Fixing a Jeep ABS / Traction Control / ESP BAS Light - Time for a Wheel Speed Sensor - Fault C100A
The Jeep decided that it needed some attention and turned on 4 warning indicators - Traction Control, ABS, ESP BAS, and the Service 4WD System message! Also, it won't let me turn on cruise control! That is a pretty big list of faults. Time to find out why! Follow along as I show how to fix this issue.
This particular Jeep is a 2006 Grand Cherokee Limited with the 5.7 Liter V8, but it also works on the V6 model and many other years. You may need a different wheel speed sensor than the one I show here, but call your local car parts store and they can help you get the correct part.
To diagnose this problem, I am using the "AlfaOBD" app paired with my OBDLink MX+ reader. You can find the "AlfaOBD" app in the play store (only available for android at this time), and you can find the OBDLink MX+ on Amazon.
The AlfaOBD app indicuated a fault C100A which is a faulty left front wheel sensor. Since it did all the hard work of figuring out which sensor is bad for me, let's get a new one and get it installed!
Thank you so much for watching. We really appreciate all of our viewers and subscribers!
Reference:
ABS - Antilock Braking System
ESP - Electronic Stability Program
BAS - Brake Assist System
Note - your vehicle should only be serviced by a licensed repair facility or by the dealership.
Пікірлер: 122
I was afraid this repair would be a pain, but you presented it as more straightforward than I thought. Thanks for the video!
@3DayWeekend
2 жыл бұрын
You're welcome! Thanks for watching!
@user-qt3ib4gr9o
9 күн бұрын
@3DayWeekend hey did your Cherokee have like a clunk sound when starting to take off also had to hit the brakes hard and now same lights on and an odd clunk
Great step by step instructions for this repair. My Jeep SRT8 just did this and I’m glad I found this video.
@3DayWeekend
2 жыл бұрын
Glad it helped! Thanks for watching!
The same happened with my 2006, V8 4.7. And it was resolved by changing the abs sensor, as you explain in your video. I also had another problem, indicating "4wd system service", which I solved by simply removing the corresponding fuse, starting the engine, replacing the same fuse and restarting the engine. And the problem disappears. I believe that by doing this I applied a reset to this system. Thanks e Regards from Brazil.
@3DayWeekend
24 күн бұрын
Terrific! I have also experienced the "Service 4WD System" error, and was able to resolve it by pulling a fuse. It was in this exact same Jeep! Been working great since though, so here's hoping it was just a fluke. Thanks for watching all the way in Brazil!
You nip it right in the butt. Thanks for the demonstration. The deal wanted to charge me $500 just to do this job. The part for me only cost $29 with life time warranty, at auto zone. I will do it myself. Thanks again for the tip. You rock. 👍
@3DayWeekend
Жыл бұрын
Happy to help! Thanks for watching!
That was exactly what I said!! ALL THE CHRISTMAS LIGHTS ARE ON!!!! Great video!!
@3DayWeekend
11 ай бұрын
haha yes! Thank you for watching!
Great video and easy to follow instructions. Was able to clear this fault code and move on to other projects. Many thanks!
@3DayWeekend
2 жыл бұрын
Glad it helped!
Thumbs up buddy. You earned it. About to buy used 2006 5.7l hemi, ridiculous low k’s (miles), great condition but with esp bas and track control lights on. Will now buy 👍
@3DayWeekend
Жыл бұрын
Good deal. Hope it works out for you! Thanks for watching!
❤❤❤thanks for sharing. Only problem I had was you fumbling with your light. You need harbor freight magnetic slim light. But everything was good
@3DayWeekend
8 ай бұрын
You're welcome. Yes, always fumbling around with lights! I have a new camera light that seems to be working pretty well so far. Thanks for the suggestion and for watching!
Nice Jeep. I even like the color. I hope you keep it. Some have been dumping them instead of fixing them.
@3DayWeekend
9 ай бұрын
Thanks! I've had it 4 years and intend to keep it as long as possible. It's the winter Jeep (to keep the wife's Commander away from the salt) so eventually I will lose the corrosion battle, but I'll do everything I can to keep the wheels turning until then!
Nicely done...
@3DayWeekend
17 күн бұрын
Thanks!
You didn't have to repair all of them. It's an electrical problem. Same thing happened to me when I replaced the alternator. Somehow the new alternator was bad. Drained the battery and all the lights came on at once. They couldn't all be bad at the same time.what are the odds they all fail simultaneously. Lol slim to none. And they weren't on before. Update just changed my alternator and now all 3 lights gone. Woohoo. Winning.
