Enter to win our Yamaha Banshee and support the channel here! www.grindhardplumbingco.com

@DawsonTyson

2 жыл бұрын

The "Jackery Solar Generator" wouldn't survive a massive solar event. Just saying. 😏

@wolfslair9000

2 жыл бұрын

Cash the brass that will really help you guys good luck keep up the awesome job.

@rsharney1111

2 жыл бұрын

Love the drone shot intro. But with as bad ass as you guys are, you should have an Fpv guy do it. It looks more organic and has the ability to flow through your property (even your shop).

@brentdenholm668

2 жыл бұрын

@@wolfslair9000 my thoughts exactly or would look cool polished up and re used somewhere on the truck

@ReadMichaelParenti

2 жыл бұрын

Best cinematography yet guys! Steven is awesome!

One bit of advice from a man with a flat bed truck and ramps: *Do everything in your power to make those ramps as long as you possibly can!*

@justicemorgret5222

2 жыл бұрын

True but at the same time if you have enough weight one then they can flex but at the same time short ramps are steep so I’m order to have long ramps make sure they are built well like try and find ramps off a old skidsteer trailer or heavy equipment trailer👍

@whateveritsmeshorts4460

2 жыл бұрын

Hi deucg if ghg goalkeepers talisman

@AndyKPOV

2 жыл бұрын

Them 3.5-4 foot never do justice...

@saffronalarm3134

Жыл бұрын

That would be premium

@punk46664

7 ай бұрын

Earthmoving ramps, preferably split ones

a really good idea would be to take the PTO from the pump and turn that into a generator to power tools and outlets and such. not to mention it would be great for a power outage if you needed to run your house off of it. Edit: there's also a lot of other PTO options you could do, winch, snow plow/ snowblower, all kinds of stuff. hell PTO 4WD could've useful

Cool PowerWheels toy hauler. Hang a LS low between the frame rails to minimize top heaviness.The ramps need to be twice as long. The hauler needs a generator & air compressor onboard. How about a winch crane off the rear corner you could use the heavy scrap pipe from the fire truck.

@geoffrey6000

2 жыл бұрын

also needs a welding machine etc. But i think a big diesel would be much more practical and reliable.

@bashr52

2 жыл бұрын

12 valve would be perfect for this. Being all mechanical all you need to do it get it started and then never have to worry about being stranded with a dead battery!

@cloakdaggercustoms3903

2 жыл бұрын

@@bashr52 I'd go with something a bit bigger. Like an old CAT engine or an IH DT466. Still all mechanical but a bigger engine made for semi trucks and fire trucks.

@cheerdiver

2 жыл бұрын

I don't get it, would be a natural for a hydraulic setup. In addition, a POWER PLANT could be run off the PTO. ie large welder Go radical get a modern low speed hydraulic FRONT WHEEL DRIVE, update the front end at the same time.

@dw600

2 жыл бұрын

I’d say go 12 valve with enough mods to run compounds for towing with a hater pipe coming out the side like the Camaro easy to attach compressor to motor and even a hydraulic pump if needed 12 valves are versatile plenty of room to work on a 12 valve In that fire truck

You have the space to work on this in the new shed, I'd love to see progress on this build. And my 4yo boy demands firetruck in the snow every time I'm watching any of you're videos, so I'd love to watch the new one with him.

Might want to consider making two piece ramps that form an arch, with adjustable supports in the center of the ramps. Straight ramps to a bed that tall is just asking for loading/unloading trouble.

24:30 Yes He's a LEGEND. Ethan thinks a completely different way about things than I ever would. And I'm pretty keen on ingenuity. That's why I love these videos. Craftsmanship hands down is the best on youtube.

@GrindHardPlumbingCo

2 жыл бұрын

Thanks man! Really appreciate that!

I CANT WAIT TO SEE THIS THING GET A FULL MAKEOVER WITH THE NEW SHOP!!! SO EXCITED FOR ALL THE NEW PROJECTS!!!!

You guys should add air bags in the rear so the ramps don’t have to be as tall

@GrindHardPlumbingCo

2 жыл бұрын

That would be so cool!

