Field Recording Tips: Record Better Sound Effects and Avoid Common Mistakes

Тәжірибелік нұсқаулар және стиль

In this video, I'll be sharing some field recording tips so can go out and record better sound effects while avoiding common mistakes.
There's a lot to learn when it comes to field recording: What mics to use, when to use them, how to position them, how close/far should you be from the source, how to get clean and quiet recordings, etc.
Over the past few years, I've learned a lot about recording sound effects...some things through trial and error, and others I've learned from professionals in the field.
In this video, I'd like to share tips for recording sound effects so you can avoid mistakes I've made and jump straight to recording better sounds.
Sound Designer's Starter Pack (free): daviddumaisaudio.com/starterpack
My Field Recording Gear (May Contain Affiliate Links):
Zoom F6: www.daviddumaisaudio.com/zoom-f6
Zoom H6: www.daviddumaisaudio.com/zoomh6
Zoom H6 Accessories: www.daviddumaisaudio.com/zoom...
Lom Usi Pros: www.daviddumaisaudio.com/lom-...
Em258: www.daviddumaisaudio.com/em258
Rode NTG5: www.daviddumaisaudio.com/ntg5
Small Rig Handle: www.daviddumaisaudio.com/hand...
1/4" to 3/8" Converter Threaded Screws: www.daviddumaisaudio.com/adap...
Rode XLR Adaptor: www.daviddumaisaudio.com/rode...
00:00 - Intro
01:00 - Field Recording Equipment: What to use and when to use it
04:51 - How to prepare for your field recording session
08:26 - Tips for recording sound effects
12:14 - Labelling your recordings
14:11 - Misc tips
Thanks for watching!
----------------------------------------
👇Join my email list below and receive a free sound design sample pack ($50 value) 👇
mailchi.mp/2a5ac038a023/free-...
----------------------------------------
Subscribe to my KZread Channel
/ @daviddumaisaudio
----------------------------------------
My Courses
www.daviddumaisaudio.com/ecou...
----------------------------------------
My Products
daviddumaisaudio.gumroad.com/
----------------------------------------
Resources
www.daviddumaisaudio.com/reso...
----------------------------------------
About David Dumais Audio
David Dumais Audio is committed to creating professional, creative, and expressive sound design and music for video games. David wants to share what he has learned over the years; everything from creating energetic music to crafting ambient sounds, gun sounds, foley, recording sounds, UI sounds, game sounds and so much more.
The David Dumais Audio KZread Channel contains some of David’s best advice, strategies, concepts, and philosophies which he has effectively used to help hundreds of game developers realize their goals. This channel is designed to help the beginner as well as the professional continually improve their skills and challenge their creative process.

Пікірлер: 42

  • @europeanambience
    @europeanambience10 ай бұрын

    Omnidirectional Mics in XY and ORTF doesn´t make sense. You use cardioid microphones in XY and ORTF Setup. For Omnis just spaced AB

  • @daviddumaisaudio

    @daviddumaisaudio

    9 ай бұрын

    Yes. I was mistaken about the position of omnidirectional microphones. Fortunately, it doesn’t really affect the recording, at least from what I understand and what I have noticed.

  • @europeanambience

    @europeanambience

    9 ай бұрын

    @@daviddumaisaudio Yes it doesn´t really effect the recording because it doesn´t really matter in which direction they are pointing (at least to a certain degree). The only negative thing you could say is that they are not spaced out enough to create a good stereo image. But if the Recording sounds good it doesn´t matter, how it was recorded right?

  • @OzExpeditions

    @OzExpeditions

    7 күн бұрын

    @@europeanambiencewhat would you recommend for spacing?

  • @ChristopherGronlund
    @ChristopherGronlund10 ай бұрын

    A great way to begin a new workweek. Always appreciate all you share, David...and how detailed you get.

  • @baroquer
    @baroquer8 ай бұрын

    Man, you can TALK Are you high on Speed? :D Blink twice if you're kidnapped xD

  • @briankehew579

    @briankehew579

    4 ай бұрын

    Yes, a gentle request to Slow Down. It's hard to follow. Great info though!!

  • @Blazincannon.

    @Blazincannon.

    3 ай бұрын

    @@briankehew579 It was hard to follow but I don’t think he can help that. I slowed the video to 0.75x in settings and it worked great.

  • @jakubsz86
    @jakubsz869 ай бұрын

    Great info for a start. Thank you

  • @Mandisa_intuitively
    @Mandisa_intuitively4 ай бұрын

    Thank uou for this detailed explanation 😊

  • @Liron.Luminol
    @Liron.Luminol7 ай бұрын

    Tnx bro❤

  • @DashGlitch
    @DashGlitch10 ай бұрын

    Great one, thanks

  • @DashGlitch

    @DashGlitch

    10 ай бұрын

    btw I noticed some clicks similar to what I got with resolve with the youtube render preset, but if I just render out with the default the clicks weren't there - I hope that helps if you're even using resolve :)

  • @daviddumaisaudio

    @daviddumaisaudio

    9 ай бұрын

    @@DashGlitch Strange that there are clicks. I do use Resolve, but not the KZread preset. Do you find they show up at a particular place for you or are they random clicks?

  • @DashGlitch

    @DashGlitch

    9 ай бұрын

    @@daviddumaisaudio I'll watch through again and see if I can find the timestamp, it's not often I think once or twice in the video

  • @DashGlitch

    @DashGlitch

    9 ай бұрын

    @@daviddumaisaudio 7:12 the reason I said it is it reminded me of the sound I had a few times when using that preset, anyway I hope you can figure that out, great video btw, that part about testing the recording first is so obvious but so many times I have been caught out.

