Almost 10 years of Sim experience and now is when I learned how to put in routes. Thanks a bunch

@Q8Pilot

6 жыл бұрын

xjt10 Glad this was useful for you =) Happy flying!

Oh god... I finally found someone that made sense. I joined SimBrief thanks to you. You never steer me wrong Osameh. MUCH appreciated!

you are actually the reason I learned how to fly certain aircrafts and now how to work the fmc I can't thank you enough. Keep it up

@Q8Pilot

7 жыл бұрын

This comment made my day today. Thank you sir.

@youraveragepilot9938

7 жыл бұрын

I'm glad because you are helping me achieve my dream

@youraveragepilot9938

7 жыл бұрын

What do the V1 V2and TOW mean?

@omar72999

7 жыл бұрын

futurepilot 777 I'm not a real pilot or an aviation expert, but I'll try to help you as much as I can. V1 is the speed at which you can no longer abort a takeoff. Say for example, you had an engine failure while running down the runway and your speed is less than the V1 speed. If that happens, you will still have enough time and runway to break safely. Your V2 is the speed that you'll use during your initial climb. V2+15 is the speed at which it's safe the pull up the landing gear and decrease the flaps down to 0.

@ryankrekeler1292

7 жыл бұрын

THConer hey can you help me too? I tried but cant remove the 2 discocontinuity. Is it possible that the nav data is out of date? Can i do it without buying vatsim?

Your youtube channel intro has got to be one of the best.

As a flightsim noob I was waiting for a good tutorial on this topic. Thank you!

@moe2898

7 жыл бұрын

Yep. It took me a long time before I got the hang of flight sims. Really requires a lot of dedication and self-teaching, at least in my opinion, so you can really get a hang of it. If there were some more detailed guides like this, then I think the community would be so much larger.

@Q8Pilot

7 жыл бұрын

Glad this was useful for you and thank you for watching!

@Q8Pilot

7 жыл бұрын

Thank you for your kind words and for watching the video!

@theorangecactus2177

7 жыл бұрын

Q8Pilot hum... two questions, one what/how did you get the ground services to show up and two is this x-plane 10 or 11?

@2010sirtaj

7 жыл бұрын

The Orange Cactus for ground services you need "ground Handling" by JAR design

OK ....thanks ....I am getting through next level stages of learning flight simming as you notice....thanks to yours and other tutorials I understand more every day

Best explanation ever ! Clear and concise :) Easy to follow !

Thank you so much for this tutorial mate. This is why I subscribed to you.

@Q8Pilot

7 жыл бұрын

Glad this was useful for you mate. Welcome to my channel, cheers =)

Thank you. The best tutorial, i've ever seen.

Thankyou so much for actually using the IXEG 737 for this tutorial! I can see now see a mistake that I was making and you explained it very well.Well done!

@Q8Pilot

7 жыл бұрын

Glad this was helpful for you James!

I've poured over countless videos on FMC tutorials on KZread and this is definitely the best one I've seen to date. Your enthusiasm with your videos is intoxicating and is one of the reasons I've gotten so into flight simulation over the years. Keep up the great work.

This is very informative. I am learning how to use my JARDesign A320 and this helps a lot!

Well done my friend. This was a well presented video to help people who are unsure or intimidated by flight planning. Btw nice intro! Take care

@Q8Pilot

7 жыл бұрын

Thanks Andy =)

Thank you very much! Very thorough tutorial!

Excellent tutorial. Thank you!

Your channel is providing to the point information I look for. Video quality is good in terms of sound and recordings and also in terms of content you provide. Appreciate that really. Question, I understand that the flight dispatch documents provides information about Route\SID\Stars and block fuel values. The gross weight (Payload + ZFW) is provided by ground officials along with trim settings via load sheet, signed at the end by Captain. Would appreciate for correcting me. Regards,

Great video as always. I especially liked the scenery of my home city at the end of the video. :-)

@Q8Pilot

7 жыл бұрын

Miro Khouzam Glad you enjoyed the video =)

Great video yet again Osamah and very timely as I have just purchased XP11 Boeing 777 package!

