don't get pressured into buying the shiniest new toy. I'm an electrician and yes all my tools are Milwaukee but the basic brushless impact with a 2.0 battery is more than enough to drive little screws all day. I work circles around the guys that brag about their newest fuel with a 5.0 battery.
@unclefester4626
Жыл бұрын
You might consider the compact 3.0 high output batteries. They're small, light, and alot of ZING to them. That high output architecture is real. I have an m12 5.0 high output and i tried it in my m12 compact driver drill.....WOW what a difference. I was laughing hysterically afterwards. Like an angry chihuahua that's brave enough to pizz on a big dogs leg.😁
@atomsk1646
Жыл бұрын
I work as an hvac installer and use a m18 with 3.0 that runs all day. Really depends on what you do and from what i see electricians work really only calls for a smaller impact
@alexanderlangdon92
Жыл бұрын
Why drag around something heavy all day if a lighter tool does the job fine
@TheDarkestDestroyer
10 ай бұрын
I use an 8 cuz I'm not an electrician and a 2 will die in 30 seconds doing my job
@curtisyue182
8 ай бұрын
As someone who uses the rotary hammers on concrete on the regular, I highly recommend any M18 battery that says "High Output" on them. They enable your tool to work at full potential, its no lie. I use non-HO batteries trying to punch through the wall, and the tool falters and stops 10 seconds in. When I slap even the smaller high output battery on (3.0AH), it powers through like a champ.
@mannyfresh8504 Жыл бұрын
My gen 3 impact gets lonely so I find myself Grabbing that on the field from time to time over the 4.
@PrisonMike-_-
Жыл бұрын
Same here hahaha
@548raptor8 ай бұрын
M18 Tire 🛞 Inflator as well..
@jessec.6101
6 ай бұрын
As a truck driver, it can easily handle truck tires. An absolute monster the M18 is.
@theshore2667
2 ай бұрын
Question, why pay to get a Milwaukee inflator when you can go into any oil change shop and get your tire inflated for free
@karstenalbers2255
2 ай бұрын
@@theshore2667 I can see a use case where you're in the middle of nowhere with a smaller leak and you need to top off the air until you reach a service point
@theshore2667
Ай бұрын
@@karstenalbers2255 I see that, in that case. It’s extremely useful!!
@JoeBot2111 ай бұрын
Absolutely agree on the rear handle circular saw. That layout where you can see the blade is so much better than the traditional design.
@ToolswithSoAlz
11 ай бұрын
Yes sir
@WiscoHandyman Жыл бұрын
Agree with this. When I first started my maintenance technician job these were the first 5 power tools I had and I was able to complete so many tasks.
@ToolswithSoAlz
Жыл бұрын
Thank you
@greezy937 Жыл бұрын
M12 has plenty of balls for what I need
@SGTSpliffer
Жыл бұрын
That's my go to impact....m12
@danielshcherbakov3728
9 ай бұрын
Same! They deliver an amazing amount of power. I have an older impact m12 and hell, it’ll drive lags all day if you need it to. And the circular saw, I expected a lot less from it and oh boy, does it chew through 2x4’s like a beaver lol.
@eugenefromguam Жыл бұрын
recently picked up the m12 fuel rotary hammer 5/8 love it so far
@ToolswithSoAlz
Жыл бұрын
Nice
@rickybyrd6606 ай бұрын
I think it all depends on your application. I'm in the automotive field and use the m18 brushless and my dad uses the m12. I don't like changing the battery all the time and that's why I use the 18. My dad likes how light the 12 is with the 2.0s, as far as power they feel about the same to me.
@wynstondannerman6058 ай бұрын
I’ve had a lot of issues with that super sawzall’s oscillating/reciprocating movement. I mostly use it to cut cast iron and other hard metals and the chuck gets obliterated. Every time I switch blades it’s a struggle. The Vick release system on the standard sawzall is way better.
@icarustothestars
14 күн бұрын
Agreed. My co-worker as the super sawzall and I hate the blade locking system on it. It gets crazy hot if you need to change blades.
@sgt.miningdrill26807 ай бұрын
I started buying milwaukee tools after i found their big impact wrench on the road So far the best tool for me is their m12 drill with sleek 2A battery It fits nicely into tool bag pouch
@ToolswithSoAlz
7 ай бұрын
Awesome
@ballhead329410 ай бұрын
I have all and absolutely agree with must have
@davidperry4013 Жыл бұрын
My M12 fuel gen 3 drill and impact driver may need its M18 companion. I’ll get the Gen 4 M18 fuel combo kit whenever they have a good loss leader for one at HD.
@ToolswithSoAlz
Жыл бұрын
Well, stay tuned because I am constantly letting folks know about deals
@LUCASPELUCAS777
5 ай бұрын
I recommend getting the Regular Brushless M18, I just picked up the 2 pack drill and impact driver today for 189$ at HD, yeah it’s not a fuel but the price difference is huge and well worth it in my opinion. You can always upgrade later
@jeffwolf80188 ай бұрын
I have a Milwaukee super sawzall from the mid-90s that is an absolute beast I don't believe they've made anything bigger or powerful than this one yet. It has 3,200 strokes per minute and 1 1/4 inch stroke. With adjustable orbital action. Comes with those plug-in chords unfortunately I have an older one that has a three chord 50 ft long cord which is incredible to have but the new ones don't come with a grounding peg so they can't use that on this particular saw because it only has 2 prongs. One of these days I'll probably pick up a 50 ft 2 prong cord but they're not exactly cheap.
@georged1085
7 ай бұрын
I may be interpreting this wrong but if you need a cord with 2 prongs you can just break the third one off
@jeffwolf8018
7 ай бұрын
@@georged1085 the 2 and 3 prong cords are not compatible with each other. You can only use 2 prong cord in a grounded sawzall and the three prong cord has a ground in it. Physically impossible to cut the third prong off and stick it in a Two prong cord if I'm understanding you right..
@David-yx7nk Жыл бұрын
Love my fuel impact driver
@LegitGamer0077 ай бұрын
I’m a Milwaukee guy and I have a dewalt impact wrench and it’s way better than Milwaukee equivalent. Milwaukee is definitely better tools for most part but having everything Milwaukee I don’t see beneficial give yourself options.
