i showed some of this live on Instagram yesterday and today. Join us and don't miss daily behind the scenes live streaming at instagram.com/meade916

@kiabass8798

5 жыл бұрын

This build is gonna be nice and clean

@sacsicc916

5 жыл бұрын

meade916 that end credit had me rollin

@johnclark3067

5 жыл бұрын

I need to do something very similar to my truck. Reversible stealth installs for real life. Thanks again Steve!

@kamryn7496

5 жыл бұрын

Can u blow the factory woofer up see how much power it can take

@James187781

5 жыл бұрын

Hey was wondering what kind of nail gun you use to put together your enclosures. Seems like it's a lot easier than using screws.

slow and steady, no rush. quality over quantity.

Very Nice and clean work, i'm glad your still around 😎 i remember seeing your videos 10 Years ago

"Killin me smalls!" Just dying to see how this things sounds! It's like a friggin soap opera waiting to see this thing finished! I'm doing same thing with my truck ( building piece by piece not same setup) , I got impatient and tossed everything in so I got tunes and spending as much time as possible cleaning up wiring and making it look right, it's my daily and I just can't go without music.

Love that Dog bro. Beautiful animal!!

The amount of time it takes to make it all look good adds more appreciation for the amount of work you put in man. This could be a 3 video series or a 100 video series. It’s all learning for me. Keep up the great work.

It’s crazy how you run a big business,make everything In house,and you can do more in one video than Doug does.this would’ve taken him a video series,6 follow ups and 9 months. THIS IS WHY YOU’RE THE BEST.

Steve when you stood on the machine at 9:33 I thought you were getting up to twerk it to the music and show us your moves 😂

I have a pretty good amount of experience with the Ford Sync system and the Sony amp in these fords. My recommendation would be to go with the PAC ampPRO route. It should have a toslink out for the audio control unit. With this method, you can leave the factory system alone. Typically, when you unhook the Sony amp, the system does not behave correctly. There is also a harness that can hook into the speaker output harness of the Sony amp. For that you can use the PAC APHFD01. With this combination of parts, you can leave the factory system alone, and still have good beat. Hope this helps a little bit.

@meade916

5 жыл бұрын

already have it. You are 3 video's behind brotha. Thanks though!

@JaedenHudson

5 жыл бұрын

@@meade916 Yup I had to confirm by watching that vid again as I had forgotten you got it. That speaker harness will help too unless you plan on running your own wire.

honestly these are my favorite videos! love to see you create and build proper quality systems, your the man my bro!!!

I bought a 22'' bass drum from the local high school and I just beat the mess out of it while I am going down the road and for super bassy music I do a drum roll on it. A lot cheaper than an install. Lol.

Yea'h boi, you're going with that Audio Control DM810. Halfway through the video, I didn't know if you were going to use a DSP or what. I forgot about the room on the floor behind that Gately Audio box which is beautiful, madd respect. I can't wait to see the rest of this install. I'm especially paying attention to the integration with that MyFord Touch 3. Thank you for the great content, keep em coming. Respect.

Looking good as expected, can't wait to see the final layout 👍

Looking good so far Mr Meade. Can't wait to see the finished project

Your music selection in the background is just my type...Suga Free, Celly Cel straight west coast bangin

Would love to see you tear down that factory powered sub and then put it’s amp on the Dino! Seriously

Progress is progress bro! Keep em comin when ya can!

Looking good as always. Really interested in the neo quick terminal...being a drummer, I'm always pulling my sub box out...this would solve alot of hassle. Thanks for the good products and keep up the great work!

@meade916

5 жыл бұрын

They're available now at WcCarAudio.com, Amazon.com, and eBay.com! :)

Your installs have always been clean, but having that laser/router at your disposal really makes it next level👍🏻

You're teasing us bro cold-blooded 😄

Todays mission, get something done! LMAO. Thats usually my mission too but i fail at it often.

What’s up bro? I hope all is well. As always you have kick ass builds. Can’t wait to see how this one turns out.

The definition of taking clean work to the next level.

The longer you take on something that can be done in couple of hours is better then doing it in couple. At the end, everyone is happy. Can’t wait for it!

You should blow that old sub up!! Maybe a woofer flex episode?!?!

My Lord meade916! You make it look so easy and those of us in the know know its not. Nice work as usually brother.

@ourlifeinwashington4114

5 жыл бұрын

Usual

Love your vidz, your craftsmanship and detail (love) you put into your work. I hope your boys know their dad is a renaissance man!

My favorite installer SMD . I wish my local audio dealer would do half the quality of work as you. Or put half the effort as you do.

Bro clean set up! If I lived in that area I would definitely see if you could do a build for my truck. I’ve been watching for years now ever since you got the new shop and not a single build has bored me love it man

Nice layout, stealthy and makes use of all the hidden space of the cab.

Awesome job @SteveMeade for just the planning stage. Perfection takes time for sure.

Love your vids. Thanks for taking the time to share your work.