@Q8Pilot

7 жыл бұрын

Glad this was helpful for you my friend. Enjoy the 777 and XP11 =)

Thank you soooo much! I really appreciate your videos

Another great video. Thank you much.

Good tutorial Osamah. It's been a while since I used FMS. I like Simbrief it's very comprehensive

@Q8Pilot

7 жыл бұрын

Rand Cooley Thanks Rand. I do like simbrief a lot.

Precious informations, thank you!

thanks great video..

i always use simbrief,just Amazing...great video again

@Q8Pilot

7 жыл бұрын

Thanks Alex =)

awesome tutorial. thanks!

Many thanks Osamah, this video helped me a lot.

@Q8Pilot

7 жыл бұрын

Silvio Clenio Rodrigues Fernandes Glad it helped my friend =)

Awsome video needed this tutorial real bad!

@Q8Pilot

7 жыл бұрын

Glad this helped!

Finally a good FMC Explain

Thank you! Your the first person I have ever found to explain this slowly and clearly. My questions are, do you normally know which runway your are landing on during the flight planning stage? And if not, do you file a flight plan just up to the last way point? Or do you assume a STAR, and change it later in flight if you get a different runway? And if so, how do you delete that old STAR?

@Q8Pilot

5 жыл бұрын

Thank you for watching. Normally you would know landing runway and star during flight planing. In real life though landing runway and star is provided by ATC. You always predict landing runway based on weather. As weather may change, you will need to consult ATIS for destination weather to be able to make predictions.

You are The Best :)

Once again an excellent tutorial

@Q8Pilot

7 жыл бұрын

Thank you my friend =)

Hello and thank you for such a great video! I have a question in regards to your particular FMC. I am using X-Plane 11, and all of the FMC's on each enabled aircraft (that come with the sim) look different then the one you are using, and doesn't include a route menu page nor a page for inputting weight, fuel, etc., which leaves a lot of missing information for the flight. How do I go about inputting this one a simpler FMC? Thank you!

@Q8Pilot

7 жыл бұрын

Thank you for your kind words. The FMC used in this video is that of the payware IXEG 737 which is available at www.x-aviation.com,

Hi. so when I tried inputting the SIDS and STARS into the FMS, both the SIDS and the STARS that were on simbrief weren't on the FMS. I was flying a 777L from KSAN to KSFO. How do I make them appear? Thanks

Hi, Q8Pilot excellent videos. How do you get your flight plan info to stay in view when programming the info into the FMC. Thanks

Thank you Q8Pilot, awesome tutorial! I'm left with one question, though. What about speed, where do you put that in? Or does the FMC automatically set the optimal speed, - or did I miss it?

Hello, thanks for this video, it's very useful. I have a question, i'm using the default 737 on XP11 and I have a problem programming the FMC. I enter the departure and arrival airport, then i enter the SID and STAR but when I watch the legs, i have route discontinuity like you have in this video. But when i come back to the route, it says direct in the VIA column and i can't enter an airway. I can only fill the "TO" column. Any idea how i change that? Thanks!

This was so good. Thanks alot

@Q8Pilot

7 жыл бұрын

Thanks for watching my friend!

Amazing tutorial! May I ask where you got those charts?

Where idd jou get that groundthing information from IXEG?

say, hi again. i set up flight plan and set heading to first way point in plane panel. then i ended going west instead of east. should i set heading and course to 0 or what do you suggest?

Thanks!

Very good helpful video for many flightsimers

@Q8Pilot

7 жыл бұрын

Thanks VIC =)

One question on your video, where can i download that ground service chart to add to my Simbrief? Thanks for the video.

At each way point, how does the altitude get set in? Do you have to manually enter the altitude and plug it in for each way point? So that during A/P, it will fly to that altitude at the specific way point.

