The early GM, Ford and Chrysler motors were pretty simple beasts. As long as they weren’t locked up really bad with a bit of tinkering you can usually get them up and running. The starter motor tutorial was excellent. You’ve got a working motor and somewhere there is a bloke in a shed with an empty engine bay. Be a shame for her to not see the open road again. Your call. 👍

@unclebrentsshed4253

2 ай бұрын

Cheers mate thanks for the positive comments. Be definitely good to see it back on the road someday 👌🏽

@davidhayter8516

2 ай бұрын

Hey Brent, Repco has a special on cans of brake cleaner. 2 for $12 if you’re a member. Considering you run the FC on brake cleaner might save you a buck.😂

Pickle my Grandmother, great job mate, Nevil & I are impressed.

@unclebrentsshed4253

2 ай бұрын

Are you the real Ted bullpit lol ????

@Ted.Bullpitt.80

2 ай бұрын

@@unclebrentsshed4253 I'll have to ask that grubby little purple valiant driver that leaves all his greasy wog oil all over my driveway. lol

@Ted.Bullpitt.80

2 ай бұрын

@@unclebrentsshed4253 LOL mate, You'll have to ask that grubby little purple valiant driver that leaves his greasy w o g oil all over my drive way.........not to mention he doesn't pay for his beer. lol

Good to see it running I watched the episode when you picked up the old FC and I had a bet with my son that you will get it running now I'm $50 richer 😁. I picked up a fc last year that sat in a open tin shack of about 20 year's I hot wire it sprayed degreaser and it started straight away then I clean the carby put 45s Toyota hydraulic clutch master clean the slave , I was driving it around the block 2 days later with no break's ,

@markhorrell9213

2 ай бұрын

My favourite engine...tough as due to sloppy tolerances. I boiled mine after l hit a crow, it got that hot l could hear fluids boiling on shut down. Let it cool off overnight,topped it up n ran fine, that body got nailed, put it in another body for 3 years before selling it

@unclebrentsshed4253

2 ай бұрын

That’s a cool story man , thanks for following along 👌🏽👌🏽

Nice to see you get it going so easily. Hope you can salvage the motor and a few bits. Looks like it is beyond restoration😂. Loved your explanation of the starter motor. The FC was a nice Holden. Dad had a few. Wish we still dad them.

@unclebrentsshed4253

2 ай бұрын

Cheers , she has a few salvageable pieces 👌🏽

Awesome video. The starter education part was spot on mate. I'm impressed the old Grey ghost lives again. Tbh I'm not surprised it fired up because they are tuff old engines. Holden made good cars. I kind of feel sad the old girls body is dead . Anyway I enjoy the vids.

@unclebrentsshed4253

2 ай бұрын

Cheers brother , thank you 👌🏽👌🏽

@I.Live4oldcars.prospecting

2 ай бұрын

@@unclebrentsshed4253 very welcome 👍

Did the same thing with a VF ute I parted. Worth more running than dead. Used same idea for fuel tank except i was lucky fuel pump worked. Oh regarding the commutator, in a very past life as an armature winder, we would grind an arrow head into a broken hacksaw blade and use this to put a chamfer on the segments as you dragged it down the slot. On the other end of the blade we would grind a hook to clear the slots of overhanging copper.

@unclebrentsshed4253

2 ай бұрын

Awesome , cheers for that useful information. Thank you 👌🏽👌🏽

In my youth ' l owned many Holdens... FC FB FJ and EH.. So easy to work on.. l use to do most the mechanical myself. Those were the days..

@unclebrentsshed4253

2 ай бұрын

I bet you wish you still had all of those old cars in the shed 👌🏽

@saintjohnno

2 ай бұрын

@@unclebrentsshed4253 l sure do... l thought the same when l wrote that... 😊

Great explanation of how the motor works!

@unclebrentsshed4253

2 ай бұрын

Cheers , I try lol

Well done it runs so good. Aussie Grey motor. Yeah next episode: will it drive, Hell Yeah let go.