@Lucas12v

2 жыл бұрын

And it will ride better because it's going to be way too stiff after the weight reduction.

@UmmmmmmmWhat

2 жыл бұрын

The same bags that make a city bus squat would probably work, maybe you can find some online.

@apexalaska

2 жыл бұрын

Or take it way crazy and do a four link setup with airbags like the Diesel Brothers did to that deuce and half.

@jaxonmiller691

2 жыл бұрын

Yes this needs to happen

i would love more content on this build

i don't know if you read it the first time but i'll try again. Consider making a "two story" bed with the sides over the wheel wells for wider vehicles and a lower "lane" in the middle for the smaller vehicles like karts and stuff. you could fit more vehicles by using the space between the wheels and below the other bigger vehicles

Canada here...one word playa'... Awesome!! Keep turning that wrench... one love

you could use the pto shaft that used to power the pump to put a generator to have electricity

@trillrifaxegrindor4411

2 жыл бұрын

and a battery to store it

Dt466 with an auto out of a 1987 international s1600 would be perfect. Loads of power easily modified like a 12 valve Cummins and you can normally find just the front half of one for fairly cheap. A lot of them were dump trucks/grain haulers. So people trashed the rear frame sections with overloading.

@lavasiouxwindwater9789

2 жыл бұрын

DT466! My favorite! Got a 93 Firetruck :)

Hey guys just wanted to say awesome job on the channel and all the builds. That beach run you did recently was the most coolest place to take your toys to, looked alot of fun. Can't wait to see how this fire truck toy hauler turns out, I can visualise it finished already. Once again awesome builds guys, best channel online, stay well. Ad from Oz. 🇦🇺🙃👎p.s. If ii win the Banshi will their be and issue with delivery...lol

@onlygaming69

2 жыл бұрын

I feel like ik u that name firmila

There is no reason that you can't win them all! And with your ingenuity you have better odds than most!!

I'm doing an 80 Ford C8000 tanker and switched 255/70-22.5 tires to get the bed height down a lot. Thank you I've been waiting on this build

Imagine the blueprints, time and expense that went into building this monster originally. What a nice hauler it'll be.

I appreciate the realistic angles of the work being done. Its hard, its being up all night, its cold, its a struggle. We all know that its not the pretty slo-mo in real life and to get snippits of how hard you guys actually grind is great to see. Physically and figuratively. Good job guys. Btw, you gotta have the coolest girlfriends/wives for them to be like "okay honey, have fun at work today." Knowing youre going to do this lmao.

I used to work on fire pumps, 1200 gpm is A LOT more water in person than I ever imagined in my minds eye. I’d run 750 gpm electric and diesel driven pumps and it would turn a parking lot into a lake!

I like the xylophone music and more candid photography. The things captured more behind the scenes like hooking the forks on the bobcat were nice to see.

I know everybody is harping on about ramps… but have you thought of a swing out winch arm or a hi - ab style situation? I absolutely love your builds and I know this one is going to be ridiculous, can’t wait to watch it unfold. Thanks for being an inspiration to build fun overkill things!

I’d personally 12valve swap. But move the engine as far forward as possible and convert that back area to seating/camping space

This Channel is the definition of work smarter not harder

Watching your video when the wife walks buy, "those guys sound like you." I was pleased to see you live in Idaho, I grew up in Southern Idaho near Twin Falls, now residing in Arkansas for the past 40 years. 😎

You guys should include a 5 wheel hitch. If you ever want to tow a trailer

@owendodman3037

2 жыл бұрын

I'd go for a goose neck, much more readily available on flat deck trailers

@IeeIee778

Жыл бұрын

@@owendodman3037 both

Without a doubt. Ethan is a legend. The creator of gas powerd power wheels.

That level/speed square idea was badass!

Ethan is a LEGEND.

You just have to keep the original engine and make it run decent if that's possible, because it just sounds so amazing!

@danw1955

2 жыл бұрын

They sound great, but they only get about 4 miles to the gallon of gas, loaded or unloaded, so they're going to need something newer and preferably fuel injected if they want to drive it more than 10 miles at a time!😉

Would be cool to have a side load option also. You could fit more power wheels.

Holy rusted metal batman! Actual plumbing parts!!!

