That was a million dollar answer. No one has ever explained camera Kelvin settings that well.

A step further: if the weather is overcast and you want a blue sky at a wedding, you can use the same principle. White balance Tungsten and CTO gel on the flash. The bride's dress will be white and the sky blue

@DavidBergmanPhoto

3 жыл бұрын

Yup. I did a video about that technique a little while ago on IGTV. www.askdavidbergman.com/grey-sky-blue/

@DavidBergmanPhoto

3 жыл бұрын

And another from the two minute tip days: kzread.info/dash/bejne/jKhnqM-IpKi7oKQ.html

@TamilTop5

Жыл бұрын

WELL SAID.. THAT WORKED AWESOMELY..❤

Love using white balance as a creative tool to get a different mood for the available light and then correct for subject with the appropriate gel for a very stylized look.

Love his lighting in his studio. Always looks awesome

Love using a Blue CTB Gel on my flash, set the K on the camera to really Warm, to recreate a Golden hour, when I don’t have one! Thanks.

@DavidBergmanPhoto

3 жыл бұрын

Awesome. Maybe only a 1/2 CTB so that you don’t remove all the warmth from your subject! :)

Thanks for the easy to understand explanation. I just recently purchased the Magmod Bounce and went with the whole kit with all the gels included. Now I can put them to good use. Thanks 😀

Validation! I use CTO gel on my flash all of the time. For some reason another photographer thought I was a weirdo for doing this. Maybe he thought I could just brush out the background in the RAW editor? Who knows...

@DavidBergmanPhoto

3 жыл бұрын

Ugh that would be a nightmare on more than a handful of frames. Hours of post-processing avoided with an inexpensive piece of plastic! :)

Thanks, David. Succinct and Informative! I look forward to your videos every week!

Very helpful ! Thank you for the dominstration .. i just bought those gels and i can't wait to experiment with them👌🏽🙏🏼

You explained that really well. Really enjoy your videos, informative and interesting.

Thank you David, I understand this now!- great explanation

Great lesson! Thank you David 🙂

Very good and easy to understand proper need and use of cto gels on flashes. I’ll try this next time I shoot indoors at a very warm colored room.

As usual, excellent David.

FINALLY, the perfect explanation of manually setting the K white balance... I could never understand when to use blue or orange because it always seemed backwards to me.... Fantastic video... I am shooting tomorrow and its going to be a cloudy day, Now I will be able to gel my flash appropriately and get the best WB.... on top of that,... now that I understand it, I can get creative!!!!! Thanks for another AMAZING video!!!

Thank you for great explanation.

I, too am one of those old guys from the film days. We used the good ol' 85B filter over the lens when shooting daylight film in tungsten light. This was nice, but it cost you 2 1/2 stops which may have forced a tripod into the mix. To be blunt, they weren't the "Good Old Days". What a pain that was...

@DavidBergmanPhoto

3 жыл бұрын

Right? Amazing how much easier technology has made some things.

Thank you David. That was very informative...I actually learned a lot just from this video!!!

@DavidBergmanPhoto

3 жыл бұрын

Glad to hear!

Wow! That was a loaded question!!!

You always make things so much easier to understand..thx again. D.L.LaBelle

Thanks. This is perfect for a shoot that I have next week

very well said. i will rewatch again and once u understand the technique then u will be a better photographer for sure. thank you so much.

Cheers David much appreciated

well explained , thanks

I’m a super heavy rosco calcolor gel user. I subscribe to the belief that white light is a lie. Even when clients demand a neutral shot, I always work in at least a subtle color shift between the shadows and key light. That’s just how I roll.

@DavidBergmanPhoto

3 жыл бұрын

Awesome! I went through a phase where I permanently had a 1/4 CTO on my flash to subtly warm up all my subject.

@AdrianBacon

3 жыл бұрын

@@DavidBergmanPhoto Yeah, for me, it's less about warming the subject. Neutral is relative. Color contrast doesn't always mean warm vs cool. Hence Calcolor. As photographers, we use lighting contrast to make a scene all the time. I add in color contrast of the lighting on top of that. You can still have a scene that is "neutral", but still has color contrast between different elements. I often will shoot one or more images that really are neutral, then shoot the same thing where the scene is centered on the same relative color neutrality, but has at least a little color contrast built in. 9+ times out of 10, the images that have that added color contrast get picked over the totally neutral images.

