You posted this on KZread just for me 11 years ago thank you my good sir

Cool video dude. This is what KZread was supposed to be all about

Thank you so much. An easy to follow and understand tutorial. I will never need to buy another one. Can order whichever part and fix it myself.

Great tutorial! I wonder if the oil I use on my sewing machine would work?

Thank you. I made a list of what you need. 7mm socket Flat head screw driver 14 mm socket long one Phillips head SD 8mm socket Plyers or crescent wrench Grease WD40

@uniontank7125

7 ай бұрын

I came to comments before watching video just for this, a list of tools needed ,thank you love.

Thanks for the video! I know just taking Q tips and cleaning it and adding a bit of grease can help alot.

Thank you so much around here they go for 40 dollars. You just save us 40 dollars

Great video, I wouldn't have thought about attempting this without watching this first, I would have just bought a new one. This is going to be quite a project, I suck at this kind of stuff, guessing it will take me three hours with some hiccups along the way. I need a cigarette now! 🚬🚬🚬

@RayFixesAll

Жыл бұрын

It's not that hard just do step by step with the video just keep it in pause after you take a piece off

@sir.richardarmstrong3rd759

Жыл бұрын

I also was about to go buy a new on too. I’m glad that I came across this video.

I can see a distinct advantage of greasing this machine before you use it for the first time so it has never been run dry. And then just maintenance after that. Thanks for the video.

Thank you so much my machine was hard to work and only wrote half a cigarette I disassembled it as you showed greased it up and it works perfect just like brand new

@RayFixesAll

2 жыл бұрын

You're welcome glad it helped

Very helpful vid, just disassembled my topomatic t2 and after some greasing up it feels just like new 👍

@RayFixesAll

2 жыл бұрын

Cool yea they need it every once in awhile

amaing and creative ，smart！i never kown this good idea before， you open my mind！

Thank you, this was what I needed to know

I use tri-flow so it doesn't. Go up. So I sprayed down with. Triflow and then I take my blower and blow it all dry. And it works beautifully.

Thank you what kind of grease do you use and where do you get it

@RayFixesAll

3 ай бұрын

The grease I use I got at Walmart it's just all purpose grease it's the cheapest one on the shelf in automotive

19/5000 Nueva máquina de cigarrillos de gran potencia JOUGE de doble uso grueso y fino

JUST WHAT I NEEDED! Got an older one that is twisted. Two corners touch, then wobbles. It will work. But the throw and piston is very hard. The cutter works, should I try to twist it back to level? A response will be highly appreciated.

@RayFixesAll

Жыл бұрын

I would only try to bend it back if you get it soft with a propane torch first so the metal doesn't snap

I guarantee if I try to do this, I'll have extra parts left over. No joke!

@RayFixesAll

Жыл бұрын

Lol

@pattiannepascual

10 ай бұрын

🤣 you should see how many parts vcr player machines don't need to work.I have taken many apart and each time have like 20 little things left but machine works great after.

How often would you need to sharpen the blades that cuts up tobacco? Bc in order for me to not have gapping problem in the cig tube I have to work the handle several times to cut/compact the tobacco.

@RayFixesAll

2 жыл бұрын

I never sharpen that I sharpen the serrated poker points

@ScottyDoesntKnow69

2 жыл бұрын

@@RayFixesAll what do you use to sharpen the serrated points? I’m guessing you mean the points on the piece that shoots out the side of the T2?

@whenindoubtmutemyownmouth5180

Жыл бұрын

Might be a spreading problem, what I've done with mine is I take the plate off of it and use the short tubes usually compacts them well, If I get a clog it's usually towards the end of the cigarette and not by the filter I find that the plate really messes things up for me.

