Fixing The Annoying Suspension Noise In Your Honda City 2015

Автокөліктер мен көлік құралдары

Honda City 2015 Suspension Noise Fix + Fan Motor Replaced
So this subscriber came to us with a lot of noise in his 2015 Honda City's suspension. After checking we found that almost all the suspension parts were worn out and needed to be replaced. this was the first time this car was getting its suspension fixed since it was bought back in 2015. I think its enough that the stock suspension lasted 8 years and over 1 lak kms.
After checking the suspension we found that we would have to replace its shockers, mounts, link rods, jumping rod bushes, control arms and a radiator fan motor.
#city #suspension #honda
Connect with me-
Instagram- @nklkhanna
Facebook / nklkhanna22
Snapchat- @nklkhanna
Contact No.- 8882237347
For Business/Colab Inquiry- whatsoeverin@gmail.com
Garage Location & Contact Nunmber-
+918882237347
Tuesday's Off

Пікірлер: 44

  • @eddy9881
    @eddy98815 ай бұрын

    Hi Nakul, I have 2011 city, driven only 60k kms. In the last service, honda mentioned suspension is weak. What shall I do?

  • @sahilkshah1
    @sahilkshah18 ай бұрын

    HI Nakul, i own a 2010 honda city V manual. Can you suggest me a good third party brand for clutch set, pilot bearing and clutch plate. i have heard alot about exedy. is it a reliable brand? or would you sugget a different brand?

  • @shreyeshmb1302
    @shreyeshmb13027 күн бұрын

    Kitna cost padha aur kaha se order kar sakte hai yeh parts? Please help..

  • @dhawalsinghrawat8582
    @dhawalsinghrawat85829 ай бұрын

    hi nikhil, FOR SUSPENSION SET except the honda brand which aftermakerket brand is trust worthy ....gabrial or monroe? thank you.

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    I personally trust monroe

  • @adnanshaikh7451
    @adnanshaikh74514 ай бұрын

    What will be the cost of all the suspension related spare parts (genuine honda) for honda city ivetc 2013 V AT model

  • @nklkhanna

    @nklkhanna

    4 ай бұрын

    Same as Honda service centre... Should be around 40-50k

  • @VishalSharma-gm5gj
    @VishalSharma-gm5gj9 ай бұрын

    hi, nice content. just wanted to ask my honda city 2017 petrol makes weird noise on turning on the ac. What shall i do? is it worth to replace the compressor or it can be repaired and work fine? ac cooling is normal

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    It could be the bearing... There's always a risk of it failing once it starts making the noise. Same thing happened with this client, i warned him about it and his compressor stopped working while he was on a road trip with family. There are 2 options- 1- change the bearings, but there's always a risk of damaging the compressor neck while doing that. 2 out 10 compressors don't survive. But if its done then the whole thing can be sorted for about 5-7k 2- 2nd option is the last option which had to be taken either now or later, that's changing the compressor.

  • @VishalSharma-gm5gj

    @VishalSharma-gm5gj

    9 ай бұрын

    Quite informative@@nklkhanna Thanks. Will see how much it lasts. :) Thanks again for your prompt response! appreciate that.

  • @tousifkhan1924
    @tousifkhan19249 ай бұрын

    which brand link rod is being used?

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    TRW

  • @omkarb33
    @omkarb339 ай бұрын

    Does it make sense to buy 2014-15 Honda City diesel?

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    No, if you live in NCR

  • @arpitvars3140

    @arpitvars3140

    8 ай бұрын

    What if its petrol model vmt ivtec

  • @nklkhanna

    @nklkhanna

    8 ай бұрын

    @@arpitvars3140 then you can

  • @arpitvars3140

    @arpitvars3140

    8 ай бұрын

    @@nklkhanna can i trust it for its reliability? And what would be maintenance cost associated

  • @proudtobeanindianmuslim2645
    @proudtobeanindianmuslim26459 ай бұрын

    Hi

  • @abhijeetpatil4651
    @abhijeetpatil46513 ай бұрын

    Hi sir, I am having cracking noise while getting down from speedbrakers from front wheels of my honda city 4th gen 2018 model. Cracking sound pattern which i observed while getting down from speed breaker as below: 1) when I press my clutch free the car then sound can be easily audible 2) when I dont press the clutch then sound is barely audible. 3) When I keep car in bit acceleration then I dint hear any sound as off now. I took car to mechanic and he said it is due to Suspension or may be due to some bushes.. Then I decided to change the suspension and below parts we replaced. 1. Front shockup refill. 2. Shocker mounts 3. Front strut kit 4. Strut wati 5. Link Rod 6. Balance rod bush. 7. Steering rack repair with bush. Also as per mechanic there is not issue in lower arm and its ball joint or bush. All above parts are original from honda. Dispite of changing entire suspense system and other things, still cracking sound is there... Pls help me to identify from where it is coming... Thanks in advance..

