I put that on my 20 6.7 except mine is the aluminum color. Had mine on for about 35000 miles doing hotshot trucking with it. It most definitely makes a difference in the tranny Temps. It stays much cooler. Never have got the Trans Temps up above 225 even with 30k lbs pulling up the steep grades in the west. I love it!

@herveyforward5956

Жыл бұрын

Thanks for the feedback. I notice towing our 30 ft Airsteam them trans temps can get scary hot

@garlandmeredith2039

Жыл бұрын

That’s still stock temp. 8qts additional fluid without a fluid circulation increase has potential for holding heat instead of offing it.

@thecracken9855

Жыл бұрын

@@garlandmeredith2039I think that’s a good trade off considering that he’s pulling 30k pounds up steep grades and not going over stock temps.

@MarkSmith-cz3by

Жыл бұрын

@@garlandmeredith2039aluminum dissipates heat very efficiently especially with internal and external fins with all that cooling air rushing by underneath the truck. The stock pan is plastic which is a great insulator as far as holding in heat, exactly what you don’t want.

Just finished my trans pan swap and transmission flush thanks for the vid Arod!!

Excellent!! I've been asking for the "how to" for a long time and now it is here! Trans fluid change is coming! An extra 8 quarts! WOW!

Thanks for showing us how it’s done ARod. The PPE pan looks great. I like the practical difference of keeping the tranny cooler. Reasonable price for this quality. Since I’ll be DIYing this, I’ll need to find a fluid transfer pump to get it filled from under the motor.

Great video…. Can’t wait to put mine on. I have both the oil and trans pan ready to go on when it’s time to change my oil….👍🏼

Serviced mine at 27340 miles, definitely doin it the PTT way 🤘. Pretty happy my 6R has a dip stick, pretty bogus they did away with them

Thank you for another informative video. Adding this to the list! The Mod Father continues to deliver great content. Thank you!

@PowerStrokeTechTalkwARod

Жыл бұрын

😝😝😝😉😉💪💪

@lakorai2

Жыл бұрын

Definately doing to my ranger when I hit 100k miles

I,did the pan and filter upgrade on my 2005 F350 DRW With The pan and much improved FT180 Filter from the switch to The 6.4l and you can also eliminate The bypass filter, the small roll of toilet paper, you have to get that pan as it's a little deeper to allow for the new full flow filter. No more rock catcher as the 6.0 Trans filter was referred to.

Great video, nice to see the fill procedure IRL.

I am about to do this job, thanks for making this video. Super helpful!

Brother, I always appreciate your educational videos! Thank you and keep up the excellence!

@PowerStrokeTechTalkwARod

Жыл бұрын

🙏💪🙏💪🙏

Excellent work and commentary there Dr Arod! Question, does the trans get to temp while just idling? Thx as always 💪🏼💪🏼

Awesome products for my Super truck! Thanks Arod! 👊

Installed a PPE cover on my 19 F150, 5.0L. Started in my garage, when I figured out I had to jack up the trans, I went to b plan B. Took it to my local guy. Still worth every penny, I can’t get past the plastic pan.

best video on trans service really helpful cheers

Total honesty flatbed tow truck 20/20 model 7.3 gas 10r140 trans has 175,000 miles on it transmission still running strong after two services minus a hard shift into sixth gear

What a great and helpful video! I like the pan. Cooling fins and a drain plug. Why can’t the manufacturer’s put in drain plugs? So much less messy.

Great video appreciate the content and support man definitely different then the 10r80 with the plastic dipstick I just changed the fluid only with a pan drop next time I’ll going to suck it out immediately tell the difference to started shifting smoother !

Great video. The pan looks awesome. Being able to use the factory bolts and gasket is a nice touch. Makes future services easier. That pump jug is cool. Saves time.

Can't wait to get my F-350 6.7. Build week is Sept 5th... Looonnnggg wait. Coming from a 2004 Ram 1500 🤣🤣She only saw 1 year of salt in Detroit and AZ/FL since, so it lasted. The new truck will be a beast and since I enjoy working on my vehicles, your videos will be super helpful!!

@PowerStrokeTechTalkwARod

Жыл бұрын

Thanks pal

Just in time as usual! I’m about to do a pan drop and fluid change

This is what I have been waiting for!! Gonna have to wait until the trans gets fixed though😒

I always put down a big blue tarp before oil or trans fluid changes…….when I used to do them. Now that my back is screwed up I take it in to have it done.

