Flat roofing installers London,Torch on high performance licensed installer Aldersbrook
a brief video of a high performance cap sheet being installed correctly on a flat roof by Danny of Aldersbrook Roofing Flat roofing installers www.aldersbrookroofs.com
Пікірлер: 134
What a cowboy I’ve never seen anything like it
@user-1980_fahad
Жыл бұрын
المشكلة دائماً بالانسان والحيوانات ليس لها علاقة
For anyone criticising, this is how work quality evolves when customers always choose the cheapest quote.
use a metal puller and preheat the laps a little ahead of time if you want a bleed. dont walk or knell on your rolls, stan behind the roll and pullit towards you. If you work fast the rolls you are currently kneeling on would be far too hot still and would leave marks. Maybe it doesnt because you only heat the laps which is incorrect.
@alexgreig3598
17 күн бұрын
Must have asbestos hands and tough knees kneeling on that mineral!
Bet that guy burns himself so many times a day At one stage i thought he was never going to move the gas hose
I would get fired if my boss saw me torching like that. Geez that's terrible. He doesn't even cut corners when he overlaps!
@tinkletoesrus
2 жыл бұрын
whats this mean mate im learning to do this. pitched roofer by trade
@bumblaster9000
Жыл бұрын
@@tinkletoesrus you cut the corner of the black off at the end of each run
@ajelicits3435
3 ай бұрын
@@tinkletoesrus watch soprema training course of flat roofing torch on if you wnat to learn the proper way.
I swear, you would’ve been fired 30 seconds into this video. That’s a 400,000 BTU torch and you decided to go with your bare hand?
@ajelicits3435
3 ай бұрын
the bare hands part is not even the issue here, it's literally everything else hes doing including wearring shorts. Ive roofed over ten years and rarely use gloves when torching, a small burn on the hand is nothing, open shorts on the other hand is insane. if hot tar splashes your legs i feel sorry for you. also the way he torched the roll was all wrong.
Geez! Get yourself a trowel, long pants, pair of gloves and a longer hose. Feel for the people paying for this work.
@boyo57
Жыл бұрын
And a decent stand so he can put the torch down....beggers belief😁
Don't worry about cut corners underlay would be a good start
@shariefadolley2156
6 ай бұрын
How do I get I touch withu
Shocking felting!
He is proud to show his master work lol
That looked like hard work jesus
Gloves???
I cant believe they posted this to advertise the company lol a fart could rip that up
That joint is going to blow bubbles
You sure, ! what you warming up a lap in the underlay for ?????
The London way ey , that mineral looks nasty reminds me off a ciggy paper
Howdy ho partner!! Wodkaroofer for live!!
History states that he is still torching this on in 2025 😂
@ajelicits3435
3 ай бұрын
hahahhahaah
i hope he isn’t a foreman cause honestly I’m concerned for his crews safety.
That ain't stuck where did they find this fella 🤔
Kneepads, gloves, safety glasses, long sleve shirt, pants and a fire extinguisher
Spot welding lol I think it's time for me to post videos
Haven’t got a clue 🤪🤪🤪
There's no way u got a licence for that torch 🤣🤣🤣
His fingers are crying out for more
ok, you also have to cut a 45% angle on your pieces you are going to connect onto each other. it allows the entore rolls to stay one size instead of doubling it up and created high spots. he's also wearing shorts, wtf???? he's not getting any rrof down the way hes doing it, his knees would literally burn if he was kneeling on a freshly torched piece or even on a very hot day the cap gets so hot even with clothes its too hot to kneel on.
You should be ashamed, thinking you where going to get away without anybody roasting you 😂
this is what you call a lap torcher. you have to heat the entire roll. I could get the right angle and ppull that up not long after you torch it down. if properly torched you cant.
No roll bar, cant control the spread of bitumen across the roll, it must all be fully adhered
Lmaooooo from Canada. Get a pull cane rookie
@whoville90
3 жыл бұрын
Hknestly... i think herr in Canada we have better torchers ive seen so mNy vids from other countries and damn horrible work
Should be called john wayne roofing london
Of all the crap felters I have seen on here I think you are sitting round about No 6 !
@tristanedwards1340
3 жыл бұрын
He didn’t even win that
@davidgray5252
3 жыл бұрын
6 thats generous
Good job. Most roofers do slop jobs. But it would be easier if you had gloves , a bar , and knee pads
@Ser_Yozha
7 ай бұрын
Это плохая работа. Он вообще не умеет работать.
This geezer winding me up
How do they get away with this work and better still get paid for it, beats me!
Cowboy 💯! Shorts & no gloves 🧤 😂🤣
What is this ? Your fired on my book.
Ever heard of pulling your roll with a cane?This is why people percieve roofers as idiots!
Fully licensed in doing it the wrong way 😂
I think a glove would have made life a lot better.