I'm new to this as well, the new version of the FMC that X11 is using doesnt seem to want to work the way you are doing it... It is getting kind of irritating. I have a subscription to Navigraph so everything is updated, but not all of the points or air ways are there. What am I doing wrong? Edit: I see that you are using a payware one. Is there a tutorial that you have where you use a default aircraft?

Friend a doubt, when I fly in the x737 and keep the flight (situation) and the other day cargo flight all the settings of the plane are reset, buttons, radios, FMC, nose that can be done in that case

Hi! I discovered simBrief for 15 days and I find it super convenient. Thank you for making a video for use with the IXEG B733. Right now I am getting used to the FF A320 Ultimate and it seems that one can directly integrate the flight plan in his MCDU. As I know you have to practice this plane since its release and maybe even before. So my question is: do you have the solution and which one? Thank you and see you soon

What is that ground services window you use to get information from?

What do you do if have 2 (or more) airways?

where you put your departure like the boxi3e my one on simbreif says karrl (im doing a different flp) so i got to insert karrl but its not there on my departure

Thank you.How to draw an extended runway centreline?

thanks for the video. Could you explain in your next video what this "derate" take off speeds are and how to use them? cheers

@Q8Pilot

7 жыл бұрын

ElTcheko Thanks for watching buddy, will make a note of that for sure.

Thank you, Captain. Ma ga9ar6.

Thanks for the video, it's really helpful! I'm a little confused about the transitions, though. At one point you said transition was DESDI, and then you said the transition was REREK. Is DESDI just a way point from the airway to the REREK transition into the STAR?

Has the "HOLD" page been implemented yet?

why did you change thr destination runway from 12R to 12L I couldn't see the reason, TIA

My FMC doesn't show the same options as yours does. The first problem was it didn't let me copy and paste the coordinates onto the 'scratch pad' (at 12:04). I press route anyway and the next page yours says 'route' where mine says 'save route' and also at the bottom mine says ' perf init'. If I click save route, it beeps at me and nothing else happens. If I click on perf init, it takes me to a page that seems to be all about fuel. I looked through my simbrief flight plan and I can't see any of the units that match the units on the FMC screen (GW/CRZ CG; ZFW; Trip/CRZ ALT; CRZ/WIND; Cost Index; RESERVES). Can you please tell me where I went wrong?

Thanks, helped a lot

@philippstark5803

7 жыл бұрын

Another question, how can I make the automatic TOD? When I cross the TOD, it just doesn't want to descent

@Q8Pilot

7 жыл бұрын

Glad this helped you =) TOD should begin automatically in the IXEG 737 provided the MCP altitude is set. Sometimes, the VNAV speed changes at TOD, and hence the aircraft will need to slow down before it can descent. Monitor your VNAV speed. You may need to speed brakes for additional drag.

@philippstark5803

7 жыл бұрын

Q8Pilot Thank you very much :)

i ended up with one waypoint in red in route finder. what does that mean?

if we have to enter the info by hand the why are we having simbreif export and save *.fms files to xplane i thought these were to be loaded into the fms

How did you enter the fuel at the beginning ?

looks very hard to do !!! well for someone like my self it is not a big computer guy however I dint clearly understand so you saying that if I have a membership with Navigraph I will not need to enter the flight plan manually? because that is my issue getting around the FMC

How do you get that ground service thing to pop up

I always have a problem with that simbrief route. The Route you are flying contains a SID i dont have in my FMC: BOXI3E BOXIK B416 AMBIK UB416 GOGMA UM677 OBNET M677 VUTEB VUTE3E VUTE3B does not appear in my FMC. Using AIRAC 1903. Only Freeware. Any ideas? Happens on nearly any FP i creat on Simbrief that i have SIDs that i cant select in my FMC

Cool intro

Great tutorial, i couldn't find Eclipse 550 NG in simbrief airplane library, and my question is can i choose another airplane which have same spec. like Eclipse ? and which one it will be ?...... Regards

@Z31SPL

7 жыл бұрын

maybe try using a lear jet or something similar but you have to remember since you are not using your exact aircraft the weight, fuel loads, range and speeds will not be accurate to the simbrief plan for the lear jet and you will need to use your own judgment on those type of things.

when we put the arrival details in my simbrief doesnt show me any arrival things where yours are. do u know why this could be happening?

