Gambateh, from Malaysia too!✌️

@PatrickOhm

3 жыл бұрын

❤❤❤❤

damn I think I've watched every dio build video on KZread 3 times over.... I remember this was a good one though👍

Fantastic 👏👏👏👏👏👏👏👏

@PatrickOhm

4 жыл бұрын

Thank you, you are too kind

great! thank you.

@PatrickOhm

4 жыл бұрын

And thank you for watching, appreciate it 😁😁🙏

Amazing

@PatrickOhm

3 жыл бұрын

Thank you 🙏🏻

I found out about your channel yesterday and I'm already digging it! I've been into miniature painting, and now that I'm collecting action figures again (I haven't collected from 2009 to 2019) it's a great time to learn how to craft my own dioramas. Thanks a lot for these videos!

@PatrickOhm

3 жыл бұрын

Hey welcome back to the world of action figures, haha thank you so so much for checking out my videos, much appreciated my friend ❤

@XileH

3 жыл бұрын

@Mario Van you got that right no one cares, has nothing to do with the video! And your fake account to reply as well as if it working ain’t scamming anybody! lol

very good

@PatrickOhm

4 жыл бұрын

thank you verymuch =)

this really helped me out with my brick wall and fire escape

@PatrickOhm

3 жыл бұрын

Thanks for watching 😁😁

Nice! Looks fantastic. I did a wall and added on the fire escape plant stand. Loved the piping effects

Awesomeness

Pretty dope! The way the video is put together made it seem very easy.. the process of it being made looks good.

@PatrickOhm

3 жыл бұрын

Hey thank you for your kind words buddy

Awesome 👏

@PatrickOhm

4 жыл бұрын

Thank you for watching 😁🙏

Welcome back and awesome tutorial as always 👍👍👍

@PatrickOhm

4 жыл бұрын

Thank you for your warm welcome back, hahaha yea been away for too long, needed to get my ass off to work again 🤣

Awesomd video, I have learnt a lot from this, please keep it up cheers

@PatrickOhm

4 жыл бұрын

Thank you so very much for your kind and supportive words 😁😁👌🏻

Awesome. Thanks for doing this, I learned a ton and the way you lay it down at the end as though the camera was looking up is genius, and the little angle you put on it is a nice effect.

@PatrickOhm

4 жыл бұрын

Hehe thank you for your kind words my brother, this is the only way to get your figures climbing on a wall without using a stand, haha anyway glad u enjoy it, appreciate you watching, thank you so very much 🙏🙏🙏

You're touching my heart ❤ with your Gundam merch 😁🤘👌

@PatrickOhm

4 жыл бұрын

Hahahaha oh thank you for noticing, hahaha yea use to wear that to gundam events, use to before I got fatter, now I can't wear them in public 🤣🤣

THANK YOU! I will now save hundreds of dollars for the diorama ideas I have that would cost me a lot to buy them custom. Learning how to do the brick wall was something I wanted to learn. The rest is easier to improvise 🙂

@PatrickOhm

4 жыл бұрын

Hey I appreciate your kind and supportive comment my friend, thank you, glad this video can help 😁👌🏻

Nice to see you back, as always awesome work!! Love the fire escape, great idea with the zip ties!!

@PatrickOhm

4 жыл бұрын

Hey thanks alot bob, it took me hours to edit and post this, been so long since I edited and the software is so foreign to me now, hahaha

Excellent. I was thinking of using stock images for the outside of a building but might just make it myself now I have seen this.

@PatrickOhm

4 жыл бұрын

Yes you should, it is so convenient to use, and make sure you print them in A2 or you will suffer, I use to snap pics with laptop screen to A4 to A3, at the end A2 will save alot of trouble, print the basics would do, city scene / galaxy / clouds

You are an inspiration! Thanks buddy!

@PatrickOhm

4 жыл бұрын

Thanks alot bro 🙏

this rocks

Amazing work as always patrick! so good to see your new work, keep it up!

