I refer to this guide every 1.5 yrs to fix my lawn mower probably saved me ~$250 so far.

My brother, I just bought a Craftsman m110 from marketplace and in the description were no issues with the motor, however, when I went to pick it up I found out that it has set for 2 years and it wouldn't crank up. So the husband told me instead of $100 give him $75 for the more in that I will have to get it serviced... Well I'm so proud to say that for the first time in my life I followed KZread and had taken the carburetor apart and got it started by the grace of God myself! 🤗 I thank you so much for your layman termed video and may God bless you further in your knowledge! 🤗

@jcx2bby

2 жыл бұрын

Thank you Donald, I truly appreciate you taking the time to comment. Congrats on the fix!

@MandrewWPolo19

3 ай бұрын

I’m in this boat

I bought this mower new last year and had the EXACT issues you described in this video. Thank you so much for the detailed instructions. Job only took about an hour and only cost me $7 for parts cleaner instead of $50 on a tune up

@jcx2bby

Ай бұрын

Nice work!

OMG ive been having the same issue with my mower, and your the only video that showed to disassemble the jet and clean the holes with a needle, would you believe i did that to my mower, and SON OF A ...... the thing started right up...made my day alot better

@jcx2bby

Ай бұрын

Nice! Congrats!

Big thank you from South Dakota! We bought this lawnmower last year and stored it over the winter never running it. I took it apart checked everything and it started! Thanks brother!

@jcx2bby

10 ай бұрын

Never been to SD...glad you got it going!

I’ve never taken anything apart in my life. Followed this video, and got my lawnmower running again. Great video bro. Much thanks.

@jcx2bby

3 жыл бұрын

Thank you kind viewer. Glad to have been able to help.

Thanks for the awesome video !! Was able to clean and flush out my Florida flood mower from hurricane Idalia and brake down and clean the carb. Works great now. I told my wife see, all these video's I watch on KZread university pay off. LOL. Signed, wish I was a small engine mechanic. LOL Thanks from Weeki wachee Fl.

@jcx2bby

9 ай бұрын

Great job Frank! Thanks for the feedback and congrats on the fix

You should really add the option to send you a super thanks, this video has been most helpful!

@jcx2bby

9 күн бұрын

Thank you

Thanks for taking the time to make this video. There aren't many people that would dedicate their time to going step-by-step and explaining theory of operation for some of the pieces. My mower cranked on first pull after following your walkthrough. Thanks again.

@jcx2bby

2 жыл бұрын

You're welcome Austin, and thanks for the feedback. I frequently get complaints from folks that I talk too much and take too long...from people who then go on to say they already know how to do whatever it is I'm showing. It's like "why are you watching then?". Haha. Thanks for taking the time to comment

Fiskars StaySharp Max Reel Mower kzread.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend This is what all push mowers should strive for. It was easy to push. It cut the lawn. The blades are sharp, very sharp. The one minus that everyone should be aware of is you need to be very careful taking the cutting unit out of the box. There’s a plastic guard so you don’t cut fingers as you take the main unit out of the box but it’s not taped down. As I took the unit out, I ended cutting a piece of my shirt. The plastic guard moved and my shirt touched one of the blades.

@jcx2bby

2 ай бұрын

Try tipping it forward on its nose for about 5 seconds and then putting it back down.

Just used your video and I fixed my mower! I am not handy, so thanks for making this easy for me

@jcx2bby

26 күн бұрын

Awesome sauce! Thanks for taking the time to come in

didn't work for me , but was very informative thanks

I truly appreciate your time to post this video. I watched it from start and finished. I worked on my Craftsman mower the way you showed us and it actually worked. God bless you!

@jcx2bby

Жыл бұрын

Thank you for taking the time to comment! Thank you for watching my video and congrats on your repair

Dude!! This was an amazing video. I’ve been having issues with my lawn mower not turning on for about 2 months. I watched the video like twice and decided to do it to try it out even though I was nervous of the tedious steps. My dad is disabled handyman so I wanted to find a way to fix it myself without having to pay hundreds of dollars to fix it. I followed each step then rewatched it backwards to put it together and IT TURNS ON NOW.! Thanks for sharing!

@jcx2bby

2 жыл бұрын

Haha, I live for comments like this! Congrats on getting it fixed and thanks for taking the time to let me know.