I am unable to input any information in the fmc. Do you have to download something in order for me to input my way points. thanks

Not sure you will see this, however I am a mac pro 5,1 user with 6 cores at 3.33, 32gb ram and 8gb vram on my rx580. What I seek is any confirmation you csn give that the jar A330-200 is suitable for mac x-plane 11 ver 11.32 r2. I have read that these jar aircraft are VERY buggy, and in some circumstances the sound crashes xp11 mac machines. You have used these machines (I think) so you can possibly advise if my $60 outlay for a jar a330 is money well spent. The DwA330 is only $38 but is not as complete as the jar a330 ( is this true?).. You help is appreciated.

Do you then use LNAV and VNAV to fly the route?

The correct arrival transition is not always showing up in the FMC. What to do then?

Best fmc tutorial

Where you get ground services?

Great video but I've got a question. How do you make the plane lose all of its power and as I have fsx and don't have ground operations does simbrief tell you all the fuel options and reserved?

@Q8Pilot

7 жыл бұрын

Yes simbrief will provide you with detailed fuel information for your flight.

Thanks a lot for the good and fast explanation! Now how do you reset the FMC? Sometimes I cannot enter DEL into the scratchpad.

@Q8Pilot

7 жыл бұрын

If you want to reset complete, reload the aircraft all together.

@TiramisuCorleone

7 жыл бұрын

Ok, I just wondered how real pilots do it. I guess they shut down the airplane completely in order to reset the FMC.

@Q8Pilot

7 жыл бұрын

Yes if the aircraft loose power completely, then the FMC would reset.

Hello everyone. Im a total newbie to the "flight-sim" world. I understand how I can "program" the fmc like in the video, but how do I "activate" the plan. Do I have to activate the autopilot when im in the air or how does that work? Greetings from Germany

How to set the settings so I could practice a320 emergency procedures in msfs2020?

Thanks a lot, you've just earned new subscriber! :) But I have got one question... where did you get and how do you plan that "ground services" (starts at 16:50)?

@Q8Pilot

7 жыл бұрын

Welcome to my channel. The ground service in this video is built-in with the aircraft.

@geronut

7 жыл бұрын

Does it work with FSX or it's just for X-Plane?

@Q8Pilot

7 жыл бұрын

The IXEG 737 only works in x-plane.

i did the flight plan but there was no departure arrival isnt there thank you! IM just the same as before

Great instructional video, thanks for posting this. Question 4 you or the group here. I'm new to FMC- I know the basics. I paid for update Navigraph subscription and downloaded recent AIRAC cycle for my Plane in the Sim which is a Wilco 777-200ER. One question is, the new AIRAC cycle show correctly in my FMC CDU screen ok. But when I enter say New York (KJFK airport then try choosing runway 31L or 31R for Departing its not there listed as an option. It only showing 1/1 pages so there isn't another page. Only runways showing for KJFK are RW04L, RW04R, RW13L, RW13R & RW22L) thats it- No runway 31L or 31R for departures. Strange thing is on my FMC if I try seeing what runways are available at KJFK for Arrivals I'm seeing all runways including 31L, 31R. But I noticed its also missing IAPs- they show the runways but do not list ILS or RNAV approaches. Anyone have a clue whats going on or how to fix/remedy this issue? or experienced this themselves?

@Q8Pilot

2 жыл бұрын

Hello there, are you selecting runway first or SID/star first? Also make sure the airac is updated for the aircraft and sim. Are you using xp11?

