Dom... YOU WERE RIGHT! "It had so much torque, the chassis twisted coming off the line!" (Barely kept it on the dyno😮)

@wyattjackson977

5 ай бұрын

The exact first thing I thought too

@JustDriven

5 ай бұрын

All the torque.

@Jay-jb2vr

5 ай бұрын

*"It doesn't matter if you win by an inch or a mile, winning is winning"*

@mikecrystalrobert7898

5 ай бұрын

But still not enough for a wheelie burnout 😂

@mr.waxkyojawbaxk9

5 ай бұрын

@@mikecrystalrobert7898this could actually be done if more horses were in

Thank you for not putting music during the dyno session ! That v8 makes perfect music 👌

@JustDriven

5 ай бұрын

We hope you enjoyed the sounds of the V8. The Supra isn't as easy to do this with. At lower speeds the Supra sounds like a Camry. The Charger sounds like a beast at pretty much any speed.

that's an insane torque band lol never seen one like that

@JustDriven

5 ай бұрын

What this first dyno lacked in horsepower...it sure delivered on torque!

@user-rx2kv5jw9m

5 ай бұрын

MOPAR OR NO CAR BABY!!!

@Grimgrak1

5 ай бұрын

Thats because no one starts at dyno at 3500rpm except these asshats

that charger is gonna look insane next to the supra. can’t wait to see the iconic train race soon

@JustDriven

5 ай бұрын

We might just leave the train out of this race though. The big truck too.

@frvshmdia

5 ай бұрын

@@JustDriven noted

nothing better to watch than KFC Collonel and Robbie Williams building a huuuge supercharger on a cammed V8! love it

@JustDriven

5 ай бұрын

You should see our full build on this Charger. Lots of fun characters in there.

@xtremeboost7

4 ай бұрын

Huge? Lol

Just throwing this out there to try and be helpful, as it was mentioned, you will DEFINITELY want a burst panel or a pop-off valve. You could have one false start and permanently damage both the blower and even the valves on your motor without one. Another side note with your idle issues and concerns about not moving at idle, I recommend getting a higher stall converter for the transmission so you don't have to try and choke the motor to keep it under control. Tons of great companies out there can make a torque converter with the correct stall for your application if you tell them what your setup is(engine combo, transmission, rear gears and tire size etc). Blowers are good fun but can go south quick if you don't take the right precautions, wish you guys the best of luck with this build! EDIT: I did see the comments regarding the intake and you guys have one on the way, good to hear. If you really want to get down to the nitty gritty, you can contact people from TBS, RBS, Good Vibrations Motorsports, etc etc for tons of helpful blower info.

@JustDriven

5 ай бұрын

Thank you! All great points and helpful advice. We have a converter on our radar for sure. We’ve built many cars over the years but quite frankly this is our first Blown Hemi build. But we’re getting there. Thanks again! 🙏🏻

@bockhouse

5 ай бұрын

If nothing else, because that was my first thought as well was how could there be no burst plate, it will still do damage... But at least put sheer studs and straps on it in the meantime. Although I would imagine by now they have a new plenum.

Man how i love these outtakes

@JustDriven

5 ай бұрын

Haha...We try and give everyone a little insight into our shenanigans.

You guys are the best, I just enjoy watching you all have fun

@JustDriven

5 ай бұрын

Thank you so much!

Incredible...just incredible! Guys! Thx

@JustDriven

5 ай бұрын

Thank you for watching!

Rick sounds like the type of guy that you could strike up a conversation about cars and engines with over a beer, and next thing you realise you've just drained the whole case of beer.

@JustDriven

Ай бұрын

He was so great to talk with. A true wealth of knowledge.

Badass!!!!!!!!! Awesome as always you get a new sub!!!!!!

@JustDriven

Ай бұрын

Heck yah! Thank you so much!

Thanks for putting the correct generation hemi in it ! When I saw that old 392 gen 1 in the movie I almost cried the Chevy guys didn't know why I was upset all I told them was the distributor is in the back . Still think they don't get it

@JustDriven

5 ай бұрын

We tried to nail the look but somethings we can't fake (like the distributor).

