Focus ST/Focus RS Rally Armor Mud Flap Set 2013-2018 Installation
Автокөліктер мен көлік құралдары
Bill shows you how to install a Set of Rally Armor Mud Flaps on your 2013-2018 Focus ST or 2016-2018 Focus RS.
Purchase Product Here:
www.cjponyparts.com/rally-arm...
These mud flaps possess a strong, impact resistant fabrication. A rugged urethane composition provides the added ability of maintaining a balance of exceptional flexibility and long term durability on your 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST or 2016, 2017 or 2018 Focus RS.
Set Includes and Features:
- Four Urethane Mud Flaps
- Brackets and Hardware
- Made in the USA
- Installation Instructions
- Long Lasting Protection
Available in 3 Versions:
- Black with Red Rally Armor Logo
- Black with Gray Rally Armor Logo
- Red with White Rally Armor Logo
These Rally Armor mud flaps will protect your vehicle from harsh road conditions and will maintain their shape and form, even in extreme cold or hot temperatures. These direct fit mud flaps provide excellent coverage against paint damaging road debris; all while bypassing the unnecessary, painstaking customization and drilling frequently needed for installation. These mud flaps let you utilize the supplied hardware and brackets to simply mount these without doing any permanent modification to your vehicle.
Check out more Focus ST parts from CJ's here:
www.cjponyparts.com/ford-focus...
Check out more Rally Armor parts from CJ's here:
www.cjponyparts.com/rally-armo...
Subscribe to CJ Pony Parts on KZread here:
kzread.info_c...
Пікірлер: 80
If you're installing these on an RS, the bolts in the back are 8 mm instead of T30. Also, the RS rims are much larger so you can get away with leaving the front wheels on, but you'll need to get the bottom small screw threaded almost all the way into the bracket before putting the flap assembly on the car.
Great guide thanks. One small item to note is that the RS install does not require you to remove any of the circular clips in the rear arch liner.I also found it was easier to screw the bracket in starting at the top otherwise you struggle to get the spacers in place, other than that was a breeze thanks!
I'm definitely getting these for my winter setup.
Extremely well made tutorial. Thanks!
I put these on my 2014 se hatch after a stick flung from my wheel and dinged my door. They look awesome but just so you know if you dont have the ST, a little bit of the silver will stick out below your bumper so i recommend painting them black before hand
Just finished installing these...they look awesome! Along with 20mm wheel spacers all round. Front went on like butter, the back not so much. Make sure your long screws find the back of those plastic clips,there tricky. Also I ended up using one of the factory torx screws and clip on the inside hole instead of the push in clip. The hole was too big for the plastic clip.
Are you using any wheel spacers on the car shown? If the spacers are used does the wheel/tire stick out beyond the flaps? Thanks for all of the great vids on the ST.
The fps on this video is orgasmic *__* Also wonderful explanation, thank you!
Just installed mine. Nice little design, definitely a functional product outside of its aggressive looks. To everyone that's installing them, are you aligning the flaps like it says in the manual? Or are you just aligning them to what positions looks the best to your own eye?
For everyone asking, YES it works with the SE models and S model and Titanium. The only difference I can tell is that the ST comes with a longer rear bumper, as in it extends out to the wheels further, so when the flaps are installed on an SE or the like, you can see some if the bracket below the bumper, rear diffuser area. Only on the rear, though.
Still helpful in 2022. 😁
Eh - pass :) Nice install video as always though. Loved the model lift in the tools clip.
Jess there are no spacers on our car, that is stock track width
are these the longer or the shorter flaps? wondering if they will fit on my focus with a drop.
Still helpful in 2019. 🤣
My car is on sport line lowering springs will these still work ?
hi would they fit my 2015 ford focus sport.
Is there supposed to be a gap in between the rear fender and the mudflap? Mine have a gap and don’t know if it’s normal because of the spacers or If I did something wrong lol
i have a 2015 focus st and for the rear you don't need to take the liner off as much as he did. You can install them without taking the top clip off and you'll be just fine.
@cjponyparts
4 жыл бұрын
Thanks for the heads up, we thought that might be possible but took it further apart so people could see better.
@Simplicity.13
4 жыл бұрын
@@cjponyparts Definitely great video, just wanted people to know you don't need that extra piece taken off. Then again it could also make it easier.
Can the front mud flap go inside the fender liner
what type of mods i can put on my 2018 focus se hatchback.
will they fit se model's that are non hatch backs?
you think these would fit a 2017 ford focus se sedan?
What are those wheels and red bolt on them (sorry for my english) Just bought 1 red st here in belgium
what are those rims????
To mudflap or not to mudflap, that is the question.
Mine aren't glossy anymore. :(
What springs are you going to go with? I would love your opinion on the mountune springs if that's an option for you guys.
@Zerogivengarage
10 жыл бұрын
We are going with a set of KW coilovers for our car. We do not offer the mountune springs so I really can't offer an opinion on them. I was happy with the Eibachs we installed on the 13, they rode nice and had a nice stance.
