Focus Mk2 Bonnet Lock Won't Open - Hood Release Problem (Full Guide)
Автокөліктер мен көлік құралдары
NO GRILL DAMAGE
PLEASE THUMBS UP To Help Others Find This Video
SUGGEST YOU WATCH At Least 7mins As it may save you time. You only need to chop the two end screws. Check the comments too.
A common problem with Ford Focus Mark 2 is the security mechanism of the bonnet latch breaks easily. See parts below.
The good news is, it is fairly easy to fix.
Amazon Spares:
Bonnet Lock Repair Kit: ebay.us/TZgCjq
Screws Cut with the Chisel: amzn.to/3HfyusK
If you need to rebuild the lock cylinder watch this video:
• Ford Bonnet Lock Barre...
More Ford Focus Repair Videos:
• Fixing Focus Mk2 How T...
Пікірлер: 447
Thanks, just did it to my '08 focus mk2.5! Popped the 2 side clips by turning a flat screwdriver and with some effort got the grille out (pop the hood open a bit by pushing a rubber handle between hood and headlights). The front cylinderlock and cable replacement is actually the easy part. Heads up tho for people with the 2.5, if you see a plastic v shaped cold air intake duct behind your grille try to undo the 2 bolts that hold it in. In my case i snapped them out causing in some damage to the plastic, couple zip ties to the rescue shhht haha. Opens and closes fine now, spent euro 29,99 and prob 45 minutes wasn't in a hurry.
@MotoringEvents
Ай бұрын
Great tips, pinned the post 👍
Now I know why my 2010 Focus engine is so clean. I'm the first person to get the bonnet up. Many thanks.
@MotoringEvents
9 ай бұрын
Lol, glad you got it open!
I'm a 50 (very odd) year old non mechanic female and using this video I was able to get into and replace my faulty lock. In doing so I saved over £300 (as quoted by the Ford dealer in Frinton on Sea) good publicity for them cheeky little chappies. So a big THANK YOU to MotoringEvents for taking the time to record and up load this video to KZread, the gentleman saved me a whole weeks wage by showing me how to do it myself. Thank you x
@MotoringEvents
7 жыл бұрын
Thank for you for your great comments, it's cool saving a load of money fixing things yourself isn't it. BTW 50 isn't old at all, I'm 50 in a couple of months :-)
@Dave-in-France
6 жыл бұрын
50 isn't old, especially for a lady !! - I'm a 65 bloke just about to do this repair on a mate's car thanks to this brilliant video.
@sniperwolf6807
6 жыл бұрын
I asked the other day in Clacton on sea and was told it's 450 to 470 😂
This lock is definitely a design fault. Thank you for your time and patience with the solution.
@MotoringEvents
7 ай бұрын
Thanks for watching, it was a bizarre problem to solve as an amateur. Glad it helped.
Helpful vid! The hardest part for me was getting the grill off. Managed to do it without causing too much damage. I wouldn't have thought about just smashing off the old unit with a hammer, but I was finally able to get the bonnet open after following what you did.. only I used long nose pliers to twist the remaining part of the mechanism. Was such a relief to finally see the bonnet pop up! All in all it cost me £13 to do the job with a replacement kit from ebay. Once the bonnet is open the replacing part is a piece of cake. Just a little tip for anyone using the same replacement kit I used, when you slide the key barrel back into the plastic sleeve of the grill, put a tie wrap around the the plastic clips and pull it tight so it grips the barrel better. I had a little issue where the new barrel was slightly turning in the plastic sleeve when I turned the key left, which meant the bonnet wouldn't pop. The tie wrap sorted that out though. If I can do this repair with extremely limited mechanical experience, anyone can! Thanks again!
@FunkyMunkeyGaming
2 жыл бұрын
I used this tip also with the cable tie as I found it moving around quite alot. thanks for that
Who made this bonnet design ? Raise your hand ! HATE IT !