@unclebrentsshed4253

2 ай бұрын

Oooo that sounds like 1 person wanting me to drive it lol

Want a kit through that Stromberg. Very, very hard to kill the greys. I'm going to hazard a guess and say the body's slightly roo-ted.😁😁 Probably needs a drink too, cool off a bit. That front chrome work looks good, didn't see too many dings in it.

@unclebrentsshed4253

2 ай бұрын

The chrome is mostly pitted

Nice work Bloke. The old battle axe lives again !!

@unclebrentsshed4253

2 ай бұрын

Haha she’s minty 👌🏽

@tonymontana897

2 ай бұрын

@@unclebrentsshed4253 Would love to see it driving around mate. That would be hilarious 😂

That old sludgy still sounds sweet. Doesn’t seam smokey from the exhaust or breather ether. You’re the same as me, I’m sometimes a bit of a bush Machanic, (there are times when you have to be) I have “basically” and at times very basically repaired starters, alternators and a host of other things just to keep the wheels rolling. That part you filed using the drill on the armature I think is the slip ring? All though,I’m not an electrician either.Lol😂. I enjoyed watching your video..

@unclebrentsshed4253

2 ай бұрын

Thanks for turning in mate , she was definitely a bush mechanic episode lol Am glad you enjoyed 👌🏽

Excellent, it’s alive.

@unclebrentsshed4253

2 ай бұрын

And it sounds healthy

@timcoppinger3373

2 ай бұрын

@@unclebrentsshed4253 doesn’t it, amazing really.

I love how much input other GM divisions had on Holden , the 130 ci and 138 ci Grey Motors share much with the Chev Blue Flame Six , even later 130 ci , 138ci ( before anyone pipes up and says " there was no 130 or 138 red motor , they were LC Torana options , the 130 red only sold in LC s in Malaysia), 149 ci , 161ci , 173ci, 179ci , 186ci and 202 ci Red Holden Sixes share so much with the Chev Red 199ci, 250 ci and 292ci Six motors of the same period if they are not side by side good luck telling them apart , even though the Chev Sixs had Chev V8 Bellhousing pattern , just think of a LC or LJ GTR XU1 with a Chev Red 292ci or 4.9 litre Six , triple side draught webbers and a Saginaw 4speed manual, bolts rite in the same location, same mounts , gearbox length as aussie 4speed ( as this is were the aussie 4speed came from the Saginaw 4 speed) same output splines , linkage . That would be a cool different XU1 that with 4.9 litres would go hard , just put 186 stickers on the tappet cover , you would be hard pressed to find an Aussie mechanic who noticed the difference ! As for our early 253ci and 308ci Red V8s, well they are almost a copy of an Oldsmobile 307 ci to 403ci Small Block , these are the only 2 GM V8s to share intake port location and exhaust port location , same alloy rocker bridges , same 8 deg valve angles, same 153 tooth ring gear, same right hand side starter location , same intake design, the only difference is chev bore spacing .

@unclebrentsshed4253

2 ай бұрын

Wow that’s a wealth of information and knowledge right there , I can confirm the 138 red in a Torana as I have seen one in person . Also the input spline on the GM goes right back into the late 20s I believe . Cheers man , thanks for your input 👌🏽👌🏽

Top video,you've gotta love the old grey motors.She sounds good too

@unclebrentsshed4253

2 ай бұрын

Thanks mate 👌🏽

The name of the stuff getting in between the segments of the starter, after filing is "shit" you don't want any "shit" bridging the segments

@unclebrentsshed4253

2 ай бұрын

Haha so true 👌🏽

Nice👍👍

@unclebrentsshed4253

2 ай бұрын

Cheers mate 👌🏽

Would be cool to see it drive - even just for a few feet!

@unclebrentsshed4253

2 ай бұрын

Yes I agree

Nice result😁. Uncle Brent’s pickapart? Should be fun whatever you do. Cheers from NZ🇳🇿.

@unclebrentsshed4253

2 ай бұрын

Haha cheers mate 👌🏽

Good job telling the inexperienced people NOT to hit the solenoid casing. I knew that it was the brushes that caused the ‘click of death’. Any time I take a hammer to a starter motor, I avoid the solenoid and give the motor casing a decent tap.