@user-fs6de9vd4o

5 ай бұрын

Looks like it should have !!! Movie people don't know. Nice job!!!!

Dom:You know what's her best time 1/4 miles?9 second flat

@JustDriven

5 ай бұрын

We just got it tuned for the first time...so nope.

Perfect replica from movie everything you found is great amazing.😮

@JustDriven

5 ай бұрын

Thank you! We have a few things we plan on changing already.

Awesome content as usual... but at 15.59, that's a work of art master of tetris. Lol

@JustDriven

5 ай бұрын

We had a lot of fun that day...dude is a stacking master!

When the charger and Supra are finished you should do a video where the cars have a rematch drag race.

@JustDriven

5 ай бұрын

We really want to do this but we'll just leave out the train and the big truck.

@Sdukes001

5 ай бұрын

Gotta be in Long Beach

@JustDriven

5 ай бұрын

San Pedro?

The engine sound is music to my ears 👍

@JustDriven

5 ай бұрын

Same! It sounds so good.

Awesome video!!! Thanks ✅

@JustDriven

2 ай бұрын

Thank you for the view and the comment!

Simply a fabulous build! Please don’t take this as nitpicking. I’m just curious, was there a technical reason behind going with the Weiand blower over the Mooneyham? Again, Bravo!! Well done! You knocked this one out of the ballpark!! ❤

@JustDriven

5 ай бұрын

The Mooneyham wasn't available. It was on a perpetual back order and we still don't know if they ever solved their supply chain issues.

Been waiting to see this for 25 years.

@JustDriven

5 ай бұрын

Your wait is over. Thanks for the watch.

Sounds like a BEAST!

@JustDriven

5 ай бұрын

It IS a beast.

Automatically goes to my most favorite videos here on KZread

@JustDriven

5 ай бұрын

Heck yes! Thank you!

WOW It looks and sounds exacly like in the movie! Can't wait to see it drag race with SuuuuuupraAAA! :) great job !

@JustDriven

5 ай бұрын

Thank you so much!

At first I was skeptical when the old timer was talking about the burst plate on his 500 C.I Hemi.... And then this man proceeds to just nonchalantly show his 500 C.I Hemi like it's a model engine he put together from a kit.. Remember kids, never judge an old timer by the length of his pony tail because he might just have a 500 C.I blown Hemi in his garage lol

@JustDriven

5 ай бұрын

Just sitting in the shop. Under a tarp. Waiting for a car to put it in. Engine first...car later.

@seansdriveway

5 ай бұрын

@@JustDriven and someone probably told him he was crazy and should’ve sold it 30 years ago. What a world we live in

@JustDriven

5 ай бұрын

Or trade it for a Tesla. haha... or two.

@joshreynolds729

5 ай бұрын

Always something to be learned from old timers who grew up with this tech they know all the tricks. Pays to have a friend like that. Usually good people and you learn a lot and gain connections. These are very helpful people because these parts are very hard to find today, they don’t make them and most of the time it’s an old shop that made it or some famous racers shop who doesn’t race and the shop closed or something like this. So this is where the connection helps. Learn from these people as much as you can.

@JustDriven

5 ай бұрын

We are pretty convinced if you took an X-ray of Rick you'd find he's running on Hemi power.

Big Torque as well with 900 Horsepower. 9:58 Corn Juice.. that funny.

@JustDriven

5 ай бұрын

We were hoping for more power but we completely didn't factor in 940 lbs of torque at 3500 RPM! That was just instant power.

@FaridFauzan2405

5 ай бұрын

@@JustDriven Big displacement of V8 pretty much insane. Big V8 advantage most I known was Torque.

The end of this is perfect. Always be open to advice from others ❤

@JustDriven

5 ай бұрын

We are always open to others opinions and advice. We are not perfect. Thanks to Rick's advice we are installing the part this week.

As a big FNF fan, I appreciate these builds so much! Thank you, Just Driven! It would be amazing to see Dom in this beast! ❤❤

@JustDriven

4 ай бұрын

We are glad to oblige! We love them too that's why we treat them with all the respect.