@a.nayyarchaudhry2797
5 жыл бұрын
NOT WISE IDEA HATE FORD
@Libyaforlibyan17feb
4 жыл бұрын
Bjarke Jensen why don’t they use a metal instead of plastic !!! Duahhhh
@johnharris6691
4 жыл бұрын
If I had a. Gun am telling ya !!!!!!!!
@MrFrampo56
4 жыл бұрын
I FUCKING FUCKING FUCKING HATE HATE HATE HATE THIS FUCKING WORST DESIGN SINCE THE BEGINNING OF TIME. FUCKING FORD MORONS. WTF? Nobody but nobody can ever explain the thinking behind this. Unless it’s to drive us owners FUCKING INSANE. I WILL NEVER NEVER NEVER BUY FORD AGAIN. OR HAVE ONE OF THESE GIVEN. THEY CAN ALL FUCK OFF AND DIE !!!!!!!!
@Jonathan-L
4 жыл бұрын
Whoever designed this crap, should have his pen & paper confiscated, give him a bucket & mop then give him a proper job.
To the genius engineer who decided to design this kind of bonnet lock instead of the traditional one... A big bucket of human crap down his mouth! Got rid of mine just need to install a new one.
@danielwalker5682
6 жыл бұрын
Alex P. Can't call someone like that an "engineer".
@richardwinstanley8219
5 жыл бұрын
@@danielwalker5682 It was probably the same 'engineer' who designed the new power steering system for the Fiesta, Focus and Mondeo around 2004.
@shanepatrick641
3 жыл бұрын
@@richardwinstanley8219 Where there any major flaws with the power steering at that time?
@richardwinstanley8219
3 жыл бұрын
@@shanepatrick641 Yes there was. The Focus, Fiesta and Mondeo of similar age all have a problem with the union nut on the high pressure pipe for the power steering. Its a common failure point, will start leaking eventually, and the whole pipe assembly will need to be replaced.
Thanks for this. I found it difficult getting the bonnet open at 9:36 with a screwdriver - I solved it by putting 3 small drill bits in a drill to do the anti-clockwise turn. Drilling out the bits at 13:36 took me somewhat longer than you as well. Fantastic video and well needed given all the comments in such a short period of time. Call me old fashioned, but I still prefer the old bonnet leaver under the drivers side or passenger side door available on almost every other car in the world.
@MotoringEvents
7 жыл бұрын
Alex Ayscough Thanks for your comments. Great idea using the drill bits. I struggled a bit with that too.
Thank you for this video. I haven't managed to replace the mechanism yet (ordering it now), but I managed to get the bonnet open with minimal damage to the paintwork. I can confirm that he's right about the 2 plastic screws to get the grill off, no need to release all of the intermediate screws. Thanks again! Very helpful.
You are an absolute legend mate! This video saved me labour costs at a garage! Thank you so much!
@MotoringEvents
6 жыл бұрын
Cheers, glad you saved some money :-)
Nice one uploading this. It worked! I was a bit cautious at first taking a hammer to the car but all the bits that break off are plastic and are replaced by the new part. Got a replacement for 20 quid off eBay, came with a key so no lock bothering either. Saved me a packet!
You just saved me 😂, all week its been fine, and this morning, just not happening. Saw your vid, copied it for my 07 Ford Focus. And done. Thanks again.
@MotoringEvents
5 жыл бұрын
Brilliant, glad the video helped.
Perfect! I repaired mine thanks to this comprehensive video. Thanks 👍
Thanks for this video, this happened to mine a few days ago, just got round to replacing it this morning, nice quick and easy after following your video, my only difference was I only knocked out the 2 end plugs and pulled the grill out whole, as you found out after wards you could do. Thanks once again!
Typical car makers creating a problem where none existed and fitting a system guaranteed to fail !
Thanks for the excellent video, it saved me a lot of money and not taking the car to service center. I have viewed the other video on KZread to fix the lock to use the same key. Highly appreciate your efforts in sharing this video. Thank you.