@3DayWeekend
Жыл бұрын
I'm glad you were able to fix yours with the alternator, but that was not the case for me. With low voltage, the ABS computer will go to a fault state, and all of those lights will come on, as they all depend on the ABS computer to function. In my case, however, the ABS computer was online, but could not see the front left wheel speed. Due to this, it must throw a code and go to a fault state, which illuminates the lights for all of those systems. Once I replaced the sensor, the ABS computer could see the left front wheel speed again, and came out of its fault state which re-enabled all the other systems and all the lights went out. 2 different solutions to 2 similar issues! Excellent pointer though, as voltage would be something to check before digging into wheel speed sensors. Thanks for sharing!
Nice explanation on the job..
@3DayWeekend
5 ай бұрын
Thanks! Hope you found it helpful!
Great information and thanks so much. I have the same problem with my 2002 jeep liberty. Speed thermometer is not working nor the cruise control.
@3DayWeekend
Жыл бұрын
Glad it helped. Thanks for watching!
Thanks for the Video just happened to my 06 srt I hope this is the issue
@3DayWeekend
2 жыл бұрын
I hope so too! Thanks for watching!
@nachoarroyo5304
Жыл бұрын
Any updates ? Same year srt and have this issue, thanks.
@rubengonzalez7158
Жыл бұрын
@@nachoarroyo5304 yea I ended up changing the transfer case cost me around 4K new it was setting it off when the flushed the fluid my case was dropping metal bits and it’s not running rough that and a wheel alignment plus the steering wheel was off as well
Excellent video
@3DayWeekend
Жыл бұрын
Thank you very much!
Nice job, I have an 08 that keeps kicking in the anti-skid. After that happens, I can only go 20 M.P.H.
@3DayWeekend
Жыл бұрын
Thanks! I hadn't heard of it getting that bad, but hopefully that was your problem and you're back on the road!
What is the brand of your vehicle lift? Looks pretty sweet. Also, thanks for a well done video.
@3DayWeekend
2 жыл бұрын
That is the Dannmar MX6. I did a video about it back in my early days. It has been a game changer and I would highly recommend it if you are cursed with low ceilings like me. Thanks for watching! Here's the video: kzread.info/dash/bejne/n4eTqMSDY7jAmbw.html
Hey i like your screen in the middle my 06 grand cherokee jeep limited 4.7 V8 doesnt have that but anyways when i turned on my jeep it showed the same lights as your dash and when i turned i off and turned it back on it still showed the lights and i turned it off waited like 10 to 15 mins and turned it back on the lights was still there so i put it in Neutral and then pulled up 4wd and then the 4wd turned off and the other lights as well should i have not done that? Oh and btw when i got my new tires and alignment done the guy said i need new tire sensors is that why the lights turned on?
@3DayWeekend
2 ай бұрын
Thanks! I also like the screen. After replacing a wheel sensor, the vehicle must be moved for the ABS system to see the new sensor and clear the light. The tire sensors are just for your tire pressure monitoring system. That's a different light, and you'll get a message on your speedometer screen saying "Service Tire Pres System".
@tesathompson35
22 күн бұрын
Hi I'm having the same problem with my grand Cherokee I have the same one as you.when I drive the truck clucks every now and then on and off.i was told I need what he brought and that will stop and all them lights will go out.did yours do that
I was told this is what i need all the same light are on in my grand Cherokee 5.7 L 4x4.because mine is bad.my truck is clicking and clucking while im driving on and off.is that supposed to do that .
@3DayWeekend
17 күн бұрын
It is possible that's all you need, if your describing the sound of the ABS and/or Traction Control System activating. If a sensor is faulty, it can sometimes make the computer think a wheel is going the wrong speed, and the ABS/TCS will attempt to slow the other wheels.
When all these lights were coming on your dash, were you also getting a mechanical grinding sound? You know like the anti slip trying to brake or shift traction to another wheel?
@erickaerickson3080
Жыл бұрын
You might be needing a wheel bearing , grinding noise can be a sign for that especially if it’s slipping cause one’s going faster than the others
@3DayWeekend
Жыл бұрын
I didn't, but it does happen. If the wheel speed sensor is reading a speed incorrectly, the ABS system will interpret that as wheel slip and will try to engage. This is typically more prevalent at very low speeds - like when you're almost to a complete stop.
@byronarriola4304
Жыл бұрын
Both of you were correct, I separated the CV axle from the wheel hub and the bearing was oozing grease that turned into almost hard candle wax texture. I replaced the hub and steering knuckle with a new bearing installed because it was cheap online. Also replaced the ABS sensor because something was rubbing on it. I reset the stored ABS code with a scanner that has ABS system accessibility and the problem went away.
