Power adder coming soon 😎! Let’s get to 100k subs. Thank you everyone that is helping us grow this has been awesome 💪🏻.

@tomeickhorst6787

14 күн бұрын

What rear end is Eagle going to have. 11inch or 12inch that’s the 9in style??

@csmooth1262

14 күн бұрын

100k by midnight tonight!

@billmadison2032

14 күн бұрын

You only need 8000 more subscribers

@peterad1529

14 күн бұрын

Power adder or adders 😉

@mikegonzalez4469

14 күн бұрын

Looks like you’re going to beat Swanstrom to 100k 👍Congrats brother.

"Why did you take off my ground?" "Because I didnt need it" LOL

@Ohrank

14 күн бұрын

''Because it was in my way'' ???

@catxx5480

14 күн бұрын

Seemed abit miffed like how'd u like me doing that on u I cud sense sum1 huffin in that place

@SNELLERIZED

14 күн бұрын

"Put it back" LOL

@RIPPERTON

14 күн бұрын

He seems like one of those unsackable kind of employees.

@ArKritz84

14 күн бұрын

​@@RIPPERTONReminds me of Scruffy the janitor in Futurama, except a lot more useful.

I used to be one of those “no way a car can cost that much to build!” guys. After seeing the absolute focus you guys have on quality and attention to even the smallest details, I now understand! Amazing project that I can only dream about!

I really appreciate the effort Troy puts into body work this is basically a top end show car quality build that’s going to run 5’s. This car is worth every cent it costs to buy

@Racerman27410

14 күн бұрын

agreed! The reason the best costs extra?.... It's worth it!!

@CarsCatAliens

14 күн бұрын

Yeah when Jerry's (Monza) car "Bad Attitude"was revealed my jaw hit the ground..Car is stunningly beautiful. From the inside to outside just perfect.One of the most well thought out racecars I have ever seen

@samishiikihaku

14 күн бұрын

It will be a gorgeous car. No WAY in hell I could afford it though. I'll take my 13sec old school mustang unless I win the lottery. lol

@DadBeard-pi2oy

14 күн бұрын

The lost art of craftmanship!! Wealth of knowledge of Danny and Troy is priceless!!

@ascott8548

13 күн бұрын

@@samishiikihaku you can have my 12 second vette for short money....boston area

these guys were already great ..... Cleat putting them on the map where they should be !!! awesome to see them get the recognition they deserve 😊

@CJRaceCars

14 күн бұрын

🙏🏻💪🏻

@johnunruh1086

14 күн бұрын

Well said!!

@ImConstantlyDrunk

14 күн бұрын

True story!

@chadwickalexanderjr1758

14 күн бұрын

If you want a chassis you should haven ordered it before this video, cause prices have just gone up!

@davidwalters7757

14 күн бұрын

You all do know some of the guys CJRC has already built cars for?These guys were already on the map!You have just now heard of them cause you’re a Cletus follower!!They build some of the best and baddest rides out there!

This is the single most interesting fab/build project I've ever watched. The engineering how's and why's have been entertaining and educational.

@babaluto

14 күн бұрын

It's kinda too bad that Cleetus has all but eliminated build content and has become more showy. Still a great channel and person though.

@TracyNorrell

14 күн бұрын

@@babaluto Cleet's channel is focusing on what they're good at, Straight Goof'n. But in that transition that are helping us find new 'build channels' to support. These guys, Steve Morris, the fiberglass body people... It turned out well for us and these other builder/creators. Remember when Cleet tried to help Jeremy from faster proms?

@babaluto

14 күн бұрын

@@TracyNorrell I remember well. It's been a great ride. He brought me back from ambivalence about racing.

HEMI BROTHERS are gonna have one BAD RIDE!!!

@russellridge8623

14 күн бұрын

😂😂😂

@s4ss.m8

13 күн бұрын

HEMI BROTHERS

I just have to say.... i absolutely love how these guys can ask eachother questions about what they are doing and actually take the other guys suggestions instead of just doing their own thing on their portion of the build... this is a top tier work environment.

It's cool how well these guys bounce ideas off each other. Great team

Congratulations on 100k. It's not there at this second but it's coming TODAY.💯💪

@CJRaceCars

14 күн бұрын

Let’s go 💪🏻

@Tater_Poutine

14 күн бұрын

​@CJRaceCars Congratulations on 100k subs OFFICIALLY.

@amagawd1438

14 күн бұрын

@@CJRaceCars Congrats!

Dang, I love watching experts work. Cam Guy makes me feel like I am standing right there learning from professionals. 10/10

Right at 6:57 p.m. I seen it hit 100K subscribers congrats Cameron you deserve it bro. To all the guys at the shop you are awesome🎉🎉🎉

@CJRaceCars

14 күн бұрын

Let’s gooo 💪🏻

Just started watching your channel. Love it! Just wanted to say, i can just tell the years of experience in that shop and the way the old boys are on film. Thats some knowledge and skill that i just pray will be passed on to the next generation. True masters of there craft. Keep it up man, love the work you guys put out 💪

Great to see this quality shop get the recognition they well deserved. Pre clete less than 38,000 subs , tonight 100k .