Video was spot on, my sons focus bonnet refused to open, followed your tutorial and 43 minutes later all sorted. Just £28 for a new release mechanism on eBay job done. Thanks for taking the time to post the tutorial 👍
@MotoringEvents
7 жыл бұрын
Cheers Stephen
Thanks very much for this - it gave me a great start - and an idea that saved a lot of trouble. I removed the grill and and pushed out the lock casing. Then I pushed and drilled out the securing pins to release the lock barrel. This allowed me to get hold of the end of the inner cable with a small pair of locking grips. After a fair bit of waggling and pushing in various combinations I got lucky and the bonnet popped. (I'm sure it won't work every time, but it's worth a try.) On dismantling the mechanism it appears that the small cross-section piece of plastic is the culprit.
Followed your video and just done the two end clips, worked a treat thanx
I LEFT THE GRILL IN!!! MK2.5 MODEL Thank you!! Your video gave me the confidence to do it. I have a mk2.5 (a little different). I have horizontal slats unlike your criss-cross. Screws on edge are not visible. I sliced through 3 slats, able to get hand in and unclip lock. BIG BONUS though.... once rubber bung pulled away... I smashed the end a few times with long screw driver and hammer to crack it open, then thought I would try key... it worked!!! Still replaced the whole thing except I used old key barrel. Will glue slats back up. Thanks again for the detail. As many have said.... you are a legend!!
Thanks for your video it saved me having to take it to a garage, what I did different was after you pulled the white cross shaped piece out of the lock I fitted the lock without the key and cable repair kit and now use a long screwdriver through the top hole in the grill above the keyhole to turn the latch no more problems and save £50 on repair kit. I you want you can fit the old lock back in the grill as a dummy, hope this helps.
@ladcjd1
6 жыл бұрын
PS if you push up from under the bumper on the rear cover which came out on the video by mistake by the two tabs at the back as shown on the video it will save you breaking the tabs which I broke one when using force to pull the grill out. This will make pulling the grill out very easy
@MotoringEvents
6 жыл бұрын
Cheers Wayne, good to know.
@humbertodominguez7518
6 жыл бұрын
Bajo la falda
@jochenstacker7448
5 жыл бұрын
Did the same, removed mechanism and now using a long screwdriver.
Thank you so much . It helped me repair my car myself .
your a bloody legend !!!! my Focus ST had the same problem. .i did as you showed and within about 30 min it was removed and the bonnet was up (after 10 months of it being locked) .i did it slightly different to get those plastic screw locks off, i took the bottom stone guard off for easier access. being from Australia it's hard to get advice other than smash in the grille. . Lucky your movie shows the most domestic way!
This video is as clear as it is accurate. Got my bonnet open within 20 minutes and switched the locks within 10. Good as new and saved myself £100+ Thank you!
Great video, really helped as the frustration levels rose. The grill on my RS was different and I had to go in through the lock and take off part of the bumper to get hand access. But only for this video on how to approach the problem I'd still be out in the driveway. Thanks again.
@MotoringEvents
3 жыл бұрын
Great to hear!
Thanks for the useful information on how to do this. I'm now going out to the fields to torch my focus 😂
@MotoringEvents
3 жыл бұрын
haha, its not that bad :-)
Thanks for the help.Released the grill at the bottom,sheared the two plastic screws nearest the lights,got my hand in and the whole plastic unit came out.This allowed me to reach the latch with my fingers thus opening the bonnet. From there I broke the plastic surround and re assembled the lock mech.Working a treat.Cost £0.Dudeism;-)
@MotoringEvents
6 жыл бұрын
Brilliant, love a £0 cost.
Very well explained and just need to follow step by step, have fixed mine today. Big Thanks to you.
@MotoringEvents
5 жыл бұрын
Cheers, glad you fixed it :-)
Great video mate sorted my bonnet lock out cost me 20 quid instead of trip to garage cheers pal
Thank you! Just got my bonnet open thanks to your advice!
@MotoringEvents
5 жыл бұрын
Ian Slesser glad you got it sorted.
