this guy should have his own tv show

@toypolloi

8 жыл бұрын

You know I think you are right!

@captianbadtouch5767

8 жыл бұрын

yas ^,..,^ you think youll ever to a restoration on old tin toys or old doctor who toys?

@gnarkillguch

4 жыл бұрын

4 year old comment, I know. But just stumbled across this channel and retroblasting recently, and I totally agree. I'd watch the hell out of a show of these guys doing vintage toy hunting and restorations etc. Something like American Pickers, but less boring.

Seeing the insides of the fighter really makes you appreciate the amount of engineering and planning that must go into each one of these old toys.

Just used this video to fix a wing ejection trigger for my original white TIE Fighter. It worked perfectly and saved me from laying out about $40 for a used but intact one, thanks.

@toypolloi

3 жыл бұрын

Glad it helped

I just was reunited with my complete working tie-Fighter from childhood......

Amazing repair job. The Force is definitely strong with you. Keep up the good work!

Dave. I also restored a TIE Interceptor as well. I turned it into 181st Elite Tie Interceptor. And I put a green light bulb. It took me three soldering attempts to put the new bulb. Finally it stayed on. It looks pretty good.

Wirelocking that wing hook gave me flashbacks. EVERY SINGLE BOLT AND NUT on a Sea Harrier is wire locked to prevent unwinding in flight! Awesome vid!

Very informative & straightforward. Effective video!

@toypolloi

2 ай бұрын

Thank you!

This a good fix, worked a treat on a reconstruction, as wing release clips are ridiculous prices as spares, and mostly only in the states, nice work toy polloi.

A very neat repair. I could never understand why you would want the wings to fire off. I'd be tempted to just glue them in place.

@TenkoVA

2 жыл бұрын

I think it's for the action of the ship "exploding", like it was destroyed in a space battle

@BronyNumber4096

2 жыл бұрын

@@TenkoVA Yeah. That's what it was for, all right.

@HeroQuestFans

2 жыл бұрын

@@TenkoVA yeah, toys that "blew up" at the touch of a button were popular. the speeder bike for example. great fun for kids playing with the action effect but also a great opportunity for parts to get lost or weak points to break.

Cmon uk Quest TV channel give this guy a slot!

@toypolloi

8 жыл бұрын

Yeah, Come on Quest TV :D I could be a big hit :D

I got an original princess Leia action figure from 1977. It was at a yard sale for a dollar. She's out of the box but in fair condition. A little wear, a bit of lost paint, but no missing pieces or serious damage

Your fix for the wing clips was great, another ship rescued from the salvage yard well done!

@toypolloi

8 жыл бұрын

Thanks. This was a tough job.

Really neat fix. Great imagination you've got. Your videos are so relaxing. Keep em coming!

@toypolloi

8 жыл бұрын

Thanks. Seems a lot of people find my voice relaxing. :D

@tyrranos9688

6 жыл бұрын

Your voice and the calm manner you approach each fix, confident the toy can be saved. If one method doesn’t work, simply try another. It’s a positive feeling.

I admire your ingenuity

This video helped me so much, currently restoring a white tie fighter. Starting with the wings, which both hooks were broken. The major pain will be fixing the button on the back that controls the light/sound, as it seems to be completely stuck. Great video!

Really loving your vids you have given me the need to restore a action man or mego figure

Great fix Dave. Particularly love the work on the hook. Rock solid!

I really thought it was going to be to hard to save this interceptor. I love the fixit videos and same as ever, I'm very pleased to say I was wrong. A great subject too as the Interceptor is easily the coolest tie out of all of them.

@toypolloi

8 жыл бұрын

It took a bit of thinking, but you can normally work out something.

This video was very informative .Thanks for posting !!

I love tie fighters so much. They can get gimicky with it and I'd probably like it. If that pod shape was attached to a stapler id love it

great fix it guide restoration video on tie interceptor brilliant.

@toypolloi

8 жыл бұрын

Thanks.

You're so good at this I'm betting you could build an entire ship from scratch with those Lego pieces. You're like MacGyver.

@toypolloi

8 жыл бұрын

+Shannon Helton 😂

I once turned a tie fighter into a bathescope for Darth Vader and played it in the bathtub. A real hack job!

Thanks Dave, it's taken me a couple of years to actually get around to doing this fix on my broken Tie Interceptor. Took a bit of adjustment on the "hook" but got there and works great. Thank you so much. I'd be very interested in replacement decals for the wings if this something you ever look to do.👍

@toypolloi

4 жыл бұрын

Check out Erik Stormrtoopers website. He has scans of them I think.