This channel has grown to become one of my favorite channels. Absolutely beautiful craftsmanship & dedication. Keep up the work! & thank you for the CJRC cup with the shirt :)

@CJRaceCars

13 күн бұрын

Thanks for the support!

Congrats on the 100k subs. Building Cleeters car has certainly paid off. He gets a killer car, you get the recognition you deserve, we get great videos!

How y’all stayed under everyone’s radar is beyond me. This is not just craftsmanship, this is masters at work. Brilliant team, excellent work. I find myself checking for the next update on this build several times a week… sometimes a day. Looking forward to the finished project and what you have in store for the next big build. Cheers boys, keep up the good work.

It's crazy we get to see behind the scenes in detail of a pro chassis shop like CJRC for FREE!

These men are the dream team of building the BEST race cars heavy hitters

I've always had mad respect for Body Fabricators. So much intricate work to make everything fit perfectly.

You guys are absolutely slaying KZread 👍

@CJRaceCars

14 күн бұрын

Let’s go 💪🏻

I knew a huge amount of work went into building one of these cars but i didnt truly understand how meticulous the craftsmanship is. Its a very precise sculpture thats made to go 0-230mph in 5 seconds. Really impressive stuff.

@mattnsac

14 күн бұрын

Too many people see 1 hour car shows where its done and driving with 3 commercial breaks. What shocks me is how fast this is coming together. I own a shop doing motorsport electrical and I couldn't build out harnesses for this car in the amount of time they have built a roller.

Great metal work from a master . Hope the youth gets into this kind a stuff and keeps it going.

I don't know what we're gonna do for skilled tradesmen when these guys retire, love this channel.and watching masters at work

Seeing cj in that seat.. Mad funny how tall ole cleetus is

@heavyhemi2828

11 күн бұрын

cleet is a walking skyscraper

What a blessing for some younger hands to learn from such fabrication experience.

Congratulations on making it to 100k!!! A damn good channel that deserves it.

I only know a little bit about cars but I learn so much about fabricating in general, watching your videos. It's awesome to get to see behind the scenes, watching a legend being built. Thank you for sharing the process with us!!

This is gonna be a show car as well as race car. Millions of people are gonna see this car at all the events cleetus does. It's gonna be top notch everything.

@troy-from-cjrc

14 күн бұрын

Exactly!!! 👍

Long time follower. Glad to see this project for Cleetus growing the channel, I've always felt your shop and crew deserved more recognition. Great build, amazing craftsmanship, hopefully this inspires more future content to keep our interests fed :).

Total respect from the young guys asking and listening to the wisdom of the old guys. So much respect within the team. Well done guys.

The abilities combined with how they work together is awesome. There's spats in every shop but seeing people work together is awesome.

The way the motor plates work, reminds me of how open-wheel racecars use the motor as a stressed member of the chassis, only here you're gaining torsional rigidity to keep the front end aligned and keep the car straight.

CJ Race Cars KZread channel continues to have some of the most valuable content on the internet I love the format and education Thanks for the info!

@CJRaceCars

14 күн бұрын

Thanks for watching 💪🏻

Taylor is a go getter for sure he never stops he does a little bit of everything plus helping everyone y'all have a great team

The willingness to share so much of the wisdom of the guys in your shop about your process is super valuable for young fabricators.

It's fantastic to see your team converse on ideas before making final decisions, true respect between all, they have become camera friendly and so informative, you have a top notch team to be proud of, bring more on your other builds when time allows 😂!!

10:06 the amont of knowledge in this shop is amazing, and then the young ones learn…. This building of race cars will never die, all shops have new guys and old guys.

Wonderful to watch this build from South Africa. Thank you!

Danny, your a rock star!

You and your entire crew is straight murdering this project! The attention to detail is amazing! Keep up the great work and videos!

Here’s to 100K!

@CJRaceCars

14 күн бұрын

Let’s go 💪🏻

Brother, just got home from work. Great timing. Thanks for all you do!!

I have the knowledge equivalent of a squirrel when it comes to fabrication and building. Watching these dudes work and bounce ideas off each other is amazing. A bunch of masters all coming together on 1 art project

Ooooooo 99.2k! Picking out the stances from the thumbnail 🔥

Absolutely wicked guys. Can't wait to see those low 5 passes.

Congratulations to CJRC for 100K subs !. You guys are the Best ! 😊👍

This is awesome . Seeing a car built from scratch . Pros at work . Really like watching metal fab. Looking forward to the next one .

This is going to be a whole new level of bald eagles for Cletus and his guys you guys are crushing it I love to watch professionals do what they do best you can just feel The vibes off of someone in the zone and they're doing what they like to do

Love everyone's attention to detail, it shows everyone's expertise and how much each one of you enjoy and take so much pride in what you do....cheers , glad to be subscribed

Congrats on 100k! Loving this build series

Looking great guys! Thank you for your videos!

