I’ve seen waste oil burners and thought I’d take it to the next level. Lots of trial and error but lots of fun.
Жүктеу.....
Пікірлер: 20
@Blxz2 жыл бұрын
Good looking stove. I'm halfway through building one this afternoon and it's good to see how different people approach the same problem.
@thebackyarder6565
2 жыл бұрын
Thanks so much, I hope you have good luck with your build.
@BDL0907542 жыл бұрын
Thanks pal, Good job, this deserves way more likes, Thanks
@thebackyarder6565
2 жыл бұрын
Thanks so much! Stay tuned for my other oil burner to come.
@okielicious2 жыл бұрын
Nice job! 👍 I have built many different kinds of oil stoves and I found that all my stoves need a safety overflow for the burn chamber so oil won't come out the air intake. Or liquid fire .. Over all your on the right track!
@thebackyarder6565
2 жыл бұрын
Thanks so much. I did have problems with over flow but controlled it with the drip feed. Once the dish about have full I slow down drip to find the happy medium. I run mine inside so slow and steady is safer then wide open.
@okielicious
2 жыл бұрын
The drip feed has to be constantly watched. Oil viscosity changes so much the drip will not stay the same. We can't trust homemade drip feed systems that's just the truth. So something to contain the overflow while it's burning off is next best thing. Providing you can shut off the supply in time. Over fueling is the hardest thing to figure out. Needle valve is pretty good but the oil has to be clean. Good luck!
@thelongranger558 ай бұрын
You can use steam to force hydrogen & oxygen inside the combustion chamber . Not only will it help burn hotter & cleaner you won’t have to use any sort of electric blower motor to force only oxygen into the combustion chamber. Purely an off grid design, Just saying
@laserfalcon2 жыл бұрын
Good overall simple design Wheels may melt
@thebackyarder6565
2 жыл бұрын
Thanks! Yes the wheels are getting to much heat. Stay tuned for my update vid and others like it to come.
@laserfalcon
2 жыл бұрын
@@thebackyarder6565 looking forward to
@motionsick9 ай бұрын
I want to build one but I don't trust the fumes over time not slowly entering the shop. Would like to have it outside and vented to pull air from inside shop run it outside to the Heater and back into the shop.
@thelongranger55
8 ай бұрын
Pulling air from in the shop is a better idea then outside air !
@arseniyseleznovveroboj1571 Жыл бұрын
Додати більше труб для підігріву повітря (4 дуже мало). Додатково закрити екраном, пластикове відро..
@billmccool1672 Жыл бұрын
Where do you get the waste oil
@thebackyarder6565
Жыл бұрын
I’m a mechanic and get it from multiple places, mostly from my buddies heavy equipment shop.
Пікірлер: 20
Good looking stove. I'm halfway through building one this afternoon and it's good to see how different people approach the same problem.
@thebackyarder6565
2 жыл бұрын
Thanks so much, I hope you have good luck with your build.
Thanks pal, Good job, this deserves way more likes, Thanks
@thebackyarder6565
2 жыл бұрын
Thanks so much! Stay tuned for my other oil burner to come.
Nice job! 👍 I have built many different kinds of oil stoves and I found that all my stoves need a safety overflow for the burn chamber so oil won't come out the air intake. Or liquid fire .. Over all your on the right track!
@thebackyarder6565
2 жыл бұрын
Thanks so much. I did have problems with over flow but controlled it with the drip feed. Once the dish about have full I slow down drip to find the happy medium. I run mine inside so slow and steady is safer then wide open.
@okielicious
2 жыл бұрын
The drip feed has to be constantly watched. Oil viscosity changes so much the drip will not stay the same. We can't trust homemade drip feed systems that's just the truth. So something to contain the overflow while it's burning off is next best thing. Providing you can shut off the supply in time. Over fueling is the hardest thing to figure out. Needle valve is pretty good but the oil has to be clean. Good luck!
You can use steam to force hydrogen & oxygen inside the combustion chamber . Not only will it help burn hotter & cleaner you won’t have to use any sort of electric blower motor to force only oxygen into the combustion chamber. Purely an off grid design, Just saying
Good overall simple design Wheels may melt
@thebackyarder6565
2 жыл бұрын
Thanks! Yes the wheels are getting to much heat. Stay tuned for my update vid and others like it to come.
@laserfalcon
2 жыл бұрын
@@thebackyarder6565 looking forward to
I want to build one but I don't trust the fumes over time not slowly entering the shop. Would like to have it outside and vented to pull air from inside shop run it outside to the Heater and back into the shop.
@thelongranger55
8 ай бұрын
Pulling air from in the shop is a better idea then outside air !
Додати більше труб для підігріву повітря (4 дуже мало). Додатково закрити екраном, пластикове відро..
Where do you get the waste oil
@thebackyarder6565
Жыл бұрын
I’m a mechanic and get it from multiple places, mostly from my buddies heavy equipment shop.
Rite on
who sell waste oil heaters?
@thebackyarder6565
8 ай бұрын
I have no idea, Ive never looked into it.