Been waiting for this 🙌

Honestly if you wanna run cooler temps, Misimoto Trans Cooler, put mine on last weekend and pulled the same grade with 12k, before I was 228 by the time i got to the top, after the install i was at 207. I used to have a engine and tranny temp run close together now I have a true 14 degrees difference, I'm 180 trans/194 engine running empty at 70. Before the trans was 190 empty and the best thing you only add 2 quarts more

I would get a pole jack with a block of wood with a rag on top to hold the pan going back together, because pulling the threads out of the transmission case sucks.

Just to add to arods awesome video a stock pan 10r140 holds a total of 18.1 qts of ULV fluid so if you add this pan it increases to a total of 26.1 qts of fluid that’s insane

That's a sweet pan!

Fords easily the best trucks out there . Your not beating these newer 6.7s absolutely love em and thats coming from someone who's owned one of the big three at some point .

@PowerStrokeTechTalkwARod

Жыл бұрын

Coming from a tech who is committed to knowing the product to the best of his ability can say that hands down best rigs on the road💪🙌

@dieselnut2369

Жыл бұрын

@@PowerStrokeTechTalkwARod you da man ARod keep doing your thing buddy! Love the videos!

@timsmothers8740

Жыл бұрын

One word CP4 !

@dieselnut2369

Жыл бұрын

Everyone suffered from cp4 failure it wasn't just ford . I do give dodge credit for going back to the cp3. Also I kinda feel that the cp4 bs is kinda overhyped because of dummies putting def or gasoline in their fuel tank . But either way this problem wouldn't stop me from buying ford 🤷‍♂️

Great video

On my car I just change mine every 30k or about every 3ish years with the trans pan gasket and trans filter. Go back together with Mercon V fluid and Motorcraft filter. And I use the left over fluid to flush the power steering since its the same fluid on my old Crown Vic. I don't trust anyone else to do my transmission fluid service. Most cause I mess up my trans case threads for the pan bolts. 2 bolts are sort of stripped and I put in some standard bolts that at least thread into the case, those 2 bolts must go back into the same hole. Also on my old car it has a torque converter drain bolt so I can drain about another 8 quarts.

Sweet cover

I use a remote spin-on filter WIX 57701, I'd like to use a fluid pickup instead of the filter.

I’m wondering what part of the country your in because I would definitely bring my truck to you it’s refreshing seeing how enthusiastic you are about these trucks!!!

@PowerStrokeTechTalkwARod

Жыл бұрын

Deeeetroit

Awesome video & ppe pan!!!😉...How much money did Ford save deleting the trans dip stick & drain plug???🧐...(hell the techs and/ or customer don't need them)🥴...later my man & have a GREAT WEEKEND!!👍💪💯

You the man👍🏻 keep up the good work, love your channel, but my bank account doesn't agree with me after every upgrade.

dam it looks very nice

Thanks!

I change my filter and do a full flush, to change all the fluid, not just the half that is in the trans every 30,000. When i switched from the factory fill Motorcraft ULV to Amsoil LV ATF, my trans temp when down 10 degrees and the shift feel is much better.

@mcmuskie2563

23 күн бұрын

Agree, so much better!!

@jasonwhitson4010

Күн бұрын

How do you flush all the old fluid out?

@PowerStrokeTechTalkwARod

Күн бұрын

@jasonwhitson4010 drain and fill baby, I'm not a fan of flush machines but others will disagree

Put a forma funnel on the trans cross memeber, a lot less mess

Hey man love your channel helps me out a bunch. What do you think about drilling a small hole the plastic pan to drain since your not reusing it. Getting ready to do this to my 22

@PowerStrokeTechTalkwARod

3 ай бұрын

You could, but it's really not that big of a deal

Nice job I thought Ford was going Tundra w/o a dip stick...what about the heat shield.

My 450 Platinum comes in any day now on estimated delivery schedule so I can’t wait! 20 quarts though, my goodness 😅🙃

@duconce

Жыл бұрын

That's $150 for the fluid, those days of the 4 dollar qts are long gone

I didn't see where you lowered the pickup to circulate those extra 8 quarts. Isn't that necessary to keep the extra fluid moving throughout the transmission?

CHANGE the ATF in the trans pan or FLUSH the trans of ATF? ALL auto transmissions have a pump, that can be utilized to FLUSH the trans ATF . CHK how I did a driveway FLUSH- kzread.info/dash/bejne/nYVtu5aCqJCWpJs.html !

Nice to see that you take pride in your work!!! I have a 22 f350 with the 7.3 godzilla, and i sometimes get hard shifts. It only has 16000 miles on it. Would you recommend a service or is a reprogram the fix? Really liking the extra pain size!! Excellent how to video!!!

