It's really beautiful to watch this being made. Very satisfying. I'm still learning gis and have made thematic maps. However, putting them together like this is more complex analysis. Seeing this video kind of gives me the AHA! feeling of "this is what can really be done ultimately, once I master the basics."

Your video is really good. Very much helpful.

THANK YOU FOR SAVING MY THESIS!

Sir very good, very Nice and informative video, in short time you solve many problems۔۔۔ We pray to Allah that it becomes easier for you and for us too.

Very informative, thank you for sharing. I have a question. I really want to know how landuse map was prepared. were the FID values you used numbered according to the classes? Same with precipitation, did the FID you used had value of precipitation? I used your video. Some high altitude areas are showing flooding

Thank you so much so beautifully explained

Hi, please, tell me where to get the layer "land cover"?, Thanks

Very informative, thank you for sharing the knowledge. Question: Which reference materials did you use for the methodology or how did you determine the weight values for the input parameters? Thank you very much for your response in advance

, تحياتي لك يا مبدع 💙

@AFG GIS , can you please tell me what software is this? arc gis or qgis

Hi sir, Thank you for your good video. Can I ask you a question please? What kind of information did you include in Land use/land cover file for flood hazard mapping?

Der kha ror

What is meant by precipitation "levels"? the precipitation raster in your video shows 1,2,3,4,5, do these number correspond to ranges to precipitation?

@afggis2822

2 жыл бұрын

thanks dear ...it is annual preipitation level shapefile ...when you download it in .csv format you must do some process and change it to shapefile..an in my tutrial it is precipitation level of a country an after i clip it in province limit. thanks

@omkavitake4013

Жыл бұрын

@@afggis2822 From where I will download the precipitation level shapefile?? & What is the process to change into shapefile?

Very good video, could you please send me the detailed instructions for the flood susceptibility map through ArcGIS. I am requesting this for learning and research purposes. Thank you in advance.

How can i calculate the area of different flood susceptibility classes under different district in a flood susceptibility map?

Hi, This is good work, thank you for creating this video. Can you please share the paper you referenced for methodology and detailed instruction?

Hello , How can I calculate the area of different hazard zones ??

Hi! This video is quite good and helpful. I would just like to ask if you can also send me a detailed instruction of this tutorial? Thanks!

how can i prepare precipitation map ? thanks

Hello, Sir. Great vid. Could you send me a detailed instruction on how to do this? Thank you.

Nice video, pls where did u download your precipitation data

Please tell me what primary sources you used when creating your presentation (books, articles and other sources) ??

Hi sir. Thank you for your video. Could you please send me the detailed instructions about flood susceptibility mapping through Arc-Gis? I'm looking forward to hearing from you. Best regards

Hello Sir , Please all send video of how make different datasets that are used in Flood mapping. that would be really helpful

Nice information and knowledge! Greeting from Indonesia 🙂 I am curious in 15:40, there are some values to be input as sum overlay. Where do these values come from? are the values may apply to any areas? Because when I add this value and I have finished the flood mapping, most areas in my downstream / outlet were marked as very high zone.. almost 80&%... Thankyou. Best Regard

@afggis2822

2 жыл бұрын

thanks dear ....this value is conistant for flood, this values is prefer according to importance of layer ...and also you can use AHP method for your location ... if you have another question i will help you .. best regard

@user-vv2vk7lj4w

2 ай бұрын

good

Why weighted sum failed at arema?

Hi sir can I get the paper explaining methodology for the video ?

Hello. Nice video. Can you please send me the instructions for creating the map. Thanks.

Which precipitation data you have used and for how long(time period) ?

@mohamedelgamal6333

Жыл бұрын

In such cases, the common practice is to use the mean annual values (mm/year)

Hello, great video! Could you send me a paper which includes the used methology? That would be great.

How can we access the working file

Good Day. Can you send me detailed instructions on creating flood hazard map. Thank you

Hi. the steps was great but with errors in details. you just made the landuse and precipitation raster based on ID field !!! so the reclassified raster is just based on ID values of precipitation and landuse and had nothing to do with flooding. But still is a great video showing the steps of how to finding high and low risk areas in any situation by related raster layers. thank you.

I am facing problem when executing fill option at the start, how i can solve it?

Can you give the reference paper of this classification? From where did you take the weighted values or based on what?

Hi, May I know the value you get at 15.40?

hye sir, where did you ge the value of weight for each layer at the weighted sum process?

@mohamedelgamal6333

Жыл бұрын

Dear Sister Amira, Alsalamu Alikum. The method presented follows the concept of multi-criteria analysis where the most dominant criteria are selected first then the weighting of each criterion is selected to reflect the importance of each criterion to the studied item (which is the flood risk here). Accordingly, the designer can select the weights that he/she thinks it is correct. One common practice is to assume equal weighting to each criterion i.e. 100/7 (in this application). The other common practice is also to select the most dominant factors and to give them higher weightings. In order to agree upon the weightings of each criterion, some researchers used to ask this question to a number of participants (at least three) and to ask them to put the weightings that they think they are realistic and to then to use the average of the selection of all participants (but make sure that the sum of the weightings is 100%). Another way is to stick to a selected weighting scheme that you think it is fair then to carry out the flood risk mapping then to discuss the effect of changing the initial weighting scheme by say 10-20% on the result.

