What you Will Need: bit.ly/2IFFQXT (Multi Module Choose FRSKY)

@garyjohn1076

5 жыл бұрын

How do you bind the Rm9?

@garyjohn1076

5 жыл бұрын

with the reciver? I couldn't get it to work.. can you help me?

@mikehauk6079

4 жыл бұрын

Why FrSky & not Flysky?

@thomasgilbert6924

3 жыл бұрын

@@mikehauk6079 fly sky is to flysky recivere and frsky is to XM+ 👍

@ferdlhofreiter45

3 жыл бұрын

I see u decided to not make second parts for 2 parts videos (like this one, or the flysky amplifier) and instead turned to doing commercials. well played.

Finally you did it!! i've been looking for a Flysky I6 to FrSky mode for so long! Thanks mate like always great vid, keep it rocking!

That's pretty nice, dude! 😃 I'm going to be waiting for part 2!

that great you did it,, im using frsky dht module in fs-i6 its super simple to add ppm wire and +- and ready to go, but you need to cut power wire for existing stock module otherwise it will suck battery quick.

Just tested something very similar to this on a friends radio (Also FS-i6). Can confirm that it works flawlessly with TBS Crossfire. I did something like this about 3 years ago to a old Turnigy radio;) Keep it up! Having a 3D printed enclosure for Crossfire or other modules on a FS-i6 will change the transmitter game.

@tanoryjakaperdana1419

5 жыл бұрын

Have you test this to i6? How about the latency?

@megahertz6787

2 жыл бұрын

So what about fsi6s

Man I doing this right now and could really use part 2!!

man what you are doing is just amazingly useful ! :D

Here we go again...another great video. Thank you. Is the board a finished product?

Awesome bro. Gonna get a module ordered up now lol

Cool! What is that piece you connected to the xm plus? I need one . Thx

top Vid man... I couldn't afford long range till I saw This! thanks dude. I got the Rm9 but how do I bind? just the normal way with the Flysky raido? I'm saveing up so mid next year for Qx7 that good but how can I bind receiver?

Can't wait for Crossfire! Would be a really great step for the flysky!

@LordGryllwotth

5 жыл бұрын

If crossfire can take PPM input, then it would be no problems. And R9M also takes PPM, binding and power settings can be done by the switches on the rear. One thing some people do: So you can insert a reciever (example a XM+) on the R9M and have a relay station.

@SeatFX

5 жыл бұрын

@@LordGryllwotth I'm also curious if RSSI would work

@LordGryllwotth

5 жыл бұрын

@@SeatFX oh. I cannot think about how telemetry/rssi would work. It's over my head.

@SeatFX

5 жыл бұрын

@@LordGryllwotth I also have no idea how that would work

@shatterpointgames

3 жыл бұрын

It's been done there's even a 3d print to mount the modules.

I'd love to see a latency comparison between this and an FrSky Q X7.

How cool! would this work with any other brands? What potential mods are there for the fs i6s? I have done the 2000mw signal booster and its amazing for the price.

can't wait for the range test

Awesome video! Works 👍

Hi waiting for part 2 bro. 😀😀

Crossfire with i6s please???

Could u measure the mW coming out of the transmitter as well as maybe the performance of the antenna and compare those to the frsky’s antenna and transmitter. I know u r going to do a range test, but doing these separate experiments as well as the range test would help I think, because they have fewer factors and chances for error

Hi! I did it yesterday. Its work fine. How to switch between two modules? I would like to use both modules with two receivers and i would like to choose between with a switch. Like Frsky Taranis x9e.

good job.i will try this..thanks for this video..very good video..👍

Thanks for the awesome video mate! I did the same thing and I got my crossfire powered up and bound with nano RX. However I don’t know how to configure the radio further, could you please help me out. Thanks a lot ! Cheers!!!!