@karstenalbers2255
2 ай бұрын
It's too expensive to have 2 full battery brands, just buy into the one with more of the best tools you need and deal with the others. The power difference is usually pretty minor
@sammccollum298510 ай бұрын
can confirm the 2904 is a beast, but honestly their basic brushed 6-1/2in circular saw is just fine for me. I use the 6370 8in metal saw a lot more.
@dannydethanos69943 ай бұрын
I like the surge it’s so smooth with its power delivery
@kaipo84899 ай бұрын
Impact driver, 6.5 circ saw, multi tool hackzawl, hammer drill jigsaw can get you through most jobs
@dawsonberg64 ай бұрын
My gen 3 stuff still kicks just fine I'll upgrade when I eventually burn em up
@nitenite71429 ай бұрын
Don’t ever trust a man talking about tools that has soft hands 😂
@ToolswithSoAlz
9 ай бұрын
Don't ever trust a moron leaving comments on videos they don't have the brains to understand
@Dpfdoctor
6 ай бұрын
@@ToolswithSoAlz Its nice to see you clap back at these idiots making comments from behind their screens, I would do the same
@ToolswithSoAlz
6 ай бұрын
@andymason2068 OH I see, a pickle puffing, pillow biter like you needs a resume because the only part of you that's ever been a man is the part another man put in you. Well, Honey, I used to build megawatt projects for the US military. So, not only do I know more than you, have done more than you, own way more than you, I am also better than you.
@ToolswithSoAlz
6 ай бұрын
@DanielMThomas I don't let these guys get away with things because it's pretty clearly the only job they are familiar with is the kind where they relax their throat and make eye contact. Lol
@lukea45046 ай бұрын
i’m a small engine mechanic i run m18 with the new impact with the high output 3.0xcp and it does me just fine allllll day
@ajfromcjbasements65748 ай бұрын
Have them all
@ToolswithSoAlz
8 ай бұрын
Nice
@Chvndlxr4 ай бұрын
For anyone out there who’s worried about the price tag. Buy a cheaper set that works and will get most of your work done and over time build into a better set. (I’ve used my Ryobi ONE HP+ set for going on 2 years and only had an issue with 2 batteries and now I’m working on my Milwaukee set finally)
@ToolswithSoAlz
4 ай бұрын
Lol
@docj82577 ай бұрын
Never thought I would need a high torque impact as I have the mid torque...... then I got a boat...... had to grab the breaker bar and a pipe because the mid torque just couldn't do it.....
@elsmokoloko359710 ай бұрын
Hackzall > Sawzall Most trades don't need a 3/8 or 1/2 impact, idd replace that with a sds
@RichardGeresGerbil8 ай бұрын
Actually I would recommend the 12v range
@philliphall5198 Жыл бұрын
Like them all but allready have name brand stuff
@trevorx044810 ай бұрын
I think another must have is the electric ratchet
@ToolsDepotOnline4 ай бұрын
Always have Milwaukee by your side ❤️
@thomasboi3057 ай бұрын
❤️
@Eric-xn4ew10 ай бұрын
That's not a Milwaukee worm drive saw. It's just a rear handle worm driver style saw
@FloridaBoilermaker3 ай бұрын
They have some good stuff but the grinder they can keep it and I'll take the DeWalt.
@papawd39918 ай бұрын
My next tool purchase will be Milwaukee, I have avoided buying due to price, but after watching your videos I believe it will be worth paying a little more for quality design & power.
@ToolswithSoAlz
8 ай бұрын
Are you using them professionally?
@papawd3991
8 ай бұрын
@@ToolswithSoAlz No I’m retired, but stay busy using my various tools. I do upgrade stuff in general, carpentry automotive electrical plumbing for my family, kids, mother. Not professionally, but I believe I could if I needed the money, (not that I don’t)😅
@papawd3991
8 ай бұрын
@@ToolswithSoAlz Retired from a chemical plant (Eastman)
@ToolswithSoAlz
8 ай бұрын
Honestly I love Ridgid and that's what I would suggest. If you really want to go high end the yeah Milwaukee
@papawd3991
8 ай бұрын
@@ToolswithSoAlz Thanks very much, I’ll will keep that in mind…
@alcimarpapa8913 Жыл бұрын
Top demais aqui no Brasil tá muito caro demais abraço
@wackyweyland8857 Жыл бұрын
It's so sad how they lock them up to the point you can't even hold them... like they're displayed in a way you should, but because people are the way they are, they're better of showing pictures when you can't even move the product because it's chained up so bad....
@t.l.robinson21628 ай бұрын
I own all 5.
@ZEPR0FESS0RR9 ай бұрын
The super sawzall is too much like the standard fuel sawzall… you can get the fuel one and be very happy. The super cuts about the same but is heavier
@Farmertadhg11 ай бұрын
No it’s the impact ones are the best they get the job done
@ToolswithSoAlz
11 ай бұрын
Whatever you need to tell yourself
@jcsfive56708 ай бұрын
Got em all
@jerryjohnson148210 ай бұрын
Do they make one with the blade on the other side ,Skilsaw
@matthewhoffman924210 ай бұрын
Whats the difference between the regular sawsall and the super sawsall? Is it a orbital cut feature? Im on the dewalt platform primarily but recently got a couple milwaukee m12 tools and am curious
@ToolswithSoAlz
10 ай бұрын
Brushless with orbital
@allamerican512720 күн бұрын
I prefer gen 3 impact over new gen 4
@ToolswithSoAlz
20 күн бұрын
I understand
@LUCASPELUCAS7775 ай бұрын
Do you think the Brushless Non Fuel are worth it for the price? Especially for rookies getting into carpentry or automotives
@ToolswithSoAlz
5 ай бұрын
No, you're much better off going with Ridgid, or some other brand, for those guys
@drivinovru Жыл бұрын
It’s not a worm drive saw. Just a rear handle circular saw.
@unclefester4626
Жыл бұрын
Yeah...worm gear style rear handle. I have one. It weighs a ton and its supposed to have 12ah batteries to reach its potential. Good luck keeping a 12ah m18 battery functional for very long.
@62Cristoforo9 ай бұрын
What about the 12 Volt Hackzall? My favourite
@ryanle12938 ай бұрын
Your home Depot is so well lit what the?
@korvenburns1135 Жыл бұрын
What about a M12 hammer drill
@ToolswithSoAlz
Жыл бұрын
Ok
@oldmanSturzl Жыл бұрын
The rear handle circular saw is NOT a worm drive. Nor does it perform like one. It's just a sidewinder with the handle moved further back.