Thanks for showing me how to clean the m110 craftsman mower. The carburetor was very dirty. Your video was very helpful.

So i did this (+ part 2), cleaned the spark plug and air filter, and my mower started like a Honda. GREAT VIDEO!

@jcx2bby

Жыл бұрын

Nice! Congrats on the fix.

Went to mow my lawn today & mower would t start. Almost dropped it off at local shop to have them figure it out. Then I came across this video, followed it step by step & sure enough mower fired right up! Thank you sir!

@jcx2bby

2 жыл бұрын

That's awesome Rick. Glad you gave it a try and succeeded!

Thank you sir for posting this. It ended up being the same issue you had. This helped give me the confidence to complete the job and fixed my mower. Keep up the good work!

@jcx2bby

Жыл бұрын

Nice mike! Congrats on getting it going.

Awesome! I tried to follow a bunch of shortcut videos that didn’t work. Came back to your video and got it knocked out. It took about 4 pulls and it cranked up like a champ. Thank you!

@jcx2bby

2 жыл бұрын

Outstanding, glad you kept with it.

You sir are a gentleman and a scholar amongst men. I thank you and my lawn thanks you.

@jcx2bby

3 жыл бұрын

Haha, thank you Alex. Glad you got it working!

I just want to say thank you, because of your video I was able to get my brand new lawn mower working again

@jcx2bby

2 жыл бұрын

Nice! Congrats!

Amazing video! Thanks for the step by step process. Greatly detailed and an amazing walkthrough. Totally gave me the know how and I was able to fix the mower right away. Thankyou!!!!!

@jcx2bby

7 ай бұрын

Outstanding, glad to hear this!

Hey thanks man! You’re great at being descriptive and explaining what/why you are doing things. Time to go clean mine up and see if it works 🤞

@jcx2bby

3 жыл бұрын

Thank you Vincent, I truly appreciate that feedback. Good luck with your repairs.

Mine sat for 5 months, watched this vid and did everything you did and it worked! Thank you!

@jcx2bby

3 жыл бұрын

Awesome, glad to hear this!

Just a great video overall, super helpful. Followed your step-by-step instructions and my lawn mower cranked up on the first pull thanks again.

@jcx2bby

11 ай бұрын

Thank you!

Hope I’m not the only one that blew on it like he did. Got it running immediately after watching this! Bless you. Sucks this is happening to so many people.

@jcx2bby

3 жыл бұрын

Guarantee that many have checked their floats with a mouth compressor haha. Thanks for taking the time to comment

Worked like a champ. My mower was brand new and I cut the yard once. The next time it would start but die immediately. I knew it had to be the carburetor. The video helped figure out how to get it off. One thing to careful of: the sediment bowl o ring will swell when using Gumout. Take it off first. I was able to get it back in but I had to work at. I found the brass jet had tarnished sitting in the box from the factory. Great video.

@jcx2bby

3 жыл бұрын

Nice work Court! Thanks for the reply

Thanks, bought a similar lawnmower last year, used once and sat for months. Followed your steps and got it working

@jcx2bby

Жыл бұрын

Awesome!

Thank you for this video!!!! I watched the video twice then attempted to clean the carb myself (my friends know I have zero mechanic skills). The fist time I put it back together it didn't run, so tore it apart again and within 15 minutes she was running on the first pull! Appreciate you and the video.

@jcx2bby

2 жыл бұрын

Congrats Bobby! And thanks for commenting

So glad I found both of your videos! I often read the comments of most videos and was glad I purchased Mechanic In A Bottle along with the carburetor cleaner. I did almost all of your steps, except for the float needle disassembly. I put about 3 ounces of the Mechanic In A Bottle in the empty tank. My mower sputtered but didn't start. Pulled a few times nothing. Took the air filter back often and sprayed some carb cleaner and starter into the assembly. Again the mower started, but stalled. Used the carb cleaner again and the mower finally started! For the first ten seconds it didn't sound like it would it stay running. I tried a strap around the auto shutoff handle so that I could add some fuel before the Mechanic In A Bottle ran dry. I added less than half a tank and lower it idle and adjust itself for about three minutes, until it was no longer surging. Then I cut the grass until I ran out of gas. After adding more fuel the mower started right up. Thanks again everyone. I think this is my third season with this mower. I thought I ran out dry at the end of the season. I'll be adding with fuel stabilizer or the Mechanic In A Bottle at the end of the season to the fuel that used too run the tank dry. Also, you have a new subscriber.

