A lot of negative comments that comes from people who are struggling with themself and wish they had a company like yours. Great job done on this car. It is my goal to have a detail shop on that level one day.

Fascinating method of performing a multistage machine polishing. The gloss on that blue car is outstanding. I am happy you are back to producing content on KZread.

@TopazDetailing

Жыл бұрын

Glad you enjoyed. Would you like to see more of this kind of video?

@mirrorreflectionsautospa

Жыл бұрын

@@TopazDetailing the detailing world is better when you are producing KZread content.

I detail my wife’s e89 , wheels , iron X ,snow foam auto glym shampoo fines and towel off , takes hours , but the final result is worth it, not tried the Clay bar and d/a polish yet . Maybe one day . Love watching these guys do their stuff , going to try their products as well. 👍

I am passionate about detailing… everytime I see a topaz video… I realize how much more I can do!!! Simply fantastic 😍😍😍

Wow insane result ! Always great video, i’m a fan… ! What compound do u use with a DA Microfiber pad? Thanks for all, cheers

looks better than new!

@TopazDetailing

Жыл бұрын

Thank you!

Looks fantastic …great work 😎👍

@TopazDetailing

Жыл бұрын

Thanks for watching!

Why was the ceramic coating applied over an application of quick detailer spray? Surely the car should have been wiped down with IPA and then the coating applied to bare paint instead…

@TopazDetailing

Жыл бұрын

You are right, but just for timing reasons with the videographer we didn’t get every single step on video. We will make sure we do for the next one!

@patrikkagstrom2393

Жыл бұрын

@@TopazDetailing So the detail spray was after the coating ? Don't understand your answer .

@Kmh0277

Жыл бұрын

@@patrikkagstrom2393 Hopefully the order got mixed in editing but I don't see why they used quick detailer at all. Also, just one ceramic coat? No need for quick detailer unless it set for a few days before pickup. You'll just start messing up the perfect finish.

@patrikkagstrom2393

Жыл бұрын

@@Kmh0277 Yes ! Why quick detailer at all Topaz ?

That's a super deep detail their lots of blessings from down south pharr texas my friend keep it up

@TopazDetailing

Жыл бұрын

Thanks for watching

@Southsidefulldetail

Жыл бұрын

I do the same thing but I been working some of this Car-wash down here in south Texas some of them they don't washed the rims from the inside they don't washed them right I'm a good detailer I wish I could have my own so I can have my own clients so happy

Great detailed video as always ❤️ btw which brand compound and polish do you guys use!?

@TopazDetailing

Жыл бұрын

Thanks for watching, we use a variety. 3M & Meguiars usually

Yo Topaz, amazing work on the GT3, kinda reminds me of that drag race you did with your GT3 at Carwow with Mat and your brother. Talking about cars, can you please lend Mat some more cars to drag race🏎

@TopazDetailing

Жыл бұрын

We hope to do it again soon!

Good evening topaz I am looking for a new drying towel for my car is there anything you would recommend and got a quick question about the fallout remover wouldn’t you put on after you wash the car? So then you can see the contaminants going out.? I’m just wondering have you done a tutorial on how to get those incredible stripes? For the interior. Keep up the good work. Thank you very much. Tristan

@TopazDetailing

Жыл бұрын

We sell a great drying towel in our store (linked in the video description). That’s just how we use the fallout remover, doesn’t mean it’s the only way it can be used. We haven’t done a tutorial but it’s just a matter of brushing the carpet in stripes

@LoudModeOn

Жыл бұрын

Figure out which direction the nap of the rug/carpet goes, brush the entire rug/carpet in that direction and then brush stripes in the opposite direction. And yes personally I'd use the fallout remover after washing the car, that bit confused me too.

Love my 997 GT3.

@TopazDetailing

Жыл бұрын

💪

Perfection

@TopazDetailing

Жыл бұрын

Thanks for watching

Whatever happened to Topaz Skin peelable paint? Would that not have been a better protection option than just that one piece of PPF?