@ToolswithSoAlz
Жыл бұрын
Yup
@BStride7 ай бұрын
I did notice how everything is locked up nowadays guess that’s what they have to do to prevent theft
@hakeador4000 Жыл бұрын
No milwaukee rep at your depo??? Im sure they wouldve loved to help out with your video 😂❤
@ToolswithSoAlz
Жыл бұрын
Ok
@G19Jeeper Жыл бұрын
Hey man, curious on your thoughts on the Dewalt Kit #DCKSS400D1M1? Seems like a great deal at $249 at Lowes
@ToolswithSoAlz
Жыл бұрын
If you like it, get it
@G19Jeeper
Жыл бұрын
@@ToolswithSoAlz bought it earlier this morning. Figured 3 Brushless tools and 2 Batteries was too hard to beat.
@ToolswithSoAlz
Жыл бұрын
You were right, that's great
@unclefester4626
Жыл бұрын
When you get a chance get a stack lithium battery or two. You won't regret it.
@G19Jeeper
Жыл бұрын
@@unclefester4626 have a few, they’re alright
@tr3hy8603 ай бұрын
Personally not a big fan of the hammer drill/driver. As it drill its awesome, but the hammer mode sucks. Better off picking up the m12 rotary hammer if your gonna be drilling concrete more then once a month 😂
@aCiD0L26 ай бұрын
Dangit man! My wallet can only handle so much! lol
@ToolswithSoAlz
6 ай бұрын
Sorry!
@GertTown Жыл бұрын
Last week the 2804 was better than the 2904
@ToolswithSoAlz
Жыл бұрын
Bit they only make one of those today
@GertTown
Жыл бұрын
@ToolswithSoAlz my 3404 is keeping all the full size drills on the bench so far.
@ToolswithSoAlz
Жыл бұрын
Nice
@Jeremys_Garage5 ай бұрын
Dewalt has better impact wrenches
@elsmokoloko359710 ай бұрын
What are you using your 1/4 impact for?
@ToolswithSoAlz
10 ай бұрын
Small fasteners
@elsmokoloko3597
10 ай бұрын
@@ToolswithSoAlz I thought that's what the drills for?
@Danny-204 Жыл бұрын
I’m not sure, but I don’t think the circular saw is a worm drive, I think I might be just a rear Handel one,
@ToolswithSoAlz
Жыл бұрын
You're right
@woliver798 ай бұрын
I’m just missing the impact and rear handle
@sotastatesoulja6 ай бұрын
If anything starts and finishes with a sawzall, it will end up looking like a rickety mud hut 100% of the time
@kennethharrison4847 Жыл бұрын
Milwaukee ware my cordless pruners😢
@johnnychoque3487Ай бұрын
Milwaukee 2718-22 que precio cuesta??
@RonBurgandy Жыл бұрын
Milwaukee chocked and released a garbage impact wrench last year
@ToolswithSoAlz
Жыл бұрын
And they fixed it
@unclefester4626
Жыл бұрын
What? I have a 3/8 impact wrench from about a year and half ago? Details....i need details please!😳😳
@RonBurgandy
Жыл бұрын
@@unclefester4626 I forgot the exact name of the video, but the channel is called “torque test channel” the creator tested the 1/2in Milwaukee cordless impact wrench and then released a follow on video talking about the disastrous recall Milwaukee had on the late 2022 model
@unclefester4626
Жыл бұрын
@@RonBurgandy oh....delightfull. thanks. I am subbed to that channel. Ill go look it up. Another 3 1/2 months to get another tool fixed. Dee Freaking Lightfull... Thanks for the info!
@learningwithjuan Жыл бұрын
Yoho!
@ToolswithSoAlz
Жыл бұрын
Yo ho all hands, hoist the colors high
@GabrielRodriguez-zc7vj Жыл бұрын
More like 5 must have tools for apprentices
@ToolswithSoAlz
Жыл бұрын
I'm sorry they didn't have the 36v drilldo for you to drool over
@nielsduineveld2868 Жыл бұрын
Do for bosch
@ToolswithSoAlz
Жыл бұрын
I will try
@anatoliygolub5609
Жыл бұрын
bosch hacksaw can't cut through 4.0 SER wire. it's a no for me
@Anotherprickwithanopinion
Жыл бұрын
Bosch GET 75-150 (75-6n in US) is the best orbital sander that’s for sure. The Bosch expert stuff is best in class too I just need them to make impact driver bits
@netflix597211 ай бұрын
Why so cheap? In Italy we have doubled prices
@ToolswithSoAlz
11 ай бұрын
America represents nearly 50% of all tool sales in the world
@mikeznel6048 Жыл бұрын
I’ll send you my address to ship them to me lol.
@ToolswithSoAlz
Жыл бұрын
Lol
@mikeznel6048
Жыл бұрын
@@ToolswithSoAlz Hey you said must have lol.
@mikeznel6048
Жыл бұрын
Have you seen the new 72 volt stuff? That’s what I want. The tamper, buster, self deploying rocket light, sewer camera. Ahhhh maybe if I win the lottery.
@ToolswithSoAlz
Жыл бұрын
I did but never said must give
@mikeznel6048
Жыл бұрын
@@ToolswithSoAlz I identify as hearing “must have and I’ll buy and send them to you” now.
@chipcook66466 ай бұрын
What happened to Bosh?
@ToolswithSoAlz
6 ай бұрын
Not really sold at Home Depot
@ApacheLife-50 Жыл бұрын
Best combo, IMO, is the Gen4 hammer Drill with the Gen 3.5 impact. Don’t like the Gen 4 impact. 😤
@ToolswithSoAlz
Жыл бұрын
I can see that. Nothing has ever made me want to trade in a good Ridgid set though. Flex came the closest but is too heavy for regular use on the jobsite.
@unclefester4626
Жыл бұрын
I have the gen4 m18 impacter. Its been good so far and is stupidly overpowered. One of the few milwaukee tools i don't regret buying. The m18 framing nailer is one i absolutly do not regret one bit. God...its nice not dragging around air hoses and the fallout moisture compressors have.
@DreadfulDreamer6 ай бұрын
No go buy Flex reciprocating saw not Milwaukee.