@jcx2bby

2 жыл бұрын

Thank you Eric, I am humbled. I am grateful for subscribers like you that take the time to leave detailed comments like this...it makes the whole video and process better. Thank you!

@MacGyver1991

2 жыл бұрын

@@jcx2bby it's awesome that you take the time to reply to every comment. I wish I had that dedication. People like you that have the know how and willingness to share with others it's what KZread is all about! Again thank you for the high quality recordings and good luck to your family with Zumba and school. There's another KZreadr that I have to add to my DIY playlist. Need to replace the auxiliary battery in my hybrid and minor disassembly is required. Thankful for people that allow others to gain new skills while saving money. (Ford C-Max so that is not a vague posting.)

@jcx2bby

2 жыл бұрын

@@MacGyver1991 Well I try...as you see sometimes it takes me awhile to get back to the comments. And sometimes KZread doesn't notify me that a new comment has posted so I miss it completely. Thank you for the well wishes; I am truly glad that the virtual zumba classes are over because the super-loud latin music was about to drive me insane. Appreciate your comments, thanks again for watching and commenting!

You got my lawn mowed with this video. Thanks a ton. I guess letting this kind of mower sit will likely result in failure to start unless cleaned

@jcx2bby

3 жыл бұрын

Thanks for commenting James. Yes, it appears that even one winter of sitting plays havoc on these carburetors. It's sad.

This made my lawnmower start on the first pull! Thank you so much! I didn't see anything in there really, but I did all you said and VROOMM! Started right up! Subscribed, thanks again.

@jcx2bby

3 жыл бұрын

I am happy that it got you going John. Thanks for commenting. I needed a boost today.

@jhh243

3 жыл бұрын

@@jcx2bby I needed your hilarious commentary on the sheer randomness of briggs and stratton bolt sizes. I was sitting there getting peeved at it and watched your video and laughed HARD! That made my day.

Found your video and followed along. Thanks for the great tutorial. My mower is running nicely.

@jcx2bby

2 жыл бұрын

Nice! Congrats!

Thanks, man. I am a small engine noob. The details like socket size were amazing. I did everything like you showed and it wouldn't srart until the sixth pull. Exactly what you showed in the video. Thanks, again

@jcx2bby

Жыл бұрын

You are welcome Bart. Truly glad to help and thanks for the positive feedback.

Thanks so much, mine is fairly new but had the same problem. Followed your video and it worked the first time! I was so relieved, cheers!

@jcx2bby

3 жыл бұрын

Great to hear!

Thanks for the detailed video! Got my pos craftsmen back in the game!

@jcx2bby

Жыл бұрын

Yes!

This guy's video very thorough watched followed it and mine started right up after doing this.

@jcx2bby

3 жыл бұрын

Awesome Mike!

Great video, appreciate the high quality and step by step nature of it. Cheers, man.

@jcx2bby

Жыл бұрын

Thanks Garrett!

Awesome video! Great step by step advice and easy to follow. My lawn didn’t stand a chance. Thank you 🙏

@jcx2bby

2 жыл бұрын

Thank you! I appreciate the comment.

You sir had me rolling at the 7mm vs the 8mm bolts 🤣🤦‍♂️ Took the words right out of my mouth but you said it a lot nicer than I. We just got this used and here he told me just needs a new spark plug lol. I'm almost certain i'm going to be doing this to get her to work! The starting fluid deal, cant even find words for that diagnosis tool, but it's completely logical... 💯Thanks for this video.

@jcx2bby

2 жыл бұрын

I still can't figure the need for different sized.bolt heads when the fasteners are that small but what do I know. Good luck with your new mower, and thank you for watching and commenting on my video!

This worked like a charm. We bought the same mower on the 4th of July last year after finally giving up on our 25+ year old 1994 Craftsman mower, which I rebuilt the carburetor on and gave a complete tune up on to no avail. I used this new mower several times last year with new good gas, the mower wasn't left out or anything, but it wouldn't start this spring. So, I referred to this video and cleaned out the carburetor with carb cleaner, then rinsed it with water, dried it well, and also used some starter fluid as he suggested, and it fired right up on the first try.