You guys are the true proof that men newer grew up and that it's just the size of their toys that increases. That's so awesome! 😃👍

you should use the clutch that is connected to the fire truck water pump and attach alternators converting it into a mobile high powered generator

@tstricklin4808

2 жыл бұрын

And or a pto for a wench

I like how they take apart the firetruck right after one of their projects catches on fire. 😂

I think this is my favourite video so far, the editing style, music, the shooting and actual shots. chiefs kiss* the content combined with the editing was absolutely amazing good job everyone :)

There's a guy in PR with a school bus he put a flatbed on, and gave a mystery machine paint job, and he hauls his matching VW van that's his wheeler...it's pretty epic lol

This is going to be a sweet toy hauler!! Needs a Cummins/ Allison swap🤙

@GrindHardPlumbingCo

2 жыл бұрын

It really does!

@haroldphipps3457

2 жыл бұрын

@@GrindHardPlumbingCo an 8.3 Cummins! Not a 6BT!

Those fire trucks were properly made . 🚒🚒

Your a legend bud don't let nobody tell you wrong

HOPE TO WIN THAT (BANSHEE )JUST GOT MY HOODIE IN THE MAIL TODAY

You know for a fact that if you were to attempt unbolting every other bolt head would round off, and bolt shafts would snap. For the ones that did want to come out, it would take at least 69 metric ugga duggas to pop them loose.

@thomasevans3097

2 жыл бұрын

Project Binky follower?

Here I come again to enjoy my eyes with the built 😍

Going to be a great power wheels hauler. Can't wait to see the finished build and after Ethan works his magic.

Hey for a motor and transmission swap in that thing I think you should simply go and try to find the drive train out of a 25 or 3500 Dodge ram the motor and transmission combo will make plenty of power enough to drag that thing around and it will be more reliable and simple to work on the most any other thing

@AccAkut1987

2 жыл бұрын

They've already said they probably go down the Cummins route

@YouTubeneedstostopcensoring

2 жыл бұрын

@The Gator Bandit why? Everyone knows the 68rfe is the best trans you can get? Ram literally already mated the Cummins with the goat of transmissions. Everything else will be a downgrade.

@diyspeed

2 жыл бұрын

Gonna want to do a dodge delete on that 12 valve before it catches fire 🔥

A Detroit 2 stroke diesel would be an interesting option, there's a couple KZread channels I watch that specialize in that engine.

You guys always suprise me and your ingenuity and respect to old engineering makes for some amazing work!

Awesome guys, i really appreciate this channel thanks for all your hard work!

y'll need to see if you can get any help from power driven diesel, banks power or any other company for a lot of horsepower and torque in a reliable engine!

You should have just used the water tanks for extra gas on trips

13:40 realest thing ever was wearing saftey goggles and got a chuck of metal in my stared to rust had to see an eye doctor dont mess around with grinders people

I knew you’d do a build with that baby. I’m stoked

You gonna have all the local tweakers pilfering through your scrapile with all the Iron and brass u just showed all of them.😂 Great job on the fire truck, interesting to see how you build it out 🚒💯

Just get that motor running sweet! Give it a tune and replace the disposables, adjust the valves and see what it's like. It's a piece of history, would be a shame to turn it into a boat anchor.

Get with a youtube paint restoration specialist like AMMO. That red would come back. Just keep the patina. Awesome job guys. Shout out from your neighbor next door in Spokane.

I've got a 1972 LaFrance (nearly identical) sitting in my backyard right now that I have plans to do this with. Mines got a "Screaming" Detroit Diesel with an Alison automatic though :) My plan was to scrap everything behind the engine. I was then going to put a lowered deck on it with a dove tail. I like the suggestions others have made about air bags in the rear to get it lower when loading.

@ronfrance4041

2 жыл бұрын

Which Detroit does yours have?

12v Cummins be nice, and simple. Or p-pumped 24v! 👍

@zacharycash8543

2 жыл бұрын

Hell yea

Years after this you will look at that wrench and say why is this thing so short and then you remember this. Edit: When I saw the firetruck shoot flames out of the exhaust I was so amazed. This fire truck is the most badass work fire truck ever!!