Is there a way to get replacement parts for it? I lost a screw

@RayFixesAll

Жыл бұрын

Only on there website that I know of

It's weird your uncles favorite tool was a crescent wrench and NOT a vice grips. Vice grips are so much better lol

Спасибо за видео ОСБ Франция Мне не нравятся работа этого механизма В приоритете Powermatic Hawk matic

my main problem is it will not hold the cigarette tube I've tried the spring fix and it's not working for me

@RayFixesAll

9 ай бұрын

Wrap some electrical tape underneath the rubber and then Force the rubber down so the rubber is fatter

@dougstrickland5947

9 ай бұрын

@@RayFixesAll I squeezed it with some pliers and heated it with a cigarette lighter and it works now

Mine works very smooth but after I load it with tobacco it doesn't want to go. it's very hard like it's over packed, but it's under packed. have any idea what could be causing that. I've had an electric machine for the last three yrs but the motor gave out. I had bought the Top 2 a few months before I bought my electric machine. It really wasn't used that much. I know how to take care of them because I used to own the original topomatic and it lasted 5 yrs with my wife and I both using it. This newer top 2 has been problematic since I bought it. again, empty its smooth with no drag, but as soon as it's loaded, I get about half into the crank and it feels like its over loaded and becomes a real bitch to complete the crank. I hope you can offer me some advice. Peace..

@RayFixesAll

2 жыл бұрын

If it's the silver one I had problem with mine day one I through it out and got the one in video

@thebluesrockers

2 жыл бұрын

@@RayFixesAll they were selling the silver one's side by side with the one I got. it's never worked right. I just bit the bullet and broke down and bought another electric machine. it's running great too. I'm so happy to get my smokes rolled. I ended up buying a short red Marlboro pack today to hold me over. They cost me $8.00..Natural spirits were $9.19 It's just fucking nuts how much they're charging for smokes that aren't half as good as my homemade smokes. I'm sure you get that though. Thanks for the reply. Peace..

@skunkape2

2 жыл бұрын

Watch the over video titled Top o matic Fix. I had the exact same issue and his fix absolutely worked.

@dianebays5484

Жыл бұрын

@@skunkape2 I can relate. I watched that video and I learned about making the spring tighter or buying a new one. It was very helpful.

What's a good grease to use?

@RayFixesAll

2 жыл бұрын

I use any kind of automotive Grease basically anything you can get at Walmart for cheap cheaper the better I guess just don't use oil cuz it'll drip all over the place

@RayFixesAll

2 жыл бұрын

Keep in mind you have to do this roughly once a year to keep it running good

@joeleija6131

2 жыл бұрын

Wouldn't WD-40 work better and faster?

@RayFixesAll

2 жыл бұрын

@@joeleija6131 tried it WD-40 only last about 3 days

@dougstrickland5947

9 ай бұрын

dry WD 40 and yes you can get DRY WD40 in a can

Mine won’t turn on

No offense to people who use WD40 as a penetrating oil, but it is not. It's only temporary as it evaporates quickly. Bonafide penetrating oil like Liquid Wrench or PB Blaster work much better as they don't evaporate. Would you drink oil? Of course not, but you CAN drink WD40, and it won't hurt you. I haven't tried though. I use penetrating oil daily in my business. BTW, sweet PJs!

@michaelmclaren1333

2 ай бұрын

Everyone knows PB blaster is the best. Do the Styrofoam test if people wanna keep using wd40. Spray the same amount on 2 different pieces of foam. See the results the next day. PB will penetrate all the way through.

Hi Ray. Is there ANYWAY that the cutting blade can be sharpened on these darn rolling machines 🤔?? We roll butts for 2 of us everyday and these darn things keep wearing out in 6 to 8 Months only. Were spending almost $ 100 on these darn things! It's so frustrating! I don't feel we should have to keep buying a new one twice a year. Please help! 😀 thanks

@RayFixesAll

Жыл бұрын

Yes if you remove it and file the blade with a metal file make sure not to do to much and keep file on a 45 deg angle

@RayFixesAll

Жыл бұрын

This is a good set you can also sharpen the push blade a.co/d/cx3tWmP

@angelabarlow2012

Жыл бұрын

@@RayFixesAll thank u so so very much for the information and responding so quickly 😀

@RayFixesAll

Жыл бұрын

You're welcome

why not go ahead and get some Dawn dishwashing liquid and go ahead and wash it out with hot water in the sink while you have it disassembled just cleaning and reassembling fixed mine but I went ahead and greased it and it works better than you now

You get grease in your tobacco..

@RayFixesAll

6 ай бұрын

Only if you use a lot of grease and it's only like the first three ciggs

Jesus i fell asleep watching this