@ToolswithSoAlz
6 ай бұрын
K
@owenmercer5443Ай бұрын
What do you do for work?
@ToolswithSoAlz
Ай бұрын
I'm retired
@owenmercer5443
29 күн бұрын
@@ToolswithSoAlz explains how you afford all these drills 😂
@ToolswithSoAlz
29 күн бұрын
Most of which were purchased long before I retired
@SGTSpliffer Жыл бұрын
I bought 3 milwaukee remote spotlights.....over $$$$4 grand and one is already dead in a month.
@ToolswithSoAlz
Жыл бұрын
Nice
@SGTSpliffer
Жыл бұрын
@@ToolswithSoAlz Milwaukee fixed me up....❤
@unclefester4626
Жыл бұрын
@@SGTSpliffer oh they'll fix their stuff....but at their leisure. 3.5 months for an m12 multi tool
@helomaniacapex61709 ай бұрын
If there “millwakee guys” wouldn’t they have the best of the best???
@ToolswithSoAlz
9 ай бұрын
K
@moosepasshippie10 ай бұрын
They need to stop calling those “hammer drills”. They are a joke trying to drill concrete. If you want to drill concrete get a real SDS hammer drill. The Milwaukee 12V is the Beez Kneez.
@thedevilhimself8952 Жыл бұрын
Not even close...
@ToolswithSoAlz
Жыл бұрын
Wow! Such an in depth and well thought out response.
@outdoors420 Жыл бұрын
I got the hammer drill drill it sucks just buy a hammer drill for hammer drill work
@ToolswithSoAlz
Жыл бұрын
Arr you confusing a rotary hammer with a hammer drill? Those aren't the same
@chadsummers79816 ай бұрын
I’m a union apprentice carpenter and the rear handle saw is garbage, we have all Milwaukee tools at our training center, do not waste your money on that saw, none of the tables are square from the factory, the plastic they’re made with feels like a nerf gun and they have a speed sensor that turns the saw into a brick if the blade isn’t at max rpm when you sink it into wood TERRIBLE saw for a rough carpenter, if you want a good skill saw get the 36v makita or 60v dewalt
@ToolswithSoAlz
6 ай бұрын
K
@ScarecrowMagic8 ай бұрын
I don't trust a guy who blindly tells you what powers tools you need without knowing what you even do.
@ToolswithSoAlz
8 ай бұрын
Ma'am you should get your husband to explain the video to you
@ScarecrowMagic
8 ай бұрын
@@ToolswithSoAlz makes personal attacks, dodges valid argument. Lol, thanks.
@ToolswithSoAlz
8 ай бұрын
Ma'am you whined like the little Karen you are, and you got treated like the little Karen you are.
@ScarecrowMagic
8 ай бұрын
@@ToolswithSoAlz Okay, let's pretend your advice is sound and I'm whatever you think a Karen is. Please explain why an impact wrench is a must have for me, since that was omitted from your video and I'm just not smart enough to figure it out on my own. Edit: typo sorry!
@kameljoe21 Жыл бұрын
So we go to home depot where they have the tools and you do not? FFS I have a whole line of ridgid tools and I am not going to switch to another brand as I still have 8 good working batteries.
@ToolswithSoAlz
Жыл бұрын
Ok
@Duane200410 ай бұрын
What I don't get is why are you recommending the cordless impact if your constantly proving how you don't need/use it
@ToolswithSoAlz
10 ай бұрын
No one ever said it didn't have a place. I said people overuse it and don't know how to use a drill
@Duane2004
10 ай бұрын
@@ToolswithSoAlz ah I see makes a little more sense Ive only watched a few of your vids
@ryanschaumleffel6321Ай бұрын
Let me sell my limbs so i can buy this and never get the use i need out of it.
@ToolswithSoAlz
29 күн бұрын
You shouldn't buy Milwaukee period.
@Jesusiskingamen710 ай бұрын
Just to let you know makita 40v smokes Milwaukee in impact and about everything
@ToolswithSoAlz
10 ай бұрын
I have already proven you wrong just accept that you love an inferior brand
@mattberg6816 Жыл бұрын
Those orbiting sawzalls are a pure gimmick
@ToolswithSoAlz
Жыл бұрын
Actually they work very well
@mattberg6816
Жыл бұрын
@@ToolswithSoAlz never cared for them. They bounce all over the place
@ToolswithSoAlz
Жыл бұрын
I understand that
@jon6969
Жыл бұрын
They literally don’t orbit though. I’ll make a vid tomorrow at work of me holding the trigger and turning the dial. No change at all. It’s a great sawzal don’t get me wrong. But its bs
@unclefester4626
Жыл бұрын
@@mattberg6816 are you getting the cut piece as close to the saw as possible?
@e_street77546 ай бұрын
That is 7 tools. Not five.
@ToolswithSoAlz
6 ай бұрын
K
@jonnymoke Жыл бұрын
Did somebody say hercules?
@ToolswithSoAlz
Жыл бұрын
I believe it was the Klump party
@jonnymoke
Жыл бұрын
@ToolswithSoAlz haha, fair enough. I started my own Milwaukee tool set but them ads come often from the other guys. They almost had me convinced, thanks
@ToolswithSoAlz
Жыл бұрын
No worries
@sawiv2215 ай бұрын
ارجوك اعطيني واحد 😣😣
@ToolswithSoAlz
5 ай бұрын
No
@sawiv221
5 ай бұрын
@@ToolswithSoAlz 😢😢😢😢
@Khaabkid3 ай бұрын
Nah. I have no use for those two.
@routefive2231 Жыл бұрын
that is not a worm drive saw
@ToolswithSoAlz
Жыл бұрын
Ok
@russellpenoyer818010 ай бұрын
Buy dewalt
@jeffg5579 Жыл бұрын
Milwaukee hammer drills are JUNK !!
@ToolswithSoAlz
Жыл бұрын
Not even close to the truth
@2121contreras
Жыл бұрын
Milwaukee is king get used to it bud.
