I could sit in that field and listen to that ford all day
@frjoethesecond3 жыл бұрын
3:49 I love the resonance you get when you rev the tractor with the PTO engaged. Sounds of childhood.
@paddyrhatigan15906 жыл бұрын
That Ford, looks and sounds mighty. great blow of grass. no substitute for loads of power.
@olivierfulcrand684111 ай бұрын
FORD IS GOLD 💪👌👍 SIMPLY THE BEST 💪👍❤️
@ethanearle94573 жыл бұрын
That man on the pit is rough on that little tractor
@muhamadhafiz38985 жыл бұрын
I like this sound.
@MegaVolvic23 сағат бұрын
10/10
@ronnyvanhuffel472310 жыл бұрын
This is a very high speed harvesting. We had an Ugerlose in the past (20 years ago) and had to drive with it much slower. Else the single chopper couldn't handle it (cutting to long). We used it also many years for silaging. But mostly it was for summerfeeding the cattle.
@paulherlihy92903 жыл бұрын
It makes sense using a c100hp tractor with a single chop harvester, it facilitates cutting at a faster speed. Using such kit may seem dated however imo with the way climate change is happening with wetter summers coming, perhaps smaller harvesters with smaller trailers will the way to go.
@johnwmurphy11 жыл бұрын
Great video enjoyed that 10/10
@paulodriscoll749811 жыл бұрын
we were at silage with a jf 1300 single chop last week right fun using them
@djtouchdown11 жыл бұрын
The Gyro looks very much like a Taarup harvester.
@handerbirdy76712 жыл бұрын
Back in the days
@jjjjjtttttkkkkk11 жыл бұрын
great video
@footyirl214611 жыл бұрын
Nice ford quite rare
@alanchatfield55333 жыл бұрын
7910 with a tweak is 120 on the shaft, this one looks to be standard
@stephenfrench10605 жыл бұрын
Can't beat power /help /weather if you can get it
@TomH11210 жыл бұрын
how is it breathing through that pipe?!
@Droledope11 жыл бұрын
That ford need a better exhaust, that one to narrow. lots of back pressure. taking power from the tractor.
@noobstere11 жыл бұрын
silgle chop FTW
@declantractorvideos11 жыл бұрын
i am thinking about it i have built a rc jd 7400
@andykane4398 жыл бұрын
she's fairly singing
@Braco-qi8zm10 жыл бұрын
Is here PTO works on 1000 or 540 because i have old Ugerlose similar to Taarup and working with Zetor 6911 but there is no way that mine harvester can cut grass on small pieces like this?
@fnh834011 жыл бұрын
Its not so long ago that 90% of silage was done this way, there appeared to more time to get things done then.
@thetwoboyos8366
5 жыл бұрын
Youre dead right.. I think there was more time allowed to get things done... Dont think silage was as universal as a feed harvest, hay was more popular with smaller farmers, big farmers had silage pits... Wrapped bales was an introduction to silage for the smaller farmer.....
Пікірлер: 31
I could sit in that field and listen to that ford all day
3:49 I love the resonance you get when you rev the tractor with the PTO engaged. Sounds of childhood.
That Ford, looks and sounds mighty. great blow of grass. no substitute for loads of power.
FORD IS GOLD 💪👌👍 SIMPLY THE BEST 💪👍❤️
That man on the pit is rough on that little tractor
I like this sound.
10/10
This is a very high speed harvesting. We had an Ugerlose in the past (20 years ago) and had to drive with it much slower. Else the single chopper couldn't handle it (cutting to long). We used it also many years for silaging. But mostly it was for summerfeeding the cattle.
It makes sense using a c100hp tractor with a single chop harvester, it facilitates cutting at a faster speed. Using such kit may seem dated however imo with the way climate change is happening with wetter summers coming, perhaps smaller harvesters with smaller trailers will the way to go.
Great video enjoyed that 10/10
we were at silage with a jf 1300 single chop last week right fun using them
The Gyro looks very much like a Taarup harvester.
Back in the days
great video
Nice ford quite rare
7910 with a tweak is 120 on the shaft, this one looks to be standard
Can't beat power /help /weather if you can get it
how is it breathing through that pipe?!
That ford need a better exhaust, that one to narrow. lots of back pressure. taking power from the tractor.
silgle chop FTW
i am thinking about it i have built a rc jd 7400
she's fairly singing
Is here PTO works on 1000 or 540 because i have old Ugerlose similar to Taarup and working with Zetor 6911 but there is no way that mine harvester can cut grass on small pieces like this?
Its not so long ago that 90% of silage was done this way, there appeared to more time to get things done then.
@thetwoboyos8366
5 жыл бұрын
Youre dead right.. I think there was more time allowed to get things done... Dont think silage was as universal as a feed harvest, hay was more popular with smaller farmers, big farmers had silage pits... Wrapped bales was an introduction to silage for the smaller farmer.....
can you do a model tractor video
wsss
paula call me house