@Mikinct

2 жыл бұрын

@@Q8Pilot thanks 4 reply I’m new to flight simming- Just have FS9. Bought Wilco 777 & updated navigraph airac cycle. Just strange that FMC doesn’t even list runway 31r or 31l as options for departures. Yes fs9 is dated but it’s what got me into hobby. Will plan on upgrading soon

How do i find cost Index in simbrief??

Hey @Q8pilot. I seem to be struggling to find the star that allows me to line up with the runway. It happened on my Rotate MD11 now it's happened on my 737 zibo. On my sim brief flight plan the star is loaded but on my aircraft it is no where near. any solution's?

@Q8Pilot

Жыл бұрын

Do you have the latest AIRAC database for the sim and airplane?

GREAT VIDEO! I did a simbrief from KSEA to Kolm. When I go to my FMC and attempt to enter the co fight plan I get this error message. "This flight plan was saved with a different AIRAC. Currently loaded in X plane is :1708. Please help, what does this message mean (the FMC DOES NOT adopt the simbrief plan. What do I need to do to get my FMC to fly the simbrief plan?? With thanks and appreciation. Joe

@Q8Pilot

4 жыл бұрын

The AIRAC database do not match. You will need to update your AIRAC database for simbrief and for your aircraft/sim.

@joetraigleactivistaward2492

4 жыл бұрын

@@Q8Pilot Thank you, how do I do that? Thank you. Joe Traigle

@Q8Pilot

4 жыл бұрын

@@joetraigleactivistaward2492 You need to obtain Navigraph subscription. www.navigraph.com

@joetraigleactivistaward2492

4 жыл бұрын

@@Q8Pilot I already have one. I am not sure I have connected it to the FMC correctly. Ideas? With thanks and appreciation. Joe Traigle

Osamah thanks, great tutorial ... but ...how does the FMC already know these SIDS AND STARS ......or... how do I load up-to -date AIRACS into my flight planning computer.I tried flight planning with SIMBRIEF one day, but got immediately confused since the planes FMC rejected most waypoints as unknown????

@Q8Pilot

7 жыл бұрын

Hi Jan, the FMC will have the SIDS and STARS already. You don't need to do anything to load them up they are there. You need to, however, update your Nav Database. You will need to make sure that the AIRAC version of the sim is the same as the aircraft and the flight planning tool. Otherwise, you will end up with the issue you describe here. I recommend NavDataPro or Navigraph to keep all your databases up-to-date. Please do let me know if you have any further questions on this. You can also email me at info@q8pilot.com if needed.

How to use it like what to turn on after climb

Wait, you can update your FMC so that it has the current data? How do you do this? I always have out of date FMC information and struggle when I have a SID that is slightly different.

@Q8Pilot

7 жыл бұрын

Sure you can, just update the path of the IXEG in navigraph and it will update the dataset for you.

@moe2898

7 жыл бұрын

Thanks! I assume it's the same process for other add-on aircraft. Also, what about the default aircraft? I don't have much experience with those. I apologize about bombarding you with questions, but I appreciate your time and answers. Subscribed.

@Q8Pilot

7 жыл бұрын

Happy to receive your questions anytime. For all default aircraft, you just need to update XP11 database. Navigraph has support for XP11 already. Let me know if you have any more questions.

@clauselldortch8348

7 жыл бұрын

I do not know what IXEG stands for. Can you guide me? Where do I find this in Navigraph?

@Q8Pilot

7 жыл бұрын

IXEG stands for International X-Plane Engineering Group. You can find navigraph at www.navigraph.com.

when i type in the route, it says that the STAR or Fix "DESD1B" was not found, idk why , i used the STAR DESD8B instead and it worked

@Q8Pilot

6 жыл бұрын

Im Hassan Depends on the Airac database version you are using. The video was done some time back.

can you make a video on how to enter that info on 777 please

Hello my friend, why did you chose for destination 12L instead of 12R ? Although simbrief gives the route with ending in to 12R. Cheers.

