Nice troubleshooting and repair. Usually it turns out to be something simple. But some times finding it is the real problem. I have an older version of Weller WS-51 soldering station. It stopped heating up after a few decades. And since it isn't in production anymore, I had to buy a new heating element from a newer versions and adapt it to the old hand unit. It was a little tricky, but it now works like new again. Thumbs Up!

@zana3587

4 жыл бұрын

thank you sir

Life saving man. I managed to repair mine like this. Thanks a lot. 🙂👌

@eyefishinggunkchannel1011

Жыл бұрын

My end i scrubbed off with the sand pqper the little wire was exposed heqted up red hot can i fix it i have diff heads but theee solid from a another iron..do i need 2 make the wire curl round so obv its runnkng posititive then it runs bk into its self nmfor negative kkndov...am in lidl now they have non i dont have online banking ime bloody gutted i went through 5 of the parkside plug in ones they kept shorting out for no reason they kept tqking thrm bk as it wqs jot me..but ye sand paper been ruff and thr copper joint duz not go well..i would be over rhe moon if it can be fixed

Great video, except for one thing, NEVER sand a soldering tip, they are coated , as soon as you sand the crome protective coating, and the coper is exposed, they will be eaten up in just a few solder joints.

@zana3587

3 жыл бұрын

thank you sir you are right but there is no way to take off

@MarcoJetti

Ай бұрын

@AltairAlphones Coated by what? Can you explain what to do then?

Very nice job and I am so glad when I watch someone he knows what he want and what he have to do.

@zana3587

4 жыл бұрын

Thank you sir

@user-jr8gp2en9b

4 жыл бұрын

@@zana3587 Sir I saw in some of your replies written in Arabic so would I ask from where you know arabic if you don't mind.

Толково!!! КАк всегда-отличная работа!!!

@zana3587

4 жыл бұрын

Спасибо, сэр

Insane tutorial 😂😂, nice work

Very good ,I don't know what i have to say only when i watch you fix things i feel i am in paradise ,because i am fall in love with repairing things.

@zana3587

4 жыл бұрын

Thank you, sir, I hope it will be useful to you

@user-jr8gp2en9b

4 жыл бұрын

@@zana3587 In my country they says cemetery don't refuse any dead man and i am like cemetary with learning things even if I know this information.

Youre the GOAT

Never sand down the iron tip, it removes the protective coating, and solder will not stick to it and the tip will be eaten away during soldering.

@zana3587

3 жыл бұрын

thank you sir

@nelchan2421

Жыл бұрын

true based on my experience 100%

Genius! Thank you

@zana3587

Ай бұрын

thank you sir

انت مبدع استمر اخي الكريم

@abbasastranger7166

4 жыл бұрын

اني من متابعيك دائما وبااستمرار اخوك من العراق

@zana3587

4 жыл бұрын

اشكرك اخى العزيز

Nice job 👌🏻

@zana3587

4 жыл бұрын

Thank you sir

Very nice work.

@zana3587

2 жыл бұрын

thank you sir

How to repair a soldering iron using a soldering iron😂😂 Great work, anyway!!!!

@zana3587

Жыл бұрын

thank you sir

Nice work bro

@zana3587

4 жыл бұрын

thank you bro

Is the heating point a PTV? I am looking for a way to use it for a much lower temperature, around 100d C, to melt wax. Any tips or ideas?

Is there anything this guy can't fix? Great job.

@zana3587

4 жыл бұрын

thank you sir

Thank you for help. My stop work before months. I try these fix.. now is work..May be these model have low quality tips. After this fix its hot very fast now, than before.

@zana3587

4 жыл бұрын

good work sir

@nikstoun

4 жыл бұрын

@@zana3587 Thank you for your idea :)

أحسنت أستاذ👍👍

@zana3587

4 жыл бұрын

اشكرك استاذ

You won again !

@zana3587

4 жыл бұрын

Thank you good man . How are you ?

