FMS K-10 upgrade series episode 1 lift wheels tires
#rccar #rctruck #axial #minicrawler #rc #rccrawler #fms #paidlink
Injora wheels
amzn.to/3ISZTU7
Injora tires
amzn.to/3kiiBKp
Fms k-10
amzn.to/3JsCfOt
#rccar #rctruck #axial #minicrawler #rc #rccrawler #fms #paidlink
Injora wheels
amzn.to/3ISZTU7
Injora tires
amzn.to/3kiiBKp
Fms k-10
amzn.to/3JsCfOt
Пікірлер: 51
I love the way those white wagon wheels make the truck look.
@obrothersrc
Жыл бұрын
Thank you, Def the best wheel for the stock fms. Retro look and they widen the stance a bit.
You did a great job!
Looking good buddy and performing good to nice job
Very pretty in this color 😍 awesome truck 👍😉 good job my Friend 👍
Looks much better and works much better now.
@obrothersrc
Жыл бұрын
Thank you, it is a great looking truck. Not a lot of aftermarket parts out there to upgrade it though
Good job with the mods brother 👏
Good video! Subscribed
@obrothersrc
Жыл бұрын
Thanks, i def appreciate that. ive got alot of cool stufff coming up. 👍
Great tips. I’ve got the glacier k10. Got those same wheels. Thinking about a new servo and a 1080 to replace the anemic setup that the glacier comes with. I have a roll bar for tge back as well, and was thinking about putting the tires in the back like that
@obrothersrc
Жыл бұрын
Awesome, sounds sweet. I like the glaciers color.
I was gonna figure out some cup spacers for the shocks or get new longer shocks if I couldn't figure it out but I like your idea better, saves me money lol. I love how your truck looks without the bumper. I will invest in some new wheels tho.
@obrothersrc
Жыл бұрын
Thanks, it works alot better without the rear bumper. Wheels and tires really take a vehicle to the next level.
If you took the springs out what is holding it up?
any links to wheels and tires suggestions?
With the higher suspension, the drive shafts don't come off?
@obrothersrc
2 жыл бұрын
I have run it alot and have had no problems w the driveshafts overextending or coming out.
Where did you get the longer screws for the shock relocation?
@obrothersrc
Жыл бұрын
I have a pile of extra screws so i just pulled them from there. Sorry i dont have a link for u.
I'm doing the same to my truck. How did you take the shocks apart to get the springs off?
@itaylormadeit4u
Жыл бұрын
Never mind. I just figured it out. 2mm hex bolt inside the shock tube. :)
@obrothersrc
Жыл бұрын
You can also unscrew the shock shaft from the bottom retainer.
Great! Excellent! I'm from Brazil, and I'm going to buy it. Do you know if it is possible to upgrade the engine to more torque? My desire is to have fun pulling some weights and carrying loads.
@obrothersrc
2 жыл бұрын
Hi marcelo, this truck is great but it does not have alot of of parts to choose from for upgrading. I havnt found a motor w the right screw hole pattern to fit this truck yet. There might be one from another truck but i do not know one yet. If u want to pull stuff or carry loads it will probably strip the gears out as well so im not sure this is a good choice for those activities.
@wise--men
2 жыл бұрын
@@obrothersrc Thanks for the gears warning!
@robertstein698
Жыл бұрын
@@obrothersrc Just add an adapter plate between the engine and the gear, which is matching the hole pattern at one side to the engine and at the other side to the gear.
Awesome video! Are the tires as big as the Little Guy Racing Trail Kings?
@obrothersrc
Жыл бұрын
I do not have any little guy tires so not sure. I am doing a video today on injora tires though. I will be showing the size difference compared to scx 24 and fms stock tires so that should give u a good reference point. I should have it up tomorrow
That's 🔥🔥🔥. Love what u did with it. What servo upgrade did u go with?
@obrothersrc
Жыл бұрын
It is a 12 gram cheapo that is no longer available from amazon. I would recommend the emax servo if u want to upgrade. But u can find cheaper ones on amazon w a quick search.
@vic_2576
Жыл бұрын
@@obrothersrc thanks man!
@vic_2576
Жыл бұрын
By the way I noticed the emax is a 3 wire servo. How would you use that oppose to the 5 wire servo it comes with?
What size hubs to extend the wheels? Yours looks nice 👍🏼🥹
@obrothersrc
Жыл бұрын
I did not use extensions, just use rc4wd 1.0 stamped steel and run them deep dish style to get a wide offset. i suggest getting the ones made by injora though. They are cheaper and easier to install.
Wish it came from the factory like this for an extra 75 bucks... Still it would be cool if you could link everything you used in the description to mod this beast.
@obrothersrc
Жыл бұрын
I will put them up as soon as i get a chance, just wheels tires and a servo though
What servo did you use and is it plug and play?
@obrothersrc
7 ай бұрын
E maxx is the best choice for micro servo. As far as the lift the answer is yes. I would recommend taking a look at the fms toyota hilux videos i have as well. They are the same except for the body.
Link for the servo ?
I just think that on the front axle on the one side it’s a lot stiffer than the other Idk it just bothers me anyway to fix
@obrothersrc
8 күн бұрын
You r correct. These older k-10s have allot of issues. Actually so do the new ones. I do not buy fms vehicles anymore.
Salut, quelle servo moteur utilise tu?
@obrothersrc
Жыл бұрын
I use the e max servo
What size are the tires?
@obrothersrc
Жыл бұрын
They are 1.0 austar/ injora swampers
04:52 to 06:27 music title please
@obrothersrc
Жыл бұрын
Its just some generic tracks from imovie strung together. I dont remember what they are, but u can find them in imovie app.