Hello sir i need your help i want to learn about creating flood susceptibility mapping using arc gis...could you please share me

AoA sir, i need a detailed instructions for the flood hazard map as currently i am working on my fyp project regarding flood hazard mapping. can you plz help me sir?

I am in need to het the layers you used to make map for...Kindly share me or give me the drive link of these layers ..e.g. lulc,slope, precipitation..kindly ...please share me .i want to do practice on it

Hello Sir, This video is very useful for my case study... Can u please send me the researchpaper

Hi. Thank you for your video; could you please send me instructions and explain each step in greater detail? I'm looking forward to hearing from you. Best regards

@afggis2822

2 жыл бұрын

ok dear thanks a lot for your supporting us. Dear please write your email address to i will send you full instruction about flood hazard mapping.

@IngridHastings

2 жыл бұрын

@@afggis2822 Hi there and thank you for this video! Could I have this information as well?

@mimach3088

Жыл бұрын

Can you send me the détails please

@benjamintwum7597

Жыл бұрын

Please can send me the details

Hi mr. Could you send me a detailed instruction on how to do this thank you❤️

@afggis2822

2 жыл бұрын

plese send your email address

@marymaerubin6594

2 жыл бұрын

@@afggis2822 can I have it too?

Dear Eng. mohammad Ashoor Aman, Please tell me what primary sources you used when creating your presentation (books, articles and other sources)? I need references. Please send them to me.

@afggis2822

11 ай бұрын

I attached a file in your email.

how to download the NAT precipitation shep file ?

@afggis2822

2 жыл бұрын

you can download precipitation data from USGS ,NASA climate data ,world climate data...and etc website ...in next video i create video about how to download diffrent data from web .. thanks

@ranabala2476

2 жыл бұрын

@@afggis2822 thank you

Hello, great video! I am following along but I get an error when I go to do the Stream to Feature. When I input my conditional layer, it gives me an error for the input stream raster (conditional stream raster done in the previous part) saying the input is not within the defined domain and the input raster is not integer type. Do you know why this may be? In the video I'm at 5:30 Thanks!

@afggis2822

2 жыл бұрын

thanks dear for your watching. if you give error , 1.you can covert raster to poly line in conversion tools. 2.before conditional value you can also ..use stream to feature and after that analys and use slect by attribute ...grid code =9 grid code = 8 grid code =7 if you have another problem i will instruct you more.. thanks

@cantaloupe7296

2 жыл бұрын

In the Stream to Feature tool, the input stream raster needs to be integer type but if you look at at con tool output, you'll see the values are probably floats. this is because the 'true' raster you used in the con tool was the fill tool output which is also a floating raster. My solution was to to input the con output into the Int tool to get a the same raster but with integers values. then i used this as my input stream raster for the Stream to Feature tool.

Sir can you mail me the paper that you've referred in this tutorial, it will be really helpful

hello can you send all the layers of this map

@afggis2822

2 жыл бұрын

which layer dear.. you can download your desire layer from USGS website.

Hi, could you send me the paper with the methodology, thanks

@afggis2822

2 жыл бұрын

how can i send you ? by email

How to get a PowerPoint explanation please

@afggis2822

11 ай бұрын

what is your email address.

please provide the pdf( word document )

سلام محترم تشکر از این همه ویدیو زیبا تان. من بعضی از دیتا ها را ضرورت دارم که شما انها را دارید اگر لطف کنید که در اختیار من قرار دهید. تشکر

كيفية الحصول على شرح بوربوينت رجاءا

Dear sir. Very grateful video. Thank you. Could you provide me a full tutorial of this method? Please give your email.

hello please reply

Sir, can I get the whole paper through mail

@afggis2822

2 жыл бұрын

yeah dear ...what is your email address

@chaithanyap486

2 жыл бұрын

@@afggis2822 thank you sir

@himanshusingh6786

Жыл бұрын

thank you for the video,❤️ I also want the paper

@mimach3088

Жыл бұрын

@Chaithanya P Can you send me the paper please

SIL VOUS PLAIT over lay sam comment je peux le faire

سلام‌ ان‌شاءالله که خوب و صحتمند باشید ویدیو تان را د یوتیوب دیدم‌خیلی ویدیو موثر بود من محصل سمستر اخر ماستری در رشته landscape architecture هستم و می خواهم‌برای پروژه فاینل خود Flood hazard mapping را انجام‌بدم‌ اما نیاز به داتا دارم اگر لطف کنی و شیپ فایل هاییکه از ولایت‌هرات و یا از افغانستان داری را با من شریک‌کنی که من بتانم‌ این‌کار را برای پروژه خود انجام بدهم سپاسگذارتان‌می شوم تشکر بسیار زیاد

@masumahosaini8681

Жыл бұрын

Salam I hope you are doing well! I found this video in youtube abd it was really helpful. I am a student of the final semester in master of landscape architecture. I want to do flood hazard mapping by GIS for my final project, but for doing so I need shape file if you can help me and share with me the shape file that you have that would be great. Regards, Your sister from Herat Afghanistan

But too fast....need to moderate slow for the learners...

Hi sir. Thank you for your video. Could you please send me the detailed instructions about flood susceptibility mapping through Arc-Gis? I'm looking forward to hearing from you. Best regards

@afggis2822

2 жыл бұрын

yes dear ..what is your email adress

@swatigupta5694

2 жыл бұрын

@@afggis2822 Helo Sir, I too need the detailed instruction for the same. Please share .