nice set up i like the fact of the three way valve and one pump to do it all

Looks like an awesome kit! I found your channel a couple of months ago, your content is fantastic. I’m working on an old bass tracker pro17 right now. Thanks for all the info and ideas!

@HookedonHogs

4 жыл бұрын

DJ Jackson hey man I have a bass tracker pro17! Let me know how yours turns out

That's freaking awesome

That is genius to use that Brute tote, instead of an actual plastic livewell🤔 I was going to buy one for my build but I might do this.

This information is invaluable.

I would love to see you do some ideas on how to stabilize smaller the v Hull boats, like the kapten boat koller.. great idea from down under but way too expensive in the States shipping alone is like $700 thanks for all you do,,

You are so dope doing this man I have not seen anyone else go so into depth on explaining the process you use for these tiny boats . Just so I know how much would it cost to turn a job boat into a tiny boat

Hi Mike awesome modifications to Jon boats you and the tb nation give them the respect they deserve. I don’t ever comment. I’ve noticed some people comment about the foam issue in your modifications. Idk if you know that for every cubic ft of foam (12”x12”x12”) you get 62.38lbs of floatation. I highly recommend A/B foam because it’s USCG approved. If you want to be within the regulations for safety, you have to know the weight of the boat, outboard, and gas, first. Then figure how much gear and people weight is going to be onboard. Then you can put the correct amount of foam (62.38lbs) so if you put 8 cubic ft of foam that’s 499lbs of floatation (8x62.38=499). If you want a boat to pass USCG floatation regulation you get the empty boat no motors, batteries, gas, gear, ext. put it in the shallow water or a pool pull the plug let the boat fill to the top and it has to stay up kind of level for 18 hours without sinking completely. This is how boat companies get capacity weight on the boat and almost all companies over foam the boat knowing most likely average Joe is going to exceed the capacity. All for your tb nation info. Thanks

Awesome video man! Wow you sure do say invaluable a lot! 😂😂😂

Flow rite been in my boat for 18 years and still working except if you need one part ansd have to pay over $20 for shipping working direct with them

Great video man. Step up your game and always use heat shrinks on your electrical . It is a must.

@schism420420

3 жыл бұрын

@@TinyBoatNation I guess I must have blinked my eyes when you were shrinking

I’m glad this video appeared in my feed. Straight motivation. New subscriber and love your amazon store

Wow. This kid is insane dude.

It’s invaluable

Sweet unit mate great vid cheers

Many thanks for he video. So the black wire from livewell pump does not go to the flow rite ground on switch?

Actually, in the AUTO position, water is drawn from both the livewell and the transom. It's a mix. When you are on plane, it will "automatically" only draw from the livewell and then return to drawing fresh when off plane.

Hi Mike , I have been watching your Builds and LOVE HOW YOU Have done them . But, I have gotten totally lost on where to start. Can I give you my boat so you can showcase your skills .. I am an older gent that FINALLY have gotten a boat for weekend fishing with my grands.... I not looking for an extensive build . I would be satisfied with whatever you do.. Just something that would STAY AFLOAT for WEEKEND OF FUUN WITH THEM....

All in all, not a bad video. It moves a little quickly in a few spots, but not impossible to follow. It was a bit difficult for me to keep track of where I was looking on the boat. Its hard to tell on a tight shot. Might be better if some of the shots start wider, then zoom in. A couple things I would have changed would have been to use 5200 or 4200 on the fittings instead of silicone (which is not permanent in water); and I would have moved the switches for the livewell somewhere else where water could not slop out and short them out. There are other livewell kits which automatically switch from circulate to recirculate when the boat comes up on plane. Those are nice because one does not have to remember to switch the valve every time one moves, then switch it back after the boat stops. They also have timers so they are set and forget. They come on and off by themselves every few minutes (depending on where one sets it).

Dude you are the man. Do you charge to custom build Jon Boats?

what kinda budgit would i be looking at to get a jon boat and decking it all out like you do ? or do you guys do it ?new sub not fully up to date on what you guys do live in pa wanted to do this for a while but not to this extent but the more i watch the more i want to do

“barbed” is how the hoses attache to the fitting. the quick connect is a different example of how the hose attaches to the fitting. barbed doesn’t mean 90. you can have threaded fittings too.

@gr8jpn

4 жыл бұрын

I was laughing at his "in the boat world it means elbow..." Nope barbed is the type of fitting has nothing to do with elbow or not.