You are awesome!! :D

You should make a video on how much more latency it adds

On the back of these transmitters, there's a circular DIN-plug, the trainer port. That can be used as an input to simulators, or connecting a trainer-transmitter. Doesn't this port also output PPM? Wouldn't it be possible to use this port instead of running the wires from the inside like you did? Seems neater, in my opinion.

Waiting for part 2

Will there ever gonna be a second part le this?

If i use frsky reciever Will I get frsky range and telemetry?+ can I do it on fs-i6s?

@Fpvfixit

4 жыл бұрын

:( saddly no

With this module, when it's bound does it count as one of your models on the screen?

What about telemetry data? Do we get it to show on transmitter's screen? Otherwise we will have to rely on OSD or a timer for line of sight flyin.

You should 3d print new backplate of the fs i6 with module bay

How do you bind the TBS crossfire from the other video to a receiver??

thanks' love it, wish I could afford it!

This is so awesome that your doing this...i debated on getting rid of the FlySky i6 controller and changing over to FrSky. But i learnt how to fly FPV on the I6. And yes even though its a cheap radio im attached to it. So if i can mod it to be multi protocol radio. Thats awesome brother...(Also keeps me from having to change everything FlySky reciever as well)..Highly appreciated you doing this tutorial and your time...much respect 😎 PS: i will be following your vids...but have no way to 3d print ...so ill be trying to mount it internally?

@DroneMesh

5 жыл бұрын

I have couple friends with printing service I can see if they can do them for good price.

@allennickles3970

5 жыл бұрын

Drone Mesh That would be awesome i would be up for a couple plus whatever you come up with on the crossfire module...thanks a million

Legend haha I've got two i6xs . Waiting for my nirvana to ship .

@tamarathompson9418

5 жыл бұрын

You didn't show you sniffing it out haha . That's always interesting.

Will this muilt prodacal work on a fs-i6s

Bro where do you find those wires,are they shipped with the module?Also can I with this mod bind to frsky lbt d16?

do you think my jr 9303 would work using this unit, there is a setting to ppm mode, of course there is a jr modual port.

is the multi protocol mod required to make the R9M mod work from part 2 thanks

Can i do this to my nirvana?the XJT will only let me bind one rx,and i have a few.

Did you find out for sure if this supports bayang?

If I am using TBS CROSSFIRE I does not need the multy protocol modul, right?

Hi, whats the different between this module and IRX4 Plus?

Can you share with me the circuit diagram of flysky? been googling for it but couldn't find one.

Couldn't you have just used the ppm signal from the port on the back. I am pretty sure the connection where you connect for simulators has a ground, ppm, and I believe a 5v as well. Would mean Les soldering and disassembly. Oh and will this work with the modded 14 ch firmware on the i6

Will it work with the flysky i6s?

i have a Q: when you boot up the FS-i6x with the module soldered on. won't it "on" also the flysky tx circuit ? so meaning that there are two circuits that are "on" . am i right ?

could this mod apply to elrs modules too? or the just don't work over ppm? And I with radios that are not CRSF capable..

We need help getting that beeper to work for low rssi and low battery alarm and timers. On the fsi6 . And great video I'm gonna do this instead of spending way too much for the jumper t16 .

@DroneMesh

4 жыл бұрын

X9-lite is 89 and it's my main driver.. Check my vids out on it

Can I use this module to convert an old Futaba radio to 2.4?

Is it possible to install ExpressLRS on flysky i6x?

Hi. I tried your method but the r9m won't bind just giving me red solid light. Is there a specific firmware to use on the r9m and flysky fs-i6x

Hello bro how can I make my holy stone 700d goes higher? Is there anything I need to buy?

Hey can I connect an ezuhf to this radio?

i have the blue one, nathan vertaile sent it to me it's absolute garbage been trying and searching how to update it for weeks have a usbasp now, but that is giving even more troubles i don't know how to solve i'll try to get this green one seems to work a lot easier does it also bind to flysky? why i wanted to install a multi module is, because i broke the internal one

Does this come with the wires?

Can I do the same for fs i6s model.?