@PowerStrokeTechTalkwARod

7 ай бұрын

Read them comments pal, it compatible with the gassers

I’m going to need to file for chapter 11 if I keep watching your videos. 😂 Been wanting to install their pan since they released it and now I’m considering the oil pan too. Just need to find that money tree. 😂 Much better than the F150 trans pan. I never got around to doing it on my F150 because of how much of a pain it was to remove and fill. Glad they got rid of the stupid little plastic dipstick and exhaust running under the pan on the superduties.

@PowerStrokeTechTalkwARod

Жыл бұрын

😂🫂😂

@himni1

Жыл бұрын

@@PowerStrokeTechTalkwARod how much is the fluid per quart? Amsoil is $15.37 per quart. So another $300~ for the fluid. Gonna have to refinance. 😂

@PowerStrokeTechTalkwARod

Жыл бұрын

Lolol

That should make it last longer and keep it a lot cooler!

Thanks Arod. Another great video. Looks like a nice casting, but comes at a bit of a steep price. Thou I suppose it’s cheaper than an early failure on a trans. Where’d or how did you make the nifty pump jug? Oh… can I use just one of the 13mm studs to hold the wire loom? Or does the flange on the new PPE pan interfere with the stud flange? Not sure why you didn’t use one stud there

@PowerStrokeTechTalkwARod

Жыл бұрын

U cld...i didnt want a studly do right therr. I went hf for the pump

Nice video as always! I’de like to see some test if this thing actually has any cooling effect. Have you noticed any knocking noises on the 10R140’s. Mine has made a knocking noise since day one that comes and goes. My truck was built 11/21. Thanks and keep up the awesome work. As a former mechanic, it’s always nice to see someone that takes pride in doing things the right way!

@PowerStrokeTechTalkwARod

Жыл бұрын

Thank you sir. Knocking noises...only coupled to the 7.3 zilla not the PSD

@mdburns

Жыл бұрын

Mine is a 7.3. She’s gone to the dealer at 9k miles and they said they have no idea. Just hope I don’t have one of the leftover 2020 transmission that had the torque converter problem? 🙏

@PowerStrokeTechTalkwARod

Жыл бұрын

Normal, all of em do it. I replaced an entire assembly to only have the same thing sound-wise, occur. Normal noise acoustics/ characteristics of the 7.3 & 10R140. FYI that PPE pan is only for 6.7....

@mdburns

Жыл бұрын

🙏👍

Exhaust heat shield go back on?

I want that and the oil pan... come on PPE, give us a PTT discount code 🙏

Got one on my 2016 ford f 250 why don’t you use the new bolts that came with the new pan

Nice video. I recommend if available to suck out as much fluid as possible before loosing the pan . Will make the job less messier. I agree with the 30,000ish mile fluid and filter change. I wonder if the person who owns this truck would mine reporting back with there thoughts on this pan.

@PowerStrokeTechTalkwARod

Жыл бұрын

Customer loves it. Has been towing like a mad man...says fluid around 220

@howardriggins4010

Жыл бұрын

Nice and yes these 10 speed transmissions are meant to run warmer anyway

Looks like another Thousand bucks, Lol. Nice video as always.

Didn't catch if you mentioned extra clearance on the larger pan. I tow a fairly heavy travel trailer and I'm excited about the idea of a cooler running transmission ('22 super duty with tow package). Thanks!

@PowerStrokeTechTalkwARod

Жыл бұрын

Extra clearance for....?

@raydavis5783

Жыл бұрын

@@PowerStrokeTechTalkwARod sorry I meant how much lower than factory does the new pan sit. 8 quarts would take up extra space.

@PowerStrokeTechTalkwARod

Жыл бұрын

Not enough to have anything to worry about, i can tell u that

Looks great but wish they had a flat spot in the fins for a pan heater. Even trans fluid needs some warmth at -30.

@brandonmiller3387

Жыл бұрын

Put it on the sides of the pan. Pan is all the way full anyways. 🤷🏼‍♂️

2017 80,000 miles

Ford power train engineers should have made the 1/2 ton 10 speed (10R80) pans this easy to remove and replace. Much better design on the Super Duty's placement of the crossmember.

Just got my oil pan and trans pan today 👍

Another benefit is aluminum won’t break down (crack) over time as plastic parts do.

Do you find similar results with the 6 speed trans on my 2019?

I try to avoid making a mess by using an evacuation pump to suck a significant amount of fluid out of the tranny before I drop the pan. I get it started and then go off to do something else while vacuum does its thing.

@PowerStrokeTechTalkwARod

Жыл бұрын

Yepp

What will happen if you don’t put the rubber piece off the old one on the new filter

I want that!