Nice one! Thank you!

Great video David! In the eighties I remember that I was about to by a kit with complementary filters and gels to accomplish some special effects. Blue gel - yellow filter etc. I can’t seem to find that anymore. What are they called? Do you have some comments on that?

Thank you!

Perfect thank you :)

That hair light 😍

excellent

Hey David - great video, very helpful. I've heard that in order to have rich saturated colors using a gel the flash should be on low output, like 1/8 or 1/16. You didn't mention that in your video, so I wondered if you agreed. Thanks in advance.

@DavidBergmanPhoto

3 жыл бұрын

There is no absolute number as it's relative to your exposure and the other lights. But yes - underexposing the gelled light will give you more saturated color. I did a tip video about this a few years ago here: kzread.info/dash/bejne/dZN41818YMu6ido.html

Thank you David! Clap On! Clap Off!

Dave, I plan on using flash fill during the golden hour, Would a CTO gell be a good choice during this time of day?

Sir, can you make a video on how to use Auto Exposure and Exposure lock (AE/EL) on Nikon camera ?

Excellent explanation. My question is what if you used Kelvin 5000 instead of using Tungsten setting, would a gel be still necessary? Would the end result be the same?

Thanks for this! But question do you ended up after using the gel, switching to tungsten auto on camera and didn’t use kelvin?

Thanks you for perfect vid! How do you determine which corection gel/filter (CTO, CTB, fluorescent) to use, when you have only camera (no notebook etc.) to check photos? Do you make your decission based on available exact light source? What about different WB of daylight throughout the day? Next hard thing is to decide which gel intensity to use... this is very difficult topic... Thanks you

@DavidBergmanPhoto

3 жыл бұрын

If you want to be exact, you could use a meter that measures the color temperature. But I bet 99.9% of us just guess and see how it looks. :)

Do you have a grey card tutorial?

@DavidBergmanPhoto

3 жыл бұрын

kzread.info/dash/bejne/iGWtmpuEYs7Pn9Y.html

Hello, thank you for this! I was wondering if you were able to share what would be the best solution for when you are shooting indoors in a space that has window lighting but also has tungsten lighting inside. I typically gauge by what the dominating light is, but I still find that I am getting mixed lighting in this case, it just seems like the type of situation that you can't really do much about, or am I wrong? :-/

Well, maybe *YOU* wouldn't change out those bulbs but I will. I've been careful to replace all my bulbs with daylight balanced LED bulbs. They're more expensive but I really prefer the light they give off. I loathe that nicotine yellow cast that cheaper 2700K bulbs give off. Thanks for the video!

@DavidBergmanPhoto

3 жыл бұрын

Hah - sure if you're working in the same location all the time (or have an appropriate budget!) then it's definitely worth it!

Complicated subject explained very well. Good thing this wasn't the old Two Minute tips.

@DavidBergmanPhoto

3 жыл бұрын

Thanks! I love the short format, but some topics just need a bit more time. :)

hello I shoot a lot in bars where there are constant variations in light, how do I get the correct white balance using flash? I have a Godox TT350s I use ttl mode and a Sony A7III,

Is the CTO different than any other orange color gel? Or it "has" to be "CTO" graded?

This may or may not be a silly question, but is ever a situation in which you don't know what the colour type is say at a wedding reception hall??? Also, how would you go about colour matching if they're are multiple colours of light???

@DavidBergmanPhoto

3 жыл бұрын

Easiest way to figure it out is to shoot a frame on daylight white balance and see how it looks? With mixed lighting, you either need to balance for the predominant color or don’t worry about it and let things fall where they may. :)

Thanks a lot for the video. Just an observation: different from Celsius and Fahrenheit, Kelvins (1:30) are not measured in degrees, so it should be: "5000 Kelvin" or "3500 Kelvin" only . ;)

@DavidBergmanPhoto

3 жыл бұрын

Thanks! I actually did not know that and always thought it was also measured in degrees.