Just installed these on a 2014 Focus SE. The seller said they would fit but they do not. I'm guessing the ST bumper sets lower to the ground. the bottom of the bracket is exposed and looks terrible.
@benstich3616
4 жыл бұрын
JBart812 it says st and rs in the title not se
Just put a pair of these on my 2016 ST.. there is a bit of a gap between the rear mudflap and the actual body. Is that normal?
@Zerogivengarage
7 жыл бұрын
It should be pretty tight but a hint of gap is normal
I installed them the front hangs straight down, and the backs are super curved what happened?
@FurryWrecker911
5 жыл бұрын
I'm necro-replying here but hopefully this helps others. On the flaps you'll see the drilled holes are oblong, not circular. This is because you can camber the flaps inwards in outwards after you thread the screws in, so long as you don't snug them down immediately. I just installed mine yesterday and left about a fourth of an inch to each screw left to fasten down, and experimented with cambering the flap by grabbing the corners and slightly turning it inwards and outwards. I found where I wanted them, then snugged the screws down. All 4 hang perpendicular to the ground. There have been quite a few FoST and FiST owners I've seen with negatively cambered flaps because they didn't adjust theirs before snugging them.
so these require no cutting or permanent modifications yet require me to hack a hole through the rear wheel liners?
is this pretty much the same process for a 2017 focus st?
@LX503NW
3 жыл бұрын
Exactly the same. The rally armor flaps run from 2012-2018 Ford Focus ST
same fitment and installation for 2016 models?
@Zerogivengarage
7 жыл бұрын
Yes
hi, i have a 2014 ford focus 2.0 S hatch, can it be fitted with this ST model flaps?thanks
@lilmandash
9 жыл бұрын
Yes, they both have the same exact liner set up and same line up for all the bolts. I had the SE model and now I have an ST, transferred Rallyarmor mudflaps from the SE to my ST
@DKDuchy
9 жыл бұрын
Pat Almeida Pat do these fit on a 2014 se hatch?
Would I be able to install these on a 2011 Jetta?
@frenzygamer907
5 жыл бұрын
P MO yes
Would this fit a 2012 Ford Focus titanium?
@Zerogivengarage
9 жыл бұрын
According to Rally Armor, yes they do
how do you secure the last screw
@ezekieldavalos3967
5 жыл бұрын
Lol
Does this work on a 2010 Ford Focus?
@h2sx_riderqc
5 жыл бұрын
no
Will these fit a 2012 SEL hatch?
@17143972290
4 жыл бұрын
Vince Stinnett buy it and see for yourself lazy bones
Do these fit on non-ST Focus?
@cjponyparts
10 жыл бұрын
Yes, these will fit 2013-2014 Focus SE/Titanium Hatch models
@ShaneTheMunchist
7 жыл бұрын
so this will fit at my 2013 titanium hatchback
Will they fit 14 plate zetec s
@Zerogivengarage
10 жыл бұрын
They fit the ST, SE, and Titanium models
do these work on the 2017 st?
@alejandrogaspar8924
7 жыл бұрын
luis paredes nothing much has change besides the front so yes they will fit
does anyone know if i can use these on the SE model? i'm assuming no but its worth the ask.
@DKDuchy
9 жыл бұрын
(2014 se hatchback)
@shadesofbluee
9 жыл бұрын
"2013+ Ford Focus ST, SE/Titanium Hatch models." That'd be a yes. Just picked up a 14 SE hatch and already planning on ordering a set, and Weathertech floorliners. Gotta keep that paint chip free and the carpet spotless.
@DKDuchy
9 жыл бұрын
Da Blueguy i gave up on the price and just got the one's from ford. they are half as cool and half as expensive so i dont mind. the 14 se is a solid car! just got it a month ago. ST would have been fun, if i had the money...
@shadesofbluee
9 жыл бұрын
My WRX was a lot more fun, but I'm gonna enjoy filling this up a lot less. So I wouldn't dwell on it too much, as this supposed 'cheap gas' won't last after election season.
@DKDuchy
9 жыл бұрын
Da Blueguy 30 mpg on my first tank of gas, im pretty happy! But yes, a wrx would be way more fun. Yeah... stock up now!
That much money an they can't even powder coat the metal.
So would these fit on an SE as well??
@NocoPBMLS2
5 жыл бұрын
Yes all hatchback models 2013 up
@h2sx_riderqc
5 жыл бұрын
yes all mk3-mk3.5 (2013-2018)
What wheels are those?
@cjponyparts
10 жыл бұрын
Those are the Niche Targa 18x8 that we sell here at CJ Pony Parts. www.cjponyparts.com/niche-targa-wheel-18inx8in-40-offset-matte-black-with-tinted-face-accents-focus-st-2013-2014/p/W635-V/
what wheels are those?
@bws4lifeeazy
7 жыл бұрын
Andrew xxr
thanks for nothing great video
its not all wheel drive...
@codyreekie
6 жыл бұрын
Alpha Wolf and?
@johnjesusiskingofkings1770
4 жыл бұрын
@@codyreekie LoL right... The rear wheels will still pick up debris and fling them into the paint... Even though AWD will obviously cause even more debris