@jusb1066

4 жыл бұрын

@@zana3587 thank you I'm well and hiding like everyone 😄

Hi, can you make a video where you make replacement soldering tips, they wear off quite quickly and are pretty hard to find. Thanks!

@zana3587

3 жыл бұрын

sorry sir

@roland3462

3 жыл бұрын

@@zana3587 I took apart an old one but I didn't find a way to refurbish them, are you still using yours?

Hello nice video I had the same problem but I fixed it and it still never worked so I bought a new tip and still doesn't work I don't if its the brass plug it screws into ha e you any recommendations on how to fix this please

@zana3587

4 жыл бұрын

no idea sorry sir

In this way you shorten the resistance wire. Temperature will be higher after repair.

تصليح ممتاز لسه هذا الكاوي لم يصل عندنا

@zana3587

4 жыл бұрын

اشكرك اخى بس عندكم اشياء افضل من الكاوية

@kahlid-ataya

4 жыл бұрын

@@zana3587 عندنا glue gun يعمل ببطارية ليثيوم

@zana3587

4 жыл бұрын

نعم لقد رايت هذه فى السوق انه جيد

4:15 this looks like cold solder joint

Well done, i have the same product and it doesn't work,i hope watching ur video to solve my problem.Thx

@zana3587

4 жыл бұрын

thank you sir i hope it's helpful for you

👍👍👍👍👍

@zana3587

3 жыл бұрын

thank you sir

Can i use 2.5ohm 2w resistor instead of this heating wire?

@zana3587

3 жыл бұрын

sorry sir no idea

أخي الكريم عندي نفس هاي الكاويه بس مسمار الأمامي نفقد كيف ارهم مسمار غيره ياريت تنوهني

@zana3587

3 жыл бұрын

ربما يمكن ايجاده فى اى بى

If my tip will fail, I will replace it with a JBC tip that I have which is also very small and 100 times more quality haha.

Where can I buy replacement tips for this soldering iron?

@zana3587

Жыл бұрын

no idea sir

@raccoon6072

11 ай бұрын

Aliexpress

If you open something for the first time, how do you always know what is wrong with the machine ?

@zana3587

4 жыл бұрын

Step by step until I get to the problem

@i1bike

4 жыл бұрын

@@zana3587 it would be awesome if you would let people to buy those tools from you. You could sell all the used tools that you fixed and repaired. I think many of us would buy it. It is not that we want cheap tools, it is because here in europe even if you have a blue bosch tool, noone wants to fix it. For example, new 18v cordless makita is 65 euros, so noone wants to fix my old makita or bosch. I am forced to hrow it to trash and buy new. People became lazy, they want fast money. Therefore, i would be very happy to order many tools from you. If you are interested, please contact me, here is my mail: irinejovlen@mail.com

Are you an engineer or self-taught?

@zana3587

4 жыл бұрын

not engineer

نفسى فى منتجات الشركه دى

@zana3587

3 жыл бұрын

هواية جيدة

Where can I get the tip for it?

@zana3587

3 жыл бұрын

maybe in ebay

@kacperszawarejko7103

3 жыл бұрын

@@zana3587 No they don't have any

@zana3587

3 жыл бұрын

Sorry sir

Wouldnt a proper fix be temperature control so the iron doesnt overheat everything it touches

@zana3587

2 жыл бұрын

it doesn't overheat

Garbage. I bought it in lidl for 10.99 euros, it lasts literally one and a half days. Don't buy.

Hi Dahen big thanks! Do not do much electrical work and bought this on impulse. Never had much joy with it. Just never warmed up enough and thought it was a gimmick. Was looking for a strip down post to see if I could use parts for another project. So glad I found your channel!! It was a lovely sound when I got my continuity bleep!!! It is now working as it should. Got a blister to prove it!! Doing my research I found a great site for all things Parkside ( tips included) at lionshome.co.uk. Many thanks bud.