@unclebrentsshed4253

2 ай бұрын

Cheers mate, one thing I forgot to mention was when the brushes are worn and the solenoid doesn’t click in , that’s a built in safety so you don’t send full power to the bushes and blow holes in your armature 👌🏽

@michaelguerin56

2 ай бұрын

@@unclebrentsshed4253 A bit like telling people that it isn’t ether which kills an engine, it is continued use of ether instead of fixing the engine that destroys it😁.

Well done uncle. I was pretty sure you’d get it running👌

@unclebrentsshed4253

2 ай бұрын

Cheers man , thanks for the support 👌🏽👌🏽

@robcantwell1981

2 ай бұрын

@@unclebrentsshed4253 no worries at all mate. I enjoy the vids you make. Even better that your only around the corner from me. I’m on the Yorke Peninsula and travel past yours often on my way to Lincoln. So it would be rude if I didn’t support a local bloke like yourself. Keep it going 👍

Great parts car for a restoration

@unclebrentsshed4253

2 ай бұрын

That’s exactly right 👌🏽

nice work Brent, your dad would be proud of the work your doing here❤ you should go show Pattie thats the grey ghost is runnin again, n mayb get some start ya bastard for the next 1 😂

@unclebrentsshed4253

2 ай бұрын

Cheers mate , I seen her today actually and told her it runs , she was quite surprised ☺️

Like a new one🤣❤️🦘🦘🦘🇦🇺

@unclebrentsshed4253

2 ай бұрын

Cheers mates

Absolute banger.

@unclebrentsshed4253

2 ай бұрын

Haha cheers

My first car was a 59 FC from my Grandfather even though he was not a Holden man back in 73 in the Hunter Valley I drove it on my l s 😀my Dad and his dad drove Mopars and my uncle and old brother who brought a new 2 door Pacer in Dubbo in 1970 . So the FC had to go 🤔and on came my first Valiant a AP5 followed by my younger brothers also buying Valiants . Even so that old FC was in good nick still in 73 . A time when the auto industry was so much more simple . Bets any lap top 🚮 today . 👍🏻🇦🇺.

@unclebrentsshed4253

2 ай бұрын

Definitely can’t beat the old days mate 👌🏽

Just liked an subscribe here in the UK mate

@unclebrentsshed4253

2 ай бұрын

Cheers, thank you brother 👌🏽

Just fix the door gaps, a bit rubber and bit of cutting polish and it will ready for rego

@unclebrentsshed4253

2 ай бұрын

That’s basically what I was thinking 😅👌🏽

This clip will go to the Holden boys head you never hear 👂 the end of it 😂🤣.

@unclebrentsshed4253

2 ай бұрын

Yes unfortunately 😅😂🤦🏻

Well done guys 👍

@unclebrentsshed4253

2 ай бұрын

Cheers , thank you very much 👌🏽

Hope you see next video

@alikhanmohdyuosop6005

2 ай бұрын

Are you going to make over that Holden

@alikhanmohdyuosop6005

2 ай бұрын

Are you going to make over that Holden

@unclebrentsshed4253

2 ай бұрын

No mate , it’s going to get parked up 👌🏽

Gotta drive it...

@unclebrentsshed4253

2 ай бұрын

I know right

Could drive it but the subframe walk away from the body pretty quick

@unclebrentsshed4253

29 күн бұрын

Yeah she’s to far gone

File Is too aggressive, 4:39 better use sandpaper.

@unclebrentsshed4253

2 ай бұрын

Yes but I really needed to get the section flat , as it was badly deformed

Body isn't half bad at all!!

@unclebrentsshed4253

Ай бұрын

Half bad , half rust and half metal lol

Just put some air in the tyres and she on the road lol

@unclebrentsshed4253

2 ай бұрын

That’s what I’m thinking 😂😅👌🏽

Mr you restoration that fc holden

@unclebrentsshed4253

29 күн бұрын

No sir , it’s to far gone

🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺 COOL AS FUCK 😎

@unclebrentsshed4253

2 ай бұрын

Cheers brother 👌🏽