The V400 makes a very high quality impression and is good value for money. I would buy the V400 again and again and recommend it to others.

Awesome video, just bought a second V400 and I have to say the Flsun V400 is impressive so far, the fastest printer I've ever seen.

Do you share your settings for PLA, and PETG?

Thank you for this new video... I hope you were able to solve the problem with the PLA - maybe it was wet?

@doitifyoucan9199

Жыл бұрын

Thank you very much, it's the PETG what's the problem is. It's not wet, all well dried... maybe something with the diameter its a very cheap one 0.1 € per Gramm, so we'll find out :)

🤣🤣🤣 Man - die Mutter hatte ja mehr Spiel auf dem Schraubengewinde als ein Toast im Toaster Platz hat. Wäre eine echte Kunst gewesen, das zu versauen. Hut ab an den Architekten dieses Kunstwerks - er ist ne echte Blindniete! Aber schön, den V400 in Aktion zu sehen. Oh - und wenn du schon ein Video aufnimmst: Level wenigstens richtig!

Hello I'm stranded between choosing 2v400s and 1 p1p or 2 p1ps and 1v400 what would you recommend,i plan on manufacturing lampshades for sell

@doitifyoucan9199

Жыл бұрын

for lampshades especially in a round shape we'll recommend the v400

One question, I need to print large format pieces where print quality doesn't matter much, but time is pressing, I'm between the elegoo neptune 3 max and this one. Bearing in mind that this one may require sectioning off larger pieces and waiting for the glue to dry when joining them, I'll still be able to get my pieces faster with this one than waiting for it to print in one piece in the elegoo even if it has a .8 mm extruder? Thanks in advance for your time

@doitifyoucan9199

Жыл бұрын

thanks for comment, what did you mean with "a .8 mm extruder? " ?

@blakanal7222

Жыл бұрын

You can put a 0,8 nozzle to the v400 as well. Or maybe even a super volcano with 1,2mm nozzle. I have the v400 purchased recently and plan to print in pieces as well and glue them together

@ulforcemegamon3094

Жыл бұрын

You can put a 0.8 nozzle to the FLSUNV400 so

What setting do you have set to 400mm/s? Inner wall/infill/outter wall speed??? Also what profile. I haven’t seen a clean PETG/fast print with the v400 and at such low temps . Looks like you have peaked at 220c

@antok86

Жыл бұрын

Also your clogging …have you checked your retraction settings. Try to shortly purge it at 250c to see if it will unclog

@doitifyoucan9199

Жыл бұрын

thank you for nice comment :) what you see printed in PETG at 400mm/s its the standard test models from flsun with their settings, you can load it in cura only temp is at 222 degrees celsius

@doitifyoucan9199

Жыл бұрын

@@antok86 i don't know exactly which retraction setting to choose its also every thing standard, it not perfect we know but in our opinion it works :)