The reed switch is a switch that is turned on/off from a magnet. It is turning on and off the DC circuit every time a magnet passes by causing it to spin faster and faster until the battery is drained from the electromagnetic field.

Nifty trick with the reed switch.

Hey, I have a question, will the emf produce by the wire have the same force to the centripetal force action on the fidget spinner?

good guide about Electromagnet work

This really work fine, thanks

Helped for my project work in science exhibition thanks

Hi I wanna do this as a project but how/with what did u attached all the wires together and do I need a reed switch

how did you connect the reed switch to the wooden stick and the circuit and what is the use of the reed switch in this circuit

How did you set up the reed switch ?? Please answer this question, i badly need it for my hw

Came from electrobooms liked videos playlist

@Serdrix

5 жыл бұрын

ahaha, I was just watching him and was spinning a fidget spinner when I thought of looking this up.

What brand of reed switch did you use. Is the Reed switch normally on or off? How sensitive is it. I’m trying to replicate this.

@qwertyuiopasdf160

3 жыл бұрын

There is no reed switch in this this really works

@shahzadadil774

3 жыл бұрын

I think both type of reed switch will work

May I change the type of magnet? by using a decorative magnet for the fridge?

Bedini who invented this motor was a legend

Good afternoon, I have a question. How can I get the torque (force) for the spinner to rotate?

How critical is the placement of the coil & reed in relation to each other? Can they be on opposite sides?

this is amazing !

I'm sorry man, I just keep on asking questions. One more thing, what do you classify this project as: a DC Motor, Generator, or one of the others??

@ElectricExperimentsRobert33

5 жыл бұрын

Homopolar type more and less..

Thank you so much!!! I was able to make my project because of this video!

@gauravshahi2308

2 жыл бұрын

Hey can u tell me for what degree course u made this project ...?

Can you tell me that is reed switch is important tell fast because on Thursday is my fair ...and it has 100 marks

Wow! Nice video.

Hey Don't worry I fixed it thanks for all the help

Will add to my make it list. Until then, a curious mind would like to know how long the battery will last? I made a homopolar motor and the battery lasts about 6 minutes of continuous spin. Thanks.

@hornteop4562

2 жыл бұрын

Can you plz explain how you make this! Because i need this for my science project.

Does it posible to use the same movement of the artificial motor to recharge the battery? or any other battery rechargable to create a supossed "infinite energy"?

@ElectricExperimentsRobert33

5 жыл бұрын

What you say in this experiment is not possible..

Well done 👍

Should the copper wire coil be enameled? Should it be 180 turns? Should it have a on/off button? Plz answer fast my science fair is on this Sunday it has 50 marks!

@ElectricExperimentsRobert33

5 жыл бұрын

The wire is enamelled, with 180 turns. The power button must be there.

@17ivbshahteerth25

5 ай бұрын

What is the thing which to attached to spinner that brown stick name pls reply fast at Wednesday my fair is their 100 Mark's

Interesting that the buffering symbol on this video is a fidget spinner, hadn't seen this youtube easter egg yet.

@annasantoro6138

5 жыл бұрын

Ciao is

Vo spinner ke bahr ke magnet ke pole konsa hai north ki south

is it necessary to use reed switch

Sir can you send me file of this model i.e on which principle it works ,uses,working etc. about this model

How to keep the reed switch

THE COIL SO BE TALLER, LET BLOCKING BY THE MAGNET!

also does the magnets have to have the hole in the middle we bought same diameter but in whole

@FPChris

3 жыл бұрын

No that is a mounting hole. People screw them into wood etc to hang tools etc

Really cool

I want full video,but I like it.

woah maybe i'll make this one day

Is it ok if I modify your model? Thanks!

How do you do the wire please answer fast my thing is firday

Ok good will it continue to spin even if the battery run out of power?

how to connect reed switch plzz ans quickly

Hey Bro, I so sad, Can you please tell me what the measurements of the dots on the base are? From the edge till the dot measurements? Not working :(

@ElectricExperimentsRobert33

5 жыл бұрын

The precise points change according to the construction of the whole parts construction system. I can not help you away, I'm sorry.

Great job! I love science .

@ng1136

5 жыл бұрын

Tony D tubkblpkjgnvvbcjgij🏗🖼🚂🚂🚂🚄

@abdurrashid5665

4 жыл бұрын

ববোকিকডককোকডককিকিহকিবিবডবববোবোকিবডজজিজববটবেনববিবোবকবাববব িববিবিবিবিবিাববিবোিববিবি্িবোববিবিবিবিিবিববডবিবিচডবোবিবোবিনববিবব্রকজডহিববোহডড়িকসোকহিডহকককডজজবোসোকববাবনহোবাববিবডবব্রবডটববোবচডবোবোববোনন

È bellissimo!! :D

Beautiful :D

Buddy is using the reed switch important??