@PowerStrokeTechTalkwARod

Жыл бұрын

Lets do it, ill come over & we film for DS-TRUCKS

I don't understand why some of their pans have a place where you can bolt down the magnet from the stock pan to the new one but I noticed this one has no place for a magnet. I really like the job of that magnet. I guess one could go out and find a magnetic drain plug for it and that'll fix that.

@PowerStrokeTechTalkwARod

Жыл бұрын

The plug is a magnet

Any chance we could get the same for an F150, I tow a lot with a 3.5 2021

Didn't realize the days of the tranny fluid dipstick was gone too. Does the extra fluid capacity really serve a function? Or is it just that greater cooling area cooling more fluid? I mean it's still the same surface area. Doesn't really compute with me. You're still running through a cooler in the front. Seems to me that the same pan, just a little bit larger to clear the inner fins would work the same?

Who many quarts does a stock pan take?

Hi Arod, GREAT DETAILED VID and INFO. I'm about to install a PPE Pan on my 2018 Mustang gt with the 10R80. Q: Are the TORQUE specs for the Bolts and Studs on this Pan the same as OEM? Your feedback will be appreciated.

@PowerStrokeTechTalkwARod

3 ай бұрын

Yah. Tighten them then go back around & make sure they're snugged

Would something like this void the warranty?

Where is that oil pan made?

Awesome product! Thank you for the video. Question - is there a way to do a complete flush on a super duty transmission flying solo?

@PowerStrokeTechTalkwARod

Жыл бұрын

Not with outba machine

@TK2HOTSHOT

Жыл бұрын

I can live with this. Do you have a machine you can recommend?@@PowerStrokeTechTalkwARod

@PowerStrokeTechTalkwARod

Жыл бұрын

I do not use them

Love your channel but rarely see you use a torque wrench. I knew some mechs that could almost torque to the exact torque but having countless ford’s, they do have bolts that’ll break easily.

@PowerStrokeTechTalkwARod

Жыл бұрын

An acquired feell brotha.

Did this last week but with one hiccup... One bolt snapped (ugh)

Just ordered the pan. I want to do the oil pan next then the rear diff cover. You have a link to the oil pan video?

@PowerStrokeTechTalkwARod

Жыл бұрын

Already up player. Week late 😎😉

I have a new super duty. I’m in Michigan. How much for you to do this exact thing for my truck? I’d but the pan and everything. Can you give me a rough estimate? Thank you. Great videos

@PowerStrokeTechTalkwARod

2 ай бұрын

You'll have 2 email me bub, we dont talk $$$ here Powerstroketechtalkwarod@gmail.com

My 2019 SD 6.7 has the 6 speed transmission…does PPE make a up grade pan for mine? And is the MerconLV okay as replacement fluid? Thanks for everything. 👌🇺🇸

@PowerStrokeTechTalkwARod

Жыл бұрын

Yes LV! Check the PPE link out...they HAVE so many great Ford parts.

Just put my Pusher hot and cold side pipes on today and now this lol. I would probably benefit from this plowing. BTW my local dealer said that my 19 F350 (6 speed) the tranny oil didnt need replaced until 100k miles, is that right?

@PowerStrokeTechTalkwARod

Жыл бұрын

No fluid is a 100k. Theyll tell ya 30k on fuel fitlers too 🤦‍♂️

My last two trans oil changes (2021 F450 used for hotshot) resulted in overfill some how. Trans overheated and burped fluid out the vent. Anyone else experience this? Thoughts? First time happened work was performed by dealer. 2nd time by a reputable local tranny shop.

Are those transmission filter bolts also Valve Body bolts? Would want to make sure they were close to the same torque going back in.

@Kevin-yc4kg

Жыл бұрын

97 inch lbs and they go thru the main control to bolt it to the case there are 13 bolts total that bolt the main control to the case

16qts with the Ppe pan at running temp 185 degrees on trans

@PowerStrokeTechTalkwARod

4 ай бұрын

Just did 1 yesterday. Used 18

How much less road clearance does use of the PPE larger oil pan result in. Is there a factory skid plate that protects the stock transmission? if so, can it be re-ued with the bigger PPE pan? Lastly, where is the factory transmission temp sending unit. The PPE pan has a blank (or pre-threaded?) plug provision for a supplemental trans temp gauge. I assume that's overkill and the factory trans temp should still provide accurate readings? Nice job.

@PowerStrokeTechTalkwARod

Жыл бұрын

Did u watch the video brotha

Good video, only criticism i have is when you were putting the trans filter bolts in you impacted them pretty hard. Torque spec is only 94 in lb and 106 in lb (for stud bolts). You can damage that trans if you go too hard because aluminum is soft but otherwise good vid

@PowerStrokeTechTalkwARod

Жыл бұрын

Knowledge is key...i know my tools brother.....not saying im right.....you wanna put heads on....yes you torque em. Fuel injector hold downs yes you torque em. This kinda stuff, all feel baby no need to bust out the torque wrench. Thanks for watchin.

