл бұрын

12345 6789 it’s not ‘needed’ but it definitely helps, yes it does make the bay look a lot cleaner but it also help the engine from copping all the hot air from going across the engine

Nice

Miss my old xr6 turbo. Got an el xr8 now and it's no fun to drive.

@jerryking7772

4 жыл бұрын

I love my EF. Only a 4ltr but she's clean as.

I would but im too poor to own a turbo haha, i got an N/A and still im too poor to afford 1k and over mods like that haha

Hi Zac luv ya channel and thanks I got a discount from Mitchell at Mackielec he's awsome great bloke I get all my work done through him also got my cold side intake and battery relocation also got intercooler pipe replacement kit and he just did my suspension lowered looks mint and drives awsome just saving for a tune he's taking my FG to XR6 Developments can't wait 👍🏻

Love to know where you're getting a 4 corner brembo kit for $1500

@ZacBaldy

4 жыл бұрын

Ben Krause fronts only 4 pot I’ve seen go cheap

@mickybtegz7061

4 жыл бұрын

My mate sells them for that price all the time!

Fuck I needed this video

F6 rear bar and side skirts, Sunroof, Leather interior

@IISIDESWIPEZII

4 жыл бұрын

Sunroof mod? You're crazy. No thanks. Asking for trouble.

@goldberg7995

4 жыл бұрын

Swipez what’s wrong with a sunroof?

@TLE1977A

4 жыл бұрын

@@goldberg7995 rust leaking water etc.

@goldberg7995

4 жыл бұрын

tle1977a not if you get someone to do it professionally lol

kind of silly upgrading rear set of brakes when most braking is done on the front

@bejay5971

4 жыл бұрын

Lmao

@nickvella7957

3 жыл бұрын

This is the most spastic comment

5 mods 1. New interior 2. New paint job. 3. New suspension. 4. New stereo 5. No panel gaps

@WTCHME

4 жыл бұрын

Spot on

Hey Zac I've seen your falcon around maybe you should race me one day

simple vids are best

what are the wheels ?

@Activision.Reebok

4 жыл бұрын

Rota grid wheel's

I drive a GU why is this in my recommendations?

@jaybloggs8699

4 жыл бұрын

ask Google/KZread

@devinb3397

4 жыл бұрын

VibranceVFX ok boomer

@VibranceVFX

4 жыл бұрын

Steve Smith Fkn Child

@devinb3397

4 жыл бұрын

VibranceVFX you’re the one asking someone why their video is in their recommendations cob.. it’s a KZread algorithm. Clearly you were searching up other car videos or watched a falcon video and KZread suggested it. It’s not like the guy who made this video hacked your account and made it come up 😂

@VibranceVFX

4 жыл бұрын

Steve Smith pfff ok boomer

First mod should be to clean the spare wheel.

I have a ls1 and I always beat vf ss I've stayed beside a maloo same with a G6 turbo and beat a AMG and the only thing to smash me was a F6

@idontreadreplies.252

3 жыл бұрын

gotta love the sound of a ls tho..

Mod 1 for autos - EXTERNAL TRANS COOLER

No bov that’s great for trying to turn the turbo backwards and no valve springs upgrade great for high revs and must be a really happy dyno has it shit the bed yet

Every time you get me when you say ''Falcon'' it sounds like ya saying fawlken bruh

Hey mate, ill be honest im not into new aussie cars. Nevertheless your content is very enjoyable and professional. Keep it up and I may even get into new falcons :))

quick question - why do you always talk about your cars power in horsepower? We normally measure power in KW in australia. Horsepower is imperial and every time someone says how much HP they have, i have no idea what that is in KW unless i google a conversion. My fg makes 354KW with similar mods to yours. A tune and basic supporting mods definitely turns these into a whole different monster!

@jerryking7772

4 жыл бұрын

Kw to HP add 25% from memory.