@PatrickOhm

4 жыл бұрын

Thank you for sticking around bro, will try to come up with more content in the future and put more time into my videos, thanks for watching 😁👌🏻

Great work Sir, well done!

nice simple build👍👍👍

@PatrickOhm

4 жыл бұрын

Thanks bro, really helps with photography, and best way to create a simple building without spending too much time creating a literal building dio

Well crafted and very inspiring 👍

@PatrickOhm

4 жыл бұрын

Thank you my dear brother 😊🤘

I liked this one.

Good Tutorial, thank you very much Man 😎👍🏻

@PatrickOhm

4 жыл бұрын

And thank you for watching 🤭🙏

Fantastic job sir 🤜🏻🤛🏻

@PatrickOhm

4 жыл бұрын

Thank you my kind sir 🖖

Ohm-my gosh that's soooooo dope bro! Glad to see you back at it!

@PatrickOhm

4 жыл бұрын

Hey hey my man, thank for being here since the beginning, will be back with more videos, mostly filmed and still waiting to edit, will try not to rest too long this time 😓🤣

@exploitofdeleted5864

4 жыл бұрын

Its all love my dude! Thanks for noticing 🤜🤛

@PatrickOhm

4 жыл бұрын

@@exploitofdeleted5864 and thank you my brother

Dope work and creativity. New Sub. 👍🏼

@PatrickOhm

4 жыл бұрын

Hey thanks alot, really appreciate it alot 🙏🙏🙏💕💕💕

Keep it up!!!

@PatrickOhm

4 жыл бұрын

thanks for watching bro

¡¡Nice to meet you again !!

@PatrickOhm

4 жыл бұрын

Like wise bro likewise

AWESOME MAN !! AGAIN !!!!!!!!

@PatrickOhm

4 жыл бұрын

Hahaha thank you my dear brother , appreciate it alot

yessssssssssssssssssssssssss finally well done/good work patrick

@PatrickOhm

4 жыл бұрын

Hey brother, thank you for your generous "yes" hahaha appreciate it alot, more contents coming up soon, will be editing all the videos I've been filming these past months

@stephenclarke7433

4 жыл бұрын

ty

Why haven't I subscribe to you earlier... Now I'm subscribing

Awesome work but was hoping to see proper pictures of it completed as we only saw a few close up shots. Keep up great work.

@PatrickOhm

3 жыл бұрын

Sure thing, actually I do have more shots of this on my instagram , you can check em out there, sorry I didn't attach it to this video because I only took some extra shots of this weeks after the video was uploaded

Love it! Still learning how to make dips only made one so far. But where did you get the sky back ground from? Is it just a print out?

@PatrickOhm

4 жыл бұрын

yes just a print out, found them in google. just hav to search for clouds and change your settings to "large file" or "HD" before saving/printing =)

Amazing awesome job man. Your work is crazy good! Do you have any ideas for a build a straw replacement piece? I can’t find a build a straw anywhere.

@PatrickOhm

4 жыл бұрын

I had this same question once, I think the only way to make it happen is to literally use a normal bendable straw, but know this, you won't be able to get the "L" and "T" connectors

Merci je m'abonne directement 👍

This is really well done! I made my first diorama tonight, and I'd really like to share/ get some feedback. I'm hoping one day I'll be able to make them as high quality as you!

@PatrickOhm

4 жыл бұрын

Wow thank you for your kind words my friend, really appreciate you watching 🙏👌🏻

Very nice, I try to build my own as well, where did you get that foam tho, and have you ever built a danger room, I built mine last year but after seeing your tricks and tips I feel I can do better, thanks

@PatrickOhm

4 жыл бұрын

Awh thanks for your nice comment bro, anyways danger room has always been my plan but never came around to do it, maybe will do it soon, but yea I got my foam from a place called ArtFriend in Malaysia, it's the best foam I can get here, I cant get access to blue foam here, we have it but it is very damn expensive

@chrisjordan8109

4 жыл бұрын

@@PatrickOhm I'll look into using that foam, but yeah once I finished my danger room it started getting really hard not to stop and take a moment to pose an xman, hope you get around to making it, I subscribed to ur channel and look forward to ur content, thanks again

Cool. What do you call that straw connector and where to get it? Thanks

Hello! Great video! Can you post some links of the products you use so I can get a better idea of the quality and type of product? Would be very helpful!