I think that you should reassemble the main pump and attach it to an engine to use for a white water rafting channel . Create a pond at the bottom of a hill , dig a channel into the hill and line with plastic sheet, use the pump to circulate the water to the top of the hill and now you have a whitewater run for some fun on hot summer days.

Hi there, Neil from Dominican Republic. Can't wait for the next episode.

Love how this video ended of them walking in slow motion to refuel that gas guzzler of an engine. Can't wait to see the new garage next spring and the rest of the builds progressing

Awesome Grind Hard Plumbing Co, yewww!!!

Yayyy finally an update on the firetruck!!!

@GrindHardPlumbingCo

2 жыл бұрын

Yes!

Airbags in the rear to drop for loading and unloading would be sick. Help the break over angle too. That unit is sick.

Grind hard slowly but surely cementing themselves into KZread/internet history

There is alot of options for that. Diesel swap - 12 valve for simplicity, 3116/3126 cat isn't horrible and found in tons of busses, dt466 is a box truck dream. Could have a welder /compressor built in Could have a fuel cell too. The extra battery space for overnight. That small water pump would be handy too

I love the multitasking. Rigging up your own skid steer while wearing a welding mask haha.

@haroldphipps3457

2 жыл бұрын

Too bad they don't have a tri pod so camera person can put down the camera and help.

Actual plumbing on Grind Hard Plumbing.

Lotta plumbing! Cool truck!

That truck would look good all polished up

You guys are in a class all to yourselves...

So much potential in that chassis. You could hook up pto generator on the pump drive shaft. On board power. Some bunks in the old pump area.

I vote pink camo for the paint job, with your skull emblem on the doors! Would be sick

@lennym1273

2 жыл бұрын

Or just Barbie pink lol...

@GrindHardPlumbingCo

2 жыл бұрын

That would be super cool! We kind of like the old patina though…

@zoomert1204

2 жыл бұрын

You made me think of it when you said it looks like a military truck with the flat bed. Lol

All those baffles in the tank so it didn't slosh when this thing went around corners. Pretty cool.

Really love your channel. Is anyone else kinda sad seeing that old firetruck cut apart? It will make for an awesome flat bed but man I loved the original firetruck no matter how impractical it was. When you guys bought it I told my wife "lucky for you they found and bough it or we would have a firetruck in our yard"...LOL!

@IeeIee778

Жыл бұрын

Just think of it as its getting a new life

Man U guys r livin the dream

Ethan most definitely is a Legend! 👏🏽👏🏽👏🏽

Oh yes, loving the FireTruck content. Easily your best project in my opinion.

I really love how the fire truck is spitting fire out the exhaust...awesome

Can't wait till you guys start working on this again in the new shop

sooo cool it cannot be measured! every car guy has considered this project at least once

instead of ramps for small powerwheels, gocarts, atvs, and motorcyles, you could use small swing out winch crane to pick up toys and place them on the truck. also make it easy to load non running projects and other non rolling items

you guys need to buff that beast out! itll take a couple weeks but itll do absolute wonders

Omg! Love you guys great stuff and keep going with the two uploads a week!

Ooooh that gauge panel would be awesome decoration on the truck somewhere! It gives that real old timey firetruck vibe…

Let’s go I’ve been waiting for this 🔥🤟

This is such a cool project!

Glorious!!!!!

That's going to be one bad boy toy wagon.

The PTO drive for the pumps makes a perfect place for a PTO driving winch

@MadOmega

2 жыл бұрын

I would think about getting a old roll back flat bed from a wrecker. It would solve a few issues you guys have on occasions.

Legend for sure...

Mighty fine plumbing, sirs

You guys should notch and airbag the rear. The ramps will be smaller and it’ll sit closer to the ground for max coolness!

cool build look forward to watching more.

Greatest hauler ever! Great work fellas. 🤘🏻

All gauges, including pump panel gauges, electrical parts, lights etc from that truck are collectable and have value to Restoration groups of antique Fire engine owners.

You guys do the coolest stuff

This is an amazing idea. I love it!

Awesome video as always, you guy’s never disappoint!! Great work!!

Bad ass can't wait to see what next