@ApacheLife-50
Жыл бұрын
Haha
@darrenporsch
Жыл бұрын
Is he a slob of tools fans and thinks Bauer and Hercules are the best available 😂
@ToolswithSoAlz
Жыл бұрын
He has Dewalt guy written all over him
@spacemonkey1776b8 ай бұрын
Dewalts 60 volt line is impressive
@Joejoe-tv3hm Жыл бұрын
No good items
@ToolswithSoAlz
Жыл бұрын
Lol! Thanks for your...opinion
@djaa7 Жыл бұрын
So no consideration of what tasks one needs to do? Simply must have these tools? Bahahaha
@ToolswithSoAlz
Жыл бұрын
I look forward to you showing us how it's supposed to be done to appease little Karen idiots like yourself
@TheLastPharm2 ай бұрын
Didn't explain why we should have any of these tools. Useless video.
@ToolswithSoAlz
2 ай бұрын
Ma'am you should get your husband to explain it to you
@TheLastPharm
2 ай бұрын
@@ToolswithSoAlz That's the purpose of a decent short. Ask your wife, I'm sure even she would know that much.
@ToolswithSoAlz
2 ай бұрын
Ma'am I can lead you morons to knowledge but I can't do the thinking for you. Men actually know what those tools are used for
@TheLastPharm
2 ай бұрын
@@ToolswithSoAlz Is that really your line of reasoning? 😂 😂 😂 😂 Well, I tried, but I'm giving up. Another 'Do not recommend channel', along with the Chinese cheerleaders and cats. If you can't handle constructive feedback then your channel is of no use to me. Top of the day to you.
@ToolswithSoAlz
2 ай бұрын
How lucky am I? The trash is taking itself out
@reginogar18 ай бұрын
Clearly this guy is not in construction bussines hes a pusher with soft hands like a lil girl.
@ToolswithSoAlz
8 ай бұрын
Your husband says he loves your soft lips and deep throat
@guacamoleweiner698 ай бұрын
Is that Milwaukee hammer drill good for drilling bolts?
@ToolswithSoAlz
8 ай бұрын
No
@josephhujbar57609 ай бұрын
Look at those soft lil hands thanks for telling me which tools a girl uses
@ToolswithSoAlz
9 ай бұрын
Ma'am the only tool you've ever used your brother was born with and it's your favorite flavor. He does say he enjoys your soft lips and deep throat the most
@h.2787 ай бұрын
Electricians could use a screwdriver and they’ll be okay 😂😂😂 two turns and done
Пікірлер: 234
don't get pressured into buying the shiniest new toy. I'm an electrician and yes all my tools are Milwaukee but the basic brushless impact with a 2.0 battery is more than enough to drive little screws all day. I work circles around the guys that brag about their newest fuel with a 5.0 battery.
@unclefester4626
Жыл бұрын
You might consider the compact 3.0 high output batteries. They're small, light, and alot of ZING to them. That high output architecture is real. I have an m12 5.0 high output and i tried it in my m12 compact driver drill.....WOW what a difference. I was laughing hysterically afterwards. Like an angry chihuahua that's brave enough to pizz on a big dogs leg.😁
@atomsk1646
Жыл бұрын
I work as an hvac installer and use a m18 with 3.0 that runs all day. Really depends on what you do and from what i see electricians work really only calls for a smaller impact
@alexanderlangdon92
Жыл бұрын
Why drag around something heavy all day if a lighter tool does the job fine
@TheDarkestDestroyer
10 ай бұрын
I use an 8 cuz I'm not an electrician and a 2 will die in 30 seconds doing my job
@curtisyue182
8 ай бұрын
As someone who uses the rotary hammers on concrete on the regular, I highly recommend any M18 battery that says "High Output" on them. They enable your tool to work at full potential, its no lie. I use non-HO batteries trying to punch through the wall, and the tool falters and stops 10 seconds in. When I slap even the smaller high output battery on (3.0AH), it powers through like a champ.
My gen 3 impact gets lonely so I find myself Grabbing that on the field from time to time over the 4.
@PrisonMike-_-
Жыл бұрын
Same here hahaha
M18 Tire 🛞 Inflator as well..
@jessec.6101
6 ай бұрын
As a truck driver, it can easily handle truck tires. An absolute monster the M18 is.
@theshore2667
2 ай бұрын
Question, why pay to get a Milwaukee inflator when you can go into any oil change shop and get your tire inflated for free
@karstenalbers2255
2 ай бұрын
@@theshore2667 I can see a use case where you're in the middle of nowhere with a smaller leak and you need to top off the air until you reach a service point
@theshore2667
Ай бұрын
@@karstenalbers2255 I see that, in that case. It’s extremely useful!!
Absolutely agree on the rear handle circular saw. That layout where you can see the blade is so much better than the traditional design.
@ToolswithSoAlz
11 ай бұрын
Yes sir
Agree with this. When I first started my maintenance technician job these were the first 5 power tools I had and I was able to complete so many tasks.
@ToolswithSoAlz
Жыл бұрын
Thank you
M12 has plenty of balls for what I need
@SGTSpliffer
Жыл бұрын
That's my go to impact....m12
@danielshcherbakov3728
9 ай бұрын
Same! They deliver an amazing amount of power. I have an older impact m12 and hell, it’ll drive lags all day if you need it to. And the circular saw, I expected a lot less from it and oh boy, does it chew through 2x4’s like a beaver lol.
recently picked up the m12 fuel rotary hammer 5/8 love it so far
@ToolswithSoAlz
Жыл бұрын
Nice
I think it all depends on your application. I'm in the automotive field and use the m18 brushless and my dad uses the m12. I don't like changing the battery all the time and that's why I use the 18. My dad likes how light the 12 is with the 2.0s, as far as power they feel about the same to me.
I’ve had a lot of issues with that super sawzall’s oscillating/reciprocating movement. I mostly use it to cut cast iron and other hard metals and the chuck gets obliterated. Every time I switch blades it’s a struggle. The Vick release system on the standard sawzall is way better.
@icarustothestars
14 күн бұрын
Agreed. My co-worker as the super sawzall and I hate the blade locking system on it. It gets crazy hot if you need to change blades.
I started buying milwaukee tools after i found their big impact wrench on the road So far the best tool for me is their m12 drill with sleek 2A battery It fits nicely into tool bag pouch
@ToolswithSoAlz
7 ай бұрын
Awesome
I have all and absolutely agree with must have
My M12 fuel gen 3 drill and impact driver may need its M18 companion. I’ll get the Gen 4 M18 fuel combo kit whenever they have a good loss leader for one at HD.