@PatrickOhm

4 жыл бұрын

Problem is I got my stuff from the dollar store and there is no specific link to what I use, my video concept is to use cheap everyday products to create dios 😁🙏 but however if I do come across any links to what I'm using, I will be sure to add a link, thank you for watching and thank you for the suggestion 🤟🏻🤟🏻😁😁

Are 1/8 inch balsa squares wood by 12 inches fine to use for this ? It’s for my 1/12 tmnt line diorama

What are you dimensions of the balsa wood sticks?

Loved the tutorial!! Just curious though..the Nightcrawler picture at the end, what did you use to create the bamf effect?

@PatrickOhm

4 жыл бұрын

Thanks for watching, appreciate your words, anyway I used cotton and sprayed it blue 😃✌️

@blakecrawley7728

4 жыл бұрын

Patrick Ohm appreciate it!! After I asked I saw your Green Goblin glider video and put two and two together haha. I’m starting work on a diorama soon so all of this helps out a lot.

First off, I love your content. I’ve watched most of your videos. The THP foam you use looks like a great foam to work with. Does it go by another name? I can’t seem to find it.

@PatrickOhm

4 жыл бұрын

So sorry bro, I dont think there is another name for it, but I use that foam only because it is the easiest best foam I can find in my area in malaysia so I have no choice but to use THP, but however if you are located in the US, u would suggest u to get blue foam instead, and thank you for watching my videos, I really really appreciate it 🙏🏼🙏🏼🙏🏼

@HarvestDisseminator

4 жыл бұрын

Patrick Ohm Thanks for the reply and the recommendation. It’s a real pleasure communicating with you. Your work is so dope! Thanks for the inspiration!

@PatrickOhm

4 жыл бұрын

@@HarvestDisseminator thank you for your humble and encouraging words my friend and it is a pleasure speaking to u as well, stay safe🙏 cheers brother

Not for nothing but you could have done a black wash before you painted the bricks.. let dry then dry brush the brick color.. will save a ton of time also looks more realistic... also what I have been doing is using quick patch for patching dry wall and putting it on then wiping off to give it a REAL brick all look... it’s also a lot faster and the results speak for themselves

@PatrickOhm

4 жыл бұрын

Hmm thanks for the tip, yea and I have heard of that method as well but never applied it..🙏 will try to do that if I have another brick related video 🙏🙏

Hi there. Years ago i did a wall diorama but dont remember the size of the bricks in scale 1/12, i saw you say you use 2cm x 0,5cm but it looks more big to me in the video, thats right?

@PatrickOhm

3 жыл бұрын

This is a question I have been asking around as well, I seem to get alot of different answers, which is why now what I do is measure by an action figure's foot, one foot equals one brick, by estimation, haha

Great job! What did you insert into the wood, those metal looking pieces?

@PatrickOhm

4 жыл бұрын

Those are corkboard pins, because glue takes very long to cure and dry, chose this method to make things quicker hahaha

@CarlosMartinez-fm8xn

4 жыл бұрын

Patrick Ohm got you thank you so much! 🙏🏽🙏🏽🙏🏽

@PatrickOhm

4 жыл бұрын

@@CarlosMartinez-fm8xn np at all, anytime bro👌🏻👌🏻👌🏻😁

Nice work, whats the name of the ruler you used for the brick work?

@PatrickOhm

4 жыл бұрын

It's called grid ruler, art ruler, some call it trans ruler, heard many names 🤣 but mostly use the term grid ruler

How thick are the wood sticks?

