Why so many negative comments, this guy Did a good job showing us where the screws come out, which panels to pull off and he did it alone with 1 hand. If he showed it all set up complete and working it would be a bit better, but i give 4 of 5 stars! Nice video. I have done similar installations and audio sub installations, something like this is super simple. Cant believe the comment from the guy who said he is scared to do it and will ruin his car, pay some mechanic couple hundred bucks. Lol ....great video.

@jaypogi5147

6 жыл бұрын

Jason Sonic to get

Thank you my friend

This helped me out a LOT! Thanks a bunch

Thanks man! This video did it for me it’s the best video I’ve found on KZread

@repairvehicle

2 жыл бұрын

What do you have?

@jonathansanchez10

2 жыл бұрын

@@repairvehicle 2010 Toyota Camry I installed a cheap set of fog lights from eBay for around $35 I upgraded the light bulbs though the light bulbs were priced higher than the set of fog lights but worth every penny

@repairvehicle

2 жыл бұрын

Yes bulbs can cost more than fog lights. I have other maintenance videos for camry, don't forget to subscribe

@jonathansanchez10

2 жыл бұрын

@@repairvehicle absolutely bro! I’m now a subscriber

THANK YOU SOOOO MUCH!!! I got a kit off Ebay and was DYING trying to find what all the wires went to. NO INSTRUCTIONS!!! You have the exact same kit/setup. They are all from China and the brand does matter...just slapped a name on top of the kit. Sorry to tell you.

@CreightonDevers

4 жыл бұрын

Same here...still searching for where “acc” labelled wire connects to, but the rest was set up following this.

@repairvehicle

4 жыл бұрын

Acc connect to ignition wire. I did not want to strip wire and later have issues with starting

nice thanks

the brown connector that makes the relay is activated and nas garments lights, I can say where I connect

good

Where to buy this, what web site and how much?

Thank you ..........

At the point where wire goes through fire wall.

Does installing these fog lamps along with this wiring harness glows the fog lamp indicator on the instrument panel ??

@repairvehicle

6 жыл бұрын

+Yash Chauhan, yes it does. Because it's connected to the battery and not to the ignition. Light on the switch will not drain the battery, even if you don't drive for week.

@yashchauhan6206

6 жыл бұрын

repairvehicle i am not talking about the light on the switch , i am talking about the light on the instrument cluster which glows when the fog light switches on. The light for the indication of fog lamp is generally provided in those cars which comes the the fog laMps pre installed. So please tell me about the light which is there in the instrument panel which glows when fog lamp is switched ON.

@repairvehicle

6 жыл бұрын

+Yash Chauhan , my toyota Camry did not have indication light on dashboard from factory.

@HellcatCustoms

6 жыл бұрын

The switch itself lights up when they're on. There's nothing above the speedometer that indicates they're on, like the regular headlights.

clear as mud chico

@repairvehicle

6 жыл бұрын

What is not clear?

I bought an aftermarket fog light for my 2013 toyota camry. On the wiring kit it has 1 thin red wire with an inline fuse and then there's another wire which is much thicker and it's a white wire with the relay on it. My question is where do I connect both those two wires on the car? I have everything put in except for the power source and those 2 wires are throwing me off as to which of those two wire connects to on my car and where. Any help would be very much appreciated.

@repairvehicle

6 жыл бұрын

+Mr Vang , wire with the fuse should be thick. Wire with the fuse should be connected to the battery. Where did you get your lights from?

@theodorevaj8647

6 жыл бұрын

I got my kit from amazon. The seller name is zmautoparts, In my case the wire with just the inline fuse seems to be connect along with another wire that was much thicker and has a relay but it also has another thick same wire going out of the relay. That's what is confusing me because I'm not sure where that 3rd wire coming out from the relay is suppose to connect to.

@repairvehicle

6 жыл бұрын

+Mr Vang , here is the basic wiring instructions that might help you www.google.com/search?client=ms-android-verizon&ei=30ZjWtKqFcW0sQXwka74DA&q=fog+light+wiring+diagram+with+relay&oq=fog+light+wiring+diagram&gs_l=mobile-gws-serp.1.2.35i39k1j0i67k1j0i20i264k1j0j0i22i30k1.4848.5767.0.7223.8.8.0.0.0.0.259.1166.0j6j1.7.0....0...1.1j4.64.mobile-gws-serp..4.4.690...0i227i67k1.141.phGeqw7H2lM

Size of the screws to mount the fog lights?