Brilliant video. I used this to recover my car and managed to get the bonnet open in ten minutes. Minimal damage too. Cheers!
@MotoringEvents
7 жыл бұрын
Thanks for the feedback. Really glad it helped.
@christianreynot9780
6 жыл бұрын
MotoringEvents Qqqqq
Thank you so much, have been stressing because couldnt get bonnet open for a couple of weeks, ordered new lock and grill (just in case) and followed your instructions, was a little different behind grill because of an air pipe so couldnt get a hammer to it, so used screwdriver, made up the new lock to match key and works lovely, just got to get some plastic screws to hold it all together, did take a couple of hours as was scared shitless and kept stopping to watch video again.
@MotoringEvents
7 жыл бұрын
It's a crazy system isn't it, glad the video helped.
Great video Remove grill as described, side fixings only. Then Rather than break the fitting to enable turning the mechanism, you can use a small 10mm spanner and undo the the actual lock itself. Then lift bonnet and undo electrical connection. The lock will return be left hanging on nonnect catch ready for easy removal with apliers or such like. Less destructive this way
@drelephanttube
3 жыл бұрын
My favorite part was the massive hammer. I would love to do that to mine. Stupidest design ever.
Successfully fixed the bonnet lock on my 2007 Focus by following this video step-by-step! As a total non mechanic, the thought of whacking anything under the bonnet of my car with a lump hammer and chisel seemed pretty alarming, so I made tentative enquiries with a local garage, only to get the usual sharp intake of breath, and a shake of the head, saying it was a nasty job and that the replacement lock cost £90.00 from Ford etc, etc, and that they couldn't do it for a fortnight. I went away wondering what the hell I could do - my MOT is due nest week - and after a sleepless night, decided to be brave and go for it. Took me about an hour all in and completed with no damage to the grill (or any other part of the car!). Trust me - follow the guy step by step and all will be well! It's also worth pointing out that I ordered my replacement lock from ebay (£19.95 plus postage) and this came with it's own key (plus a spare), which meant I could ignore the tricky-looking key barrel assembly part of the video. It just means you have a seperate key for your bonnet lock, which is hardly the end of the world... Cheers for posting this video - saved me the best part of £200.00!
@akbarkhurshidkhan
5 жыл бұрын
The eBay replacement lock sounds like a good bargain, did it serve well after the installation?
Absolutely superb vid. Wish I had seen this before another which shows you have to destroy the front grill to get access. Works as explained. Even having to get another front grill the packege is still over £200 cheaper than a ford garage.. Dfinately following your posts..
Thank you, thank you, thank you !!! Have just done this job on a mate's car. Just removed the two side clips and was able to remove the grill. Slightly more difficult on his car (2007 1.6 petrol) due to the inlet air piping. He is so happy now. BTW Ebay are selling the kits for about £20 !!!
@yowhaatsup
4 жыл бұрын
What are the kids called
good vid. addressed the problem perfectly/ I ,managed to prise the 2 top corner grill clips up und out without chopping the heads off.
Had this happen to me a week ago after I had work done to get my car through an mot, so this was the last thing i needed. This is definitely the best A to Z video I've managed to find. Just got to beat the barrel to death so I can access the cross part. :) or drill as suggested by someone else :)
@MotoringEvents
6 жыл бұрын
Cheers Paul, glad it helped.
Top bloke !!! ..... this got me out of a right mess. You was correct with the 4 middle plastic screws, didn't need to break them in my case. Straight easy video to follow..... thanks again !!!👍👍
@MotoringEvents
Жыл бұрын
Thanks for the comment Steve. Glad it helped.
Mine broke yesterday, soon found your video, brillant worked no prob i think the most fiddley part was getting out that hex peace of plastic out prior to unlocking bonnet but once broke it fell out , great video thank you
My lock refused to open today so glad i found this video, thank you ill have a go next weekend ;)
@MotoringEvents
6 жыл бұрын
Cheers, I hope it goes well.