Amazing repair.

One of the few vehicles i didnt have Yet another cool vid

i know this video is old but i am surprised no one has made 3d printed replacements for those parts

I have used styrene to fix the clip on one of my vintage tie fighters. I cut part of the hook shape out of a styrene sheet and then superglued it on the broken one. It's not perfect as I have to hold down the button to latch on the wing, but it holds it in place.

Parabéns pela restauração.

great job as usual..

Great video keep it up.

If you have a part like that wing clip where you have one complete but the other broke, you can make a silicone mould of the complete one and cast replacements in resin with a pigment infill. If you're careful, you can even reinforce with wire inside the mould before pouring the resin, for extra strength. This would amount to a restoration indistinguishable from the original part, and you can re-use moulds if you come across the same issue later (or you can sell castings of replacements parts on ebay...!)

@toypolloi

6 жыл бұрын

That would be a good solution. I try to show fixes that anyone can do and that don't require special skills or equipment. Moulding and casting will be beyond most peoples abilities. So I hope this fix is something they can try. But for the more expert restorers, your way is certainly a good option. Thanks for the info.

@pomeroy600287

6 жыл бұрын

Wonder if it would it be worth doing a short video series (similar to the electroplating ones you did, which I found very informative) outlining the basics of the casting process?

The new TIE Bomber from Kenner's Star Wars: The Ultimate Force Collection. Imperial TIE Pilot action figure sold seperately. KID 1: Locked and loaded! Ready to go! With new light, sounds and bombing action, nothing will stand in the Empire's way! KID 1: Take that! Wings also pop-off for Battle Damage Action! KID 2: What goes around comes around! The new TIE Bomber from Kenner's Star Wars: The Ultimate Force collection! Action figures and A-Wing Fighter sold seperately.

Just bought this one :)

Splendid

I don't know what the Star Wars toys are made of, but if they are made of styrene (which they might very well be) a glue like WeldOn 4 or even just a polystyrene cement will adhere them together and also glue Lego to them. That sort of glue might be better for a piece which is under stress, such as the hook.

@toypolloi

4 жыл бұрын

Plastic weld does work quite well, you'll see me use it in over repair videos. I didn't know about it when I filmed this one. Cheers

would you be bale to do a video on how to repair a vintage star wars imperial troop transporter your other videos are great thanks

@toypolloi

8 жыл бұрын

If I find one I will give it a go. It's not a ship I have currently.

I've just bought a Darth Vader tie fighter and ive got the same problem with both wings ggrr!!!

another great video. The stress marks you mention at the end of the video im assuming you mean where the grey plastic has been bent a bit and it leaves a white mark? Do you have a method to get rid of the white marks or reduce them at all?

@toypolloi

8 жыл бұрын

They are. You can improve them in some plastics by waning them up in hot water. But the wing plastic is very brittle and makes little difference.

Wondering if you washed and oiled the wing launch springs. They were not looking good. Nice video too by the way. New subscriber here.

Build that notch up with epoxy putty, then sand away!

Good repair job but I would have used a pin vice and some .5mm wire and some fibreglass bridge compound to form and shape a new hook rather than butcher a Lego and rely on evo stick.

Never get tires of watching these Dave. Would plastic weld work for the wing release clip, or is it the wrong kind of plastic? Cheers

@toypolloi

2 жыл бұрын

It most likely would. I didn't know about it back then. Cheers

@JulesDesmond

2 жыл бұрын

@@toypolloi I've since repaired a Darth Vadar TIE Fighter (with the help of your videos) and annoyingly, managed to break one of the wing clip hinge/support pegs in the process. I can confirm that plastic weld does work really well on the wing clips. It's almost good as new again. Thanks for the inspiration Dave!

This must be your longest video yet!

@toypolloi

8 жыл бұрын

It was. But there was so much fix.

@ebkas

8 жыл бұрын

Yes.

What is the brand/model of your flush cutter Mr Polloi? it's pretty effective.

@toypolloi

7 жыл бұрын

No brand. You can get them on ebay or from model shops. Plastic Nippers are what they are called. See my recent Top Tip videos.

i wonder if you can make replacement holder clips using resin. obviously, a 3D printer could do it, too. or would those options be considered cheating?

@toypolloi

6 жыл бұрын

I'm sure you could. I try to show fixes anyone can do with limited tools. And casting or printing is ouch of a lot of people's skill sets.