I’m gonna start my first diorama this month, any tips?

@PatrickOhm

3 жыл бұрын

Would suggest you try out brick wall first, once you get the hang of it, you might be able to create more other stuff

What kind of tool you’re using to make the lines?

Hey may i ask where to find the pink foam? I cant find it anywhere

@PatrickOhm

4 жыл бұрын

I got mine from ArtFriend 😊👌🏻

@yangarif

4 жыл бұрын

Thank you plus ur videos helped me alot in building dioramas but still i cant scale exactly for Marvel Select figures haha thank you 🙏🏻

@PatrickOhm

4 жыл бұрын

@@yangarif hahaha it is all about estimation bro and i get what u mean, haha maybe you can try something that i do, for example if you want to know window and door height, try measuring yourself to a door and that way, you can get a better estimation =)

Doe the foam have a plastic on it or is it just normal foam and what thickness did you use? Is it more of an art foam board or is it used for building houses like this www.homedepot.com/p/Owens-Corning-FOAMULAR-1-2-in-x-4-ft-x-8-ft-R-3-Square-Edge-Rigid-Foam-Board-Insulation-Sheathing-36L/100320356

What size balsa wood is that

What color paint did you use for your brick wall?

@PatrickOhm

3 жыл бұрын

I am using a premixed color, basically what i did was mix 20% black with 80% orange and keep adding white till I get the tone I want 😄👍🏻

@christophermartin9347

3 жыл бұрын

Nice I’m trying to do this for my sixthscale figures haha

where did you find your thp foam?

@PatrickOhm

3 жыл бұрын

Depends on where u are from, I got them from an art store near my place, I'm located in Malaysia, but if you are from the US, I suggest u get blue foam instead, that is the best

@gavinmorgan4671

2 жыл бұрын

What core is it? 3mm ?

where you buy your built a straws ?

@PatrickOhm

4 жыл бұрын

I got mine from toys-r-us in malaysia, they have alot here but not for all outlets, hope with the straw type name I gave u can help you online 🙂🙏🏼

@chewiescraft2956

4 жыл бұрын

@@PatrickOhm thanks :)

@PatrickOhm

4 жыл бұрын

@@chewiescraft2956 no problem at all brother

Can you make the inside of it?

What are the pipe /straw connector things called lol ?

That song is from my intro

@PatrickOhm

4 жыл бұрын

Really? Ah what a coincidence 😄

If you always do the bicks the same size can you not make a jig for the straight lines....would save you hours

@PatrickOhm

4 жыл бұрын

Not quite sure what u mean..

@cheeseface99

4 жыл бұрын

@@PatrickOhm say 4 pins equal distance apart on a rule then drag it along creating 4 lines at a time instead of one, sorry if my english is not great its my first language!

@PatrickOhm

4 жыл бұрын

@@cheeseface99 oh sorry, haha no worries at all, anyway I think I understand what you mean now, thank you for the great idea 🤘🏻👌🏻

@cheeseface99

4 жыл бұрын

@@PatrickOhm no problem glad i could help!

@PatrickOhm

4 жыл бұрын

@@cheeseface99 cheers bro 😊🙏

Any instagram??

@PatrickOhm

3 жыл бұрын

Yes bro, @patrickohm_dios 😁👌🏻 but at the moment I'm more occupied with ultraman photography 😁🙏 I still do marvel/dc shots from time to time

@syafiqzaini5880

3 жыл бұрын

Alright broo im totally amaze yr dioramas huge tumbs up broo ..

@syafiqzaini5880

3 жыл бұрын

Soo legitt

@PatrickOhm

3 жыл бұрын

@@syafiqzaini5880 thank you my friend, you are too too kind, appreciate it 🙏

@syafiqzaini5880

3 жыл бұрын

@@PatrickOhm aite broo stay litt my friend

wear a watch much bro? lol