@repairvehicle

3 жыл бұрын

I don't know

Yeah baby

will they auto shut off when high beam are turned on?

@repairvehicle

2 жыл бұрын

No

Mazda3 2009 installtion video or tips to install?

@repairvehicle

7 жыл бұрын

1. don't drill any holes in firewall, to prevent any water entering cabin. 2. follow same steps I have in my video you will be in good shape. 3. make sure wires do not touch any engine parts that are hot when is engine running.

Hey, I hope you answer this, do you need the fog lamp switch?

@repairvehicle

6 жыл бұрын

If you don't have switch. How are you going to turn on fog lights?

@kevinj1401

6 жыл бұрын

repairvehicle because as I heard, can you bypass the low beams to come on with the fog lights?

My wire for switch is to short reach inside car. What wires can I use to extend the 4wire harnesse to connect to my switch?

@repairvehicle

4 жыл бұрын

Any wires with same size.

@kermitalexander6655

4 жыл бұрын

@@repairvehicle thanks 👍

is it possible to install fog lamps on a 2018 prius 4? (not touring) i really want them.

@repairvehicle

6 жыл бұрын

If someone makes them, then it's possible to install.

@iLikeTigerz101

6 жыл бұрын

repairvehicle yes. I’ve seen pictures of the fog lamps that are not installed to the car.

What is the site that you went on in bottles fog lights I just bought fog lights and I need the harness only

@repairvehicle

6 жыл бұрын

+Christian Amaya , what do you mean bottles?

@9c6a

6 жыл бұрын

repairvehicle Miss key punch my phone was auto correcting me

@repairvehicle

6 жыл бұрын

My wiring came with fog lights. Company that made my fog lights no longer makes them. However, you can use this wiring kit to wire your fog lights. amzn.to/2xPeA2c or amzn.to/2x72Bh6

You should put the model and year in the video title.

ياليت تنزل مقاطعك فيها شرح عربي

@-abdulaziz_287

4 жыл бұрын

هههههههههه

I did exactly the same as you say! But my switch light or the foglight icon is always on even my car is in off position! Idk whats wrong with it!

@repairvehicle

5 жыл бұрын

Nothing wrong with icon being on.

@NeXusDz

5 жыл бұрын

@@repairvehicle Same issue, would that draw alot of power from battery to the point it will drain it over a couple of daya of not using the car?

@repairvehicle

5 жыл бұрын

Please watch this video again, I have explained why.

Si el vídeo estubiera traducido al español, sería perfecto!

@repairvehicle

6 жыл бұрын

+Teodolinda Carlota Soto Villena , I don't speak Spanish. Please translate to English.

@teodolindacarlotasotoville5319

6 жыл бұрын

repairvehicle sorry! i not speek inglish

@repairvehicle

6 жыл бұрын

+Teodolinda Carlota Soto Villena , what is your question?

@repairvehicle

6 жыл бұрын

+Teodolinda Carlota Soto Villena , use Google to translate

Can someone please tell me where can I buy the bolt (screws) for the fog light? I have nothing to hold it in place and do not know what type/size it is. Thanks in advance!

@repairvehicle

6 жыл бұрын

+Leng Taing , what is the year and make of your car?

@lengtaing9667

6 жыл бұрын

camry 2011 LE 4 cylinders. thanks!

@repairvehicle

6 жыл бұрын

Sorry for my late reply. #8 or #9 sheet metal screws would work for your installation. Length of the screws could be 3/8-3/4 inches. It depends on the thickness of the tabs on the fog lights housing. Maybe just half inch length.

@repairvehicle

6 жыл бұрын

Sorry for my late reply. #8 or #9 sheet metal screws would work for your installation. Length of the screws could be 3/8-3/4 inches. It depends on the thickness of the tabs on the fog lights housing. Maybe just half inch length.

@jazzikao4193

3 жыл бұрын

@@lengtaing9667 I know this comment and video is a while back but I just recently did it with a friend and we just used some heavy duty zip ties.

where does that brown connector go? Could you please show that? thanks a lot!!!