@richo1333

4 жыл бұрын

@@jerryking7772 yea i know roughly the conversion but i was puzzled as to why an australian dude, making videos about his australian built car would be measuring his power in american imperial numbers. Couldn't possibly be to inflate the numbers so it sounds better? We use KW, not horsepower. Killometers, not miles. Metric, not imperial etc. Im not trying to be a jerk, its just a personal peev of mine.

@grantreid3031

4 жыл бұрын

@@richo1333 There are plenty of us old school guys still around that talk in horsepower and imperial sizes plus we know both. For eg i was in primary school when metric first came in and so when i entered the workforce as an apprentice engine reconditioner everything was still measured in imperial and it literally took decades for metric to completely take over as a lot of engines retained their imperial sizes even with bolts. I remember some fords had a mixture of imperial and metric bolts what a shambles that was.

Hey bro , most of us on KZread started watching you with your n/a xr6 fg falcon journey which we all loved , so now your baging n/a fg falcons , come on bro I love my n/a xr6 falcon , personally I think that n/a barras sound better than the turbo wind up toys that sound shit , just my opinion , , best not to shit on your original bread and butter .😉

@michaeloliver2907

4 жыл бұрын

Tubo barras sound fine as long as ur not feeding air back through the turbo like a wanker

@petersmulders8058

4 жыл бұрын

100% agree BC XR6

Things I'd do to an xr6t fg 1. Upgrade the icc to a kayhan android auto system 2. Wrap the bonnet, roof, and boot in black, I'd think that would look sick on your car 3. Upgrade the turbo for power 4. Tune to make 600hp 5. Xforce performance exhaust

Deleting a blow off valve is NOT a good modification.. yeah sounds hectik but its not a good idea

@Reecey28

4 жыл бұрын

James Stevenson dont try and say it damages the turbo cause that is full of shit 😂😂

@meathead2575

4 жыл бұрын

Oh James... why are you so dumb?

@givejamesacall

4 жыл бұрын

@@meathead2575 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 you tell me champ

@givejamesacall

4 жыл бұрын

@@meathead2575 please explain your reasoning and prove your results as to why a blow off valve delete is a good modification?

@meathead2575

4 жыл бұрын

It's personal preference James. Thousands of cars not running bov have never had issues

You never remove the blow off valve if you do this will damage the turbo due to pressure surge when you shut the throttle the pressure has no where to go so it back purges into the compressor wheel this damages the compressor the shaft bearings/bushs and the seals only an idiot would do this

@ir0nal3x97

4 жыл бұрын

Has been dis proven a million times

@craigfiles7067

4 жыл бұрын

@@ir0nal3x97 it has not been disproven if it had no turbo manufacturer would use them blow off valves are there to relieve the damaging back pressure to the compressor wheel this damages the turbine blades and shaft I've used turbos since 1987 & damaged many due to back pressure

The ONLY people that think turbo flutter sounds cool are people who have turbos that flutter

@MV60

4 жыл бұрын

Hell yea man. I can choose to make mine either dose or sneeze, dose is way better. Get yourself one.

@TomN495

4 жыл бұрын

Everyone loves a good dose

@joshbarker432

4 жыл бұрын

@@MV60 and destroy ya turbo I'm the process

@MV60

4 жыл бұрын

@@joshbarker432 Ha ha, how? This will be good...

@joshbarker432

4 жыл бұрын

@@MV60 the fact you don't know how isnt good! 😂

New intake manifold

@jaybloggs8699

4 жыл бұрын

not needed... stock FG fine for even BIG hp

@tomhyde8977

4 жыл бұрын

Yeh but looks shit

Didn’t see manual transmission on the list

@ZacBaldy

4 жыл бұрын

kyranoscopy why go slow?😉

@sourwords1808

4 жыл бұрын

Manual isn't for millennials. Sad but true.

@kyranoscopy6986

4 жыл бұрын

Sour Words literally the dumbest thing I’ve ever read

Not having a BOV or a recirculating BOV will damage the turbo

@Yokotukanoshi

4 жыл бұрын

Yeah gay.