Timestamps First look at the 60mm tires: 0:33 60mm size comparisons: 4:56 First look at the 68mm tires: 6:16 68mm size comparisons: 7:55 First impressions on the rigs: 9:32 Indoor course runs: 14:13 Rock crawling: 28:02 Final thoughts: 38:13

@nickhathaway4617

Жыл бұрын

Hey man flub makes 68mm inserts? I've had the 68 ones for a while now and love them but been trying to find inserts stop the sidewall roll

Awesome content Adam, great tires. SLAYER kicked butt!!!! . Keep the videos coming bro.

Slayer with the 68s are a killer combo!

@CapeCrawlers

Жыл бұрын

Agreed!

@438fpv

11 ай бұрын

Any info on the chassis? Who makes it

@Fisherthedog1

3 күн бұрын

@@438fpvit is an injury chassis not sure the name

Awesome review. I went and got the 68mm mud studs and i swear it made my scx24 like a whole new rig lol. They are amazing. Thanks again.

@curtis.250

6 ай бұрын

my mud studs will not stay in the bead when mounting them no matter what., any advice?

That thing is crawling like on a slight slippery slope but nails it-impressive man -

on the slayer you should make the servo a motor to make it look like a old school hot rod that would be sweet

Man, your course looks beaten up. You should redo the paintjob. But this time, go for CONCRET an maybe some picments in it, to couldermatch it. That should take your course to the next level! And you can do a couple on Videos on ist!

I really love that TRX4m comp chassis! Just looks great, plus all the mounting options. Is there an SCX24 version of that chassis?

Awesome comparison

@CapeCrawlers

Жыл бұрын

Thanks for watching!

I got some Rc4wd Beadlocks and on your c10 how did you fix the problem with the wheel extensions and the screw not fitting in the hole to tighten the wheels onto the truck? I figured it out

The Studs look insane on the Slayer. Josh @texomarc just did such a unique approach to a comp/performance specific design. Total out of the box thinking. I'm sad they aren't viable to get up here. Would love if at some point he would just sell the print files for non-US folks. Fingers crossed!

Hey Axel. I really like your green h2 hummer truck. 👍🏼👍🏼

That Slayer setup is sweet. I ordered one, have a Cedar/Python Pro combo to go in it, might have to get some big ole rubbers!

Man the Texoma Slayer is a performance monster, and you can get a semi scale look by running a bidy on it, rip till ya flip!

@CapeCrawlers

Жыл бұрын

It's a total savage

Great show, brother!

@CapeCrawlers

Жыл бұрын

Thank you sir!

even tho i would never run the traxxas canyon tires they sure do look good design wise

My opinion you don't want your tires to squish like that not that much I feel like it creates a problem even if let's say you got the nose up over a rock and you get your tires up over it and they start conforming but yet they could form too much and instead of pulling a truck up over they just twist up that's kind of what I have experienced and I got these big tires

Hey Adam, Any update on the 68MM Mud Studs with Flub inserts? Curious if you liked them better with those inserts. I'm running comp pins on my rig but am considering trying these.

That rust bucket rig pops up and rides high from torque and steering twist. Settle it down with some rubberbands and/or more overdrive 👍

Just for the heck of it could you maybe make a yt short with the 68mm tires on a trx4m defender as well as the max smasher! 😂

Hi! Awesome tire compare video!If you had to choose one for performance, injora 65mm pin comp or the 68mm dj tires? Thanks

@CapeCrawlers

Жыл бұрын

We'll see after I get the FlubRC inserts in the 68mm. Right now I feel like the 65mm pins still have an advantage because of the inserts and also because they are skinnier. You can squeeze through tighter gates with the Injora's. The 68's add another ~5mm of external width, which could negatively impact your overall performance on a course.

All are on Amazon right now

Where can i get the dj 1213? They are unavaiable everywhere. Great vid as lways

what portal axles do you have on the trx4 m build?

@CapeCrawlers

Жыл бұрын

The new Treal axles

Man, that thing sits so low....dang! 😲 Looks good bro. 🤙🏻

@CapeCrawlers

Жыл бұрын

Thanks! I love the profile

@RCCrawlerz209

Жыл бұрын

@@CapeCrawlers hell yeah! 🤙🏻

How much were the Dj crawlers I live in the NW an it’s all ways wet out I need a good wet tier?

@CapeCrawlers

5 ай бұрын

They are ~$16 I think. And I would say yes, you should get a tire that works best for your conditions

I need you opinion. I’m doing a deadbolt length 3d printed body tire options I have idk if I’ll clear the 60mm dj crawler or a 57mm Lgrp swamp king. I need a professional opinion

@CapeCrawlers

7 ай бұрын

Hard to say without seeing the chassis. I would suggest trying them both to see for sure

@dawber2111

7 ай бұрын

Also ordered the 64mm swamp kings so if they clear with the wide axles imma use them. Also don’t get fan mail or somewhere I could try sending something for you to do a review on? Got a 3d printed chassis id send you for free to do a review on. You could build it however you like.