Why does the i6x show that it can already do sbus? I tried binding it to a xm+ on that setting with no luck.

i fried my mainboard and broke the screen do u know if i can remove the rf module from the main board and use on a arduino i want to change the main board but use the original rf module

Will it work on turnigy tgy i6?

Whatt ? Godbless you dronemesh

Figure this out for the DJI FPV transmitter please

dose this flysky work with m2 rc helicopter?

how about crossfire on turnigy evolutiion???

Did you decide to come-up with this idea because the iRangerX iRX6 multi-protocol modulue is no longer available for the FlySky FS-i6(i6x) radios ?

Lo posso mettere comunque con la radio aggiornata a opentx?

This is a $40 module on a $40-50 transmitter. Can't it be cheaper? I mean, after all is said and done you still have a FSi6. You could buy one of those Jumper TS12 for this price and not have to mod it.

Mesh do you lose the ability to use flysky?

Does d8 work?

Will it work on fs tm 10

Why use the frsky module not the flysky?

I have flysky i6x.. To buy the module, i need to choose, wich model, JR/FLYSKY /or FRSKY? Thanks and keep your good work..

@DroneMesh

5 жыл бұрын

FRSKY

@DerMitDemMojito

4 жыл бұрын

@@DroneMesh why frsky??? Since it is a flysky Transmitter?!

Im desperate for a way to bind my Turnigy I6-S to ELRS. Had anyone done it? Thanks

Cant find the part 2 anyone have a link?

Hay bra is this the same as crossfire moduel

No entiendo porque no hiciste una segunda parte del vídeo o si es un fake porque yo lo he intentado con los mismo pasos y no funciona.

Ok so say you do this, but do it with the r9m module. How would you get Rssi on the osd. Would you have to use the analog rssi from the reciver? Or is there an easier method? I assume telemetry won’t work will it?

@EnggMohdRafe

5 жыл бұрын

George Downing Thanks I was also about to ask this.

@TheMadmacs

5 жыл бұрын

also switch assignment? without a screen? and diversity is pretty important?

@mece66

5 жыл бұрын

The rssi directly from the receiver is the easiest and most logical way isn't it? With upgraded firmware the xm+ has rssi on channel 16.

@georgedowning1803

5 жыл бұрын

mece66 yeah, looking online the R9 Slim appears to just have a analog rssi output that could be soldered up.

@EnggMohdRafe

5 жыл бұрын

I dont know whether r9m will work. waited for this but now thinking of ordering r9m and tranis.

Okay, good mod but where do you place the component?

@DroneMesh

5 жыл бұрын

go to thingiverse and search dronemesh.

Where is the "Part 2"? :)

After crossfire please consider doing wirh r9m.

will this work with Fs I6s??

@bradyrc818

5 жыл бұрын

nerdy hooligan - Bro same I want to know if it does cause I will mod it if it will work

Would I be able to do this with a spektrum transmitter??

@DroneMesh

5 жыл бұрын

I have no idea what TX model you have

@JJONESFPV

5 жыл бұрын

Drone Mesh I’ve got a DX8 gen 1

i have a FS-T6 and haven’t use it for years. Will this module work with FS-T6?

@DroneMesh

5 жыл бұрын

Maybe pop the back open and upload pic to dronemeshforum.com

@TomStGeorge

4 жыл бұрын

I'm tempted to try this with my FS-T6 - it guess it should work right? It has ppm

I'm using a deviation devo 7e mod with flysky. The firmware is open source and makes binding multiple models very easy.. sucks that you have to plug and hold buttons on the board

The module doesn't support diversity?

Can you make a vidieo whit flysky nirvana end crossfire please 👍 the other youtubers are not as good at showing it as you are

FSi6+TBS Crossfire, it's gonna be awesome🔥🚀✌🏼

@megahertz6787

2 жыл бұрын

Not awesome until fsi6s can do the same

I have done the firmware mod on my i6 and so can transmit in s.bus rather than I.bus. If i were to use the Frsky r9m module, is there a pad, that i could take the S.bus signal from, and use S.bus instead of ppm with the r9m. This way there you wont have the ppm latency and if you were to use the r9 mini receiver you can get rssi from a built in channel. Would this Work?