I'm a big fan of that car. I have everything in models and toy cars of it. Very cool bro.

@JustDriven

5 ай бұрын

Awesome! We love it too.

Love to see a Richard Holdener review of this setup :D

@JustDriven

5 ай бұрын

We would welcome the insight and perspective!

Nice Hemi perfect platform for her. Tons of torque and tons of fun.

@JustDriven

5 ай бұрын

This is our first blown Hemi build. We are learning a lot.

@jsharp1776

5 ай бұрын

​@@JustDrivenawesome have fun with your build.

Hey, that was Steve Brule back there. What up big dog? Still got your tune and the engine is running fantastic.

@JustDriven

5 ай бұрын

Oh nice! That's so cool.

What mufflers did you guys use? It sounds amazing!

@JustDriven

5 ай бұрын

It was a custom exhaust build from our friend Richard at BSide Fabrication.

Sounds like a beast

@JustDriven

5 ай бұрын

Pretty tough right?

Jd is there a video how you set up the rear end?

@JustDriven

5 ай бұрын

There is not. Sorry. The engine and drivetrain were setup by Hawaii Racing. If you watch our first video on this build we talk about what we were thinking about putting into this build with Joe from Hawaii Racing.

So much torque I bet the chassis twists coming of the line xD

@JustDriven

4 ай бұрын

Exactly.

Awesome! How much hp do you think it will make when tuned perfectly? Should be around 900+?

@JustDriven

4 ай бұрын

We are pretty happy with the tune right now. It has so much power we wouldn't know what to do with more (besides brag about the number). We will see if we end up all agreeing on adding different pulleys or not.

It made pretty good torque, but overall I’m not impressed with the 700 horsepower. Guys are getting well over 1000 horses out of a small block Coyote with stock block, heads, and cams. For the money and with how bizarre this Hemi looks, it just isn’t over-the-top as I was expecting…… Sick build nonetheless! It looks just like Doms car from the movie!!

@Jay-jb2vr

5 ай бұрын

Keep your expectations in check. It's not about the horsepower.

@JustDriven

5 ай бұрын

We went with a tune that will keep the car on the road since it’s got many plans for the immediate future and drivers not so experienced with Big Power. Pulley changes and a different tune will easily push this car over a thousand, which is evident by the torque it made, with just this tune. Just wait for future videos. Once the car has met its obligated uses. Some minor changes and tweaks will make all the Horse Power People very happy. 👍🏻

@karlsracing8422

5 ай бұрын

Yeah top fuel is getting 11,000hp out of a Hemi.

@hoedemakerbart

5 ай бұрын

​@@karlsracing8422yeah with Nitro methane and way different parts that's a whole other ballpark

@DamionG1987

5 ай бұрын

Then you don't know anything about streetable engines. That's a lot of HP for a street tune on a very old school setup.

Awesome ending!!

@JustDriven

5 ай бұрын

Glad you liked it.

Hell yes amazing!

@JustDriven

5 ай бұрын

Thank you!

I can't wait to see it at the sema❤

@JustDriven

5 ай бұрын

It'll be great to have both cars there this year. Just need to find someone to take us in.

727hp. That's a depressingly low horsepower figure for an engine this expensive and this hyped. I've seen 900+ out of a blown junkyard 454. Granted, I don't know how long that 454 was going to last. The caltracks are a welcome sight. I hope you take what that old dude with the ponytail says to heart

@JustDriven

5 ай бұрын

We don't think it's depressing. Not all of us anyway. With those torque figures we can't be sad. We have plans formulating already and we will be taking Rick up on his knowledge.

@kyle8952

5 ай бұрын

@@JustDriven Meeting him seems like it was a very humbling experience. First he finds two safety problems, then casually makes more power out of a smaller motor with less boost. I've had the same experience working in electronics many times.

@xtremeboost7

4 ай бұрын

It looks like a dinky 6-71 blower and a wiend who makes junk. I bet with a better blower it would make way more. I can't hate too much, I can't afford either.

@kevinpatrick8788

2 ай бұрын

Its the torque that gets you that hard launch off the tree .