@erickaerickson3080
Жыл бұрын
@@byronarriola4304 Great to hear! It seems like this year a lot of people have big time vehicle issues
@byronarriola4304
Жыл бұрын
@@erickaerickson3080 we get nasty winter cold weather here, and all the gremlins in the cars around here start to come out and create nasty breakdowns lol. Thank God for KZread and people willing to share knowledge.
Thanks for the video. I have a Jeep Grand Cherokee 3.0 CRD 2005, U140c, after replacing the sensor, everything is OK, but the U140C fault cannot be cleared through diagnostics. Why can't u140c be deleted from the car's control unit even after a successful repair? Thank you for your response
@3DayWeekend
Жыл бұрын
As long as the light goes out, you're good. If the light doesn't go out, it's still unhappy about something in that right rear wheel. If the light goes out but the code stays, you're fine. It'll just take a predetermined number of drive cycles for that old code to go away on its own. Some of them take as many as 50 drive cycles for the old codes to clear.
I got the same lights on as you but my Speedo doesn’t. Work did your Speedo work with those lights on?
@3DayWeekend
Жыл бұрын
Yes, my speedometer did work. Sounds like you have a different sensor/sensors causing your issue. I believe there is a vehicle speed sensor on the transmission which would be tied to your speedometer. If that is faulty, it would probably throw all these same lights. I could be wrong, but that's where I would start.
Alpha OBD is so important to have if you want to do your own repairs. It told me which abs sensor was bad just the other day on my 06 WK GC. Ordered a new one for an easy fix by the look of it. How do you like your Wild traks? I used the Alpha OBD to adjust the speedo too when i put a set of 245/75R /17 Wild Traks on my GC. 31" tyres instead of stock 29" + Inch and a half lift too. Also tells me which glow plugs are faulty, Extremely helpful.
@3DayWeekend
11 ай бұрын
AlphaOBD never ceases to surprise me. Had to replace a tire pressure sensor and after I did, the service tire pressure light came on. Forums say it has to go to a dealer to have the new sensor programmed into the SKIM. Fired up AlphaOBD, found the option, and programmed it in myself! Love it! Those tires have been EXCELLENT. They are a little aggressive so there is some tire noise, but they ride and wear really well. I liked them so much, I got another set for the wife's Commander. Very pleased. When they wear out, I'll be getting them again for sure! Thanks for watching!
This is exactly what happened to me but I wasn't able to dig out the broken speed sensor inside the hub. Cue up a new front hub...
@3DayWeekend
11 ай бұрын
Ugh, I hate that. Really hate the design on that one. I feel your pain, had to change one on the wife's Commander a few weeks ago. Nothing wrong with the hub, other than the ABS sensor was stuck in there! Thanks for watching!
I have a '06 Overland. Cruise works, till I use brakes, to make a turn, then I loose Cruise. Or if I use the Decel to many times. I loose the Cruise control. Then when I restart My Jeep OverLand again, I will get Cruise back. So, will this help my situation?
@3DayWeekend
6 ай бұрын
If your ABS light is not on for this code, then this fix will not have any effect. Purely a guess, but perhaps there is an issue with the button assembly itself? I'm pretty sure those buttons all go on the CANBUS, so if there was a problem with the button assembly, a reset would get it working again. I could be wrong, but if it were mine, I'd probably start there. Hopefully you're able to get that resolved! I would find that problem very annoying!
Would you happen to know if the connector for an 07 Compass is as easily accessible as this? The wire goes through a clip in wheel well I have yet to remove. Could I get that lucky?? Had to replace the front wheel hubs and bearings and the driver's side sensor was too corroded to come out cleanly. It broke. Thanks for a great video.
@3DayWeekend
4 ай бұрын
It has been a while since I worked on a Compass, but I do recall the connector was right up front, similar to this Jeep. If I recall correctly, it's right behind the inner wheel well. Shouldn't be too hard to get to. Glad the video helped! Thanks for watching!
@billyrawlings6691
4 ай бұрын
Thanks for the reply and I actually found it. All you have to do is remove the air box and the connector is easy to get to under the hood. Again, your video is very helpful. Thank you.
11:00min Good Boy, going for a ride!! What kind of spray did you use to loosen that bolt in the wheel hub ? Thanks!
@3DayWeekend
3 ай бұрын
Haha yep! I use PB Blaster for that. I hope you found the video helpful, and thanks for watching!
This goes same for a Jeep Commander 2007 right?
@3DayWeekend
24 күн бұрын
Yes, the two are pretty much identical other than the bodies.