@DroneMesh

5 жыл бұрын

Cant answer until I receive my r9 module.

@georgedowning1803

5 жыл бұрын

Drone Mesh Would be really awesome if it did! I look forward to hearing any updates!

@achmadnofandi5148

5 жыл бұрын

What if i use "relay station" from rx fs-ia6b sbus port (this rx will bind to fs i6 tx as usual) do you thing this possible?

@georgedowning1803

5 жыл бұрын

Achmad Nofandi a relay station would add latency because you have to code and decode the signal twice. The only reason to use I.bus rather than ppm is because of the reduced latency.

You don't get rssi in OSD, do you ?

@sauerlandfpv5425

5 жыл бұрын

Osd rssi is based in the receiver

It will work with the frsky r9m?

@DroneMesh

5 жыл бұрын

Dont know yet but it works with TBS Crossfire.. I have the R9M on the way hopefully.

@yehonatanbellaiche9359

5 жыл бұрын

@@DroneMesh great! didn't see the video yet hope it work without latency. :)

@DroneMesh

5 жыл бұрын

You will not gain the low latency protocol it will be running in PPM mode.. But you get the range ;)

@Sergei75000

5 жыл бұрын

Drone Mesh Let us to know if frsky module R9m works on flysky i6

@DroneMesh

5 жыл бұрын

I will receive one in upcoming week

Hey what's up drone mesh my name is Ray Ray and I got a little thing called a d d i c c t e d - 2 d r o n z anyways I might be considerably older than you but you are my hero I idolize you in what all you can do with drone and fpv you are so no you are a genius I have mimic everything that I am able to do myself because I am on a fixed income I mimic everything you do I'm fixing to put the modem in my FlySky i6 cuz I have several mjx bugs series toy drones to the modem to Austin things for me just got to wait and save up to get it anyways my question is right now I bought my first field drone but it was already put together in the Box yks 250 with from the factory doors cc3d get to 1808 Motors and it came with the FlySky I6 controller I know all the cheap set up but I've got the case Co 3 fpv with the fatshark goggles that are actually donated to me woohoo LOL anyways man I'm looking to get range out of this but right now I can't even get it to come back on before it was like any other drone in and out you know that the sticks in and then out you can't start that like this now and it won't start at all I cannot get it to come on because when I received it I've only flown it one time I've had it almost a month and have flown it one fucking time I'm so pissed now one of the ESC Chaz went out why I don't know cuz I hadn't flown it and I've been having to fly my CD ass toys because I have to fly everyday I just went through a divorce because of my drone I love my drones anyway this is a long story I'm sorry look man I just want to let you know that I enjoy your videos as soon as I get some money I'm going to contribute to the channel promise I need to get a hat or shirt something how much are they about 20 bucks I got to do my module first but you take care of man keep them in the air you know I keep mine in the air every day if I don't working on it all night lying all day peace out

Did you try crossfire already? I mean do you know it works?

@DroneMesh

5 жыл бұрын

it does 100%

@mece66

5 жыл бұрын

Gentlemen, you had my curiosity… but now you have my attention.

There is ppm out in the "trainer port" on the back

@DroneMesh

5 жыл бұрын

Yes mentioned that on vid or did I edit that out?

@BuzZ.

5 жыл бұрын

@@DroneMesh no, when i started the video i wrote this comment, but you sad it somewhere in the middle of a video and i was like "yeaaaaa" 😂

DUUUUUDE PLZ ... CROSSFIRE PLZ!!!

Will it work on the flysky fs i6s

@jokez9351

3 жыл бұрын

Yes

@gaba2130

3 жыл бұрын

Will it work on turnigy tgy i6