Focus RS Injen Cold Air Intake Kit 2016-2018 Installation
Автокөліктер мен көлік құралдары
Bill shows you how to install an Injen Cold Air Intake Kit on your 2016-2018 Focus RS.
Purchase Product Here:
www.cjponyparts.com/injen-col...
Dyno tested, this Injen intake makes max gains of a whopping 17 horsepower and 20 ft-lb of torque. The 3" premium aluminum pipe routes all the way to the turbo and includes all of the required parts for an ideal fit. With a similar shape to the stock airbox, the included heat shield is open on the sides and top for increased exposure to air while also sealing the top of the shield against the hood, helping to shield from engine heat.
Delivering a commanding intake tone under acceleration, this killer kit is a great way to add some aggressive personality to your 2016, 2017, or 2018 Focus RS.
Installation is a simple and straightforward process, getting you back on the road in no time.
Available in a Polished, Wrinkle Black, Wrinkle Red, or Wrinkle Hyper Blue Intake Pipe.
Check out more Focus RS Engine parts from CJ's here:
www.cjponyparts.com/focus-rs-e...
Check out more Injen parts from CJ's here:
www.cjponyparts.com/injen-tech...
Subscribe to CJ Pony Parts on KZread here:
kzread.info_c...
Пікірлер: 14
Wow that's a really good looking setup, always love having color choices for an intake tube.
When is your next video? :D Keep it up!
Is the installation pretty much the same for an Injen CAI on a 2014 focus st?
In the description you have "The 3" premium aluminum pipe routes all the way to the turbo" it does not go all the way to the turbo. It goes halfway. That Black tube you connected the intake tube to goes to the turbo, but I am sure this is just a copy error as you have done so many of these video it might be at a copy paste pace sometimes.
How does it get the cold air because the intake gate which the OEM is fitted on is on the left side of the heat shield, so how will the cold air reach the filter when the cold air is being blocked due the heat shield also? Maybe i am wrong, just looking for an answer :)
@TomTom-xh6cn
4 жыл бұрын
I thought the same...
Y do u need 2 drill the 1 ground y not just swap out the bolts & just leave it there
@Tactical_Turtle
6 жыл бұрын
Bolt hole diameter is larger thus the bolt is larger. Kinda simple point A-B...
I highly doubt this gives you 17hp 20 tq
@Big1_
7 жыл бұрын
You are wrong. it gives you 2 hp and -5 torque because the extra more air with the same amount of fuel. This air kit needs a repro.
@h2sx_riderqc
6 жыл бұрын
you dont need a repro with injection car ...
@bobsmith-qz2pv
2 жыл бұрын
@@Big1_ your ignorance speaks volumes 🤣🤣
Def gives no performance gains without a tune. The factory tune limits you to the stock boost/fueling/timing parameters. It will give you some better sound though. Def do this with a tune like Cobb Access-port to gain maximum performance out of this filter
Wow, cold air intake on a cold air intake. Lol