Flash Code readings on a Detroit Diesel 60 series eng
I created this video with the KZread Video Editor ( / editor )
Жүктеу.....
Пікірлер: 9
@robertjackson75905 жыл бұрын
Often when you reseat the connector and the code issue disappears the problem hasn't been eliminated. What you have is a floating connection, sometimes it makes contact and sometimes it doesn't. The female socket is loose and by reseating it your problem is momentarily fixed. I'd replace the female sockets at least to make sure the code doesn't return. If the connector looks as good as that one I'd probably have my tech replace the sensor too. Some sensors start breaking down and develop intermittent issues. When someone says they have a ghost code that comes and goes, this is exactly what you are dealing with, there are no ghosts. DTC's can only be cleared with a Scan tool on DDEC. I wished I could find a way to clear them otherwise. I manage an Allison transmission shop sending techs out and we can clear them on the shifter. We've been running into more DDEC engine electrical problems we can help on and we want to help all we can. Some might think it sounds like a parts replacer mentality. A bill will be $1,000.00 to $1,500.00 easily and if we have to go back we'll have to cut the invoice to be fair. The worst of it is that we'll be called on the same code they had before. We don't like that. The cost of the sensor is minimal in the big picture. I apologize for the short story.
@shanehoward97566 жыл бұрын
I’ve a Ford l9000 with m11. How would I find Cummins m11 flash code list?
@alexbacx62005 жыл бұрын
great video sir, very helpful. by the way, i got a detroit series 60 12.7L and it's now not starting up. in cranks but wont start. can i get tip from sir as to how do i fix it?
@pcdetail6026 ай бұрын
I'm getting a w a warning light and engine shutdown on my 1996 international eagle 9200 Detroit 60 series 12.7. How can I get the code on this one ?
@Saltacokote4 жыл бұрын
My truck don't have that lower switch bottom no where's to find it. 1998 fld daycab
@fergar34806 жыл бұрын
How do you delete it from ir ecm
@Madcracka6 жыл бұрын
Thanks for that good tip I found the code and I believe I know what it is. Is there a way to reset all the codes without a computer?
@troykunz8275
4 жыл бұрын
Scan guage available for 50 to 125 bucks on ebay and elsewhere
@kinglouis92985 жыл бұрын
Dealer would have no problem charging you a couple hundred bucks for that
Пікірлер: 9
Often when you reseat the connector and the code issue disappears the problem hasn't been eliminated. What you have is a floating connection, sometimes it makes contact and sometimes it doesn't. The female socket is loose and by reseating it your problem is momentarily fixed. I'd replace the female sockets at least to make sure the code doesn't return. If the connector looks as good as that one I'd probably have my tech replace the sensor too. Some sensors start breaking down and develop intermittent issues. When someone says they have a ghost code that comes and goes, this is exactly what you are dealing with, there are no ghosts. DTC's can only be cleared with a Scan tool on DDEC. I wished I could find a way to clear them otherwise. I manage an Allison transmission shop sending techs out and we can clear them on the shifter. We've been running into more DDEC engine electrical problems we can help on and we want to help all we can. Some might think it sounds like a parts replacer mentality. A bill will be $1,000.00 to $1,500.00 easily and if we have to go back we'll have to cut the invoice to be fair. The worst of it is that we'll be called on the same code they had before. We don't like that. The cost of the sensor is minimal in the big picture. I apologize for the short story.
I’ve a Ford l9000 with m11. How would I find Cummins m11 flash code list?
great video sir, very helpful. by the way, i got a detroit series 60 12.7L and it's now not starting up. in cranks but wont start. can i get tip from sir as to how do i fix it?
I'm getting a w a warning light and engine shutdown on my 1996 international eagle 9200 Detroit 60 series 12.7. How can I get the code on this one ?
My truck don't have that lower switch bottom no where's to find it. 1998 fld daycab
How do you delete it from ir ecm
Thanks for that good tip I found the code and I believe I know what it is. Is there a way to reset all the codes without a computer?
@troykunz8275
4 жыл бұрын
Scan guage available for 50 to 125 bucks on ebay and elsewhere
Dealer would have no problem charging you a couple hundred bucks for that