Thank you so much for this video. I was able to go so far. The old lock was just not coming out. The BIG HAMMER trick worked. I'm in lol. Lock changed in 5 min after that. Had to rip the grill out. Mk2 st.
Thanks for the video, it was very easy and fast. Took me about 10 min.
@MotoringEvents
6 жыл бұрын
Den G cheers Den 👍
Thanks a lot from France for the video. It helps me today!!! 👍🏿
@MotoringEvents
4 жыл бұрын
An international audience! Merci.
Thanks very much! I have the opposite problem, my bonnet won't close. So I need to just replace the latch/catch thingummybob but this has demonstrated what I need to do. Whether I'm apt enough is another matter.
Thank you for the thorough explanation. It helped me understand my problem. In my case the metal cable connecting the lock with the key barrel had the metal bit at the end slipping out of its hole. It was partially working. Luckily it got out in my hands when I had all the parts taken out safely with no damage whatsoever. Greatly appreciate the video!
@MotoringEvents
Жыл бұрын
That's great you were able to fix it without damage. It's amazing at how many points that system breaks. Thanks for your feedback.
Thanks mate, you're a hero. All done and working fine.
@MotoringEvents
5 жыл бұрын
That's brilliant, glad it went well.
God job with the video , very useful many thanks.
Just fitted a new lock this morning. getting the old one to release the bonnet was a bit of a ball ache but got there in the end. And yes you are correct about just chopping the 2 end screws on the grill. thanks for the video - helped me out 100%
@MotoringEvents
7 жыл бұрын
Great you got it sorted, amazing how many cars have the issue. Thaks for confirming about the two end screws. I'll put a note on the description.
Thanks for the video, I followed everything and was done in 40 mins, I bough my new lock off ebay for £22 and it came with keys so i didn't need to mess about with the lock barrel.
@MotoringEvents
6 жыл бұрын
Brilliant, thanks for the feedback.
Thanks for your help. Without your vid I'd have paid Ford to open the wretched thing.
@MotoringEvents
3 жыл бұрын
Glad it helped, they should do it for free.
Thanks pal used the video today and it took me about 15 minutes to sort and I didn't break anything I shouldn't 😂
@MotoringEvents
2 ай бұрын
Fantastic, that’s really quick 👌
Well thats how other people undo their bonnets/ Without you showing me this I would have had to spend a lot of money for a garage to do it. One more thing when I found a replacement on ebay I found that they come complete with 2 new spare keys. Brilliant . Thanks for your help.
great vid bought a new barrel and didnt fit the lock.watched this vid and realized i was doing it all wrong ,took me 5 min to fix CHEERS
Great video thanks, just successfully got into my bonnet after the key wouldn't open it. Just need to order the new parts and put it back together again! Cheers
@MotoringEvents
4 жыл бұрын
Richard Williams glad it helped, thanks for the comment.
Helped me to get it done, cheers
The best thing Ford could do would be to use a cable inside the car, with for example a lever under the corner of the fascia!!!!
@MotoringEvents
5 жыл бұрын
That would work ;-)
@flipper2392
4 жыл бұрын
That would be too easy.
@thatcarguy6190
3 жыл бұрын
OR... just like most other motors use the lever in the passengers footwell what a pointless fuck about with a key behind the badge! 😠
@digitalomen2013
3 жыл бұрын
@@thatcarguy6190 exactly. This lock business is ridiculous. I've just had the problem myself, right after fixing the wiper arms, now the lock won't turn at all. Like it's jammed. Time to get smashy I think.
@bfounzp1680
3 жыл бұрын
It's for theft protection for the engine bay
Excellent video, thank you so much, definitely helped me out. But one thing I notice on this and other vids, people go straight for the hammer once the grille is removed. I decided to just have another go with the key once the grille was off and I could wiggle the assembly around. Managed to get it to engage and open the bonnet with without resorting to breaking stuff. Obviously if that doesn’t work breaking it is the only way to go. Also, warning for Mk2 c-max owners, I bought an assembly off ebay, which I thought was correct but is actually too short. The standard one appears to be 11cm length of the flexi tube part between the last part of the lock barrel and the plastic release assembly (ignoring the rubber gaitor). The one I took out of my c-max is 13cm. So before you start make sure you have the correct unit, and if not, a long screwdriver, 25cm ought to do it, so you can still open and close the bonnet when everything is re-assembled without the lock assembly. Hope this helps someone.