Wouldn't it have been better to use only small spits of glue in case you ever need to take the piece of again?

I recently acquired one of these also with a broken wire near the light bulb. However, the light section is still in place and in good shape. Since it is glued in, how can I fix this with or without removing the bottom part with the bulb? Thanks in advance and love your videos.

@toypolloi

2 ай бұрын

You'll need to get to the LED to fix that which means taking the panel off. It's normally only got a couple of dots of glue holding it in place.

@alienbutcher66

2 ай бұрын

@@toypolloi how should I safely pry the panel off without breaking it? I'm sure you've covered this in some of your videos but I'm still nervous about making something worse. Thanks so much

a hair dryer is good for removing stress marks from plastic but I don't know how plastic so old would hold up to the heat

Do you have a listing of tools and supplies I should have to get started?

@toypolloi

3 жыл бұрын

Check out the tool shop on toypolloi.com those are the main ones I use.

Have you ever did upgrades to these? Like a new, brighter LED?

@toypolloi

8 жыл бұрын

+Shannon Helton Not yet. But it would be easy to do.

@tyrranos9688

6 жыл бұрын

Green LED would be fun since the movie ships fired green lasers.

Dave, what is your opinion on "modernizing" toys, like adding a real tiny sound board to this TIE Interceptor here, with the laser gun sound and the flight sound... maybe an explosion sound..? It would be cool to see you make something like that.

@tyrranos9688

6 жыл бұрын

Seems to me like that would be boring. Every TIE toy produced from now till the end of time will make the real movie sounds. The old Kenner ones have charm with that awful screech!

Hi Dave. Nice enjoying videos as always! Do you know lego piece reference code? Thanks!

@toypolloi

7 жыл бұрын

I'm not a Lego expert. I only know them as Lances. Check the bricklink website out. They have lots of details.

@hugogarciasanchez696

7 жыл бұрын

Hi! Checked for further needs. Item n.er 384926 and it is showed in 10223 KINGDOMS JOUST. Thanks again.

Another great way for removing adhesive residue is using lemon oil

Did you use fishing line to hang your Star Wars ships on the wall? Also did you attach it by the landing gear?

@toypolloi

3 жыл бұрын

A really old video, but I go over my display hanging here. kzread.info/dash/bejne/hqufpKaKZ6WphNo.html

@obirobkenobi3599

3 жыл бұрын

Fantastic , bless you. A great idea ! X

Wonder if TIE wings are interchangable? I have 4 TIE fighters but no interceptor?

@toypolloi

Жыл бұрын

They are. Same clips hold them all in place. They are just different colours.

@jtonythejett1

Жыл бұрын

@@toypolloi Thank you!!!

What year is listed on the battery cover? How were you able to discern which TIE Fighter this was since you only had the body in tact before you began replacing the parts?

@toypolloi

6 жыл бұрын

+Jarrod J. Perrott Based on the colour. It's a lighter grey than Darth Vader's tie fighter. And the normal ties are blue or white.

@JarrodJPerrott

6 жыл бұрын

Thanks for the response! Perhaps you can help me answer a question. I inherited a TIE Fighter body which works and is in great shape. The battery covers lists 1978 as the production year. So, I assumed it was a Darth Vader TIE Fighter. I started ordering the wings and wing connectors only to find they are much darker than the body of the TIE fighter in my possession. I was told this could be an Interceptor body, though the friend who gave this to me vehemently denies the wings this TIE Fighter once had were the Interceptor wings. Would I be able to possibly send you some photos to confirm so I can get a definitive answer on this? I would be so appreciative for any help you can provide.

@toypolloi

6 жыл бұрын

+Jarrod J. Perrott The bodies all have the same date on them as they are basically the same, just different colours. If it's a light grey, it is a tie interceptor. You can send me photos via my Facebook page, or other social media accounts. Links in my banner. Cheers

@JarrodJPerrott

6 жыл бұрын

Sending now. Thanks for your help!

Hi . As a child it bugged me the tie fighters only had one "laser light" you could modify it to have two, just a suggestion. Enjoying the videos a lot keep it up.

@toypolloi

7 жыл бұрын

It would be easy enough to do. And make them flash as well. There is quite a lot of space in the bottom of the ship for adding electrics. If I get another one in to repair I may do that. Thanks for the suggestion.

@tyrranos9688

6 жыл бұрын

Well that would be pretty cool to try.

