Wow what a difference! That’s such a satisfying click into gear with no guessing if it’s in gear

Genuinely happy for you man. Long time coming. It will be nice to enjoy the car again

Following what you been through has really help me choosing the right direction for a transmission. Just set up my appointment for my T56 swap at Mustang Magic. Almost went with a Calimer Stage 3 but your vids made me really dig and find out the nightmare stories. Its a garbage platform no matter who builds them. Thanks for the honest feedback.

@CoyoteProductionsBoss302

Ай бұрын

Cool, you will love the trans. Be sure to respect the break in period and then some. Trans is super quiet and shifts like butter. Also handles the power really well. U don’t need to change to a short throw either. The Tremec shifter is great! I just went to 4:10 again and the car and trans is a great pair. Happy to help!

@twistymcfistysback

Ай бұрын

@@CoyoteProductionsBoss302 Awesome thanks for the feed back, I'm going with the 4:10's also Went with the McLeod RTX twin disk since i'm about 700 wheel. Defiantly going easy ion the break in with the price of this swap. And yeah I was waiting to see how the stock shifter was before I ordered the MGW.

@CoyoteProductionsBoss302

Ай бұрын

Ok at 700 hundred wheel the 3:73 might be spot on. Try them first it should work perfectly with that set up

Happy you're enjoying the car 😎👍

Great meeting you the other day! Love the car!!!!!

@CoyoteProductionsBoss302

11 ай бұрын

Thanks Bill and likewise!!

Your car is fn awesome 👌 love it. What gear are you going with out back? These are geared way longer than mt82 so if you wanna keep it close to the way 373 was before you're prob gonna need like a 4.30 or 4.56 gear to compensate. I'd do a 4.10 even if it's boosted the gearing is WAY longer on a tremec compared to an mt82. Such a sick car.

@CoyoteProductionsBoss302

11 ай бұрын

Thanks I appreciate that! So right now I have 3.73 and yes they are pretty tall. Tremec converter shows 4.10s are pretty close to the Calimer ratio and I already have the 4.10 gear. I’m going to wait until I install the heads and Boss Racing cams before I do the gear change. It’s a drivers car right now and I’m liking that. LOL

We missed the car too.

How do like your Continental tire, is this the 4 season DWS 06 on the rear is the traction excellent on dry asphalt will it hook decent how is the handling good also. That is a good transmission with reliability. Happy for you.

@CoyoteProductionsBoss302

11 ай бұрын

I love them, however, I have the extreme contact which is a summer performance tire. I believe the tire you are talking about might come standard on a Hellcat.

My T56 xl magnum install on my sons 2017 Mustang is a complete nightmare so far. It’s gonna be four months still not right taking it to a speed shop to un blank it. Car grinds every gear loud clicking noise putting clutch in with car not running. Modern driveline swap kit with McCloud rust.

@CoyoteProductionsBoss302

9 ай бұрын

Sorry to hear this. Hopefully your warranty will cover the issues.

@JWard2

17 күн бұрын

Did you fix it?

Awesome car man. I'm looking at putting the magnum in my vehicle, what is the 6th gear ratio on your magnum and what do you think of it for cruising on the highway.

@CoyoteProductionsBoss302

4 ай бұрын

Thanks, 6th gear is 0.63. It’s a great transmission for cruising, very smooth and pleasant to drive. I cruise 70 mph at 2000 rpm with 3.73 gears and > 27” tire. Top speed in 4th gear is 124 mph at 7500 rpm. Copy the link and paste it into your browser. It’s the Tremec gear ratio calculator. www.tremec.com/calculadora.php

@crosscountrykid9817

4 ай бұрын

Thank you for the info!@@CoyoteProductionsBoss302

Hey I just got my Magnum XL along with the new clutch. Where did you get yours installed??

@CoyoteProductionsBoss302

2 ай бұрын

I had Scottie’s auto do my install here in Battle Creek Michigan. Your supplier you purchased or contact Tremec and they can help you with installers in your area. I highly recommend the Tilton throw out bearing. It’s adjustable and depending on your clutch set up you may need one. Did you get the Bowler kit that converts your MT82 digital signal to the analog signal for your Tremec.