I like em all 💯👍

What wheels are on the slayer

@CapeCrawlers

6 ай бұрын

Mofo RC DDP wheels

Hey Adam great video, do you think the big 68mm tires would work on the tarantula injora body?

@CapeCrawlers

11 ай бұрын

Thanks! I think they would as long as you had negative offset wheels or spacers to bump the tires out from the chassis a bit. Otherwise I could see rubbing at full steer

@alanblock6968

11 ай бұрын

Ok thanks

Can you put the 6×6 on the wave

@CapeCrawlers

Жыл бұрын

I need to replace the motor first. I tried the rcawd one 😬

Do a danchee rigdrock

Do you have any tips for being a KZreadr and making content because Im relatively new to KZread and want to improve my videos

@CapeCrawlers

Жыл бұрын

Oh man, I could write a book on this. Here are some high level pointers: Have fun and be authentic; dont be afraid to show your mistakes; do not let perfection be the enemy of progress, just keep getting better each video. Choose a direction for your channel: are you going to educate? Entertain? Both? Carve out a niche and stick to it consistently. Invest in good light and sound, then do your research on how to setup the light and sound. Engage with your audience and listen to their feedback (even if it hurts). There's tons of valuable insight there. DO NOT GIVE UP. Stick with it, even if it feels like no one is watching. Just focus on getting better and better each video.

@crawlerking1234

Жыл бұрын

Thanks

What inserts for the 68mm tires? From flub.

@joseywilds3133

Жыл бұрын

He ain’t ganna answer you, it’s a paid channel!😂

@CapeCrawlers

Жыл бұрын

Chris at flub said the new V6 slymeballz are made specifically for these 68mm’s. That’s what I ordered 👍🏻

@zip2692

Жыл бұрын

@@CapeCrawlers thanks. Just ordered a set.

@pik2490

Жыл бұрын

@@joseywilds3133😅😅😅

If they make the mud stud in 63. Holler at me.

Yeah but didn't you say the Slayer is super long and you got the biggest tires on it not saying nothing against the Slayer I love the build you have the advantage

There’s a picture running around in Facebook of two supers swamper tires side by side . One is stock the other has been cut/Trimmed threads out that’s what those new swappers are even the trim cut between the threads is seen 🫶🏽👍

Why does nobody like the rc 4wd mudslingers? I have had them on my deadbolt since I did my build and not only do I love them but when I'm out in public driving it (like at red rocks in Colorado) everyone always is blown away buy how capable and how much flex and sticking I get out of my zip tie construction.

@CapeCrawlers

Жыл бұрын

I have them on my sons deadbolt and love them. I trimmed the lugs and made them extra gnarly. They’re great tires!

@Callmebutturblk

11 ай бұрын

It’s not nobody like them but it’s always sold out hard to get, rc4wd mud slingers are the best performance tires I have..

@ChrisMaybury-mn2kk

11 ай бұрын

@@Callmebutturblk I need to get a few sets than! Ya I like them but I have little experience with lots of tires.

@ChrisMaybury-mn2kk

11 ай бұрын

@@Callmebutturblk I feel lucky I found them first lol

Lol just get the scythe Furitek with micro Komodo instead buying 3d printed plastic parts that you have to put together😂

I'm I the only one that finds it weird they called them "Mud Studs"? They don't look like a mud tire. More like "Rock Studs". Nice looking tire anyhow.

Thank you so much for trying I was really wondering if it could do it cause me personally, I would build a whole warthog build just for it to drive upside down. Thank you.😂😂😂

@CapeCrawlers

Жыл бұрын

I thought afterwards that if I had the flat roof and not the domed roof for the komodo that it would probably run upside down!

@LARANUD

Жыл бұрын

Yea most likely

Be honest Warhog vs the Slayer?

@CapeCrawlers

Жыл бұрын

I think the slayer would take it. I’m going to do a big shootout soon!

Well Go Big Or Go Home LOL

Man I'm a huge fan of spektrum but that lil esc and motor combo is straight trash bro. Furitek, mofo, and many others have the brushless game down..sorry to say but mini hulk deserves better, tear that weakass set up out and shelf it for good or at least until V2s or updates come out cuz GOOD LAWD THATS BAD 👎

@CapeCrawlers

Жыл бұрын

Your comment has inspired me to do a complete overhaul of the C10, including the motor. Stay tuned for V3 of mini hulk!

Big dogs? There is a bigger tyre......trust me

@Tipman2OOO

5 ай бұрын

😂

Um hellooooo lol. The 68ml pin tyre is NOT the biggest. I have had them all for a while now. its the other 1s. They same height but 1ml wider. Why is NO1 BUYING THE ACTUAL BIGGEST TYRE? Your all weird