Fixing Limp Mode on 2005 Mercedes C230 Transmission (easy Fix)
Автокөліктер мен көлік құралдары
Fixing Problems on Mercedes is expensive but it doesn't have to be because you have me. I managed to fix my sister's Mercedes transmission when she experienced the famous Limp mode on her Mercedes. I replaced the conductor plate on her transmission and it fixed the problem.
conductor plate kit:
www.fcpeuro.com/products/merc...
T30 socket:
amzn.to/3IC5Eof
amzn.to/3BXsWkG
Merch Store:
SimplyMerchStore.com
------------------------------------------------------------------
Camera Equipment:
gopro: amzn.to/3BdalRi
gopro media mod: amzn.to/3Mc6Oc5
sony a6600: amzn.to/3HXs8j1
sony a7 iv: amzn.to/3pt4mW1
sigma 16mm f1.4: amzn.to/3Mc9S85
Rode wireless go II: amzn.to/42Bt1Wk
Rode micro mic: amzn.to/41o0ToA
Please check out my other channel:
Simply Tofu
www.youtube.com/ @SimplyTofu
If you like this video Please Like, Share, and Subscribe.
Instagram: / simply_mod85
#mercedes #transmission #diy
Пікірлер: 31
Thank you. I don’t know what I’m doing but I’m about to fix up a (or try) 1999 c230 with limp mode on. I’m picking her up tomorrow and I’ll tell you this video help me out esp with no experience. I do have people who know about cars they are my plan B but this video has nice clear details that made me understand a lot of what I’m doing. Subscribe
@ogclassicjones332
8 ай бұрын
How did it work out for you?
Hi, I enjoyed this video, very informative. Can you kindly let me know where are you located
Great video! Did you have to erase any codes to get the car out of limp mode? Or did you just remove and replace? Thanks!
@SimplyMod85
Жыл бұрын
we did the replacement and cleared up any codes that were in the system. I don't think you need to clear the codes to get out of limp mode. Before we replace the conductor plate, we would just turn off the car and wait 3 min and start it up to remove the limp mode.
@davidseo5591
9 ай бұрын
Hello Do I need to do the program after replacing the conductor plate with a new one, or do I already have the program in the new conductor plate What should I do if I have to do a program?
This is for the 722.6 5-Speed. 2005 C230 should take ATF 134 (Red) NOT the (Blue) 134FE. 134FE is for 2010 and later models which were specifically designed to use the lower Viscosity oil transmission fluid. The 722.9 7 speed is completely different.
@Hroch08
Ай бұрын
so whats the fix for the 722.9 7 speed
What was the codes that were showing up that made sure it was the transmission plate and not something else causing it to go into limp mode?
@SimplyMod85
Жыл бұрын
I forgot what the code was but basically the car won’t shift past 2nd gear and limited to only 40mph max. We tried a bunch of things but didn’t make the limp mode go away so our last resort is to replace the conductor plate and that fixed the issue.
@Frankie_Freedom
Жыл бұрын
@@SimplyMod85 gotcha gotcha. Thanks
@john7059
Жыл бұрын
I think it might be p0717 & p0718
@dominicwild3189
6 ай бұрын
Thanks for video. There could have been many other reasons for limp mode, I believe you were lucky to have picked the correct one?
Hallo Danke für Video Wie viel Liter Öl hast du eingefüllt? Dank
where can I find the proper fill procedure for this transmission? How long do you have to have it on before checking the H on the transmission dip stick?
@SimplyMod85
10 ай бұрын
I am pretty sure you can find it in the manual or online forum. I just fill it with all the fluid that comes in the container in the kit. I know this is not proper. sorry if this is not of any help.
If you're just changing the connector plug on the outside of the transmission, do you need to drain the fluid?
@SimplyMod85
10 ай бұрын
No you don’t
I am the owner of Mercedes-Benz e320 year 1999 V6 engine assemble in Canada. I am having transmissions issues. I would like some advice on the way forward with the transmission repairs.
so what happens if the problem limp mode is still present?? What is the next step.?? I have changed the conductor plate and all solenoids all brand new!! problem is still there!! Any tip would be a big help!!!
@anndrew7958
5 ай бұрын
could be abs / speed sensors in the rear wheels, my e240 2005 mechanic dictated that its speed sensor in rear left wheel
How much transmission fluid litter you put ?
@SimplyMod85
Жыл бұрын
I used the whole bottle, so about 5L.
I think there you miss a screw, at the center hole. 17:37
Car needs to have a scanner that can reset the transmission control module or it will stay in limp mode
@bekabeka71
6 ай бұрын
How is that possible? Can a limp mode be resettled virtually?
@rayharmacinski4934
6 ай бұрын
@@bekabeka71 the sensor has to be reset. many sensors on a car have to be reset via a scan tool. In fact that's how you can tell if you fixed a problem (or not) if the code reappears after the code has been cleared
@bekabeka71
6 ай бұрын
@@rayharmacinski4934 so what’s the first first? Plug it in and see the codes first before change the whole gearbox?
I NEED HELP !!
I’ll pay you to do mine
Umm,umm,umm,umm,ummmm,uuummmmm