Great vid. Would the Color Checker work with the mixed lighting or still use the gels?

@DavidBergmanPhoto

3 жыл бұрын

Color checker is a great way to get accurate color on your subject, but you still need gels to fix the white balance mismatch.

@thomastuorto9929

3 жыл бұрын

Thanks.

How can I cut down gels from larger sheets. I tried scissors but it’s rough cut. Is there anything that can cut the gels in a shape like a square or circle

Lets change all the lightbulbs in a reception that shouldn’t take long 😂, jokes aside thanks for the detailed visual explanation !

Can't you also take the brush tool in lightroom, brush over your subject and adjust the color temperature? I know this wouldn't be the preferred method, but a one off photo that got messed up from another light could be fixed this way, right?

@DavidBergmanPhoto

3 жыл бұрын

You sure can. But as you suggest, you wouldn’t want to have to do that with more than a couple images. Also more natural looking to get it right in camera.

Hi David! I have a question and I would really appreciate it if you could clarify it for me. If I am photographing in a very large indoor environment in which I must balance the ambient light with the flash light, but I have an extreme situation of lamps with lights at 2800 Kelvin and another at 7000 Kelvin, is it possible to balance these extremes using the CTO or CTB? Thank you for your attention! Thank you very much

Since we're talking about flash today, are guide numbers still relevant?

@DavidBergmanPhoto

3 жыл бұрын

Sure - especially when buying a flash. It’s a better indication of how much light output you can get as opposed to watt seconds.

I use gels for lighting my smoke machine's smoke with color from the rear and keeping a normal color for my subject.

@DavidBergmanPhoto

3 жыл бұрын

Smart! Blue, I’m guessing?

@yeohszehow

3 жыл бұрын

@@DavidBergmanPhoto yeah....blue color.... I did posted it out on my fb too... you are a saint.....

This might be a dumb question, but i cant seem to find an answer anywhere. I shoot with studio strobes, softboxes and diffusers, how do i attach colour gels to the flash that way and will it still give the same affect?

@DavidBergmanPhoto

3 жыл бұрын

Easiest way is simply to tape a large gel to the speeding or anything else you can so it covered most or all of the light. Just make sure the gel isn't directly touching the bulb or you'll have a mess of melted plastic (and a horrible smell!) to clean up.

Can I ask what is your camera setting for this video and did you shoot in C log and edited the video or a different setting, and one last thing are you using 35mm on your 16-35mm Thanks

@DavidBergmanPhoto

3 жыл бұрын

Not shooting log since these videos are relatively simple (color grading wise!) and it's pretty close straight out of camera. I do shoot 4K and downsample to 1080p in Final Cut Pro. Lens is usually around 24mm.

@johnnyorellana2534

3 жыл бұрын

@@DavidBergmanPhoto Thank you for taking the time to answer my question.

@thomastuorto9929

3 жыл бұрын

@@DavidBergmanPhoto I'm guessing a dslr. Audio straight from camera thru a mike or using a separate recorder?

@DavidBergmanPhoto

3 жыл бұрын

@@thomastuorto9929 external mic into Zoom recorder.

Clap Clap Clap!

Struggling with this...I'm not comprehending how a tungsten light in the 2300k range would be considered "warm" when daylight is 5600k and numbers "below" are cool, while numbers above are "warm". Why then is a bulb that is in the 2300k range now thought of as "warm"?

@DavidBergmanPhoto

3 жыл бұрын

I address this in the video at 6:45 - Direct link: kzread.info/dash/bejne/dpaO3Muwk8ywlbw.html

🌟✌️

can we clap for the clapper, the OG smart home turn on turn off light switch.

@DavidBergmanPhoto

3 жыл бұрын

Clap to change white balance!

Terrifying mannequin, great video...

I've never heard you talk so much.

@DavidBergmanPhoto

3 жыл бұрын

LOL Jose I guess you haven't been watching my weekly videos for the past 5 years. :)

@shomanightmare

3 жыл бұрын

@@DavidBergmanPhoto wrong!!…I have been watching and yes, there’s lots of talking. However, you outdid yourself in this one