@dannyrodrigues3226
4 жыл бұрын
asbestos hands are always good
@richardgardner8503
4 жыл бұрын
And knee pads
@Chris-jl6vk
3 жыл бұрын
And a foot
@Chris-jl6vk
3 жыл бұрын
Pro's don't need gloves
No gloves wearing shorts maybe high performance felt not labour
By the way good roofers cut corners. Ifree game for ya
Shorts!?
Why is he using a scraper for the lap underneath 😅 what ever happened to using a roll bar? I'd have done 3 jobs by time he completed that run
Holding the blowtorch wrong, the technique is completely wrong 😂😂😂
@olej2183
3 жыл бұрын
It doesn't matter what technique you use 🤣 the end result it was matters. If the technique works for him then it's not wrong 🤣
you have no idea to install asphalt sheet. The first thing you have to do is put on some gloves and suitable clothes. and the second is to move the hose aside so that it does not burn.
@windsorroofingsolutions
2 жыл бұрын
Wy ant he rolling it out with his foot wat a fucking joke.id put a 100 meters down by the time he had layer a 8 meter roll
He doesnt have e to shave his knees anymore
Where’s the pressure to ensure no air is trapped?? Any trapped air will form into a blister when warmer weather arrives. Might look flat now but wait for hot weather 😰
@wallywally3738
3 жыл бұрын
How would you apply pressure?
@mikerim6861
3 жыл бұрын
@@wallywally3738 Roll the felt up tight and get on ya feet behind it, roll it out with pressure from your foot, thus forcing air out. Science says air expands with heat so trapped air forms blisters. That guy on the video isn’t a roofer, he’s painful to watch
@mjh5437
Жыл бұрын
@@wallywally3738 Have someone following behind with a heavy roller while its still molten soft.
not a clue
Move the tank.. Dann near burned the hose
Cuanto por squares
ma cosa stai facendo?
I find it very hard to abide by KZread's mantra of keeping comments respectful etc etc when you see work as fucking shit as this!!!
Man it's gone burn his fingers 😅
😳😳😳😳😳😳😳😳😳😳 Good grief !!!!!!!!!!
Necesitas 👢 y guantes
No gloves, tar all over the gas hose, and why even bother with the Hi-Vis?
Your having a laugh defo your first job
Lol!!
You can’t work as a roofer without gloves!
What the fuck is he doing 😂😂😂
I’m a flat roofer and honestly, Iv never seen anything like it. No gloves. No constant flow of heat, crap bleed. Sorry but that won’t last 5 minutes. If you stuck your underlay properly then you wouldn’t have had to stick the lap Jheeez 🤢🤢
@olej2183
3 жыл бұрын
Because he most likely use a sbs type and not a app thats why.
😁😁😁😁😁😜😜 Superrr
No gloves, he's burnt hosing tube. He should be rolling with feet. He's too slow felt not sticking properly He's a cowboy make no mistake!!@
Chi gon primo asies
Omg
لم يتخذ اي شي من ادوات السلامة. والجودة
lol
I dont that's work
That's not how you do it 😂
Cowboy!!!
What the fuck is he doing ?
Comedian
What a grade 1 mug for doing this without gloves, knee pads, and worse of all how close was he to the gas line ??? People like him need to get an office job, accident waiting to happen. Yeah lets do a YT vid to advertise who we are and what we do !!! CSCS card? Yeah right """
Mala técnica
69 likes🤣🤣😅
😂😂😂😂💩💩
Wow I’m not mr health and safety but he is a accident waiting to happen
Joker
Not my way of roofing.
What a total div,he hasn`t got a clue,that won`t last 20 months,never mind 20 years.
Cowboy
Amateur
This was painful to watch.
Trrrrrrasssshhhh no even heat, no cut corners, no cane, no trowel, no gloves, wearing shorts, propane tank to far or not enough hose..... fiiiiiiiiiired... wonder if he even has a propane ticket to even connect anything to a propane cylinder lololol.....
@AliGspot
2 жыл бұрын
Haha it is terrible work. Wondering what you mean by cut corners? Do you do this on the straights across the deck?
@projektredduck4592
2 жыл бұрын
@@AliGspot Anywhere there's an overlap even for wall flashings...Don't want any peeled up corners, do it for TPO, PVC and burmastic. Your boss will thank you later for saving him money and time. Unless he's a cheap asshole then. By all means do what you want lol.
@projektredduck4592
2 жыл бұрын
Also noticed he didn't butter up that end lap, don't be like that clown. Better yet don't follow this company or use their video as any form of learning tool. Lol 😂
@AliGspot
2 жыл бұрын
@@projektredduck4592 great advice, thanks mate
Totally amateur!! Why post this?
So bad work
Slow and sloppy
Lmfao this is horrible bro wtf r u doing use a dman cane honestly I think the best torchers are here in Canada... I mean I've been doing this work for 8 years only .. no lie, my work is impeccable... I'm already at 42.50... and hopefully soon get to run crew :) and imnjust 30
Cowboy