@jcx2bby

3 жыл бұрын

Kevin, that is great news! Glad to have helped. These carbs are very sensitive to cleanliness, apparently

@kevinlehnhardt3503

3 жыл бұрын

@@jcx2bby - It's funny because it's not something I really ever had to do on the old mower until just very recently, but it finally quit on us. I may still take it apart again just to give it a chance since it is our old mower and is the same one we had from when I was a teenager. You can get parts for the old mower anymore, though.

Awesome video - this solved my issue. I bought this mower last season - literally used it twice would not start this season. I called Craftsman they told me I had to bring it to a tech - I paid $400.00 for this brand new last season - had a tech look at it - couldn't get it started. I'll never buy a Craftsman product again. Great video and thanks so much.

@jcx2bby

3 жыл бұрын

David, sadly your experience is like so many others. I know that the main problem with these carbs gumming up is the ethanol fuel we use BUT. The manufacturers should be held accountable to find a carb that isn't succecptible after just one season.

Thank you for your videos. Followed your tips from start to finish, after 5 pulls and new gas and fired up and I mowed today, first time in February

@jcx2bby

Жыл бұрын

Outstanding jack! Glad to hear it!

Thank you so much sir I was afraid to take apart my new mower but you gave me the confidence to do it.

@jcx2bby

9 ай бұрын

You are very welcome, thanks for commenting and good luck on your repair!

Thank you for the video. Ive had the same problem with two new mowers. Following your video I was able to fix them both.

@jcx2bby

2 жыл бұрын

Nice! It's that ethanol that really messes up these carbs.

This is the second year in a row I had to watch a video and bro actually you do an Awesome job! Thank you!

@jcx2bby

3 жыл бұрын

Thank you Dennis, truly humbled by that. Thanks for taking the time to comment

Thank you. This helped me fix my POS mower

@jcx2bby

9 ай бұрын

You are welcome and congrats

Just wanted to thank you for the video. Well done and I fixed mine with its help!

@jcx2bby

10 ай бұрын

Awesome! Thanks for commenting

I did this today, new mower (from last year, I borrowed my friend's mower the rest of the summer) only ran 4 times and then wouldn't start. I had that white crusty stuff at the smaller hole, cleaned all places with a needle and blew thru it. I didn't remove the float but I did a visual check to make sure no gas was inside the floats. Mower started right up! I let it idle a bit and turned it off. It only took about an hour to do but I didn't rush. Thanks sooo much for this. I also have another "new" mower that only started 3-4 times, that one is self-propelled. I didn't feel like messing with it back when it stopped starting so I bought a cheap mower which is the one I just fixed. I will definitely fix the self-propelled and use that one. Crazy how they both did the same thing.

@jcx2bby

2 жыл бұрын

Awesome, glad this helped out. Thanks for commenting

Great video! Thanks for making it. I had an opportunity to buy this mower (used only 4 times) for $30. After watching I realized its a piece of junk. Even if I fixed it by watching your video, chances are it would just break again in 2-3 months. :-)

@jcx2bby

11 ай бұрын

They're not well made.

It worked like a charm. Exact same problem. Exact same solution. Thank you!

@jcx2bby

3 жыл бұрын

Thank you for commenting Chris. I'm really happy it worked for you

Great video, just helped me get my mower up and running! 👍

@jcx2bby

3 жыл бұрын

Awesome! Congrats!

Thanks. Very well made & narrated & very helpful

@jcx2bby

2 жыл бұрын

I appreciate your feedback

Great video big guy! I wanted to try one last ditch effort before I started breaking everything down and cleaning it. I bought a $6 bottle of mechanic in a bottle. Emptied the old fuel and mixed with some fresh fuel. Sprayed with staring fluid like you recommended and it has been running ever since. Thanks!

@jcx2bby

3 жыл бұрын

Suhweet! I've never heard of such an elixir. I will keep my eyes peeled for something like that. Where did you get it?

@MsHasturhasturhastur

3 жыл бұрын

I tried the same thing, picked it up at lowes, but it wasn't enough to get me running

@jcx2bby

3 жыл бұрын

@@MsHasturhasturhastur bummer

Thanks! Trying this out today, so wish me luck!

