Sorry about the quality. Used the wife’s phone and have no clue what I’m doing. Links to stuff below 🤙🏻 JBL BASSPRO 12: a.co/d/7M4vc9A Wiring Kit: a.co/d/26d2XHL
Жүктеу.....
Пікірлер: 24
@luchvk Жыл бұрын
Nice install! I recently did one too. As a tip, it's good to use wire loom to protect the part of the wire in the engine bay.
@elthompsonian
Жыл бұрын
The black cable housing thing? I was wondering what that was for 👍🏻
@PhoenixWolfStudios5 ай бұрын
Correction: when you install your sound system always make sure to disconnect the positive wire from the battery to make sure that you dont start a fire when you work with electrical system, its important to note when disconnecting the negative terminal first could short out when you connect that back in Always disconnect the positive first before working with your electrical system and refrain from touchin the negative (Ground) cord from your batteries
@nicholasjohnston97376 күн бұрын
How would you wire the signal in an st3? Would you be able to run signal from the audio wiring from the stock Sub?
@gogoydollaga36076 ай бұрын
does it have to be both speakers or one works? thanks
@bitcoinare_lifestyle2 ай бұрын
where's part 2 with the demo... I wanted to hear it
@sterling98068 ай бұрын
Do you need a line output converter. I have everything wired up exactly like this video and my rear speakers don’t work and the sub doesn’t work
@elthompsonian
7 ай бұрын
Hmmm weird, did you somehow sever the wires to your door speakers? 😬 i do not have a line output converter
@williamreyes6233 ай бұрын
Messure of the box?
@DeeBee7O72 ай бұрын
Damn no preview of how it sounds?
@christianskorynin577010 ай бұрын
Do I need to Connect the audio wires with the door speakers or can I use the two round audio connections?
@elthompsonian
10 ай бұрын
I tapped the door speakers, if your head unit has line out ports then definitely use those instead. This tutorial is just for those who dont want to touch the head unit
@Blessed300.7 ай бұрын
On the speaker wire for the signal on the door panel which one is positive and which one is negative ? On the brown wires ? 🙏🏼
@elthompsonian
7 ай бұрын
Are you asking about the front door or back door?
@michaelxdykstra Жыл бұрын
yo where did you find that wire diagarm? cant find shi for my 2016 se
@elthompsonian
7 ай бұрын
Forumns 🤷♂️
@elthompsonian Жыл бұрын
UPDATE: A good ground is Crucial! Do NOT ground to that seat bolt that I mentioned, it's weak and you only get half output from the sub, sand the paint and run a little screw somewhere in that same area!
@matisa5270
Жыл бұрын
how much does the box weight bro?
@chris-samuel-cesar2 ай бұрын
So how do it turn on and off if you dont have remote wire??
@DaMusturd
18 күн бұрын
It turns on when the car turns on
@dustinboyce618211 ай бұрын
No remote wire?
@elthompsonian
10 ай бұрын
No I control it through the head unit. I just set the bass setting to max when i set the gain.
@sterling98068 ай бұрын
No remote wire?
@elthompsonian
7 ай бұрын
Nope, i use the bass adjustment in the stereo menu. I just made sure to set it to max when i adjusted my gain. (The wire for the remote had a bad connector on one end so I went w/o)
Пікірлер: 24
Nice install! I recently did one too. As a tip, it's good to use wire loom to protect the part of the wire in the engine bay.
@elthompsonian
Жыл бұрын
The black cable housing thing? I was wondering what that was for 👍🏻
Correction: when you install your sound system always make sure to disconnect the positive wire from the battery to make sure that you dont start a fire when you work with electrical system, its important to note when disconnecting the negative terminal first could short out when you connect that back in Always disconnect the positive first before working with your electrical system and refrain from touchin the negative (Ground) cord from your batteries
How would you wire the signal in an st3? Would you be able to run signal from the audio wiring from the stock Sub?
does it have to be both speakers or one works? thanks
where's part 2 with the demo... I wanted to hear it
Do you need a line output converter. I have everything wired up exactly like this video and my rear speakers don’t work and the sub doesn’t work
@elthompsonian
7 ай бұрын
Hmmm weird, did you somehow sever the wires to your door speakers? 😬 i do not have a line output converter
Messure of the box?
Damn no preview of how it sounds?
Do I need to Connect the audio wires with the door speakers or can I use the two round audio connections?
@elthompsonian
10 ай бұрын
I tapped the door speakers, if your head unit has line out ports then definitely use those instead. This tutorial is just for those who dont want to touch the head unit
On the speaker wire for the signal on the door panel which one is positive and which one is negative ? On the brown wires ? 🙏🏼
@elthompsonian
7 ай бұрын
Are you asking about the front door or back door?
yo where did you find that wire diagarm? cant find shi for my 2016 se
@elthompsonian
7 ай бұрын
Forumns 🤷♂️
UPDATE: A good ground is Crucial! Do NOT ground to that seat bolt that I mentioned, it's weak and you only get half output from the sub, sand the paint and run a little screw somewhere in that same area!
@matisa5270
Жыл бұрын
how much does the box weight bro?
So how do it turn on and off if you dont have remote wire??
@DaMusturd
18 күн бұрын
It turns on when the car turns on
No remote wire?
@elthompsonian
10 ай бұрын
No I control it through the head unit. I just set the bass setting to max when i set the gain.
No remote wire?
@elthompsonian
7 ай бұрын
Nope, i use the bass adjustment in the stereo menu. I just made sure to set it to max when i adjusted my gain. (The wire for the remote had a bad connector on one end so I went w/o)