@JustDriven

23 күн бұрын

Yes it is.

Man i love this charger

@JustDriven

26 күн бұрын

So do we!

Now can it do a street wheelie?! ❤

@JustDriven

5 ай бұрын

With 940 lbs... Maybe?!

That thing deserves a Hub dyno!

@JustDriven

5 ай бұрын

It was slipping the rollers a bunch. We talked about a hub dyno but we are worried it might snap one of the input shafts on the dyno with the torque and the twisting. This felt safer.

Undisclosed location huh? I’m guessing these cars are going to make an appearance in the new instalment of the F&F franchise- hope I’m right!

@JustDriven

5 ай бұрын

Wouldn't that be awesome!?

@lancebirkett3842

5 ай бұрын

@@JustDrivensubtle with your response. 🤔

Can you guys build the war rig from madmax fury roads?

@JustDriven

5 ай бұрын

Oh heck yah! That would be a cool build.

Moving the injectors into the intake runners to care of a lot issues. Quite the task to do this but paid great dividends.

@JustDriven

5 ай бұрын

We have a video we are working on explaining the dyno issues we encountered and how we overcame them or plan to correct them coming soon.

Damn, I hope that dyno was over 18!

@JustDriven

5 ай бұрын

👀

I love the sound of a super charger the way it wines

@JustDriven

4 ай бұрын

Us TOO!

Damn man hurry up get that car in my garage I love it

@JustDriven

5 ай бұрын

You'll need a long garage! This thing is a big boy.

wicked

@JustDriven

3 ай бұрын

Totally.

that thing sound insane love it

@JustDriven

4 ай бұрын

It really does! It's so awesome!

@fordfairlane5002

4 ай бұрын

@@JustDriven you guys gotta do a burnout with it full send

Can’t believe you guys are only at 60k subs!

@JustDriven

5 ай бұрын

Right? Where is everybody? *crickets chirping*

@LeeP2165

5 ай бұрын

@JustDriven I'm in the UK and stumbled across your supra video, watched all of that then came straight here! Fantastic content! I'm sure the subs will come, keep it up! Love it!

@JustDriven

5 ай бұрын

Heck yes! Thank you so much for the support and the confidence. We appreciate you!

What a monster 👍🏻

@JustDriven

5 ай бұрын

🤘🏼🤘🏼

Check out Nelson racing if West Tech is not able to deliver for the schedule time.

@JustDriven

5 ай бұрын

We actually might have some work for Nelson Racing soon. Thanks for the advice.

Are we gonna see a real race between this beast and supra like FF1 and see whos gonna win would be iconic,I would love to see that,I really do enjoy your chanel

@JustDriven

5 ай бұрын

Thank you so much! We have a lot of logistics to iron out before a showdown can happen. This Charger is a tough cat to control. You are correct though. The race would be very close.

A trick I've used a hundred times, spraying ether or carb cleaner around the motor looking for vacuum leaks. Never seen that on a KZread video before, had to comment.

@JustDriven

5 ай бұрын

Yah, we wanted to give people a little insight into what goes into tuning a car. Too many people think it's done in an hour or less. Not an entire day or even longer.

I am smiling so hard my face hurts.

@JustDriven

5 ай бұрын

Go ice that face! Thanks for watching.

It must be difficult getting the timing right on this thing hard to say if it wants more timing or not

@JustDriven

5 ай бұрын

It was the air coming in that was making the idle tune a huge PITA. We will explain what Ismael discovered in a later video. It's now finally all smooth. Our burst panel should be here this week and installed next week. So already making some changes from when this video was wrapped up.

What a monster

@JustDriven

5 ай бұрын

A big scary monster.

The old timer seems to know what he is talking about. Wonder what the NHRA guys think about the pressure release?

@JustDriven

5 ай бұрын

Assuming they don't want to reverse rotate their superchargers they're probably very much into the pressure release plate.

💪🏻🙌🏻💯

@JustDriven

5 ай бұрын

🤘🏼🤘🏼

But how come the tires arn't smoking on the dyno like they do in the movie. I thought only turbo cars start dynos at 3500rpm to hide the lag?