@princess89pinky95
3 жыл бұрын
I was just wondering which section they referred to as long and short. Mines the same as this vid. Bendy tube with white plastic.
@ffffffrancerrrrrr
3 жыл бұрын
@@princess89pinky95 I'm not sure, I didn't buy it by length, I ordered it from a site on ebay, by selecting the car model, but I think they screwed up. Mine is a Focus Cmax mk2, 2008, and basically the unit is approx 2cm longer than the standard Focus one. I never did get one in the end, still using a long screwdriver :)
@matoko123
2 жыл бұрын
Same here, I managed to get it to engage and open the bonnet without resorting to breaking stuff. Then with wd40 and grease got it functioning again :) For now!
Big thanks for your DIY !!!!!! Greetings from Poland :)
@MotoringEvents
5 жыл бұрын
Cheers Michal. Hi from the UK :-)
This is far the most useful video I’ve seen for this problem … and we’ll be using it to fix the problem on my son’s Focus ASAP. Worth noting in review that 1. Only the relatively accessible outer 2 plastic screws needed to be chiselled off in order to get the grille off neatly as shown. And no need to smash up the grille as shown in other videos! 2. The long screwdriver seems to be a much simpler long-term bonnet-opening solution than replacing the mechanism. It seems that you still need to get in and smash that white plastic fitting to access the spot to insert the screwdriver though.
@MotoringEvents
2 жыл бұрын
Correct, I use a long screwdriver now after the third time. Ebay replacement part didnt last long for me. Ford part or screwdrive 👍
Though it took us a little longer (a few hours longer) as we have a different model it worked and I have saved myself over £200 thank you for this video.
@MotoringEvents
Жыл бұрын
Excellent, great to hear.
this worked spot on got replacement for £15 so all good now
THANK YOU £15 KIT ON EBAY DID IT YOU ARE A TOTAL LEGEND SUBCRIBED THANX AGAIN
@brodiefransenharcourtsgold
3 жыл бұрын
what's the kit called
Thanks for taking the time , a great video
@MotoringEvents
6 жыл бұрын
angus5041 thanks for the feedback, glad it helped
Thanks very much , I was dreading this . My Focus bonnet lock failed at Christmas and I just got round to replacing it today . Following the instructions it took me a couple of hours . Be careful , the little white plastic cross shaped piece must be fitted into both parts of the mechanism carefully . Don't shut the lid until you've checked it several times .
@MotoringEvents
3 жыл бұрын
Great advise, glad you got it sorted.
Fantastic guide, thank you so much!
@MotoringEvents
7 жыл бұрын
Thanks for taking the time to comment.
Excellent instruction video. Many thanks for providing your knowledge & expertise to the world. Your guide was essential in helping me to fix my Ford focus bonnet locking mechanism by myself and in the process, saved me a lot of money. Greatly appreciated.
@MotoringEvents
2 ай бұрын
Thanks for the feedback, very much appreciated.
Thanks for this. I followed some advice elsewhere that suggested if the white cross piece is simply loose, not broken, then you can try putting pressure on the lock (flexing the grill) while turning the key. That got the bonnet open so I could take it all apart. I used this video to find my way around the assembly: 1) Removed the plastic screws from 6:35 (some with a screwdriver, some by prising up with a sharp tool) allowing me to remove the grill (with some force for the bottom clips) and top panel. 2) Unbolted and popped out the latch assembly (see 10:15) and then I could pop the white cylindrical shroud through the hole without having to break it. 3) Used pliers to remove the cross piece from the latch (takes a bit of force but came out intact), like at 11:52. 4) Clipped the piece into the cross-shaped slot in the other end, using a screwdriver to nudge the clips in, so it looks like 15:47. 5) Rebuilt everything, and it's all good!
