Walk through the replacement of an OEM FJ Cruiser seat cover.
Жүктеу.....
Пікірлер: 22
@andydang57703 ай бұрын
Thank you for posting
@russblackdiamondadventures2 жыл бұрын
At 23:21 I refer to using a socket, I inserted a small deep well socket into the fabric sleeve to assist in guiding the wire through the sleeve. Unfortunately, the clip showing this didn't turnout.
@Miguel_PuroGuasave_Rodriguez8 ай бұрын
What I think that all the comments forgot to talk about was your determination and I loved it. Of course I also learned from your video but for me your determination to do it was great. 👍🏼
@maxagent86 Жыл бұрын
Thank you for posting this, but I must tell you and the viewers that the technique that you used to remove the hooked rods (you called them "stays") was wrong, hence all your difficulties with it. You are actually supposed to remove the rings (aka hog rings) and reinstall them using a tool called "hog ring pliers" - look it up, they cost between $11-15 online. It can be done with regular pliers also, albeit not as easily as with hog ring pliers, but still much easier than the way you did it.
@BG-uf2nv
Жыл бұрын
Ditto on this comment. This job is a ton easier if you just cut the hog rings to remove them. The cover then comes off easily. Then you can put the new cover on with new hog rings using a hog ring tool. Easy peasy. No struggling.
@eyasutilahun52476 ай бұрын
Thanks!, that was the heck of work you're very patient installing it I my self had thorn seat but I don't think I would be good at it. I may look for installer.
@garnermcculloch27787 ай бұрын
Thank you for demonstrating this and showing me that I never want to do this. 😂 God speed.
@ronaldcampbell17 Жыл бұрын
This was fun to watch. Thanks!
@knifeknerdreviews4609 Жыл бұрын
Thanks for posting this... I had found this OEM seat cover a while back and intended to order but had no idea what would be involved in installing it, now I know and I know to buy the hog rings and hog ring pliers in advance. I also need to do the seat back cover because it has the infamous hole that happens to all FJ Driver seats, just need to figure out the best way to cover up that piece of metal that sticks out of the foam and ultimately tears the seat back cover... I can see yours does not have the hole yet but it is not far off...
@maxismax4 Жыл бұрын
Thanks for posting this!
@edgepizanno13452 жыл бұрын
Great video!!!
@briannugent78369 ай бұрын
Bro did you steal the driver's seat out of my FJ we have identical tears in identical spots LOL
@luiscardozo00004 ай бұрын
yes i want to replace mine but the oem cloth is very expensive but also is the best upholstery and confortable i ever seen in a car ...they offer me to install leather for less than half of the price but its not water proof anymore and it looks ugly and cheap
@jamesray392011 ай бұрын
This is a year ago viedo but I wish you showed the clip in a better image I have lost my clip because I installed seat covers now I'm looking for same or similar clip I wish Toyota just had a center screw instead of clip
@jamesray392011 ай бұрын
I just bought new seat covers from clazzio custom seats
@javi111488 Жыл бұрын
Where can i find that cover and how much?
@russblackdiamondadventures
Жыл бұрын
It's a Toyota part, I believe it is: 71072-35244-B1
@classicsandcruisers1308 Жыл бұрын
Do you have a part number? I can't seem to find the oem replacements
@ricardocoronado9321
Жыл бұрын
Yes that would be great to know.
@russblackdiamondadventures
Жыл бұрын
I think this is it. www.toyotapartsdeal.com/oem/toyota~cover~front~seat~cushion~lh~for~separate~type~71072-35243-b1.html?vin=&make=Toyota&model=FJ%20Cruiser&year=2007&submodel=&extra1=&extra2=&filter=()&location=pd:,
@euroflipn
Жыл бұрын
Are the seat covers all the same? I have a 2013.
@russblackdiamondadventures
Жыл бұрын
@@euroflipn I believe they are al the same 2007-2014
Пікірлер: 22
Thank you for posting
At 23:21 I refer to using a socket, I inserted a small deep well socket into the fabric sleeve to assist in guiding the wire through the sleeve. Unfortunately, the clip showing this didn't turnout.
What I think that all the comments forgot to talk about was your determination and I loved it. Of course I also learned from your video but for me your determination to do it was great. 👍🏼
Thank you for posting this, but I must tell you and the viewers that the technique that you used to remove the hooked rods (you called them "stays") was wrong, hence all your difficulties with it. You are actually supposed to remove the rings (aka hog rings) and reinstall them using a tool called "hog ring pliers" - look it up, they cost between $11-15 online. It can be done with regular pliers also, albeit not as easily as with hog ring pliers, but still much easier than the way you did it.
@BG-uf2nv
Жыл бұрын
Ditto on this comment. This job is a ton easier if you just cut the hog rings to remove them. The cover then comes off easily. Then you can put the new cover on with new hog rings using a hog ring tool. Easy peasy. No struggling.
Thanks!, that was the heck of work you're very patient installing it I my self had thorn seat but I don't think I would be good at it. I may look for installer.
Thank you for demonstrating this and showing me that I never want to do this. 😂 God speed.
This was fun to watch. Thanks!
Thanks for posting this... I had found this OEM seat cover a while back and intended to order but had no idea what would be involved in installing it, now I know and I know to buy the hog rings and hog ring pliers in advance. I also need to do the seat back cover because it has the infamous hole that happens to all FJ Driver seats, just need to figure out the best way to cover up that piece of metal that sticks out of the foam and ultimately tears the seat back cover... I can see yours does not have the hole yet but it is not far off...
Thanks for posting this!
Great video!!!
Bro did you steal the driver's seat out of my FJ we have identical tears in identical spots LOL
yes i want to replace mine but the oem cloth is very expensive but also is the best upholstery and confortable i ever seen in a car ...they offer me to install leather for less than half of the price but its not water proof anymore and it looks ugly and cheap
This is a year ago viedo but I wish you showed the clip in a better image I have lost my clip because I installed seat covers now I'm looking for same or similar clip I wish Toyota just had a center screw instead of clip
I just bought new seat covers from clazzio custom seats
Where can i find that cover and how much?
@russblackdiamondadventures
Жыл бұрын
It's a Toyota part, I believe it is: 71072-35244-B1
Do you have a part number? I can't seem to find the oem replacements
@ricardocoronado9321
Жыл бұрын
Yes that would be great to know.
@russblackdiamondadventures
Жыл бұрын
I think this is it. www.toyotapartsdeal.com/oem/toyota~cover~front~seat~cushion~lh~for~separate~type~71072-35243-b1.html?vin=&make=Toyota&model=FJ%20Cruiser&year=2007&submodel=&extra1=&extra2=&filter=()&location=pd:,
@euroflipn
Жыл бұрын
Are the seat covers all the same? I have a 2013.
@russblackdiamondadventures
Жыл бұрын
@@euroflipn I believe they are al the same 2007-2014