@ToolswithSoAlz
Жыл бұрын
Well, stay tuned because I am constantly letting folks know about deals
@LUCASPELUCAS777
5 ай бұрын
I recommend getting the Regular Brushless M18, I just picked up the 2 pack drill and impact driver today for 189$ at HD, yeah it’s not a fuel but the price difference is huge and well worth it in my opinion. You can always upgrade later
I have a Milwaukee super sawzall from the mid-90s that is an absolute beast I don't believe they've made anything bigger or powerful than this one yet. It has 3,200 strokes per minute and 1 1/4 inch stroke. With adjustable orbital action. Comes with those plug-in chords unfortunately I have an older one that has a three chord 50 ft long cord which is incredible to have but the new ones don't come with a grounding peg so they can't use that on this particular saw because it only has 2 prongs. One of these days I'll probably pick up a 50 ft 2 prong cord but they're not exactly cheap.
@georged1085
7 ай бұрын
I may be interpreting this wrong but if you need a cord with 2 prongs you can just break the third one off
@jeffwolf8018
7 ай бұрын
@@georged1085 the 2 and 3 prong cords are not compatible with each other. You can only use 2 prong cord in a grounded sawzall and the three prong cord has a ground in it. Physically impossible to cut the third prong off and stick it in a Two prong cord if I'm understanding you right..
Love my fuel impact driver
I’m a Milwaukee guy and I have a dewalt impact wrench and it’s way better than Milwaukee equivalent. Milwaukee is definitely better tools for most part but having everything Milwaukee I don’t see beneficial give yourself options.
@karstenalbers2255
2 ай бұрын
It's too expensive to have 2 full battery brands, just buy into the one with more of the best tools you need and deal with the others. The power difference is usually pretty minor
can confirm the 2904 is a beast, but honestly their basic brushed 6-1/2in circular saw is just fine for me. I use the 6370 8in metal saw a lot more.
I like the surge it’s so smooth with its power delivery
Impact driver, 6.5 circ saw, multi tool hackzawl, hammer drill jigsaw can get you through most jobs
My gen 3 stuff still kicks just fine I'll upgrade when I eventually burn em up
Don’t ever trust a man talking about tools that has soft hands 😂
@ToolswithSoAlz
9 ай бұрын
Don't ever trust a moron leaving comments on videos they don't have the brains to understand
@Dpfdoctor
6 ай бұрын
@@ToolswithSoAlz Its nice to see you clap back at these idiots making comments from behind their screens, I would do the same
@ToolswithSoAlz
6 ай бұрын
@andymason2068 OH I see, a pickle puffing, pillow biter like you needs a resume because the only part of you that's ever been a man is the part another man put in you. Well, Honey, I used to build megawatt projects for the US military. So, not only do I know more than you, have done more than you, own way more than you, I am also better than you.
@ToolswithSoAlz
6 ай бұрын
@DanielMThomas I don't let these guys get away with things because it's pretty clearly the only job they are familiar with is the kind where they relax their throat and make eye contact. Lol
i’m a small engine mechanic i run m18 with the new impact with the high output 3.0xcp and it does me just fine allllll day
Have them all
@ToolswithSoAlz
8 ай бұрын
Nice
For anyone out there who’s worried about the price tag. Buy a cheaper set that works and will get most of your work done and over time build into a better set. (I’ve used my Ryobi ONE HP+ set for going on 2 years and only had an issue with 2 batteries and now I’m working on my Milwaukee set finally)
@ToolswithSoAlz
4 ай бұрын
Lol
Never thought I would need a high torque impact as I have the mid torque...... then I got a boat...... had to grab the breaker bar and a pipe because the mid torque just couldn't do it.....
Hackzall > Sawzall Most trades don't need a 3/8 or 1/2 impact, idd replace that with a sds
Actually I would recommend the 12v range
Like them all but allready have name brand stuff
I think another must have is the electric ratchet
Always have Milwaukee by your side ❤️
❤️
That's not a Milwaukee worm drive saw. It's just a rear handle worm driver style saw
They have some good stuff but the grinder they can keep it and I'll take the DeWalt.
My next tool purchase will be Milwaukee, I have avoided buying due to price, but after watching your videos I believe it will be worth paying a little more for quality design & power.
@ToolswithSoAlz
8 ай бұрын
Are you using them professionally?
@papawd3991
8 ай бұрын
@@ToolswithSoAlz No I’m retired, but stay busy using my various tools. I do upgrade stuff in general, carpentry automotive electrical plumbing for my family, kids, mother. Not professionally, but I believe I could if I needed the money, (not that I don’t)😅
@papawd3991
8 ай бұрын
@@ToolswithSoAlz Retired from a chemical plant (Eastman)
@ToolswithSoAlz
8 ай бұрын
Honestly I love Ridgid and that's what I would suggest. If you really want to go high end the yeah Milwaukee
@papawd3991
8 ай бұрын
@@ToolswithSoAlz Thanks very much, I’ll will keep that in mind…
Top demais aqui no Brasil tá muito caro demais abraço
It's so sad how they lock them up to the point you can't even hold them... like they're displayed in a way you should, but because people are the way they are, they're better of showing pictures when you can't even move the product because it's chained up so bad....
I own all 5.
The super sawzall is too much like the standard fuel sawzall… you can get the fuel one and be very happy. The super cuts about the same but is heavier
No it’s the impact ones are the best they get the job done
@ToolswithSoAlz
11 ай бұрын
Whatever you need to tell yourself
Got em all
Do they make one with the blade on the other side ,Skilsaw
Whats the difference between the regular sawsall and the super sawsall? Is it a orbital cut feature? Im on the dewalt platform primarily but recently got a couple milwaukee m12 tools and am curious
@ToolswithSoAlz
10 ай бұрын
Brushless with orbital
I prefer gen 3 impact over new gen 4
@ToolswithSoAlz
20 күн бұрын
I understand
Do you think the Brushless Non Fuel are worth it for the price? Especially for rookies getting into carpentry or automotives
@ToolswithSoAlz
5 ай бұрын
No, you're much better off going with Ridgid, or some other brand, for those guys
It’s not a worm drive saw. Just a rear handle circular saw.
@unclefester4626
Жыл бұрын
Yeah...worm gear style rear handle. I have one. It weighs a ton and its supposed to have 12ah batteries to reach its potential. Good luck keeping a 12ah m18 battery functional for very long.
What about the 12 Volt Hackzall? My favourite
Your home Depot is so well lit what the?
