1227 NM at the wheels? God damn, lethal.

Man the ease of power fron these turbo falcons is crazy....booya

love ya work ali!, cant wait to c my beast pumping out some mental power on your dyno!

This car sick. U can't see on the street. So cool

Great power gains from these turbo Ford Inline Sixes!

It is running adequate boost as per mods. This is running a high compression engine, vertically no lag. Street weapon.

Car itself looks fucking amazing

Car looks awesome

what wheels are these?

does anyone know what these wheels are called?

How much did the car run on the dyno stock?

It is running 275 on the rear

Look stuff, hopefully the XR6 Turbo BA/BF will become popular like the VL Calais 10 years ago. Wanna see more 10-9 second street cars. And what rims are they?

@gtits1162

Жыл бұрын

You’re wish has been granted

from factory stock, around 330hp. (Wikipedia)

Does not sound like the car is even breaking a sweat with that dyno

I know you blokes to a good job .. And I don't want to question a professional .. But is the engine just one of those standard freek engines that sometimes come off the showroom floor,? or did the owner not tell you it was a forged engine? Because a 35/40 turbo with ported waist gate on a standard exhaust manifold with a standard uncracked engine ain't guna flow 436rwkw through a standard manifold common.

@ballsbane

10 жыл бұрын

A forged... engine..?

@umairkhalid9468

6 жыл бұрын

Hope u know this engine is as good as F6 engine having similar strong internals. Also E85 capability offers another good 100 kw on the wheels

@dionjayw

4 жыл бұрын

He literally just said it has intake plenum, upgraded cooler piping, and a modified turbo lol.

curious why are you running such low boost on e85? also what size tyres are they, they look rather large?

@dozza04

10 жыл бұрын

Yer considering people have run 38psi

@dozza04

10 жыл бұрын

Is this your car?

@Monstero5o

7 жыл бұрын

the engine in this car is a 4L barra, you dont need alot of psi to make insane power. Ive seen BarraT running 26psi making 1000hp with water/emth injection and a LPG fuel system not e85 or 98 lol

The engine is a factory fg lpg motor with bolt on bits. Not a bullet proof combination unfortunately. This car is currently at another shop having a new engine built as the previous ones life ended due to issues being such high compression bit after a year once leaving bta. Bta are very good at what they do, however this combination was pushed to hard. No fault of Bta.

@shaunthomas9087

8 жыл бұрын

hi Nathan basically detonation was the case a compression test carried out by another reputable tuning shop reveled a 33% loss of compression in two cylinders blow by was evident. Rebuild was required.. but owner sold it for peanuts and moved on. Valuable lesson learned there I think...

@shaunthomas9087

8 жыл бұрын

hi Nathan basically detonation was the case a compression test carried out by another reputable tuning shop reveled a 33% loss of compression in two cylinders blow by was evident. Rebuild was required.. but owner sold it for peanuts and moved on. Valuable lesson learned there I think...

@shaunthomas9087

8 жыл бұрын

A costly mistake It goes to show don't buy someone else's problem... From what I hear the owner bought a new FGX XR8.. doubt they will be taking it to bta for a tune. lol

@yjkader

7 жыл бұрын

430rwkw on a pre 06/06 (non BF2/FPV) bottom end is too much. This combination should not have been pushed much further than 350rwkw to remain reliable.

how much does something like this cost?

@CoreyRichardson1

6 жыл бұрын

40 000

@plumby7685

4 жыл бұрын

Corey Richardson 🤣🤣🤣

@Smerdzy

2 жыл бұрын

@@CoreyRichardson1 nah not that high for this power level

BTA A quick Question if I may? this Falcon has to have a forged engine right..? 436 kW at the wheels..... common .. Lol

@rodwrecker

6 жыл бұрын

melbailey83 you have a barra as your profile yet you dont know they can break 400rwkw easy with stock internals?

@Elguapo93

5 жыл бұрын

Afyer 06 BF models they have typhoon bottom ends.

@blumie006

4 жыл бұрын

Any factory barra cylinder head and block will make over 1000hp no probs

What wheels are these?

@Adamzn6

7 жыл бұрын

cooper sambell Work GT5's in probably 17" or 18"

@umairkhalid9468

6 жыл бұрын

Seems like something from JDM or DTM. Definitely not simmons

So why can't America get these cars when *we* own them? Ford is American! This is some crazy shit to me.

@baileyvandenbosch9892

7 жыл бұрын

These have Australian developed and engineered engines and chassis so it's part of ford yes, but it comes under ford Australia not ford in America. Example: Americans get the Taurus and the crown Victoria from back in the day, Australia never got those because they were manufactured by the ford America division and developed for American roads. Xr6s are only in Australia. You can import them I believe to the the states which would be worth it cause they are fucking quick when they are stock even. But for d America may not be able to help you if it shits the bed :)

@yjkader

7 жыл бұрын

BeyondEllisBeck Ford Australia's parent company is Ford, but they do have their own budgets and operate as if they're independent. This has its pros and cons, like we don't get the Raptor, just got the Mustang but not the 350, and we're paying over 50k for the ecoboost V6.Holden/GM, same deal - no Corvettes sold here, no Charger/Challenger. Don't complain my friend, yous have it alot better there.

@doctorhelicopter

6 жыл бұрын

BeyondEllisBeck Ya can chuck a turbo on anything. Most of the bits on a real fast one is custom anyway.

@ElBantosClips

6 жыл бұрын

Apparently these engines are in forklifts over in America haha

Be this car cost over 50k easy

BA's are better. 😘

@Elguapo93

5 жыл бұрын

Phoenix One how is a BA better than a BF? Lol