Hi, I have an original Star Bird S-F-5052 Silver version which no longer works because we accidentally tried putting the battery on the wrong way. I'm trying to find someone to talk to about it and see If I can possibly get it fixed, it's the only black chip on the internal board which is damaged and is an MB signature chip so isn't easy at all to replace. Can someone help me? Joel

@toypolloi

8 жыл бұрын

Might be best to just by a spare parts one and swap out the electrics.

@therestorationofdrwho1865

8 жыл бұрын

Thank god i was thinking the same thing, would i be able to replace just the chip, because i would feel better having the original board in there, i guess it depends if its the same which I'm guessing it is, i haven't been able to find a spare parts version though, and i can only find the white version which i do know makes the same sounds and lights, though it doesn't have the same button on it which is what I'm also missing. thanks btw.

@toypolloi

8 жыл бұрын

I'm sure if you look over a few weeks one will turn up with all the bits you need.

@therestorationofdrwho1865

8 жыл бұрын

None of the star birds are the one i have.

@toypolloi

8 жыл бұрын

Give it time. One will turn up I am sure.

How did you know if it was a tie intercepter? Was it because of the battery bit on the back?

@toypolloi

7 жыл бұрын

The Tie Fighters are all different colours. This is the lighter grey body so an Interceptor. A DV tie is much darker grey.

@RHShockeymonkey

7 жыл бұрын

+Toy Polloi ohhhh! Ok thanks! :D

what type of gule is that??

@toypolloi

8 жыл бұрын

Evo stick serious glue.

my electronics work ok when testing them with a battery but the button won't make them work any ideas

@toypolloi

6 жыл бұрын

+Dale Rockwell Clean the contacts.

@jokerproduction5135

6 жыл бұрын

hey dave thank you they looked good but I cleaned them with sandpaper bought at the local dollar general and got them working i used a cheap multimeter on ohms to check conductivity I thought the contacts were clean by looking at them

2 questions. 1. I'm curious why you don't use model cement, does it harm the plastic in a way you don't like? 2. I notice you are very thurough at cleaning all the parts except the springs. I've even seen you remove rust from screws. But I've never seen you clean the rust from the springs. I'm curious as to why you skip cleaning the springs?

@toypolloi

7 жыл бұрын

I use what I have to hand. If the spring is inside, then I don't bother, especially when the video is already getting long.

you can actually buy lego hammers which have the angled edge instead of going to the trouble of scrapping a lance

@toypolloi

8 жыл бұрын

Thanks. I will look those up. I already had lances in my tool box as I use them for other repairs so didn't look for another part.

@ARob-bt4dr

8 жыл бұрын

ok

I wonder if it's possible to repaint an Imperial TIE Fighter into a First Order TIE Fighter?

@toypolloi

6 жыл бұрын

+TheTWRModeller I'm sure it is, but why would you ;)

@tyrranos9688

6 жыл бұрын

Funny, I was thinking of doing the reverse with a First Order TIE I bought cheaply.

hi

seriously serious glue lol only in England

Oof. It hurts me to see a Lego piece destroyed like that.

I love the restoration... except the part where you mutilated a perfectly good Lego piece. Q.Q

@toypolloi

8 жыл бұрын

It had to be done. I'm sure there are more Lego pieces that tie fighters!

@dasheight

8 жыл бұрын

+Toy Polloyi Have you come up with any other solutions for a broken clip? Being without Legos, the principle seems as if it would apply to a lot of other clip imposters, but wondering if you've found any in particular? Have a Vader tie in need of a new clip.

@toypolloi

8 жыл бұрын

+Adam Stevenson This is the best fix. And Lego is easy to get. Not sure what you are wanting?

@dasheight

8 жыл бұрын

Gotcha. Was just wondering if you had found any other pieces that could form the hook and was thinking of something beside that Lego piece. It's a brilliant fix, I'm just looking for an alternative, as I'm working on the restoration today. heh :-)

@toypolloi

8 жыл бұрын

+Adam Stevenson you might find something. But Lego is easy to work with and glues well. Might be worth waiting to get some.

Looks like it could have done with some Hydrogen Peroxide de-yellowing?

The new TIE Bomber from Kenner's Star Wars: The Ultimate Force Collection. Imperial TIE Pilot action figure sold seperately. KID 1: Locked and loaded! Ready to go! With new light, sounds and bombing action, nothing will stand in the Empire's way! KID 1: Take that! Wings also pop-off for Battle Damage Action! KID 2: What goes around comes around! The new TIE Bomber from Kenner's Star Wars: The Ultimate Force collection! Action figures and A-Wing Fighter sold seperately.