As always! Exellent!!! Thank you! (tasosne)

@ElectricExperimentsRobert33

6 жыл бұрын

Έχετε ένα νέο κανάλι yt

@anastasiosnezis

6 жыл бұрын

No, only the "tasosne". ΑΝΑΣΤΑΣΙΟΣ ΝΕΖΗΣ is my name and my account on google.

@ng1136

5 жыл бұрын

ΑΝΑΣΤΑΣΙΟΣ ΝΕΖΗΣ ykgkbvhihchk🏭⛩️🚌🚒

We can use another thing at te place of reed switch

what can be the significance of this? I need ideas for my project.

what if I am use a 9 volt battery, can you use it?

I just want to ask what were those sticks on which you pasted the spinner and the coiled wire?

@ajaybhatnagar6682

4 жыл бұрын

Plz tell as i my daughter has to make this for her science project.

hi we have tried many times to make this work we bought everything on here can you help describe a little more of what we may be doing wrong my son really wants to do this for a science project thanks

@mr.klunee4103

4 жыл бұрын

9 months later so I guess it's too late but you/he should do more research on the principles of electromagnetic induction - gaining an understanding of what's actually happening (as far as the physics involved) can help you determine what might not be happening and how you could fix it.

Why you dont show after attaching copper wire . I want to make the project thats why i am asking any one can tell me.

@trishbergueles9806

4 жыл бұрын

Plssss ?? I need to know tooo

This actually works I did it and turned out amazing 🤩

Amazing video!! what is the purposal of reed switch?

@ElectricExperimentsRobert33

5 жыл бұрын

The reed switch is an electrical switch operated by an magnetic field. It consists of a pair of ferromagnetic flexible metal reeds contacts in a hermetically sealed glass envelope. The contacts are usually open, closing when a magnetic field is present, or they may be normally closed and open when a magnetic field is applied. The switch may be actuated by an electromagnetic coil, making a reed relay or by bringing a permanent magnet near the switch. When the magnetic field is removed, the reeds in the reed switch return to their original position.

Will it have the same effect if you use a magnetic ring instead of coil as magnetic field produced by both will be same

@cyberben3d

2 жыл бұрын

No because you can't turn a permanent magnet on and off which is essential to the function of the motor. That's what the reed switch does to the coil.

@technicaladviser8356

Ай бұрын

If you like to fix the coil on an iron ring plate then it will work, same as a magnetic core.

What is the use of reed switch?

Instead of reed switch can we use anything else??????

Hi i want to ask something. Im recreating this one, but i only find 0,6 copper wire, can i use this

@ElectricExperimentsRobert33

5 жыл бұрын

Yes, it's OK, but not 100%

how much RPM does it makes??

Please explain how to do this in voice over

Do we have to care about the polarities of the magnet??

@jderr557

5 жыл бұрын

All magnets must have the same pole facing outward.

Will it work if i take small size magnets

if they adapt this system to dam turbines, small amount of electricity enough to create electromagnetic field to turn the turbines it may double the effectiveness or not?

@ElectricExperimentsRobert33

5 жыл бұрын

I do not know this, I can not give you an answer..

@redsusoverparadise2700

5 жыл бұрын

Read laws of thermodynamics first

@sam9216

4 жыл бұрын

Serkanbah ...it’s already in use, this is basically the same principal as any induction motor.

Is it necessary to use Reed switch?? Or if it can be replaced by something other????

@ElectricExperimentsRobert33

4 жыл бұрын

Yes, you need to use the reed switch only

So, make a flywheel that has more mass and is much larger. Across from the coil thats pushing the flywheel put other coils that generate electricity. Run that current into another battery or batteries. It works.

Second stick jo paste ki hai us pe kya lagaya hai

whats the reed switch for

I am not able to find the specific magnets will any other magnet work pls reply fast!!!

@ElectricExperimentsRobert33

5 жыл бұрын

www.ebay.it/sch/i.html?_sacat=0&_nkw=super+magnete&_sop=7

What's the name of this experiment

Have you connected wire with the reed switch?Please answer me fast.I have an exhibition tomorrow.

@revolution5547

5 жыл бұрын

In series with coil

@martahelenamendes1506

5 жыл бұрын

Ko

IMAGINE MANY SPINNER TURNING AS A MOTOR AND GENERATOR TOGETHER! MAYBE SOMETHING GOOD!

How do you set it up? it was cut '_'

Hi is Reed switch normally open or close?

@Mez352

5 жыл бұрын

closed

Will 30 guage wire. Work

Is there an induction?

Think , if magnets would have only one pole , free energy

What if I increase the voltage ? Does it effect the speed of spinner ?

@ElectricExperimentsRobert33

5 жыл бұрын

Yes..

What is a reed switch?

@cherupallysaiteja7548

4 жыл бұрын

Reed switch is magnetic energy based When magnet comes near switch on When magnet moves far then switch off

What is the explanation?

“That switch was switched” 🤣 (Turn on when clicks off)

What was the total cost

What reed switch does in this awesome project or what is the function of this reed switch in this NICE video

@ElectricExperimentsRobert33

6 жыл бұрын

The switch interrupts and connects the current at the right time.