What about a M12 hammer drill
@ToolswithSoAlz
Жыл бұрын
Ok
The rear handle circular saw is NOT a worm drive. Nor does it perform like one. It's just a sidewinder with the handle moved further back.
@ToolswithSoAlz
Жыл бұрын
Yup
I did notice how everything is locked up nowadays guess that’s what they have to do to prevent theft
No milwaukee rep at your depo??? Im sure they wouldve loved to help out with your video 😂❤
@ToolswithSoAlz
Жыл бұрын
Ok
Hey man, curious on your thoughts on the Dewalt Kit #DCKSS400D1M1? Seems like a great deal at $249 at Lowes
@ToolswithSoAlz
Жыл бұрын
If you like it, get it
@G19Jeeper
Жыл бұрын
@@ToolswithSoAlz bought it earlier this morning. Figured 3 Brushless tools and 2 Batteries was too hard to beat.
@ToolswithSoAlz
Жыл бұрын
You were right, that's great
@unclefester4626
Жыл бұрын
When you get a chance get a stack lithium battery or two. You won't regret it.
@G19Jeeper
Жыл бұрын
@@unclefester4626 have a few, they’re alright
Personally not a big fan of the hammer drill/driver. As it drill its awesome, but the hammer mode sucks. Better off picking up the m12 rotary hammer if your gonna be drilling concrete more then once a month 😂
Dangit man! My wallet can only handle so much! lol
@ToolswithSoAlz
6 ай бұрын
Sorry!
Last week the 2804 was better than the 2904
@ToolswithSoAlz
Жыл бұрын
Bit they only make one of those today
@GertTown
Жыл бұрын
@ToolswithSoAlz my 3404 is keeping all the full size drills on the bench so far.
@ToolswithSoAlz
Жыл бұрын
Nice
Dewalt has better impact wrenches
What are you using your 1/4 impact for?
@ToolswithSoAlz
10 ай бұрын
Small fasteners
@elsmokoloko3597
10 ай бұрын
@@ToolswithSoAlz I thought that's what the drills for?
I’m not sure, but I don’t think the circular saw is a worm drive, I think I might be just a rear Handel one,
@ToolswithSoAlz
Жыл бұрын
You're right
I’m just missing the impact and rear handle
If anything starts and finishes with a sawzall, it will end up looking like a rickety mud hut 100% of the time
Milwaukee ware my cordless pruners😢
Milwaukee 2718-22 que precio cuesta??
Milwaukee chocked and released a garbage impact wrench last year
@ToolswithSoAlz
Жыл бұрын
And they fixed it
@unclefester4626
Жыл бұрын
What? I have a 3/8 impact wrench from about a year and half ago? Details....i need details please!😳😳
@RonBurgandy
Жыл бұрын
@@unclefester4626 I forgot the exact name of the video, but the channel is called “torque test channel” the creator tested the 1/2in Milwaukee cordless impact wrench and then released a follow on video talking about the disastrous recall Milwaukee had on the late 2022 model
@unclefester4626
Жыл бұрын
@@RonBurgandy oh....delightfull. thanks. I am subbed to that channel. Ill go look it up. Another 3 1/2 months to get another tool fixed. Dee Freaking Lightfull... Thanks for the info!
Yoho!
@ToolswithSoAlz
Жыл бұрын
Yo ho all hands, hoist the colors high
More like 5 must have tools for apprentices
@ToolswithSoAlz
Жыл бұрын
I'm sorry they didn't have the 36v drilldo for you to drool over
Do for bosch
@ToolswithSoAlz
Жыл бұрын
I will try
@anatoliygolub5609
Жыл бұрын
bosch hacksaw can't cut through 4.0 SER wire. it's a no for me
@Anotherprickwithanopinion
Жыл бұрын
Bosch GET 75-150 (75-6n in US) is the best orbital sander that’s for sure. The Bosch expert stuff is best in class too I just need them to make impact driver bits
Why so cheap? In Italy we have doubled prices
@ToolswithSoAlz
11 ай бұрын
America represents nearly 50% of all tool sales in the world
I’ll send you my address to ship them to me lol.
@ToolswithSoAlz
Жыл бұрын
Lol
@mikeznel6048
Жыл бұрын
@@ToolswithSoAlz Hey you said must have lol.
@mikeznel6048
Жыл бұрын
Have you seen the new 72 volt stuff? That’s what I want. The tamper, buster, self deploying rocket light, sewer camera. Ahhhh maybe if I win the lottery.
@ToolswithSoAlz
Жыл бұрын
I did but never said must give
@mikeznel6048
Жыл бұрын
@@ToolswithSoAlz I identify as hearing “must have and I’ll buy and send them to you” now.
What happened to Bosh?
@ToolswithSoAlz
6 ай бұрын
Not really sold at Home Depot
Best combo, IMO, is the Gen4 hammer Drill with the Gen 3.5 impact. Don’t like the Gen 4 impact. 😤
@ToolswithSoAlz
Жыл бұрын
I can see that. Nothing has ever made me want to trade in a good Ridgid set though. Flex came the closest but is too heavy for regular use on the jobsite.
@unclefester4626
Жыл бұрын
I have the gen4 m18 impacter. Its been good so far and is stupidly overpowered. One of the few milwaukee tools i don't regret buying. The m18 framing nailer is one i absolutly do not regret one bit. God...its nice not dragging around air hoses and the fallout moisture compressors have.
No go buy Flex reciprocating saw not Milwaukee.
@ToolswithSoAlz
6 ай бұрын
K
What do you do for work?
@ToolswithSoAlz
Ай бұрын
I'm retired
@owenmercer5443
29 күн бұрын
@@ToolswithSoAlz explains how you afford all these drills 😂
@ToolswithSoAlz
29 күн бұрын
Most of which were purchased long before I retired
I bought 3 milwaukee remote spotlights.....over $$$$4 grand and one is already dead in a month.
@ToolswithSoAlz
Жыл бұрын
Nice
@SGTSpliffer
Жыл бұрын
@@ToolswithSoAlz Milwaukee fixed me up....❤
@unclefester4626
Жыл бұрын
@@SGTSpliffer oh they'll fix their stuff....but at their leisure. 3.5 months for an m12 multi tool
If there “millwakee guys” wouldn’t they have the best of the best???