@williamwallum1236

Жыл бұрын

Yeah. That was driving me nuts.

@duraluminum

Жыл бұрын

"Barbed" means it has barbs or ridges on the fitting....like the "barb" on a fish hook.

Where are you located out of I would love to learn how to do this

Rather than sealing the voids with a can foam where you don't want the expanding foam escape... use bathroom caulk its probably cheaper and easier to seal the small gaps. might be a bit messy but probably seal better

where do I get the low profile drain on your live well < I looked on your amazon store and couldn't find the one you show in the video , the one with the four grooves in it?

I wish you where here to help me out with mine boat

How much are those kits?

both of those links to the kit say they're broken

The link to the kit appears to be broken for me, is there an updated link?

How many gallons is the tote you are using from Brute?

That screen/strainer is very similar to the ones uesd by graco paint sprayers..

I reached out to Bobby and haven't heard back. Could you holler at him for me Mike? I'm sort of new to boating all together. I don't have a lot of time to spend researching parts, it would be really nice/super convenient if I could get the whole set up in one purchased kit. ( I came up on a 15' Gregor, and the first thing I'm doing is a livewell.) Love your work Mike, thanks for all the videos!

@reggaecutter

4 жыл бұрын

@@TinyBoatNation Right on Mike! Thanks for looking into it!

@Brianaddeo87z28

4 жыл бұрын

Danny hey Danny we will be back Monday! Send me a msg @briansmarine on Facebook

@reggaecutter

4 жыл бұрын

@@Brianaddeo87z28 Hey Bobby. So I don't have Facebook... Is there an alternate way??

Shoe store on Amazon called

On a boat with 2 livewells do you need to have separate pumps and all or can you link them together?

@whancock868

2 жыл бұрын

I've been wondering the same thing

can you do a video with a cooler and livewell together

@Bigbenfishing

4 жыл бұрын

Tiny Boat Nation awesome thanks! I like how you do the quick connect system. So simple and easy. I was planning on doing my cooler/livewell on the side and but close to the back on a 1648

I have a 25' offshore boat with a transom livewell, can the flowrite valve be mounted vertically instead of horizontally?

@Eluderatnight

2 жыл бұрын

It doesn't know which direction it is. May have a harder time with initial priming.

how would I do this if I have a Ranger 372v that has a livewell in the front and rear? Would I need an adaptor at the Tru-Hull to go to the 2nd livewell with another system?

@TinyBoatNation

Жыл бұрын

I have no idea

Link to the brute box you used?

@Big_Ballz1983

4 жыл бұрын

Tiny Boat Nation not in your store. The ones at Lowe’s have handles on the side that I don’t see on yours?

I'm wanting to know how much rock salt to mix with 25 gallons of water for herring bait ?

@TinyBoatNation

2 жыл бұрын

I have no idea.

Is that considered a flow-rite system 3 or system 4?

@paul.aragon

3 жыл бұрын

@@TinyBoatNation , ok, because on your TBN site, one of the pictures states it is a system 4 pro kit with timer plus. Is that different than what is on this boat in the video?

Hello do you have a complete parts list for this setup. also do you have a parts kit to build this thanks.

@TinyBoatNation

Жыл бұрын

It’s on our website TBNation.net

@Frogcreek1938

Жыл бұрын

@@TinyBoatNation thank you looks like a awesome setup!

I am trying to locate the pump out valve. Any idea where to find one? Looked on your amazon link and saw everything but that...

Aren't you afraid that thin of metal will not hold up? seems like just someone accidently kicking it would damage it.

Is it that hard to say the word "recirculating" ? LMAO !!!!!!!!!!!!!!

Great video! What is the part number of the Flo--Rite kit? What other water flow related items that are not in the kit do I need to order?

@TinyBoatNation

2 жыл бұрын

It's on our website TBNation.net. search flow rite

Rushing the hell out of the demo slow down a lil.

Sry dude but it is run and run and run

Geez this whole video is demonstrating the wrong way and instructing viewer to do it the right way? The ultimate do as I say and not as I do. Sorry this video fails... you are basically losing credibility.

@gr8jpn

4 жыл бұрын

@@TinyBoatNation Go back and watch your own video and count up the number of "modifications" you did and instructed others to do it different. Geez

@markgibbon5043

4 жыл бұрын

@@gr8jpn i would love to watch your version of a complete build............oh wait you don't even have a youtube channel.

MEN I CAN FINISH YOU VIDEOS YOU TALK TO MUCH BACK AND FOR