  • @nklkhanna

    @nklkhanna

    3 ай бұрын

    Can't diagnose a problem without getting patient to the hospital and a car to the garage

  • @abhijeetpatil4651

    @abhijeetpatil4651

    3 ай бұрын

    @@nklkhanna ha ha ha.. thanks for replying... The garage is too far from my location.. ,,,😀

  • @jyotiprakashdas4429
    @jyotiprakashdas44299 ай бұрын

    Bhai . Recently Amaze lia hai maine ek shal pehle.. Agar koi b dikkat ati hai gadi men , aftermarket parts miljaega iska? (Just lyk Maruti Suzuki) ya phir bas honda service centre ee lena padega?? Mujhe swefice centres jane ka mann nahihai coz they charge like whatever they want Nd labour charge b mann iccha lete hain .. so can i service my amaze outside after 2yearswarranry is over???

  • @ParthMaru11

    @ParthMaru11

    9 ай бұрын

    mill jayenge parts don't worry

  • @jyotiprakashdas4429

    @jyotiprakashdas4429

    9 ай бұрын

    @@ParthMaru11 ok bhai .thanks batane ke lie😊

  • @prmrlxmn
    @prmrlxmn9 ай бұрын

    Honda city is having Munjal Showa shocker .

  • @proudtobeanindianmuslim2645
    @proudtobeanindianmuslim26459 ай бұрын

    I m Honda wr v owner. Honda ke genuine parts Kahan se milenge??

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    Spare parts distributors

  • @saadmiyan7545
    @saadmiyan75458 ай бұрын

    bro does 22k include only labour, or including parts cost

  • @nklkhanna

    @nklkhanna

    8 ай бұрын

    Everything.. parts and labour

  • @18tanmay
    @18tanmay9 ай бұрын

    Hi nakul, from where do you buy genuine honda parts? They are not available online or boodmo.

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    We have our own suppliers

  • @18tanmay

    @18tanmay

    9 ай бұрын

    @@nklkhanna can you please give me their contact info. Need to buy some items for my honda city also.

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    @@18tanmay sorry that can't be done. We spent years making these connections. Plus they won't even entertain normal one time buyer.

  • @18tanmay

    @18tanmay

    9 ай бұрын

    @@nklkhanna never knew honda spare parts need to be scored like drugs 😂

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    @@18tanmay hahaha... Which parts you need ? And where are you from ?

  • @anujsharma5961
    @anujsharma59619 ай бұрын

    Honda city just oozes quality, at 112k it's hardly broken in.

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    Hahaha depends on owner to owner, also on what kind of roads you drive on.

  • @tarunsharma5254
    @tarunsharma52549 ай бұрын

    Instead of replacing bushes and ball-joints..You simply replaced whole lower arm..Simply rip-off to any customer who visit your garage

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    Replacing bushes works... Replacing ball joints in arms don't usually works well and can lead to play in the joint of arm and Ball joint. That's the reason why the company also replaces the whole arm. We at least change bushes when ball joint is fine, in company they change the whole arm even if only bushes are worn out.

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    @@almondnine exactly!

  • @thakurshubham2766

    @thakurshubham2766

    9 ай бұрын

    Ball joint is working fine in this one it should always be this hard. What a scam

  • @nklkhanna

    @nklkhanna

    9 ай бұрын

    @@thakurshubham2766 it should be hard but not this much hard... Should move with smoothness, It shouldn't jerk while moving... But this one was. Plus when the client asks you that there shouldn't be even slightest noise remaining then it's necessary to change

  • @vinodsao4465

    @vinodsao4465

    4 ай бұрын

    Yes right, bush and ball joint both are replaceble, no need to change complete arm.

Келесі