@Q8Pilot

7 жыл бұрын

That was a mistake on my part, sorry =)

@egemukan

7 жыл бұрын

Q8Pilot No prob. Thanx ;)

@egemukan

7 жыл бұрын

Hello Q8Pilot, by the way, does this effect the legs regarding approach ?

i have beoing 747-8i i have update with navigraph 1704 when i put flighplan form simbrief my atc tell me i,am off crouse if the plan from simbrief call 1406 do that have to show up in the fmc think you for your help

@Q8Pilot

7 жыл бұрын

Nothing wrong with you aircraft or the Nav database. This is X-Plane ATC problem.

@clauselldortch8348

7 жыл бұрын

think you for your help ps high can fix this atc problem

Which recording program do you use for capturing x-plane ?

@Q8Pilot

7 жыл бұрын

I use ShadowPlay for everything.

@RocksGamingGER

7 жыл бұрын

Q8Pilot do you use also the shadowplay voice from you? Or did you use audacity or something like that?

@Q8Pilot

7 жыл бұрын

Everything using ShadowPlay =)

Would you know why I always get CRZ unable on the flight factor 767?

@Q8Pilot

7 жыл бұрын

luvmywetpets 2 things can cause this. Either fuel is not sufficient for route and altitude or there is a restriction at a waypoint at which you will be at a higher altitude.

@luvmywetpets

7 жыл бұрын

i use simbrief and it still gives me the same message. stummped?

@luvmywetpets

7 жыл бұрын

thank you had a sucessful flight from Washington DC to West Palm Beach Florida Flight Factor 767!

@Q8Pilot

7 жыл бұрын

luvmywetpets That's normal with any flight planning tool. consult the airway details. You may need to manually adjust altitude for a waypoint.

Can you do this for an fmc and an xbox?

@Q8Pilot

Жыл бұрын

I don't have xbox sorry.

hey q8, in your previous video where you showed the cn tower in toronto, I flew there because I wanted to see it in its true glory. But when I got there, it was just an extremely tall and skinny building. I am extremely curious as to why this is. In ny setting I have everything on maximum (like number of world objects etc). Thanks for reading and responding!

@Q8Pilot

7 жыл бұрын

It is a freeware scenery at the x-plane org. Just search by ICAO code of the airport and you will find it =)

@spotskcaj

7 жыл бұрын

CYTZ?

@Q8Pilot

7 жыл бұрын

Correct!

@spotskcaj

7 жыл бұрын

ive been trying to figure it out, but Im a but of a noob when it comes to this.

@Q8Pilot

7 жыл бұрын

Always a pleasure to receive your questions my friend =)

For the star on the dep/arr u picked 12L when it said 12R. Why?

@cxzmyc

6 жыл бұрын

Jamon Austin just a little mistake! I'm sure I would have made the same mistake if I was making a video at 9:00 at night :)

OKBK is not accepted, becuz this is AIRAC 1702, and we cannot go back and unlock it in Nov 2017. So I'm not able to follow along, more's the pity.

Please help. for me simbrief doesnt make approaches its just does it directly through some waypoints and doesnt do an approach to the right runway. please help

@FusionTrain

7 жыл бұрын

Im about to give up on flight simming. nobody ever answers my questions

@Q8Pilot

7 жыл бұрын

I am not sure I understand your problem. Can you explain further please?

how does one use vatsim flight plan from simbrief?

@ericc7936

5 жыл бұрын

got it

can you make this FMC tutorial for default 738 in XP11 ???

@Q8Pilot

Жыл бұрын

So you mean the Default X-Plane 12 FMC. It works for all aircraft where fitted. But yes, I can make that tutorial. Stay tuned.

What I still don't get is how to fill out the perf init page and the init ref page. Does simbrief give u information about that

@Q8Pilot

7 жыл бұрын

SimBrief pretty much gives all the information you need. Which particular piece of information you are referring to?

@benhope5864

7 жыл бұрын

Basically just filling out the perf init page like with the cost index and all that stuff and also the init ref page. Not really a particular piece and like where do u get the information for those pages