After I cleaned mine out and tried to start it... it wouldn't start either... so I just primed it with starting fluid and it hit once, sputtered , then fired right up... think it just needed priming!! Thank you so much... I've never torn into a carb., so i was hesitant... but you made it easy dude!! thanks!!

@jcx2bby

Жыл бұрын

Awesome! Thank you for commenting and congratulations

I have a M320 but the carburetor is the same and after watching this and another video to clean out my gas tank I got it going on the first pull! Thanks.

@jcx2bby

3 жыл бұрын

Awesome! Thanks for taking the time to comment

I forgot to run the gas out or drain it. That’s that’s why I’m here. Thank you for the video my man!

@jcx2bby

3 жыл бұрын

No prob, I know how that goes

Thanks for this vid - very good. They made a toy lawnmower now one winter season later I have to learn the ins and outs of lawn mowers to cut my grass again.

@jcx2bby

2 жыл бұрын

Lol, well put!

This video was so needed. Thank you 🙏🏾 thank you 🙏🏾 thank you 🙏🏾

@jcx2bby

Жыл бұрын

Glad you found it useful and thank you for commenting!

DUDE!!!! Thanks so much!!! This worked for me. I have the same exact model. It didn’t run the first few pulls because it had to get the fuel back in the system, I guess but it started right up after a few tries. I didn’t clean it with any sprays but just wiped it down. So Big Thanks.

@jcx2bby

2 жыл бұрын

That's awesome man , congrats on the fix!

Fan-effin-TASTIC. Followed step by step til' I got to the carb(since you said the bowl it sat in seemed to be the problem). Then reassembled it! Boom, works!! A neighbor was going to throw this away, I asked if I can have it. I feel bad that it was this easy to fix but they already had a new one so 🤷🏾

@jcx2bby

2 жыл бұрын

Awesome! Congrats on keeping this one out of the landfill. Thanks for taking the time to comment.

Worked like a charm thanks for the information!

@jcx2bby

2 ай бұрын

Great!

Thanks bro. This did it for me. I had that calcium build up in the guts of my carburetor. Cleaned it out and works like a charm. Thanks dude

@jcx2bby

Жыл бұрын

Freaking sweet! Congrats!

Thanks My M220 and my old 725 are up and running with single pull. Key was at 17:09 and cleaning that middle tube.

@jcx2bby

9 ай бұрын

Nice! Congrats!

Absolutely great video, very helpful. Thank you sir 👍🏻

@jcx2bby

Жыл бұрын

Thank you!

Thank you so much for your video. I was almost to the point of burning this mower lol. Thankfully I saw your video and took everything apart and cleaned it and it's working like new.

@drumhailer547

Жыл бұрын

Worked like new ? Mines ran 3 times 🤦

@stevetruelove6062

Жыл бұрын

@@drumhailer547 yeah mine worked great until the next time I used it. I got rid of the peace of junk.

Damm bro after your video l got my lawn mower going again thank you great 👍 job .

@jcx2bby

2 жыл бұрын

Thank you and congrats on the fix

Wow somehow this helped my lawn mower lol did what he did and at the first pull it started. Man thank you again for making this video 👍👍👍👍👍👍👍😭

@jcx2bby

Жыл бұрын

You're welcome, congrats on getting it going again.

Thank you so much. Just fixed a no start issue on the same mower. The gas that was left inside was a yellowish color.

@jcx2bby

3 жыл бұрын

Nice, congrats! Thanks for taking the time to comment

great video, thanks for sharing it with everyone!

@jcx2bby

Жыл бұрын

Thank you

Nice job, and you're right about not bending those metal rods. They are super important to how well it runs and starts. But you got them backwards in the description. The first one you grabbed, that goes to the front of the carb is the automatic choke. It holds the choke closed and as soon as the mower starts the air coming off the fly wheel pushes it away and opens the choke. The other rod is the governor and controls engine speed.

@jcx2bby

Жыл бұрын

Thank you Kevin

Reminds me of my first marriage. Everything was going so well until the abrupt unexplained ending.

this thing has been giving me a headache for a week or so I took everything apart cleaned the carb multiple times and nothing. I lifted the back of it and manually turned the blades with my hands a few times and BOOM starts right up. Hope this helps!