@repairvehicle

9 жыл бұрын

What connector are you talking about? Please be more specific.

@wawa168

9 жыл бұрын

thanks 4 reply. i'm talking about that brown connector from that fog light wire harness. I know that brown connector needs to be tapped to 12V source inside the car (beneath steering wheel), I wonder where you tap that brown connector? thanks ahead!

@repairvehicle

9 жыл бұрын

wawa168 Brown connector is cut off and new wire connector is crimped to the wire and connected to the battery. I will make a video of details.

@wawa168

9 жыл бұрын

repairvehicle Thank you for the reply! Appreciate sharing the info! I was trying to tap this connector wire to ignition instead of 12v source. That's because the fog light may be still on when the wire is tapped to a power source (if I fogot to turn it off), on the other hand, the fog light will be off when it is tapped to the ignition (the car is turned off). I just don't know where that fuse or wire is. I can't seem to find a service manual on this year model. I will look forward to your video! Thanks again!

@aspireeripsa

8 жыл бұрын

Or it can plug in to the fuse Box in side the car

Hi. Is is directly connected or it has a fuse?

@repairvehicle

9 ай бұрын

Video has details

I have a question .. is t here green light on the switch supposed stay on even tho the car is off or even when I have the switch off?

@repairvehicle

11 ай бұрын

Did you watch video without skipping

@kitomcfarlane

11 ай бұрын

@@repairvehicle I did

@kitomcfarlane

11 ай бұрын

@@repairvehicle did I miss something?

@repairvehicle

11 ай бұрын

Answer is yes

@repairvehicle

11 ай бұрын

toyota camry fog lights installation part 2 kzread.info/dash/bejne/Y2aOtq6OZcjfoqw.html

hello. my car is Toyota Verso T2 1.6 petrol (year 2011). doesn't come with fog light (only black plastic cover). And I'm interested to buy "fog light kit with everything swtich, wires harness (full kits)! So I'm not sure which one suitable? could you please assist me. many thanks

@repairvehicle

7 жыл бұрын

e Nader, I will get you more details some time today.

@repairvehicle

7 жыл бұрын

This is what I found for 2011 Verso, please double check making sure it is the same car that you have. rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337992468&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F2010-2016-Toyota-Verso-R20-Xenon-Fog-Lamps-Driving-Lights-foglights-Kit-%2F222149007029%3Fhash%3Ditem33b91cd6b5%3Ag%3Avj0AAOSw-vlVhb2m%26vxp%3Dmtr

@repairvehicle

7 жыл бұрын

This is what I found for Verso, please double check making sure that it will work with your car. rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5337992468&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F2010-2016-Toyota-Verso-R20-Xenon-Fog-Lamps-Driving-Lights-foglights-Kit-%2F222149007029%3Fhash%3Ditem33b91cd6b5%3Ag%3Avj0AAOSw-vlVhb2m%26vxp%3Dmtr

@repairvehicle

7 жыл бұрын

Don't forget to subscribe to my channel.

what i need to do with the brown conector? where i have to plug it?

@tomc8829

2 жыл бұрын

To power

Did u have to put a fuse in the fuse box?

@repairvehicle

2 жыл бұрын

No

@Ye-yz7cx

2 жыл бұрын

@@repairvehicle thanks bro good video btw now I got some idea

uno en español por favor

I wired my new fog light set up. My button that turns on my fog lights, lights up, but all I hear is a clicking sound from the relay and fog lights don’t turn on.

@repairvehicle

Жыл бұрын

Did you check voltage if it’s going to the fog lights?

@surslaughter3524

Жыл бұрын

@@repairvehicle I will do that today. So the clicking sound from the relay… could that just be that the voltage is too low? They sent a 15amp fuse on the wire between the battery connector and the relay.. I see most kits come with 30amp fuses.

Where should be used Silicone?

@repairvehicle

9 жыл бұрын

***** Where wire goes through fire wall.

My switch icon light stays on even with the car turned off, I tapped straight to the battery tp get power, will this drain my battery? like if i dont use my car for a couple of days, will it drain it?

@repairvehicle

5 жыл бұрын

No.