@JustDriven

5 ай бұрын

There was a fair amount of dyno slipping happening. We still have some more work to do before we do a rematch on the dyno again.

Good stuffff 👍 NEW FOLLOW

@JustDriven

5 ай бұрын

Thank you so much for the support!

Beautiful man The perfect muscle car

@JustDriven

4 ай бұрын

We agree! Thank you.

That is one of the most beautiful machines I have ever seen however that is the most heavenly machines I have ever HEARD, Good LORD. I BELIEVE THIS MIGHT TOP THE SUPRA AND I LOVE THE SUPRA, BUT THIS IS JUST........DUDE beautiful, it sounds exactly like the movie

@JustDriven

5 ай бұрын

Yah, we are still debating amongst ourselves which would win. The Supra has the more horsepower and could hook up faster, but the Charger has ALL the torque and at only 3500 RPM.

@tubu1ar86

5 ай бұрын

@@JustDriven incredible, just be careful if you do race them, these are serious machines wear your seat belts 😄

@JustDriven

5 ай бұрын

Seat belts for sure.

Any updates on the charger or no?

@JustDriven

5 ай бұрын

Nothing yet. We will have some updates coming in the next few weeks.

Great video of an improperly tied down car.

@JustDriven

4 ай бұрын

Thanks for watching.

That thing is stoopid 🤘🤘 i want it 😂 my dream car besides an 80s countach is a 69-70 charger. Enjoy that beast. Watching it twist on the dyno, holy crap 🤘🤘

@JustDriven

5 ай бұрын

Oooo.... An 80s Countach would be fun!

Beauty!!!!!!!!!!!!!!

@JustDriven

3 ай бұрын

It sure is!

@Schabik1990

3 ай бұрын

@@JustDriven My dream car, but as much as I love the supercharger I prefer a Charger without one.

@JustDriven

3 ай бұрын

It's definitely much easier to see out of the windshield without one.

@Schabik1990

3 ай бұрын

@@JustDriven Yup, but I'm just a fan of "pure original body look" kind of guy If I would own one 😁 I hate too much body modifications like the mustang hoonicorn, and the one inspired by it and made by 425 motorsports.

"We're not worthy! We're not worthy!"

@JustDriven

5 ай бұрын

You are worthy! Thanks for the support.

I would love to see that old hotrodders motor in that car.

@jeremywillis7407

5 ай бұрын

It wouldn't be accurate then.

@JustDriven

5 ай бұрын

We could think of some other cars we'd rather see it in. We love the motor in the Charger right now.

Are you going to finish the 1970 charger soon ?

@JustDriven

4 ай бұрын

It's so close to being done.

My dream car

@JustDriven

4 ай бұрын

Your dream car is pretty awesome!

THE gears that stock in that car was for superspeedway you have a hard time driving it but stick a clutch in it and that Pistol grip much more drivable

@JustDriven

5 ай бұрын

All great points and things we have been giving some serious thoughts to. A manual trans is something we’ve been considering for a while now. Thanks 👍🏻🙏🏻

I love that car so much it brings tears to my eyes thinking about owning one

@JustDriven

2 ай бұрын

They are getting more and more difficult to find and find in good shape.

We didnt have the parts Vega converter in PG .But you have a huge intake its got to be rich

@JustDriven

5 ай бұрын

We will have more info to share in an upcoming video.

can u guys do the nissan skyline r34 plss

@JustDriven

5 ай бұрын

We hope you'll subscribe to the channel so you can check out the 2F2F Skyline and the other Fast and Furious builds.

I hope i could ride one of this

@JustDriven

5 ай бұрын

It's a rocket!

Im trying to use yall data for the assetto corsa version. So 940 lbs of torque at 3500 RPM, HP@rpm?, redline rpm? gear ratio? 10-12psi boost? What rpm is full boost. Lol care to share? Im dying to beat this car down virtually

@JustDriven

5 ай бұрын

We will have a video coming in the near future (once we get fully settled into the new shop space). We will try and answer all your questions there.