Hey man thanks for the video. Bought one off OfferUp and they guy said it was only used one last year. Got home and it didn't crank so I thought I was had! However followed these instructions and it worked!

@jcx2bby

Жыл бұрын

Freaking sweet! Congrats on the score man.

Excellent it work just like you said did exactly how you said and when I pried the lil middle piece loose them 3 lil holes 2 of them was stopped up. I believe from the manufacture cause its brand new and like the holes was not all the way open on 2 of them stuck the needle on both sides I was able to blow threw felt all 3 holes air came threw put everthing back together and walla pulled a few times it caught and been mowing my half of acre lol thanks

@jcx2bby

3 жыл бұрын

Good job Chris! A little knowledge and work goes a long way. Thanks for taking the time to comment

Thank you, it just worked for me.. big appreciation..

@jcx2bby

2 жыл бұрын

Thanks Dom! Happy to hear it!

Great video! Best advice was at the end... “if it doesn’t work, do it again”. Unfortunately, I had to do it twice and the only thing I changed was the second time I waited to put my tools away until it started. It did. You the man! Thanks.

@jcx2bby

4 жыл бұрын

Ha, that's just the way it is sometimes isn't it. Glad you got it running 👍

Awesome video thank you this helped allot

@jcx2bby

2 жыл бұрын

Thanks for commenting!

I should have bought the mower I had to prime. This is BS! This video I will save for my son to fix. Thinking your getting the most for your money. Read the fine print. I'm so done. Two hours later: I got it started without the breakdown. I cleaned the filter vacuumed the filter area, drained the gas out and kicked and shooked it. Came back two hours later and it started. Hallelujah!

@jcx2bby

Жыл бұрын

Understood

You just saved me like 30 bucks 🙏🙏🙏 bless you

@jcx2bby

2 жыл бұрын

You're welcome my friend.

Thank you for this!! I got a new mower late February and I've yet to get to to start or even make a sound(city girl, first lawn). I'm going to try that spray and see how it goes.

@jcx2bby

4 жыл бұрын

Awesome, congrats on the 1st yard and I hope this video helps you out if you need it.

@Sisa_Limpson

4 жыл бұрын

@@jcx2bby I just got back in. Went to get the starter and sprayed it where you showed. It's making a rubbing sound now, almost like a low honk but it still won't start and it's literally new out the box. Do you have any idea what it could be? Thanks for your reply 💟

@davidwells6556

3 жыл бұрын

@@Sisa_Limpson there should be a warranty, go trade it in. make sure you use new gas can and fresh gas if you get new mower. As for rubbing sound make sure there is no blade obstruction.

@chettrole7882

3 жыл бұрын

@@Sisa_Limpson adjust your handle. It may be blocking the blade. If you turn the mower over and see that the handle is too far down and blocking the blade just unscrew the handle and bring it up to the next notch

"doesn't work" felt so validating

@jcx2bby

2 ай бұрын

Lol. It be like that sometimes

Worked like a charm Thank you

@jcx2bby

2 жыл бұрын

Sweet. Thanks for commenting

Just used this to get my pos M110 running. I guess I'll be looking it up next year too. I should see if I can find one of these on marketplace. It would be a nice flip. I took it slow and easy so it wasn't what I'd call fast but it wasn't brain surgery either.

@jcx2bby

3 жыл бұрын

Hi Jodi, yes, definitely not brain surgery or I couldn't do it lols. Glad you got yours running and thanks for commenting.

Nice. great info, clear guide of what is up. But please... horizonal landscape mode please.. .... please.

@jcx2bby

3 жыл бұрын

I'm torn on landscape vs portrait mode when I make these vids now. When I look at the metrics for my viewership, so many views come from mobile phones, that I've begun to film more and more in portrait because people are using their phones to watch when they are working on their mowers. Landscape shows more detail, but since youtube supports the larger portrait mode now , I've begun to abandon landscape. Sorry 😐

Magneto clearance! Got one for free. Seemed pull start was normal. Fresh fuel. Would gradually start with multiple pulls but even then it would stumble on very low rpm for several seconds then get going. Once it started, it ran good. Spark was good. Compression good. Very dirty filter. Carb had been molested so I bought a replacement. Same prob. Checked valve lash and adjusted. Same prob. Decided to take engine cover off to see if there was a problem in there. Noticed the magneto looked too close to the flywheel. Used the business card trick to adjust. Fired right up. I guess the incorrect magneto clearance was from the factory.