@Zaeholmes25

2 ай бұрын

No sir I just purchased the whole swap kit off lethal performance along with the Mcleod RST clutch

A great car with very expensive and sensible changes. A Mustang is allowed to make noise and vibration. It's not a Porsche where everything is perfect from the factory.

Great car! What kind of gear do you have in the rear? Also what is you first gear ratio on your temic XL?

@CoyoteProductionsBoss302

8 ай бұрын

Right now it’s 3.73 and a 2.97 first gear. I plan on moving to a 4.10.

@peterg6638

8 ай бұрын

​@@CoyoteProductionsBoss302 i have a s550 i was thinking about the tremic XL. I have 3:31 at the rear now should i change them to 3:73?

@CoyoteProductionsBoss302

8 ай бұрын

@@peterg6638 are you boosted? The link below will help you determine what gears you need. I recommend you have the conversation with your supplier on the close ratio gear Tremec which I believe is 2.66 first gear. The 2.97 first has a 3rd gear rpm drop. Do your modeling with the link below. www.tremec.com/calculadora.php

@peterg6638

8 ай бұрын

@@CoyoteProductionsBoss302 i am not boosted. I am looking to buy a tremic XL. I need recommendations on which one should i get the 2.66 first gear or the 297?

@CoyoteProductionsBoss302

8 ай бұрын

@@peterg6638I would go with the 2.66 first gear this is the close ratio transmission. You will need to go to a 4.10 or lower. If you don’t care about how fast is your car the the 2.97 first is a very nice driving trans. Here’s another link that might help. Maybe an opportunity for me to do a video on this. www.grannasracing.com/blogs/news/t56-magnum-close-ratio-vs-wide-ratio-which-is-best#:~:text=The%20proper%20way%20to%20do,usually%20being%20the%20sweet%20spot.

Can you provide more detail on Scotty's Auto like location or website? Thanks

@CoyoteProductionsBoss302

8 ай бұрын

Hi yes, They don’t have a Website here’s their address & phone M-78, Battle Creek, MI 49017 269-968-2090

Love mine too. They should have come this way from the factory. Mines holding 1200 hp.

@CoyoteProductionsBoss302

11 ай бұрын

That’s a lot of power!

@skullhart

11 ай бұрын

@CoyoteProductionsBoss302 Yeah I have a short uploaded on my channel

@s550sammy

9 ай бұрын

is it a stock t56?@@skullhart

@skullhart

9 ай бұрын

@@s550sammy yes

@s550sammy

9 ай бұрын

holy shit, im just bolt ons but got my kit installed and its grinding/locking out 24/7 since I got it so now I gotta wait 5 more weeks for this shop to reinstall it ig. i heard a lot abt it not being that bulletproof and thought it might be too much for the price but seems like that's not the case@@skullhart

What did you do to the mt82

@CoyoteProductionsBoss302

8 ай бұрын

Well it was bad, but I sold it before I knew it was bad bc I thought the cracked clutch was the problem. I shipped it to California and refunded the guys money bc it made the same noise. I shipped it to BC and they found 2 gears that had a bad wear pattern which was not my fault. They would not warranty it and wanted $2000 to fix it and ship it back to me, had 4000 miles on it. BC gave me $1200 for parts. I wasn’t happy that they didn’t warranty gears as promised.

@fredocastillo6984

7 ай бұрын

@@CoyoteProductionsBoss302 so you would not recommended a stage 2 from bc for the mt82

@CoyoteProductionsBoss302

7 ай бұрын

Sold it back to Calimer for parts. He wouldn’t give me the true value even though the bad gears were on him.

@CoyoteProductionsBoss302

7 ай бұрын

@@fredocastillo6984you can try some people had good luck. Stage two has stock gears and will still fail. Just depends on how you drive and your add ons for power. There’s a shop in Texas that did Bosworks. Check him out on IG, it’s a white Boss, hit him up and he’ll tell you the shops name.

@pheonixfps9248

Ай бұрын

​@CoyoteProductionsBoss302 heard nothing but drama's for yhe last 12 momths about calimers quality going to shit, and not honouring warranties. I wouldn't touch one unless it was free.