I have a Jeep Patriot 2014, my ESP light is on and won’t go away and the car struggles and dies once i give it some revs, the car has been in the garage and haven’t been able to drive it. Any chance you would have an idea how to fix it? Can’t find anything on KZread, just trying my luck to fix it myself before i take it to a mechanic. From Australia
@3DayWeekend
Жыл бұрын
Just the ESP light? It shouldn't have issues running with just the ESP light, as it is a completely separate module from the engine computer. Perhaps that is a byproduct of some other issue, or an additional issue. I'm suspecting your engine computer will show you some other issue. Alfa-OBD is your friend for troubleshooting. Just like the Check Engine Light, the ESP light could be on for many things. You'd have to run the diagnostics to know for sure. Sorry I can't be of more help.
IF THE FACTORY WOULD JUST PUT THINGS TOGETHER WITH ''NEVER SEIZE'' MECHANICS WOULD RAVE ABOUT THOSE BRAMDS THAT DID...
@3DayWeekend
2 жыл бұрын
That would be a dream come true!
I have this on my 2008 Jeep GC CRD diesel. All of these lights came on, as well as it’s saying “4 LO” in middle. And it won’t shift now and i can’t get that 4 LO to go away. Any insight ? Randomly happened. I’m stumped
@3DayWeekend
Жыл бұрын
That doesn't sound good.... I'd try a reset first (disconnect the battery, touch the leads together, wait 30 seconds, reconnect). Hopefully that would clear enough to get it rolling, but a code reader should tell you the root cause of the problem.
@iiatargetanalyst3046
11 ай бұрын
You need to replace transcase front and back axle, fluid with Synthetic- 4 fluid ( it's usually transmission fluid, or similar, oil, you have to do your own research, if your a diy) All AWD or 4x4 require flush and replace fluid every 30,000 miles. It takes 2 quarts per /f/b axle to fill transcase. Stay safe
How do you know which sensor is out?
@3DayWeekend
3 күн бұрын
I used the AlfaOBD app paired to an OBDLinkMX+ to read the ABS module codes, which told me which sensor it was. Any repair shop or Autozone should have a reader that can pull codes from the ABS module. Hope that helps!
So I changed everything read and front sensors I tested the cables if they had power running through out the system and I still get the lights turn. On
@3DayWeekend
2 жыл бұрын
Sounds like you may have a completely different issue. Be sure to check the ABS module fuse as well. A code reader such as AlfaOBD, a local repair facility, or the dealership will be able to read the ABS codes to pinpoint your issue.
@NoneofurbusinessFU
Жыл бұрын
Same. We had to replace the ECU and that fixed it
Could u help me fix mines where are you located
@3DayWeekend
2 жыл бұрын
I'm sure you can do it! They aren't that bad. Thanks for watching!
I just cleaned my full throttle on my Jeep Compass and the electric stability control came on. Help 😅
@3DayWeekend
Жыл бұрын
That's odd. You wouldn't think those two systems would be related! The Compass is a bit different than the Commander, so I'm not really familiar with them. Maybe disconnecting the battery would be a good place to start?
I've got the same thing, the same three lights. Is it dangerous?
@3DayWeekend
6 ай бұрын
That's a tricky answer. Here it goes: It won't cause mechanical damage to the vehicle, however, several safety features of your Jeep are currently disabled. If you found yourself in a scenario that required emergency braking or a quick steering maneuver, your braking and stability assists would not engage which could result in an accident. ABS - your tires would lock up under full braking, resulting in a loss of steering. ESP/BAS (Electronic Stability Platform / Brake Assist System) - in an emergency steering scenario, the stability control would not function, which could allow the vehicle to fish-tail resulting in a loss of control or it could even flip over. BAS works with ABS to shorten your stopping distance. I would recommend fixing it as soon as possible from a safety standpoint, but mechanically no additional harm would be done to the vehicle by delaying the repair, provided the light is on for only a faulty wheel speed sensor. Hope that helps!
Hello. I had the same exact issue with my '08 Jeep Commander, replaced the wheel speed sensor, still lighting up just like yours. Thoughts?
@3DayWeekend
Жыл бұрын
Make sure you check the codes to find the exact cause of your issue. Mine said it was the front left sensor, but there are 3 other sensors it could be, or it may be a different problem that doesn't involve the wheel speed sensors at all. The ABS unit could be faulty, or you could have a broken/corroded wire or connection too. Definitely have someone run the ABS codes and go from there.
I have them Same tires on my wk 32s
@3DayWeekend
2 жыл бұрын
They have been a great tire!
What spray did you use?