Gratz on Hitting 100k sending nothing but love and positive vibes your guys way. Can't wait to see what else you guys build.

Congratulations on 100k!!

Been patiently waiting for this! Love love love the updates from you guys.

It's really coming together, It's amazing how quick your team is on something as complex as this.

Now this is Art! Beautiful work guys!

Thanks so much for sharing your knowledge. The entire program is a notch above excellent!

CONGRATULATIONS!! WELCOME TO THE 100K SUB club.. dont forget to order your plaque.

seeing that engine and trans installed is huge, cant wait for the next episode

Best episode yet from the channel. Not stuck on one thing for 20 minutes

@CJRaceCars

9 күн бұрын

Let’s go

Ah, 100K!! Congrats! Love the work, thanks for the video.

Skilled craftsmen at work , I could watch and learn all day. Many thanks for the update . Great camera work by the way.

Lot of knowledge floating around that shop! Thanks for sharing, quality looks top notch.

These guys are the real deal! Excellent explanation on everything they are doing!! Great attention to detail!! I love it! Keep it up!

That’s a great team folks, with great communication amongst each other! You guys are pretty good at this stuff! 🔥🔥💯💯

Watching you guys work makes so envious. I have a great job and I do like what I do but it just isn’t the same as what I really love to do.

Another great video, CJ RACECARS! Really appreciate you taking us on this journey,!!!

It is amazing seeing the birth of this car and the combined experience of you guys working together !

I'm an electrician, and I take my job very seriously. I know what these guys dreams are like.... Their thoughts are tied together for a final outcome. They live in the very metal that they sculpt. Dreams/nightmares, whatever you want to call it, it's your life. I seriously believe this whole shop is on an autistic spectrum, normal dudes don't think as deeply as these guys. What a piece of art !!! A CREATION...Not just built....thoughtfully created, giving their time and life and dreams into one FREAKING BEAST!!!! I can't wait to see this EAGLE fly!!!

@troy-from-cjrc

14 күн бұрын

My mind is always racing...

Love all you have been posting man keep up the good work and also hope this car get cleet some records and speed he has never fell before ggs guys😊

These videos are mesmerizing the amount of detail and precision your team has is next level. Love it!

Congrats on the 100k ! Keep up the great work really enjoy watch this all come together its gonna be a MONSTER !!!

So excited to see Eagle roll. Great job on this car you guys. Lookin' amazing!

I'm hooked on watching yall work bro! It's crazy to see the amount of patience and perseverance that everyone has! Everything I've seen is as close to perfect as you can get! Awesome work guys

Hell yeah brothers it’s really starting to come together beautiful build so far!

Brilliant content as always! Keep up the good work guys, cant wait for the next installment!👍🏻

100k well deserved. You're all gentlemen of class.

Love seeing the time effort and discussions that go in to each detail of the car. And its awesome seeing the gains in subs each upload! keep up the good work guys!

Just found you guys and I love there’s no curse words and how professional you gentleman are plus I just subscribed. ☝️☝️🙏🙏🙏🙏

@janockosgarage

12 күн бұрын

Good editing. "Gentlemen" is far too kind. 😂

Thanks for explaining the top of the front struts / coil-overs with the front plate. I was the one who asked earlier. That definitely will strengthen up that area! Also you guys do some damn good looking work‼ 😍

It’s crazy to watch masters of their craft all working on the same project and nailing every detail. It’s usually one guy who knows what he’s doing and 3 guys screwing everything up.

So much knowledge in the team! very nice content

Congrats on 100k guys, VERY well deserved

Awesome build adventure! Can't wait to see those shoots fly out for the first time. OhYA!😊

Giving me old school Orange County Chopper show vibes, but just the good stuff. Keep the content rolling boys

This is looking amazing!! Keep up the good work boys!

Coming along nicely guys. Glad Cleetus picked you guys to build his car. You deserve all the subs and more!!!

Congrats on 100k! Well deserved🎉

Soo close to 100k HELL YEA BROTHER1!!! I never get tired of watching this type of content.

You guys are making a masterpiece the why you explain everything is good.

Ya'll are killing it.

Crazy detailed love this build ❤

Beautiful work Cj and the boys 🫡

LET'S GO!!! Can't wait to see the car finished.

Congratulations on reaching 100K subs. You’ve come along way in a short time. We all appreciate your content. The camera work is fantastic and the details you show us is amazing. Keep it up CJRC

Something I've always found interesting is stitch welding. See it a lot in draft cars to make stuff more sturdy. Js it would be a nice final touch.

I don’t know much about fabrication and I’m a little surprised at how analog the process is and how a lot of it is just done freehand. I kinda thought there would be some CAD involved and more precise measurements than “15 3/8 inches”, especially for a car with 5000hp. I thought they would start with the engine measurements and build motor mounts and trans mounts and build the frame to fit those measurements. It’s a fascinating process and these guys are masters of their craft.

The cars you guys build are truly works of art

⁠ Congrats on getting to 100k bro