I have to ask. If someone brought u a charger how much would it cost to replicate

@JustDriven

5 ай бұрын

It would depend on the Charger. But we could talk about building a Charger if someone wanted.

Thats man has been waiting for 10yrs to see someone get on that dyno that didnt have a blow off panel on thier blower just so theyd ask to see his. Hes been ready for years just to show off that keith black blown nascar engine with the side oiler.

@JustDriven

4 ай бұрын

It was worth the wait! Rick has so much knowledge to share. We were soaking it up!

I entered to win this car for my uncle. He is a very big Mo Par Fan.His dream car, and we love what all you do

@JustDriven

3 ай бұрын

Thank you so much!

Was the supra licence plate year tag a 99 or 93?

@JustDriven

5 ай бұрын

What now?

@Schultzy1992

5 ай бұрын

​@@JustDriven the 3NTQ305 plate year tag was it 93 or 99?

@JustDriven

5 ай бұрын

Oh! It's 99.

Put a good wheel/slick on it so we can see the wheelie!

@JustDriven

5 ай бұрын

It has the same tires it had in the movie! But we may need some more torque to get it vertical.

Sale ?

@JustDriven

2 ай бұрын

It's currently not for sale.

What kind of transmission is in it

@jeremywillis7407

5 ай бұрын

Chrysler Torqueflite 727.

@JustDriven

5 ай бұрын

Thanks Jeremy.

Wow!!! It would be nice to get in touch with Vin Diesel to take it for a spin 🙏🏻😁, beastly car!

@JustDriven

5 ай бұрын

We would need to verify Vin's license and insurance before letting him drive this thing.

Remember when the "rail car" was for sale cheap with no takers?

@JustDriven

5 ай бұрын

That took a special kind of collector.

I'd put a couple of heat sinks in the fuel lines one after the pump by the fuel cell & one just before intake

@JustDriven

5 ай бұрын

We just had the exhaust finished up and were not sure where the piping was being routed. So we waited to finalize the fuel setup in the trunk. It's actually all finished already. So it didn't need much.

God I wish I could have a car like this

@JustDriven

5 ай бұрын

It took us a while to finally pull the trigger on this build. But we are all psyched we did.

It’s crazy that’s still less than the latest demon challenger Still sounds better though

@JustDriven

5 ай бұрын

For now...

Now can it do a wheelie and spin tires? Thats imposible still really nice charger

@JustDriven

5 ай бұрын

Maybe with some movie magic.

@daytongamingyt1767

5 ай бұрын

@@JustDriven frfr

how many family power?

@JustDriven

5 ай бұрын

ONE family.

By the way which car have more horsepower compared to supra ?

@JustDriven

5 ай бұрын

The Supra has more horsepower. BUT the Charger has so much torque... It really would be a fun drag race.

@justinlin6879

5 ай бұрын

I will like to see it too@@JustDriven

940 fr lbs is almost 1300nm!! Amazing.

@JustDriven

4 ай бұрын

Yah, it's a bit insane. We love it!

I would put the fattest tires on the back lol 😂

@JustDriven

5 ай бұрын

We have pretty fat tires back there.

I know the answer it to my question will be because we can, but I’m still gonna ask why😂

@JustDriven

5 ай бұрын

Because why not!?

"So much torque, the chassis twisted coming off the line, Barely kept her on the track"

@JustDriven

5 ай бұрын

And it kept slipping on the dyno messing with its dyno numbers.

@Jigsjigz

5 ай бұрын

You have no idea how bad i want to own a 69-70 charger, so envious@@JustDriven

@JustDriven

5 ай бұрын

We hope to inspire you for when you own one someday!

@Jigsjigz

5 ай бұрын

live in england cost a deposit of a house to run! let alone buy now haha. its still a dream, amazing car buddy. @@JustDriven

@JustDriven

5 ай бұрын

Sounds like you need a winter home here in the states. To vacation here and drive the heck out of your Charger! Maybe unrealistic, but you did mention it was a dream.

like number 883 - does that mean the car is a little sporty? 😂

@JustDriven

5 ай бұрын

940 lbs at 3500 feels UNREAL.