😩😩😩 why am I just seeing this!!!!🙏🏽🙏🏽🙏🏽super life saver thank you. Every shop known to mankind kept trying to charging me 300 and better saying they had to remove the bumper in order to gain access to light 😩😩😩😩

@07Review

Ай бұрын

Awesome, now you can do it your self and buy the ones on the link below 👇 or any other one, Ford is ripping off their customers with their crazy prices. GOD BLESS!!!

Lifesaver… saved me a lot of time.. took me 30mins and some patience.. great tip about taping the screw✌🏼

@07Review

4 ай бұрын

Great to know brother, made my day! ... GOD BLESS YOU!!!

This worked for me on the 2013 Ford Explorer. I only did the passenger side and it was tight. The driver side looks even tighter. Thanks!

@07Review

3 ай бұрын

Awesome! GOD BLESS!!!

Thank you so much. This was the best informative video I’ve seen for these bulbs. You are right, what a pain. Thank you for sharing the bit size T10

@07Review

2 ай бұрын

My pleasure, Thanks GOD it works for you!!

You are a man of the people my friend - blessings!

@07Review

4 ай бұрын

Thanks brother, thats the purpose to help each other! GOD BLESS YOU TOO MY FRIEND!!!

Awesome tip about the tape. Just knocked these out. It was a "PITA" but they're good to go. Thanks!

@07Review

8 ай бұрын

😂 awesome brother, thanks GOD I was able to help...

Amen brother, thank you for this! May GOD Bless you and your family!

Very helpful. i did the same for my Ford Explorer. Not as hard as it sounds but definitely need to make sure not to lose the screws.

@07Review

9 ай бұрын

Lol, thank you! , you are correct! Those screws are golden! GOD bless!

I did it to my Escape 2013. that tip helps a lot. thanks. I save $800 dls. dyi!! 😎😎😃😃😅😅 it take me 2 hrs to change it, both.

@07Review

9 ай бұрын

Wow... it is good to know!! it is insane how hard and difficult it is to change these lights. Thanks 😉 GOD bless!!!

--electrical tape, --Model# 48-32-4676 Milwaukee SHOCKWAVE Impact Duty 3-1/2 in. T10 Torx Alloy Steel Screw Driver Bit (2-Pack) --Model# DWA6EXTMF DEWALT MAXFIT 6 in. Bit Extension --Any 6" t-10 driver to break the torque in the beginning and tighten in the end --and of course your bulb but I just bought it online from the ford dealership in which that's how i get the discounts on purchases. Still can pick it up from your local dealer the same day so yeah. --Exact parts I used and oh, I was a bit nervous with the screw so i used a 1/2 tbsp measuring cup to slide in beneath the screw while taking it out! --i used needle nose pliars to pull the cord, that was the toughest part for me at first but you have to apply force and wiggle down and it pulls right out or more or less right down lol.

@07Review

2 ай бұрын

Wow😅.... Awesome brother, GOD BLESS YOU!!! You made it!!!😎

Stupid coolant overflow is massively in the way.

It's really hard to look where the screws are. I can't see them. I have been trying for 2 days how to get them off. The good news is I got 2 bulbs on Amazon for $30.00.

@07Review

7 ай бұрын

Use your phone camera or a mirror as a guide.... I did it with the phone

Hi I am considering trying this because I can’t afford a shop. My question is if I accidentally drop a t10 screw? Can I buy a pack of them just in case or am I out of luck if I drop it? Also how much would the magnetic tool be ? The only thing I have right now is tape 😞

@07Review

14 күн бұрын

Honestly if you tighten the tape the way I did you won't have any problems even if you don't have a magnetic screwdriver, the tape is more secure to be honest because after you done you have to pull a little hard to get the screwdriver out so don't worry, honestly I don't know where the screw will go if it falls 😂 maybe it is nothing crazy, also I don't know if Ford sales this screws, they should be, if not pull one out and check at Home Depot or Lowe's, also check the link down below I have a 2 magnet tools there. good luck and GOD BLESS!!!

Thank you for u help

@07Review

6 ай бұрын

Thanks for watching 😊 GOD BLESS YOU!!!

Makes sense to pull the cord first maybe

@07Review

6 ай бұрын

maybe!

Amazing your a gent ! Thanks so much for the tutorial you've made my life so easy now mate ! I've just Subscribed looking forward to more brilliant videos thanks so much

@07Review

2 ай бұрын

Thanks brother, very kind, GOD BLESS YOU!!!

Good video - what a pain!

@07Review

11 ай бұрын

Thank you!!. Yes... this vehicle is a pain in the neck, my toyota yaris takes 1 minute to replace the bulb 💡 😑

You may need the H11 bulb or the 9005 bulb, depending on your model. I have the SE and needed to 9005. Pull your bulb first to be sure. Btw, the 9005 is a longer buib and harder to remove. I assume the assembly is designed for the shorter H11 bulb but some a-hole engineer switched to 9005 without a care how the customer would be affected. I could not get the rear reservoir clip to release. From a tip in another video, I made a string lasso and was able to pull the wire harness into place and snap the bulb in. I did after getting the tip of the bulb into the hole but prior to seating it fully and twisting it into place. All-in-all, a horrible design, as is the battery location on this vehicle. A customer should not have to take their car to a mechanic for these simple tasks.

@07Review

11 ай бұрын

Absolutely correct, that's why I am moving from Ford to Honda and Toyota, most of the replacing parts in this vehicle are a real pain 😢

Can I put this on a 2013 Fiord Edge limited ?

@07Review

5 ай бұрын

No idea, check if it works, if not just send it back.

@Walter_SNZ

5 ай бұрын

It worked

@07Review

5 ай бұрын

@@Walter_SNZ Awesome 👍