@DJames2001

4 жыл бұрын

NeXusDz I have the same problem did you ever get it figured out?

@joeholland428

4 жыл бұрын

Dylan Hogan you have to tie the wire that powers the light in the switch and tap it to the dash lights or another wire that is switched with the ignition. It is a different circuit than the lights so it is low current draw.

Oooo

What connector are you talking about? Please be more specific.????

Can you put yellow lights on this foglights

@repairvehicle

2 жыл бұрын

Yellow light bulbs?

@danielbecerra3773

2 жыл бұрын

@@repairvehicle yes

@repairvehicle

2 жыл бұрын

@@danielbecerra3773 yes you can

@danielbecerra3773

2 жыл бұрын

@@repairvehicle can you send me some that will fit? So I could order them

@repairvehicle

2 жыл бұрын

@@danielbecerra3773 , what size bulb do you have now?

Just bought a 2011 Camry LE and was thinking about installing a set of ebay fog lamps, until I saw this video and the rats nest of wires they come with lol

@malachiinternationalsound2629

5 жыл бұрын

Same i was thiking too much scatter wires

I did not learn any

И на фига этот геморрой нужен?

This video has additional details kzread.info/dash/bejne/nWeIk7WRkdXbZ7g.html If I helped you, please support my channel via www.buymeacoffee.com/Repairvehicle Look at this 350k miles Ford. Since when Ford became reliable www.amsoil.com/newsstand/testimonials/articles/pristine-ford-flex-tops-350-000-miles/?zo=5257753 Every car, truck and EV needs this kzread.info/dash/bejne/epOWtaaqnrbOaZM.html Maintenance mistake made by diesel owners kzread.info/dash/bejne/iXaDpNx6ZZnQpto.html Why trucks don't come with this? kzread.info/dash/bejne/mnaW3Kymc6vac9I.html How to improve lights without cutting or drilling kzread.info/dash/bejne/fWiLxK9yZ9PRnag.html How to protect paint on the vehicle without wax kzread.info/dash/bejne/e2Wa15uNo8y_csY.html Fog lights kit amzn.to/2eEvMU4 Synthetic oil filter www.amsoil.com/shop/by-product/filters-and-by-pass-systems/oil/&zo=5257753 Bypass oil filter www.amsoil.com/shop/by-product/filters-and-by-pass-systems/by-pass/&zo=5257753 Fram oil filter amzn.to/2z453pR Purolator oil filter amzn.to/2y59QJb ACDelco oil filter amzn.to/2yv2C2C Ford motorcraft oil filter amzn.to/2fXE1f6 Toyota oil filter amzn.to/2y1chep Honda oil filter amzn.to/2y5NhUR Dodge Oil filter amzn.to/2xnC3Yk Nissan oil filter amzn.to/2z2N2bn Subaru oil filter amzn.to/2ghxXLA Mazda oil filter amzn.to/2z46rc3 Mobil 1 oil filter amzn.to/2ksgm8g BMW oil filter amzn.to/2y4Ar9c Mercedes Benz oil filter amzn.to/2fWby9s

Why not just pay someone to do it for you

@repairvehicle

6 жыл бұрын

No one will do it better than I am. Also, then why buy car without fog lights, if you going to pay someone to install.

wasn't helpfull

Useless

It looks like a shit load of work to do and you might screw up your car electronics. I would rather pay my mechanic a couple of hundred dollars to install it himself professionally, that way my car will be guaranteed to work with the fog lights.

@bigmacdaddy1234

9 жыл бұрын

mechanics screw things up too you know.

@hailherrosner

9 жыл бұрын

***** Your right, I installed it myself, but got a car electronics expert to do the wiring for $80, because I was scared to screw up my cars electronics, now it works perfectly on my 2011 Camry V6. I also installed leather seats from Katzkin, found on Amazon. Toyota dealers use Katzkin leather on their cars. Then I covered the Katzkin Leather seats with Synthetic Leather Seat covers to protect them, made by FH Group, also found on Amazon for only $59.99, take care, and thanks for the video.

@hopeyoustumbleuponthis.8627

3 жыл бұрын

@@hailherrosner That's nuts, if you were just going to install covers,why would you put leather on first ?