@TopazDetailing

Жыл бұрын

We still do offer TopazSkin. We just completed an 812 in matte black this week

Surprised that the wheels were not removed for a more thorough clean - there is only so much that you can do with wheels still in place..

excellent , really good job , the car is in very good condition right now

Just wondering do you take the wheels of for a better clean of them and surrounding areas?

@TopazDetailing

Жыл бұрын

We do this with our Level 4 Detail

@iFeelsify

Жыл бұрын

@@TopazDetailing ahah level 3 which is a lot of 💶💶💶 and you domt take wheels off 🤦🏻

@rodneytatum6920

Жыл бұрын

@@iFeelsify I am quite sure if it is that important to one of their clients, they can just pay for a Level 4 Detail.

@iFeelsify

Жыл бұрын

@@rodneytatum6920 ok but at those prices should be included also in Level 1!

@leesmith6750

Жыл бұрын

Barrel brush on the spokes and tyre, with a cursory brush of the seen face of the caliper! Seems amazing that a wheels off is offered at stage 4. That probably why I'm commenting and not answering!

At 12.20 on the video just below the Porsche badge there’s some sort of debris on the paintwork??

@TopazDetailing

Жыл бұрын

That’s a stone chip

Topaz we all love your work, but a response to the detail spray pre coating would be nice….

@TopazDetailing

Жыл бұрын

Please see our reply to the other comment 🙏

Woah…..detail spray then coating? Confused.

@Davidhdg

Жыл бұрын

And the 2nd step with a rotary?

@muhammadpanjwani3887

Жыл бұрын

@@Davidhdg rotary is known for its cutting not finishing yes? Correct me if I’m wrong

@Davidhdg

Жыл бұрын

@@muhammadpanjwani3887yes exactly , thats why im confused😅

@oltiberisha2583

Жыл бұрын

@@muhammadpanjwani3887you can finish perfectly with the rotary but that detail spray before coating got me confused😂

@bosoares

Жыл бұрын

Probably paint prep and not detail spray, mistake by whoever edited the video.

Do you guys use Makita polishers at all? Are they better than rupes? I know in tool industry Makita is top tier

Before your own cleaning chemicals came about, which companies line of products did you decide to use to clean your customers cars?

I never get the polishing of the paintwork then a coating then a detailing spray when the application and removal involves a cloth that the detailer uses by going around and around in circles. why not just straight up and down so less chance of reintroducing swirl marks again? Also i know the car was being detailed and polished but wouldn't it be better to show when washing the car to start from the roof and go downwards? Your guys were washing around the sills then going upwards in some scenes, yes the car was decontaminated but should still be showing the correct way to wash. Great results

Why not remove the wheels then you can tackle the arches and brakes?

Wow! Without respray? I don’t see stone chips…

How much does a job like this cost?

@TopazDetailing

Жыл бұрын

Our level 3 is from £1350 + vat

Why not remove the wheels off the vehicle and clean them inside and out? Door shuts, mirrors and underneath spoiler etc weren’t even mopped.

Beautiful just beautiful 🥰 but one thing please don't use that hiphop music 🎶 let us hear the tools better than the music. It's annoying & irritating thanks ✌️🙏

@TopazDetailing

Жыл бұрын

To be honest the original audio would be a lot of hissing. The jet wash and the polisher make a lot of noise and it’s quite repetitive 😂

10:53 damma beatz up first Thank me later

First 🥇

@TopazDetailing

Жыл бұрын

Thanks for watching

your level 3 correction doesn't remove the wheels? Even don't bother lifting the car to clean the wheel wells..Sorry great work but don't call it level 3..

@TopazDetailing

Жыл бұрын

That’s what’s included with our level 4. All service levels are spelled out on our website

No interior work ? That’s lazy

@TopazDetailing

Жыл бұрын

We did a thorough interior detail however unfortunately there wasn’t time to capture it on camera

For these prices I expect wheels to come off and arch liners done !! And who has this sort of money for a car being valeted

p̶r̶o̶m̶o̶s̶m̶

Great detailed video as always ❤️ btw which brand compound and polish do you guys use!?

@hashaampiracha3712

Жыл бұрын

Brand for company and polish don’t really matter. It’s all about technique, if you want some full proof compounds and polishes try out RUPES