This is excellent! I live in The Bahamas and I find this very helpful. Thank you for posting.

This should be a basic concept. We all have to get instruction from a qualified structural engineer for the Architectural drawing. The strength of the concrete will depend on the country to country. Standard norms are ok. It may be changed in practical conditions. Quality of mixing water, Quality of the different types of steel rods with different manufacturers, Soil conditions wind force, and weather conditions. Appreciate the presentation

This is very good Engineer on earth may God provide more life for him.

@josephpinto8378

3 жыл бұрын

I like it 👍

Thank you for your usual succinct teachings, those this measurement for 2-3 story building also apply for 1 story building rcc footings

thank you so much. you are so helpful. keep up the great work and thank you for thinking of non civil engineers as well.

I learnt important things in construction of buildings..Surely it helps non civil engineering people ,great insight and while constructing their own houses

Loving these basic videos, even as a Civil engineer !!

Am really appreciate your content Sir May God gives yu a more life 💯💯 from Tanzania 🇹🇿

Thank you so much for such great information. God bless you and your family!!!!!

These are good notes for preliminary design, safety and economics will determine actual final results

Sir your content is very good and you are very consistent..Thank you professor from the philippines

Any scholarship in construction am ready I like the way u do, u are not selfish,I have learnt something from u, salaam alaykum

Vv nice vdu

Thanks very much for lectures. I live in Sierra Leone west Africa.

Very important information about Column nd it's footings.

Sir very clear explanation you done I'm not engr but I got an idea to you tnx very much sir God bless from Danny Tala of Philippines

Thank you Sami usthaz. Your tutorials are very helpful Usually when asked people will hide such information and not share.

@shikennoace7236

3 жыл бұрын

Pls usthaz, can i get any Mail ID ?

@shikennoace7236

3 жыл бұрын

Is there any book or pdf available related to on site knowledge ? I mean from setting layout, excavation, foundation, shuttering and information related to structure. I am a on site supervisor. Pls help sir

Useful content i'll be following you all mi life...

Am well convinced and interested in ur teachings and they are true,

Hi brother so happy of your videos very much helpful. referring the videos form chennai. thanks

Great Work Sir

Thanks a lot for very informatif lecture.

Thanks for the advise it much usefull.

You guys are highly knowledgeable

Great job love your explanations

you engineering problem solver. god bless you sir

Thank you for your help! Having these walkthoughs for several scenarios is great. These are stand alone columns. Any guidance on building with footings and also rebar bends?

@benardmwamba459

2 жыл бұрын

Hi sir this is great stuff ,I'm just a blick layer but with your teaching I feel already like an engineer thanks

thank you sir, it is very informative

🙏Thank You fir the valuable information , searching for🙏

Thanks. This is very informative. I'm planning to renovate my house and make it 2 storey with mezzanine floor in between for bed rooms.the top would be a roofdeck. I will use steel as columns and beam. The columns would be on top of the rcc footings/1ft above-ground column. Thanks.

@namakanthony1837

2 жыл бұрын

What is this rcc

Great work sir.

Thank you sir for the info.

You explain everything very clearly. Much thanks.

Very very good sir...

Good Info. Thanks

Thank you for your explanation

Good informetion for genaral peopls

Good and well understandable

Civil engineers now have software to plan which size of footing and the size & number of steel bars to use. I have a renovation now in my two story house, I used 1x1 size of footing and depth for additional colons using 6 16mm and 2 12mm steel bars for colon, my structural engineer said that’s still too weak that the house might collapse because they base on the civil engineering software computations.

Very good teaching . It is better to write your notes little bigger than you write at present , in small letters .So that we can see in mobile ...

Hi again. Thank you for all your work. Question, 1. i'm designing a 3 to 6 floor building for a Shore Front Resort. I can i present this method to my local Civil Engineer? 2. Can you demonstrate the method used for an inner Beam Pillar Structure? Thank you again

Its true explanation thank you

Sir, is it possible you make a chart or a table for all the requirements for beams and columns, their size, spacing, steel dia, number of steel bars, size of footing, type of footing, depth of footing, sbc, conc grade etc.. for domestic and commercial buildings from G+1 up to G+10? It will be very helpful and we will appreciate.

Very INFORMATIVE

thanks fir the info

My understanding is that the flood area should have a much depth foundation, in addition the foundation should be covered with a heavy duty construction plastic to reduce humid. I used this method for my guest house.

