I am located in georgia. The parts came from cobb county tractor. They were not to bad. I think around 100 for the seals.
@russellhancock97653 жыл бұрын
My Dad's Uncle bought Our 3000 Diesel a month or so before I was born in January of 1968. My Dad says that Ours doesn't have the 13mm bolt in the back of the pump like You are talking about. I know it is the original pump, because I know My Dad's Uncle rebuilt it with rubber washers like You put on House Facets with. I don't think if the older models had a different pump or what. I am thinking that it probably came from England because Diesel Tractors were pretty new back then.
@mathewwahl85926 жыл бұрын
I have to replace the power steering pump on a ford 7000 series diesel tractor. Are the bolts to remove the pump behind the filter? Also it looks to run off the cam shaft gear, is the power steering pump gear have to be timed with everything else or not???
@andrewmartin42583 жыл бұрын
Excellent video. You can disassemble the cylinder to replace the piston O-ring. I've posted a video of doing that. If you don't mind I'll post a link.
@matthewlewellen6516
3 жыл бұрын
where is the link?
@andrewmartin4258
3 жыл бұрын
@@matthewlewellen6516 It looks like the link may have been removed. Maybe it was improper for me to post it. I really don't know. The title is "Ford 335 Steering Cylinder Repair". kzread.info/dash/bejne/hououbyoZpWaiso.html
@Brian-ig8zx4 ай бұрын
Do you fill the canister completely up with oil and what oil did you use?
@jorg4u16 жыл бұрын
I'm having the same problem with my ford 2000 cylinder seals are leaking.how did you press the seals?
@londondudley349229 күн бұрын
I have a ford 2000 tractor and after replacing the power steering cylinders both of them are bent now. Can anyone help me with the issue?
@gravelydude14239 жыл бұрын
Great videos. I also had to replace the upper seal in the steering column on my 3400. Not too bad a job. Where did you get the seal kits for your cylinders? Were they outrageously expensive? Thanks, Jack
@edsimpson9639
6 жыл бұрын
my 3400 power steering works good for 15 min. then it almost stops working?
@rlneal1006 жыл бұрын
Did you replace the O-ring for the power steering canister? If so did it come with the filter kit?
Пікірлер: 13
I am located in georgia. The parts came from cobb county tractor. They were not to bad. I think around 100 for the seals.
My Dad's Uncle bought Our 3000 Diesel a month or so before I was born in January of 1968. My Dad says that Ours doesn't have the 13mm bolt in the back of the pump like You are talking about. I know it is the original pump, because I know My Dad's Uncle rebuilt it with rubber washers like You put on House Facets with. I don't think if the older models had a different pump or what. I am thinking that it probably came from England because Diesel Tractors were pretty new back then.
I have to replace the power steering pump on a ford 7000 series diesel tractor. Are the bolts to remove the pump behind the filter? Also it looks to run off the cam shaft gear, is the power steering pump gear have to be timed with everything else or not???
Excellent video. You can disassemble the cylinder to replace the piston O-ring. I've posted a video of doing that. If you don't mind I'll post a link.
@matthewlewellen6516
3 жыл бұрын
where is the link?
@andrewmartin4258
3 жыл бұрын
@@matthewlewellen6516 It looks like the link may have been removed. Maybe it was improper for me to post it. I really don't know. The title is "Ford 335 Steering Cylinder Repair". kzread.info/dash/bejne/hououbyoZpWaiso.html
Do you fill the canister completely up with oil and what oil did you use?
I'm having the same problem with my ford 2000 cylinder seals are leaking.how did you press the seals?
I have a ford 2000 tractor and after replacing the power steering cylinders both of them are bent now. Can anyone help me with the issue?
Great videos. I also had to replace the upper seal in the steering column on my 3400. Not too bad a job. Where did you get the seal kits for your cylinders? Were they outrageously expensive? Thanks, Jack
@edsimpson9639
6 жыл бұрын
my 3400 power steering works good for 15 min. then it almost stops working?
Did you replace the O-ring for the power steering canister? If so did it come with the filter kit?
Buy a tripod