@ToolswithSoAlz
9 ай бұрын
K
They need to stop calling those “hammer drills”. They are a joke trying to drill concrete. If you want to drill concrete get a real SDS hammer drill. The Milwaukee 12V is the Beez Kneez.
Not even close...
@ToolswithSoAlz
Жыл бұрын
Wow! Such an in depth and well thought out response.
I got the hammer drill drill it sucks just buy a hammer drill for hammer drill work
@ToolswithSoAlz
Жыл бұрын
Arr you confusing a rotary hammer with a hammer drill? Those aren't the same
I’m a union apprentice carpenter and the rear handle saw is garbage, we have all Milwaukee tools at our training center, do not waste your money on that saw, none of the tables are square from the factory, the plastic they’re made with feels like a nerf gun and they have a speed sensor that turns the saw into a brick if the blade isn’t at max rpm when you sink it into wood TERRIBLE saw for a rough carpenter, if you want a good skill saw get the 36v makita or 60v dewalt
@ToolswithSoAlz
6 ай бұрын
K
I don't trust a guy who blindly tells you what powers tools you need without knowing what you even do.
@ToolswithSoAlz
8 ай бұрын
Ma'am you should get your husband to explain the video to you
@ScarecrowMagic
8 ай бұрын
@@ToolswithSoAlz makes personal attacks, dodges valid argument. Lol, thanks.
@ToolswithSoAlz
8 ай бұрын
Ma'am you whined like the little Karen you are, and you got treated like the little Karen you are.
@ScarecrowMagic
8 ай бұрын
@@ToolswithSoAlz Okay, let's pretend your advice is sound and I'm whatever you think a Karen is. Please explain why an impact wrench is a must have for me, since that was omitted from your video and I'm just not smart enough to figure it out on my own. Edit: typo sorry!
So we go to home depot where they have the tools and you do not? FFS I have a whole line of ridgid tools and I am not going to switch to another brand as I still have 8 good working batteries.
@ToolswithSoAlz
Жыл бұрын
Ok
What I don't get is why are you recommending the cordless impact if your constantly proving how you don't need/use it
@ToolswithSoAlz
10 ай бұрын
No one ever said it didn't have a place. I said people overuse it and don't know how to use a drill
@Duane2004
10 ай бұрын
@@ToolswithSoAlz ah I see makes a little more sense Ive only watched a few of your vids
Let me sell my limbs so i can buy this and never get the use i need out of it.
@ToolswithSoAlz
29 күн бұрын
You shouldn't buy Milwaukee period.
Just to let you know makita 40v smokes Milwaukee in impact and about everything
@ToolswithSoAlz
10 ай бұрын
I have already proven you wrong just accept that you love an inferior brand
Those orbiting sawzalls are a pure gimmick
@ToolswithSoAlz
Жыл бұрын
Actually they work very well
@mattberg6816
Жыл бұрын
@@ToolswithSoAlz never cared for them. They bounce all over the place
@ToolswithSoAlz
Жыл бұрын
I understand that
@jon6969
Жыл бұрын
They literally don’t orbit though. I’ll make a vid tomorrow at work of me holding the trigger and turning the dial. No change at all. It’s a great sawzal don’t get me wrong. But its bs
@unclefester4626
Жыл бұрын
@@mattberg6816 are you getting the cut piece as close to the saw as possible?
That is 7 tools. Not five.
@ToolswithSoAlz
6 ай бұрын
K
Did somebody say hercules?
@ToolswithSoAlz
Жыл бұрын
I believe it was the Klump party
@jonnymoke
Жыл бұрын
@ToolswithSoAlz haha, fair enough. I started my own Milwaukee tool set but them ads come often from the other guys. They almost had me convinced, thanks
@ToolswithSoAlz
Жыл бұрын
No worries
ارجوك اعطيني واحد 😣😣
@ToolswithSoAlz
5 ай бұрын
No
@sawiv221
5 ай бұрын
@@ToolswithSoAlz 😢😢😢😢
Nah. I have no use for those two.
that is not a worm drive saw
@ToolswithSoAlz
Жыл бұрын
Ok
Buy dewalt
Milwaukee hammer drills are JUNK !!
@ToolswithSoAlz
Жыл бұрын
Not even close to the truth
@2121contreras
Жыл бұрын
Milwaukee is king get used to it bud.
@ApacheLife-50
Жыл бұрын
Haha
@darrenporsch
Жыл бұрын
Is he a slob of tools fans and thinks Bauer and Hercules are the best available 😂
@ToolswithSoAlz
Жыл бұрын
He has Dewalt guy written all over him
Dewalts 60 volt line is impressive
No good items
@ToolswithSoAlz
Жыл бұрын
Lol! Thanks for your...opinion
So no consideration of what tasks one needs to do? Simply must have these tools? Bahahaha
@ToolswithSoAlz
Жыл бұрын
I look forward to you showing us how it's supposed to be done to appease little Karen idiots like yourself
Didn't explain why we should have any of these tools. Useless video.
@ToolswithSoAlz
2 ай бұрын
Ma'am you should get your husband to explain it to you
@TheLastPharm
2 ай бұрын
@@ToolswithSoAlz That's the purpose of a decent short. Ask your wife, I'm sure even she would know that much.
@ToolswithSoAlz
2 ай бұрын
Ma'am I can lead you morons to knowledge but I can't do the thinking for you. Men actually know what those tools are used for
@TheLastPharm
2 ай бұрын
@@ToolswithSoAlz Is that really your line of reasoning? 😂 😂 😂 😂 Well, I tried, but I'm giving up. Another 'Do not recommend channel', along with the Chinese cheerleaders and cats. If you can't handle constructive feedback then your channel is of no use to me. Top of the day to you.
@ToolswithSoAlz
2 ай бұрын
How lucky am I? The trash is taking itself out
Clearly this guy is not in construction bussines hes a pusher with soft hands like a lil girl.
@ToolswithSoAlz
8 ай бұрын
Your husband says he loves your soft lips and deep throat
Is that Milwaukee hammer drill good for drilling bolts?
@ToolswithSoAlz
8 ай бұрын
No
Look at those soft lil hands thanks for telling me which tools a girl uses
@ToolswithSoAlz
9 ай бұрын
Ma'am the only tool you've ever used your brother was born with and it's your favorite flavor. He does say he enjoys your soft lips and deep throat the most
Electricians could use a screwdriver and they’ll be okay 😂😂😂 two turns and done