  • @daviddumaisaudio

    @daviddumaisaudio

    9 ай бұрын

    @@DashGlitch Huh, I went back into my resolve project and it isn’t there so it’s definitely coming from export. Thanks for the heads up. I’ll have to look into it.

  • @floraphonic
    @floraphonic10 ай бұрын

    great video

  • @DAOE_Audio
    @DAOE_Audio10 ай бұрын

    Great video David! I was wondering what stand/holder you are using between your f6 and microphone setup? Looks like a great run and gun setup.

  • @daviddumaisaudio

    @daviddumaisaudio

    9 ай бұрын

    That is a smallrig handle grip: www.daviddumaisaudio.com/handlegrip (affiliate)

  • @DAOE_Audio

    @DAOE_Audio

    9 ай бұрын

    @@daviddumaisaudio thanks!!

  • @douglascarrphotography
    @douglascarrphotographyАй бұрын

    Hi Dave I'm defiantly not an expert as I only learned about field recording 5 days ago and bought my H1 Essential 3 days ago but maybe you should get the Zoom M3 mic as it can film in both Stereo and Mono and you can even change from one to the other in post after you've recorded pretty awesome mic from what I can see and have learned in 5 days about sound and recording

  • @edjefferson9175
    @edjefferson9175Ай бұрын

    If you want to record in stereo and mono at the same time go with mid/side microphone. Then you can decide later. Try positioning your omni mics 180 degrees opposed about the width of your head. Works like our ears. Captures left-right-front-back-up-down. While reviewing a recording I actually turned to see what was behind me. With only 2 mics.

  • @fkesfjsedfdsj
    @fkesfjsedfdsj10 ай бұрын

    Where can I check the projects you have worked on (preferably highly involved, like whole sound design for a game)?

  • @daviddumaisaudio

    @daviddumaisaudio

    9 ай бұрын

    LinkedIn

  • @lookingforsounds
    @lookingforsounds10 ай бұрын

    Good advice David. It's amazing how many recordings I ruined because of my breathing or silly stuff like handling or cable noise. Also be very aware of the clothes you're wearing before you go out. I also screwed up a few recordings because of the rain jacket I had on, or Nylon hiking shorts/pants that made rustling noises whenever I moved. All part of the learning process though.

  • @stephanethomas2186

    @stephanethomas2186

    9 ай бұрын

    😊 One of the first thing realised when I started recording shits: damned I have to hold my breath, I hope I'll never need to record something too long!

  • @stephanethomas2186

    @stephanethomas2186

    9 ай бұрын

    It's where a good directionnal mic helps, I suppose...

  • @stephanethomas2186
    @stephanethomas21869 ай бұрын

    Finding the right input level can be tricky too, so if it's possible, yes, do multiple takes, I'll add at difcerent levels.

  • @JonathanWachoru
    @JonathanWachoru10 ай бұрын

    Hello David! Great ideas shared there but I think you do a big mistake mounting omnidirectionnal mics in XY... because they are omnidirectional, only the space between them will create a stereo image (the delay between the 2 mic) so only AB makes sense for this kind of pattern. 2 Omni mics in XY means you will record 2 time exactly the same thing. Just an advice, if you want to do XY, use cardio mic! ;)

  • @daviddumaisaudio

    @daviddumaisaudio

    9 ай бұрын

    Yes, you are right. I think spacing them further apart would be more beneficial than where the mics are pointing. I’ll be experimenting with that more. Thanks for the tip!

  • @JazzInATinCan

    @JazzInATinCan

    9 ай бұрын

    @@daviddumaisaudio I've been using omni mics with space between them for close up single source and it bombs. But XY makes little sense

  • @h.s.7797

    @h.s.7797

    4 ай бұрын

    In fact, your omnis are not that omnidirectional as you had wished. That's why your XY experiments resulted in something stereo.

  • @stephanethomas2186
    @stephanethomas21869 ай бұрын

    Mixing L and R channel often produce awful results. I find that selecting one of the channel is better. Of course this iq something to taake into account if you only has sterro micq but wants a mono track for final result. Sadly, many recorde mix both channels but only has the internal pair of mics. The distortion is obvious if you record a voice in a room with a good amount of reverb and the mics are at one meter (even less) of the source.

  • @pywidem5823
    @pywidem582310 ай бұрын

    Why do you mount omnidirectional mics with an angle? That should not do something significantly different to mounting them straight

  • @DashGlitch

    @DashGlitch

    10 ай бұрын

    If the mics are pointing in the same direction, they are likely to pick up a very similar source and thus negate the need for a stereo pair ;)

  • @pywidem5823

    @pywidem5823

    10 ай бұрын

    @@DashGlitch well, no, cause they‘re omnidirectional. With omnidirectional mics the angle doesn’t matter, cause they’re omnidirectional. They don’t pick up what’s in front of them but rather everything all around

  • @DashGlitch

    @DashGlitch

    10 ай бұрын

    @@pywidem5823 Regardless of their polar patern, the incoming phase will be the same if they are in the same direction and thus the recording will be very similar. If they are at an angle, their phase will be offset by 90 and closer to a natural stereo image.

  • @europeanambience

    @europeanambience

    10 ай бұрын

    @@pywidem5823 agree Omnis in XY doesn´t make sense. you use cardioid microphones for XY. Maybe he should study more about polar patterns

  • @daviddumaisaudio

    @daviddumaisaudio

    9 ай бұрын

    Yes, you’re right. I think spacing them further apart would be more beneficial than where the mics are pointing.

  • @svvancouver3307
    @svvancouver33072 ай бұрын

    Are you speaking so hyper fast so you have less to edit?

  • @pgfrank2351
    @pgfrank235125 күн бұрын

    slow down please. This seems intended for people getting into field recording like myself and your losing me real quick with the fast talk and technical lingo many of us probably dont have a full grasp of yet specially if we are here for a beginners type video.

Келесі