Very informative

Excellent 👌

Your explanation specialy on footing design just like a good mason but not an enginerr.

Thank you so very very much

For footing 45mm clear cover is low i think it is better to make it75mm. because the footing is underground and always under soil pressure & moisture content

@mahadevan1903

Жыл бұрын

Moderate 50mm . Severe extreme conditions morethan 50mm

@mahadevan1903

Жыл бұрын

Not soil pressure , it's based on environmental conditions mild moderate severe extreme

der kha rora der kha

Keep it up

I advise all of you to get professional civil engineers on your projects, so many factors come into play in footing design, there are NO standard footing details everything depends on that particular project, it can end up being catastrophic In the long run if you design footings yourself without engineering knowledge.

Thank you

Thanks for the tutorial. So, which standards do you use? Eurocode or ?

good information

sir do videos on desine column & beams also

The information should come with give also the formula so that civil enginering could clear undertand. 🙏

Thank you. My footing is 30cm depth and width for my brick house. I live on a rock mountain top. Am I able to so another storey of brick for a 2nd floor? Please assist thank you.

I start to build my house in the philippines i want to elevate from the road elevation may be 60cm my question is i need to put beam or not if need to put beam what is the hight of the beam from the footing thank you

Thanks for the information sir, my I request the design slab reinforcement for residential, 2 to 6 floor

Thanks sami

Thank you sir

👍👍🔥

Great

In my brick house instead of putting concrete columns I put steel posts inside the brick house. Can it still act as a concrete column?

How do you calculate structural loads to a building, what formula is used to calculate structural loads of bldg?

O If I want to use 6 inches block for a storey building, can I use column and plinth beam of 6inches width by 9inches depth

Dear sir make video about beam and slab design also. Thank you so much

@rameshramesh-fg8rr

4 жыл бұрын

Explain beams and slabs

I'm from Bangladesh

Thanks sir for the information. How about the design of the beam, can you give also the design for it? Thank yot.

Great videos ! In Belize, for a 12 by 12 inches columns, they all place 3/8`` ties. Should it be a problem? Same space between ties? The 150 mm space between ties at the top and bottom, is this about the top 1/3 of the column and bottom 1/3 of the column?

Super

İf i had overlap in the middle is there the same thing to tie!!!??just i need closly at the bottom and top?? Thank u

Good but we need design computation for rebars to prove if it's safe for building permit that's the important

Audio is perfect

thanks

What is the length of the bend of bar upside in the single mesh ? Like you mentioned @10:35

What if inclined surface like two footings on high side and two footings on the lower side like on hill what is required design? I'm not civil engineer

i have a question, is mesh footing necessary for all columns

Can we use 9" X 12" column with dia 12mm rods-8no.s for G+1 residential building?

@rupakartlife8240

4 жыл бұрын

Sure...4ft×4ft base

Poli

Sir is it okay to use 9"X12" column for two storey house

My question to you is what if we use spot welding for rebar instead of trying?

Sir this depth include blinding concrete or not?

All the structures following indian standard codes or British codes ?

Sir plz help...for g+2...CE gv 300*300 with 8no.of 16mm ...is it right..plz reply

degree of cone depend on direction of rotation. so hook cone is 45 degree as per drawing.

Mr. Sami, is your explanation for engineers or for layman,l am getting doubt.

@chrysjac5195

3 жыл бұрын

For non-engineers

Thank you Sir, may I ask what's the best solution if my land always flooding?

@SaddamHusain-qo8cl

3 жыл бұрын

the footings or foundation will be different in flooded area, you will be using pile foundation system.

@peterlim559

3 жыл бұрын

@@SaddamHusain-qo8cl ok thanks Sir.

Ran Ram bhai

how can I make columns between 18 feet gap for three storey building ?

we need a design computation to know if the rein bars size are right...not assuming bars only

Please make a vedio for basment details

Is this applicable to commercial office buildings please??

helo sir can u make a video for this kind of topic but for single storey house only thanks sir

👍👍👌👌

Up to how many floors we can use these size of footing sir

hello master I need your comment for my g+1 ho 8mx8m size. For all colum and beam 4-12mm bare 2-10mm bar NB-Centeral columns 4 12mm and 4 10mm steel dia 6mm in 15cm space M20 grd cemen Column size 27cm x 27cm Beam 22cm x 34cm depth Bean to beam spacing 4m Footin 1mx1m. By 12mm steal The depth is 1.4m soil bearing capacit v. Good I finished the slab can continue the next staps?