@3DayWeekend
2 жыл бұрын
PB Blaster
I have the same exact models as urs but my engine size is 4.7 v8 , those kept popping on and off but shifted great still but when I got to point B for where I was going and on my way back to point A it started going into limp mode and kept flashing traction control , and for some reason it’s able to shift like it usually does but sometimes I’m able to go to 40-60 at times then flashes those codes and then goes to limp mode again and does the traction control flashing when it happens , the alignment is great still nothings burning for oil and everything runs like it’s supposed to and this never happened before , is it the wheel speed sensor ?
@3DayWeekend
Жыл бұрын
These wheel speed sensors should not put the vehicle in limp mode. I would highly recommend taking it to a shop and having the ABS system and TCM (transmission control module) scanned for codes before trying to put new parts on it. (Autozone and other chain scan tools can't scan the transmission or ABS computers) Hopefully something is amiss with the ABS that is telling your TCM to go to limp mode, but I would suspect an issue with the transmission which could disable the ABS system in limp mode. Sorry for the bad news. Best of luck to you!
@erickaerickson3080
Жыл бұрын
@@3DayWeekend Yeah i found out what it was , so like several months ago i got spark plugs from oreillys gave them all the right info as well like all the info they need for it , and turns out they gave me the wrong dang spark plugs this entire time, i needed spark plugs that were copper , my vehicles been in the shop since like november 22nd as soon as that started happening , and it was also my wheel bearing, had to pay $670 after it got done
What brand radio and could you leave a link to it? And install video? Thanks for this video also 👍🏽
@3DayWeekend
2 жыл бұрын
That radio is a Kenwood DMX7706S. I put it in a few years ago and it is already outdated! Crutchfield is your friend. Run through their wizard and they will tell you what you need and send you the instructions if you need them.
What does it mean if you have these 3 lights plus a dinging noise?
@3DayWeekend
2 жыл бұрын
Mine did a single ding when these lights came on, and this was the fix. If you don't have the readers, I would recommend taking it to a shop that can read the ABS module codes, and it should tell you what the problem is.
@melaniecummings14
Жыл бұрын
wheel barring?
🌹🌹🌹🌹🌹👍👍👍👍👍👍👍👍👍👍Thank you from Saudi Arabia,
@3DayWeekend
Жыл бұрын
You're welcome! 👍 Thanks for watching!
Thank you 🙏
@3DayWeekend
Жыл бұрын
You’re welcome 😊 Thanks for watching!
How do you fix a C2200?
@3DayWeekend
Жыл бұрын
Oof. That's a bad code. Typically that means a faulty ABS module and the whole thing will need to be replaced. Sorry!
I just got this error... same wheel... reading the service manual it just says "remove sensor", great i think, easy!, but lacking details.... so i found your video and... the brake rotor has to come out?!?!,.. motherf jeep....
@3DayWeekend
2 жыл бұрын
Yeah, the rotor does need to come off, but I've had other vehicles where the sensor is built into the hub and is not changeable, meaning you need to replace the hub just for a bad sensor. Fortunately this one is replaceable! I'm willing to call it a fair compromise! Thanks for watching!
@gglovato
2 жыл бұрын
@@3DayWeekend it makes it a PITA to interchange left/right to troubleshoot
Whats the name of the scanner you use ?
@3DayWeekend
Жыл бұрын
That's the OBDLink MX+ bluetooth adapter paired to the AlfaOBD app on my Android phone.
Can you still drive
@3DayWeekend
9 ай бұрын
Yes, the Jeep was still drivable with these warning lights, but obviously several of the safety systems were disabled so it is not recommended.
...check gas cap 😅
@3DayWeekend
Жыл бұрын
Haha yes. I wish it were that simple! :-)
changed the whole bearing with sensor, lights still not gone out.
@3DayWeekend
2 жыл бұрын
Bummer! You may have a problem with the the plug itself or the wiring. I've seen where moisture has gotten into the plug and the pins are covered in corrosion or completely missing!
@briansawyer3232
2 жыл бұрын
I think the wording is wrong here on the video? Maybe not? So there’s a “speed sensor” and there a “ABS wheel speed sensor” I think you would want to replace the ABS wheel speed sensor but not 100% I just bought a car today and having the same issue but thought I clarify that for you.
Give the music a rest buddy....
@3DayWeekend
5 ай бұрын
I definitely used a lot of music in my early videos, but I don't really use any at all these days. I've changed the way I edit videos so there isn't any "dead space" where I would feel obligated to use music. Always trying to improve. Thanks for the feedback!
No testing? Nice 👍🏻 😂👎🏻
@3DayWeekend
2 жыл бұрын
No need to test. C100A - front left wheel speed sensor. Swapped it out and problem solved! Had the light stayed on, more testing would have ensued, but it was good to go!