Just found this video. This is first one I've found that clearly states that the jack needs to be clear to move under the load. Very clear presentation. Excellent stuff.

Excellent uncluttered clear statements & directions with precise locations

What a beautiful, careful but unpretentious video. Thank you so much!

Great video. Clear instructions and to the point.

You're a really useful web video; could not make it without ya!

this is a fantastic video, so deatailed, thank you.

Good job and very well explained. Thanks!

@RicardoGarcia-jv7lt

4 жыл бұрын

Excellent. Safety first!!!

Good job! Very helpful.

Thanks from Texas.

EXCELLENT VIDEO!!!

Thanks you for the good way how to use the jack ans jack stands

Excellent. Safety first!!

I will be changing the oil pan soon..first time, easy job. I wonder if this jack and stand positions are the best for this kind of job under an suv ! please advise.

That's an amazing shop you have

@MrAdkinsAuto

6 жыл бұрын

Thank you!

@fox10169

6 жыл бұрын

MrAdkinsAuto no problem, bud! It just looks so clean, and well organized. I would kill for a shop like that !

@MrAdkinsAuto

6 жыл бұрын

Fox yes, it is really nice but a lot of work and high expectations from higher up. Where do you work/teach at?

@fox10169

6 жыл бұрын

MrAdkinsAuto Orlando, Fl. I build mostly Subarus and do odd repair jobs on the side. I don't have a shop though, sadly. Working on it though !

Does my Jeep have the same factory jack point?

Great video. I'm sorta new to auto DIY, so this was super helpful. If I'm jacking up to change oil, do I also have to put two more jack stands in the back to level the car. It would seem the oil might not totally drain if the car was not level (like on a lift). Thanks.

Can place the jack stand under the tow hooks is that ok ?

Very informative video. I really appreciate that. I would to know where did you that rechargeable light to work underneath your car. For someone in the UK.

@MrAdkinsAuto

3 жыл бұрын

The light is from Blue Point (aka SnapOn). It is a rechargeable LED tube light that has a extendable bracket to hook under hoods. I have had it for many years and really like it. This is a similar version but it is not cordless like mine: www.snapon-bluepoint.com.sg/category/Lighting/product/168-LED-Under-Hood-Light

I knew how to do I just wanted to see how you did it, everybody has their own method of doing it> I'm an old backyard mackinac and for changing a tire I do it differently

You caulk the back wheels, so it wouldn't roll backwards. But once you raised the front wheels, what's to keep the car from rolling forward? I would have caulk one rear wheel front and back.

Thanks

A 2011 dodge journey...where to place the jack?

When buying a floor jack what do you recommend I buy? Autozone has something that is $69 and Walmart has a floor jack that is $130. I don't want to overpay for a carjack, but I also want something that is quality.

@milburn69

4 жыл бұрын

Quality is costly I guess $130 sounds about right for a good car jack

@chien-shengtsai8626

Жыл бұрын

You get what you pay for. Check Project Farm reviews.

Since you had a mfr lift point at the front of the vehicle (at center), why not use the crimp points designed by the mfr for lifting (it's reinforced), and it is also where shops with dual post lifts place their arms for raising the vehicle. The jacks are then farther apart, and out of the way, with more room to work under the car. I also would not rely on a pair of stands. For safety, add a second pair of stands, also leave the hydraulic jack in position under the car, and toss your wheels you removed under the car. They are better placed here than against a wall serving no useful purpose. Go with over rated jack stands (instead of 3 ton, go for the 6 ton....safer). The pin designs are better than ratchet style for safety. I use 7 ton stands, and the pins are 1 inch thick.... the same used as on the 22 ton stands. kzread.info/dash/bejne/hZN7xNxym5jdd5s.html

What is the brand of the floor jack you are using?

@MrAdkinsAuto

5 жыл бұрын

It's a Blue Point (SnapOn Brand). Nothing special about it other than being a bit over priced. I just like the handle on it for students learning for the first time.

@technics8047

3 жыл бұрын

My car is stored in my garage and the rear end is close to the back wall and needs to stay in it’s present location. Can I use the floor jack from the side of the car to lift the rear portion of the car?

Good information.I still am not clear on what the problem was that required you to readjust the one jackstand.I wish you could have held up a drawing showing what the issue was.

@toddh6234

5 жыл бұрын

The car wasn't sitting on center of the jack stand so he adjusted.

@xpmark1

5 жыл бұрын

Thanks, I think I finally noticed that myself.Now I am clear.

With the way cars are made today much of the car undercarriage is subject to being bent cracked by using floor jacks..

That jack can lift a Truck lol.

It would be safer if you put jack stands from the side as opposed to the front.

@kennethadkins3335

6 жыл бұрын

the jack stands need to go on solid steel. The pinch weld or sub frame will generally bend or be damaged unless specific stands are used that are wide enough support the pinch weld without crushing it. Engine cradle or control arms are much more durable.

@KennTodd117

5 жыл бұрын

How do you identify correct placement? Great video

What if you don’t get the option for concrete? : /

@saysomething2995

4 жыл бұрын

Don't do it. Always do work on concrete. Gravel and dirt isn't safe. Some people take chances with jacking up their car on gravel and dirt. It isn't worth it;especially if you're getting under the car. Play it safe.

@alfredv9902

2 жыл бұрын

If no concrete floor, than place jack stands on plywood (and go with the stands with wide flat base). Also, you need a sheet of plywood for the jack itself (with 1/8 inch sheet metal attached to top of it) for the jack front wheels to smoothly roll like on concrete.

you'll benefit from getting your audio together-it sucks

What a tripper Ford car that doesn't even have engine protection is a complete

You forgot to set the parking brake genius

@MrAdkinsAuto

5 жыл бұрын

I do not like to use or rely on the parking brake when jacking up a vehicle. Reason is: if the owner never uses the parking brake then it may become permanently stuck on once it is applied. Using quality wheel chocks is much better and more reliable than the parking brake. Hope this clears things up.

@topgunns1000

5 жыл бұрын

@@MrAdkinsAuto eskine is being an ass. Don't even bother trying to be nice to him in your response.

@wvadam

4 жыл бұрын

As he said, relying on a customers rusty old parking brake working properly can get you killed, genius.