@MotoringEvents
6 жыл бұрын
That worked for me once, but I stupidly closed the bonnet and it never worked again :( Thanks for posting though, it will help some prople im sure.
Thanks man. Was pisssing me right off
Brilliant video, thank you - managed to accidentally relatch my bonnet after breaking in with the long screwdriver method through the grille so now having to go invasive with the hammer method - very useful to see how the lock works and how to change the barrel etc. 🙌
@MotoringEvents
5 ай бұрын
Lol, it’s a good day when you have to go hammer 👍
I had the same problem. I just have an observation. You can reach and cut off the two side screws with a knife, this way you can cut off easily and you won't damage the painting on the bonnet or bumper. Great video helped me a lot. Thanks!!
@MotoringEvents
5 жыл бұрын
Thanks for the tip. Glad the video helped.
Absolutely spot on that mate. Nice1. Had this problem, needed to get bonnet open yesterday, couldn't, watched your video last night, executed part A tonight after work. Spot on, didn't take too long. Just need to get a new barrel kit off Amazon now. Thanks again mate, life saver
@MotoringEvents
3 жыл бұрын
Glad it helped, it's such a stupid system. Ive got a Mk2 faceflit now, same problem!
@MotoringEvents
3 жыл бұрын
By the way the ebay ones seem ok too.
@AngryBulldogg
3 жыл бұрын
@@MotoringEvents cheers man. Was checking them on Amazon last night, £25. Clipped it all back for now but pulls out easy enough when I come to fit new one
Helped me out loads mate... much appreciated 👍🏽
@MotoringEvents
3 жыл бұрын
Glad it helped
very very helpful!!! Big thanks!!
Thanks for the video managed to do this and replace the lock successfully, thanks for your help cheers
@MotoringEvents
10 ай бұрын
Cheers Andy, glad it helped.
Thanks for posting this. I had to get into my daughter’s 2010 Focus yesterday ,the bonnet shut fast, your film was a great help. I sprung out the grille lower pegs then the 2 upper outer fixings after levering the bonnet corners up with a wedge and getting under the grille flange to pop the push in fixings out. Breaking the plastic fitment wasn’t so easy with the bonnet locked down and required multiple hits with a big screwdriver and hammer. I was very relieved when the secondary safety latch gave in and I could lift the bonnet. We ordered a replacement release mech so as a temporary hood retention I used a big/long cable tie over the striker bar and thru the cross beam hole where the latch would be. It all pulled down tightly and just to be sure I used a 2nd cable tie. New one arrives Tuesday. Thanks again.
@MotoringEvents
4 жыл бұрын
Thanks for the feedback, glad the video helped.
Engineer who invented this system does not drive a Focus for sure :-)
Saved a fortune! Thanks guys. Huge help
@MotoringEvents
2 жыл бұрын
Glad it helped.
Thank a lot from French Beginner, Im save money ,
You clever person you ....thanks!
Got the same problem and will need to do something very soon to open. I'm not a DIY man but your video helps a lot!
@MotoringEvents
11 ай бұрын
It’s not too bad, the only thing is to be prepared to get break the plastic end of the locking unit. I hit it with a heavy hammer which may having been over the top but it did the job. Good luck.
After watching your informative video i ordered this part but beforehand i had changed the whole lock system !!, i decided to change the new part as per your video !! Just in case it happened again . I then found out that ford had upgraded this part to a black plastic insert on the new locking system without telling anybody !!, so at least i have a spare just in case it happens again . Hopefully not
@MotoringEvents
Жыл бұрын
Hi that’s interesting what was the black insert Ford used?
Excelent. Helps me a lot
Just had to do this for my ford 2011, was a pig of q job, but did work. I now use a screw driver as a key
@MotoringEvents
Жыл бұрын
Glad you got it sorted, the last time it happened I just used a screwdriver too.