@zacharydavid5686

Жыл бұрын

I feel that man, It’s all preference and for some of these smaller bolts on aluminum I just prefer hand and torque! Appreciate the response!

@PowerStrokeTechTalkwARod

Жыл бұрын

I appppreciate you keepin' it real 😎🤝🤝

@olhesty2196

8 ай бұрын

Dude, I was thinking the exact same thing! Thank you for the torque spec brother! Do you know the torque specs for the filter? Thanks in advance.

30k miles. Filter change. Amsoil fluid

@PowerStrokeTechTalkwARod

Жыл бұрын

Done!

I just rewatched the video what’s your take on using Amsoil ATF in place of Mercon LV ? Thank you

@PowerStrokeTechTalkwARod

13 күн бұрын

We use it all the time. Been working real nice. Lil expensive but really good fluid

@gbjr2751

13 күн бұрын

@@PowerStrokeTechTalkwARod fantastic I will be using this in my F250 Tremor

How often should these transmissions be serviced? Thanks for the info!

@PowerStrokeTechTalkwARod

2 ай бұрын

Mine schedule is every 30k

Considering this pan for 2022 F-350 dually with 6.7 as way to lower trans fluid temp. Seems to peak at 212F with no load at 75mph on flat highway with 60F ambient outside. Is 212F temp too high? Will pan lower that temp to below 200F? Maybe I am over-thinking. Another great vid, Arod. Thanks much.

@PowerStrokeTechTalkwARod

Жыл бұрын

212 is nothin! Keep rollin good buddy🫡

@Charles-oy7ce

10 ай бұрын

I have a 20 f350 and my Temps hauling 28k and trans Temps never go above 202. 212 isn't terrible so you should be good

I"m about to do this to my 22! Quick questions: 1. Hope many quarts did you end up putting back in? Trying to figure out how many quarts I should buy. 2. Can I just use the bolts that come from PPE to reinstall the pan? Do I need the factory bolts for the heat shield? Trying to figure out if I absolutely need to buy the extra bolts too.

@PowerStrokeTechTalkwARod

10 ай бұрын

If i were you, Id re watch that video & do EXACTLY as you saw.

@SticksBlog

10 ай бұрын

I plan too. But I was wanting to get an idea on how many quarts you used so I make sure I have enough. And I guess the heat shield doesn’t get reused? Is that why you used the other bolts? I couldn’t tell from the video why you had to buy extra bolts. Thanks.

It looks like this fill/check plug is no longer in the 24 transmissions. Does anybody know how to check fluid level on 23 to 24? Thanks!

Ambulance Duty - 50K changes using Schaffer's.

Could you possibly tell me the Allen wrench size? I don't have one big enough and want to make sure I get the right one 👍

@PowerStrokeTechTalkwARod

3 ай бұрын

Gosh I can't remember

When Putting on a Deeeper Trans Pan Do You Need To Lower The Filter Deeper Into Pan, Extend Filter At All

@PowerStrokeTechTalkwARod

8 ай бұрын

No

Does this pan fit the 10R140 on the 7.3 too? PPE’s website specifically states 6.7, but I don’t know why.

@PowerStrokeTechTalkwARod

Жыл бұрын

As far as I know, it is for all 10r140. I wld call PPE to juss make sure.

I want to know how much it lowered trans temps. My truck trans temp is around 210 at 75 mph on flat ground.

@PowerStrokeTechTalkwARod

Жыл бұрын

Guy said he but it on his 2020 hotshotter, says it doesnt go above 225 now while towing. He was in the comments....

I just did mine and only got 17qts in

So you set the final level with the trans temp at 158f. The sticker says the temp should be higher at 180-215f for final level setting. What am I missing?

@PowerStrokeTechTalkwARod

Жыл бұрын

I have been checking it here and it has been juss fine.

Should we avoid the 10R140? I’m in need of a new truck but I wanted a 3/4 ton WITH solid axles vs IFS. That limits me to dodge and ford.

@PowerStrokeTechTalkwARod

9 ай бұрын

We love ours! Dont beleive everything you read on them forums

When you do a trans service do you rotate the converter to drain fluid out of it ?

@PowerStrokeTechTalkwARod

Жыл бұрын

Theres NO access to drain the converter

Unless I am missing something what is the filter part number ? Thanks bro

@PowerStrokeTechTalkwARod

Ай бұрын

I showed ya in the video