Great job Steve!!!! 👍👍👍 I know your a very busy man Steve, but we all would like to see this install up and bumping to see what those 6.5 subs can really do my friend!!! Hopefully it won't be long before it's all finished!!! Can't wait for the next video!!!✌️✌️✌️

Bro you the best u just gave me so many damn ideas that i want to do in my 99 suburban thanks for the video bro

I love the look of the B2 Audio Reference amps. They resemble the old school Soundstream Reference amps. Nice clean looking amp. Plus being that it is B2, it performs just as good as it looks.

Whenever you get the time to work on the truck I'll be here waiting patiently to watch it 👍

Sounds like Baby didn’t like all the noise. Looks good man! Can’t wait to see the whole thing finished.

You have really found the way to make the square peg fit in the round hole and have it look badass. Thats gonna be one nice amp rack. I love it man

@meade916

5 жыл бұрын

it's just a platform to build off of so far...but thanks a lot Boss Hogg!!

@jonas2431

5 жыл бұрын

@@meade916 no problem

Steve is the GOAT

In a tight situation like that, I use a #1 flat tip screwdriver bit to get to the gains. I also made some jumper wires with alligator clips for my DD-1 and CC-1 leads. That 4 channel amp is gonna be a pain to deal with when you set the gains on it though. At least it looks like it.

Clean and effective. Nice work!

I wanna see the factory sub being taken apart good video idea

That b2 amp looks realy nice

I had to go way back. I had to remind myself how spoiled we are seeing you in the shop. I remembered seeing you upgrading out of your garage. Damn. Compared to the shop your garage is small. Imagine trying to work out of there now.

Can't wait to hear some thumpin bass coming from those B2 6" Subs

Lol little blooper...keep um coming

I really enjoy these types of videos. Thanks for being you man.

Some of the best custom installs I’ve seen. Too bad I’m in Houston. My F150 Sony system could use an upgrade.

Baby is the cutest dog on youtube.... 😂

Looked like you where trying to dace @ 9:33

Nice install bro! PS love the background shop noise, wish the shop I work at sounded like that throughout the day.

I admire your on-the-spot engineering. Good shit!!! 👍👍👍

who would have thought in 2019 steve would be making templates with a stationary light saber god i love tech

I am always looking for a new video from your channel so that I can learn something new

NICE VIDEO AS ALWAYS I LOOK FORWARD TO ALL THE NEW BUILDS NICE WORK BRO LOOKING CLEAN

Hell yeah bumping the ol celly cell keep up the great work and videos bro

Every time I watch one of your videos man you always very clean work and no worries man we all scream when the metal is hot lol

Can't wait to hear it and see its final form. As always, thanks for the video.

My favorite youtuber hard at work!

The Steve Meade Shuffle is back!!

Nice work Steve. Top notch as always

You might want to put some matte clear bra, or some kind of protectant on the corners of the sub box. I can just see kids and the dog jumping in and out scratching up the beautiful sub box.

I love this guy

Nuthin like having great toolz to get the projects looking good Bro😎. Hats off to ya. Keep up the great werk..

You should do an outtakes video

No need to rush man, take it slow and great.

Yes

I like the dance moves at 9:32

REALLY looking forward on how you hook that DAC up to the factory system - thinking about doing something similar down the road with my 19`.

Bumping that "Berner" in the background!!👌😎 lit!

AWESOME VIDEO AS ALWAYS STEVE CANT WAIT TO SEE THE NEXT ONE!!!!!!!!🔊🔊🔊🔊💯🔥

love this truck, love this channel love your creativity. I could only wish to be this creative on a daily basis hahaha

Can’t wait to see how it comes out great work

BigJayDogg3 thanks man as a kid I just went for bang now I'm older and want a cleaner sound. Appreciate it!

I can't wait to see when you are done with this.

"What a piece of shit!" Lol classic

The suspense has been killing me but it's been worth it.

Looks good can't wait to see the final result. 👍

Was waiting for this one,great job again 👍as always 😉

Dang if I had a CNC machine I would be doing some sick shit in my 19 F250.

Hello steve nice job can i ask something?? When you upgraded the lexus IS-F so many years ago one music i cannot find. It's Psyph Morrison FUCK EM (track) the one in the video when you showing the media player... And this one i can't find. Can you help me what is the song's real name?

@meade916 Don't trip, it's your build for yourself. You have been doing this for years. No need to stress that this build is taking a few weeks or months longer... We know you a busy. And hope it stays that way for years to come. Work on your stuff when you can. That's life. I like drifting, cornering, dirt jumping and more, etc...

Cant wait I'm ready to hear this truck...

Love your content Steve keep up the hard work

looks good man awesome work steve

Great video can't wait to see the finished product

Love it! You're a God at car audio.

perfection takes time Steve

would you just look at Steve's dance moves on his machine's!!!. install looking good

Looks good and is coming together nicely!!

Beautiful work my brother

I can't wait for it to be done

Could you do a amp test tuesday on a wolfram c2400.1d? Thanks I hear they are good but i trust your dynos.

My favorite part of the video is the tap dance routine on top of the routing table! :)

@meade916

5 жыл бұрын

gotta make the template tape stick! lol thanks! :D

How do those b2 6.5” subs compare to a sundown 6.5 v2?

Cant wait to see it done

Been waiting for this vid for so long

U always put out legit work!!

Mac Dre part of the daily mix 👍🏻👌

I love when u show how to upgrade card into a better sound sistem