Thanks a lot for this. I trust my mechanic but even so, saved me some money here, so I'm very grateful sir! I prized up the two plastic holding screws up, like Kesslerden said and they went back a treat. Unfortunately the cost of the lock in your link is now £90!! (inflation inflation🤦) After market ones on Amazon for £19 so think I'll go there....but will it fit the existing barrell though, who knows, they come with keys anyway! Thanks for your time, to make this, really helpful.👏👏👏
@MotoringEvents
2 ай бұрын
Fantastic, glad it helped. Some of the aftermarket ones may not last as long as the ford part. I had a aftermarket one break so I ended up taking it out and using a long screwdriver:-) My first Mk 2 I used the ford part which lasted the life of the car. Just info. £90 is a lot!
Thanks for the guide. Did it yesterday on my 2007 Ford Focus MK2. Removed the grill without breaking of the side screws but instead placed a large flat screwdriver between the 2 plastic parts on the side screws and twisted the screwdriver so the screws popped out and could be reused.
@MotoringEvents
10 ай бұрын
That's great advice, pinned. Thanks rich
Thanks so much for your help.
@MotoringEvents
6 жыл бұрын
Cheers Andrew
Thanks helped Me get into mine again lol. 👍
Great video, just finished doing this on my 11 plate, hardest part for me was removing the grill. Thanks
@MotoringEvents
Жыл бұрын
It's such a pain, glad you got it done.
I yanked the whole grill away (including some of the plastic covering sadly) by knocking out the 2 retaining plastic rivets either side of the grill and freeing the 2 clips along the bottom. Yanked off the wire then used a hammer to knock of the white plastic bit, then used pliers to twist one way and then the other to open bonnet. You can see the 2 rivets quite easily by lifting the bonnet as much as you can.
@MotoringEvents
Жыл бұрын
Brilliant, thanks for sharing.
EXCELLENT TUTORIAL. Thank you. Everything worked as you said, no problem. You can get the kits now off eBay for about £15.
@MotoringEvents
5 жыл бұрын
Glad it helped. Are the ebay kits Ford? Whats the quality like? Thanks Rich
@koll789
5 жыл бұрын
@@MotoringEvents Not genuine Ford, it was from the far east via a UK supplier. It arrived in two days. I didn't have any problems fitting it and it works fine. I used my own barrel lock so I can't vouch for the rest of the kit, but it all fits, it all works. Job done. Thanks again, you saved me a lot of money. I dread to think what a Ford dealer would have charged.
@TheNigeljohnson
5 жыл бұрын
How long did it take to do? Just had the garage tell me it's 3 hours labour costs.
@MotoringEvents
5 жыл бұрын
Chris Shades cheers, good info.
@MotoringEvents
5 жыл бұрын
Nigel Johnson if I had to don't again 30mins. But I think garages break the grill, so more expensive too.
Good vid many thanks
Really helpful
Brilliant, just changed my bonnet lock using this video!!!
Excellent video...Thank you
@MotoringEvents
2 ай бұрын
Cheers 👍
Nice video, thanks :)
Thank you so much, this helped me out a lot 👍👍
@MotoringEvents
Жыл бұрын
Glad it helped 👍
My old mk1 has just done this... apparently very common across many generations of Focus. I'll get out and try this method tomorrow although given the age of this car I don't think I'll be looking to replace anything :)
@MotoringEvents
5 жыл бұрын
Good luck, It would be good to know how it works with the Mk1.
Very Helpful! Thanks. Although I tried getting away with the two side screws only, it didn't want to pull out. I've ended up breaking a lot of the plastic whatnots that clip it all in, maybe because its -2c out there and its all brittle with the cold or maybe just me getting frustrated and impatient. At least I can change the headlight bulb now.
@MotoringEvents
Жыл бұрын
That's a shame, hats off to you, it's a bit of a flaff at the best of times let alone in -2!
Great video, Really helped . Cheers
@MotoringEvents
6 ай бұрын
Cheers David glad it helped.