@jcx2bby

Жыл бұрын

Yes it does happen sometimes. kzread.info/dash/bejne/nq53ycWCYLyqido.html

Super helpful thank you so much!!!

@jcx2bby

2 жыл бұрын

You're welcome and thanks for commenting

Same motor. Good spark. Sprayed started fluid in carb and still not trying to start. Safety handle pulled and working correctly. What's next to try?

You are the best thank you!

@jcx2bby

7 ай бұрын

😊

That second linkage is for the automatic choke. The Other end runs to the muffler. As the muffler heats up the bimetallic element pushes the linkage and opens the choke.

excellent video ty so much.

@jcx2bby

Жыл бұрын

Thank you.

Bro, this and the part 2 video saved my ass and my parents possibly some money and definitely some time today. They wanted to take it to Lowe's to have it looked at, I think k its still under warranty.

@jcx2bby

3 жыл бұрын

Nice! Glad you found the video useful! It would most likely have been a waste of time to take it back, Lowes after sales service is pretty dismal. Good job!

@oMercky

3 жыл бұрын

@@jcx2bby your in depth/detailed descriptions along with the proper camera angles qere definitely a key factor.

This is a great video, and is very informative. However, the first thing I would recommend to start with is just spraying a little more starting fluid in upon initial check. My buddies wouldn’t start and had only been used one Indiana summer. I was totally prepared to take this apart and clean all the ports etc, but before I did I tried having the wife pull it while I sprayed the starting fluid. Once I got it started and it ran off the spray for 2 seconds, it was fine. Again, the video is great, but potentially save yourself some work and try this first.

@jcx2bby

Жыл бұрын

Absolutely, great tip!

Great video! Got the same mower. Last of last year's mowing season, it would start first pull every time. Sat in the garage over winter, first time trying to start today, and it wouldn't. Spraying starter gets it to turn over but it won't keep running. So, something in the carb, likely. So, what it the PREVENTATIVE takeover that might avoid this - is it draining the gas before storage? Using only non-ethanol gas? What? Thanks!

@jcx2bby

2 ай бұрын

I think the best prevention you can do is to store it inside somewhere if you can, and drain all the gas out. If you can't drain the gas or don't want to, run ethanol free gas in these things. It's the ethanol especially when mixed with just a little bit of moisture, that causes all the stuff to build up in these carbs

@philipatoz

2 ай бұрын

Thanks much for your response. Did the cleanout procedure in the video. Mower is like new. Would not start afterward. BEFORE the cleanout, using starter fluid got it to turn over but it quickly shut off. Did the cleanout (no obvious dirt or sediment in carb), but no start afterward, tried starter again, and this time nothing at all. Last of last season, it worked PERFECT, started within 1-2 pulls. Also, drained all the fuel out, filled back with ethanol-free, and installed a new sparkplug. Nothing. Weird. Very frustrating. BTW, this model has no primer button. I even tried the trick of tilting the mower on left to help gas flow into the carb - no luck. Any thoughts? Thanks!

Thank you! For some reason I to do it twice too. But it worked!

@jcx2bby

3 жыл бұрын

Nice job Brian! You gotta stick with it a second time sometimes

I have the same model and it's been barely 2 months but won't start. Even though I have the tools and the expertise to fix it(thanks to your video), I will return the lawnmower. Would rather spend a few more $$$ and get something more reliable that will at least last a whole season.

@jcx2bby

3 жыл бұрын

I don't blame you one bit!

After watching this, I bought the version with the Honda engine, $100 more but so worth it

@jcx2bby

3 жыл бұрын

Better engines for sure, but just as susceptible to gummed up carbs if not taken care of

My mower went from being completely dead to cranking on the first pull. Thank you for the video! My advice to all who have used this technique and don't want to have to repeat: If your mower will lay idle for months, let it run until you burn every drop of gas. That's the root of the problem.

@jcx2bby

2 жыл бұрын

You are most welcome Jeremy. Thanks for commenting

Quality video and instructions. Is there a follow up video showing it put back together?

@jcx2bby

3 жыл бұрын

kzread.info/dash/bejne/e4J1q66wmLLOibg.html