Focus Steeda Chassis Jacking Rails Ultra Lite Low-Profile Pair 2012-2018 Installation
Автокөліктер мен көлік құралдары
Bill shows you how to install a Pair of Steeda Ultra Lite Low-Profile Chassis Jacking Rails on your 2012-2018 Focuses, 2013-2018 Focus ST or 2016-2018 Focus RS.
Purchase Product Here:
www.cjponyparts.com/steeda-ch...
Don't allow unsightly wear and tear become an ongoing theme for your prized Focus. When you own a 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Focuses, 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST or 2016, 2017 or 2018 Focus RS, you'll quickly realize that there are many sensational upgrades available for it. Boosting the performance and aesthetics of your Focus ST or RS is an incredibly rewarding experience, so you shouldn't be worrying about having to jack it up. When lifting your Focus, make sure you have this tough pair of Steeda chassis jacking rails. These rails are barely going to be noticed, but they'll be a huge lifesaver for the exterior aesthetics of your Focus. Fitting the LH and RH side, this durable pair comes with all the required hardware, making your installation quick and easy.
Check out more Focus ST Body & Appearance parts from CJ's here:
www.cjponyparts.com/focus-st-...
Check out more Steeda parts from CJ's here:
www.cjponyparts.com/steeda/c/...
Subscribe to CJ Pony Parts on KZread here:
kzread.info_c...
Пікірлер: 23
Fit perfectly on my 2017 focus st the first one took me about 40 mins to install and the second took like 15 very nice product fits well and makes jacking the car up so much more simple
@cjponyparts
4 жыл бұрын
Great to hear!
Just installed them on my 2015 ST, Easy Installation. my oil changes will be so much easier and safer, thanks for the video..
Got my Steeda jacking rails recently thanks to you guys
I have a 2018 ST, the rear plastic panel took three t30 torx bits and I didn't have to take out one of those crossmember bolts all the way. overall very easy install
Ooh I need this for my fiesta st!
just put my 16 focus up for storage and sucked to jack it up, this will help so much
Got my rails on, thanks for the how to! 2017 Ford Focus RS. Nitrous Blue Not sure if mine is Pre or post your model but underneath I have a couple large hard fabric panels that runs along the center of the car gapping where the exhaust is. Installing around that crap is a bit of a pain and on the passenger side I ended up doing a little cutting at a point to make it fit back in with the rail.
@jmelgar4763
5 жыл бұрын
GrimGearStudios I had to trim the outer part of the panels on my 2017 RS as well, easy install besides that 👌
@SIBUK
4 жыл бұрын
Were you able to do this on your driveway and if so how did you raise the car up to gain access?
Thanks
Do you think they add any chassis stiffness?
@Zerogivengarage
7 жыл бұрын
Given how they bolt in I really don't think so
Will it fit a 2013 Focus Titanium hatchback ???
@derekboze4534
5 жыл бұрын
Yes
Will I be able to install them if I use a ramp and wheel chocks?
@cjponyparts
Жыл бұрын
Yes absolutely!
will it a good spot to put jack stands while working on the car
@Zerogivengarage
7 жыл бұрын
Depends on what you are working on but yes they can be used for jackstands as well.
Is there a provided torque spec for these bolts?
@madmyro
2 жыл бұрын
You ever find out?
@Aegis877
2 жыл бұрын
@@madmyro can’t remember… sorry! I probably didn’t find an answer
@madmyro
2 жыл бұрын
@@Aegis877 all good. I just ordered them anyways so I’m sure it’ll work out just fine