@gilbertaldape6875

6 жыл бұрын

The Reed switch is activated (turned on) every time is in the proximity of a magnetic field, allowing to synchronize the passage of current at that moment. As the magnetic field moves away, the switch deactivates (turns off) until another magnetic field appears in its proximity.The difficult part is to find the optimal position of the Reed switch, relative to the spinning magnets. Usually that optimum spot makes 90 degrees among the rotation axis, the magnet and the switch.Watch "Fidget Spinner Brushless Motor" Parts 1 and 2.

@jderr557

5 жыл бұрын

Inside an NO (Normally Off) reed switch, two wires are very close to each other but not touching. In the presence of a magnetic field, the wires touch each other and the circuit is completed. In this way, as the rotating magnets get close to the reed switch, the wires inside the switch make contact, current flows through the copper coil creating a magnetic field which, in turn, gives a push or pull to the magnets on the spinner. The very small reed switch is enclosed in a tiny glass case, and it has a wire coming out of each end of the switch. Be very careful when bending or handling the wires on the reed switch because it's very easy to break the glass case. Usually, the technique is to use long nose or needle nose pliers to hold the wire where it comes out of the reed switch, and then bend the end of the wire however you might need to. If you hold the reed switch while bending the wire, you'll break the glass case. You want current flowing through the copper coil only at the right time, as each magnet approaches the coil, and only for an instant. The reed switch is just a simple on-off device for completing a circuit only in a magnetic field. As soon as the magnets on the spinner go past the reed switch, the switch opens and current stops flowing.

Sir if we take less than 180 turns it will not work???because mine is not working I took about 73 turns....and please explain how to join reed switch to wire and switch

@ElectricExperimentsRobert33

5 жыл бұрын

73 turns are not enough, it takes at least twice as many turns. Only with the comments I can not explain the switch in sync with the coil.

wow amazing

Awesome...Is this a simple on/off switch or is there more to it like a diode?

@ElectricExperimentsRobert33

6 жыл бұрын

No, it is a simple switch, no need for diodes.

What about max rpm??

Nice job. :-)

@ElectricExperimentsRobert33

6 жыл бұрын

Hi :)

@Dileep-nd5pv

6 жыл бұрын

electronicsNmore hereby request has the ability is an excellent work with

Is it ok to use ferrite magnet instead of neodymium?

@ElectricExperimentsRobert33

3 жыл бұрын

It has less movement power, but it works anyway

Sir can u provide me a circuit diagram of it

Can u tell that on which law it is based as I have to make hai project report on this can anyone help me that how I can make hai project report

Which way up does the reed switch go please?

@ElectricExperimentsRobert33

5 жыл бұрын

It has neither right nor left, inverting the polarity of the battery reverses the rotation.

HOW DID U SET UP THAT REED SWITCHH??? PLEASEEE I NEED THIS FOR MY PROJECTT!! 😭😭😭

@VishalSoniIndia

3 жыл бұрын

Buy it online

Flyiing no fuel thanks for idea😂😂

What are the materials?

Switch ke paas Jo lag kiya laga he hai woh kya hai

Have you tried to put a dynamo on the spinner and see if it can power itself?

@harrisjohann

5 жыл бұрын

I think if you could amplify the dynamo output and power the coils, it might work.. but heat might be a problem

@chiranthanmr

5 жыл бұрын

As far as I know, dynamo draws energy from the kinetic energy of the spinning object. It would slow down the spinner and finally stop it. This is because of the wastage of energy which goes out of your system because of wind and heat. So, the more closed your system is, longer the spinner runs. At an absolute 0 energy wastage, your spinner will spin forever.

What is reed switch? ??????

Nice :)

What does this reed switch do ? Do we need check polarity of magnets ?

@ElectricExperimentsRobert33

5 жыл бұрын

The magnets can not be inverted, or all in positive, or all in negative.

@abhaygwaliorkar7325

5 жыл бұрын

Electric Experiments Roobert33 I have got .5 in.12.7mm magnets without mark. Wondering how can I find positive negative in such small size . Also does 180 coil of 0.4mm is necessary. Mine is working but only for fraction of seconds .. not sure what else to add to keep it running like yours .thanks

@ElectricExperimentsRobert33

5 жыл бұрын

@@abhaygwaliorkar7325 If yours does not work can be various problems. Unfortunately only with the comments I can not help you, I'm sorry.

Sir, What if there's only a battery and an inductor? Will the spinner still spin??

@ElectricExperimentsRobert33

6 жыл бұрын

The spinner will always spin until the battery runs out.

@johnsonman6261

5 жыл бұрын

I think it'll just stay in one spot because the inductor is never off

This was going to be a project for my science fair. I really liked it when I first saw it. I researched about it and tried to learn the fundamentals. I even went to the shop and ordered everything brand new! I was really disappointed to find out this thing doesn't work! This experiment doesn't work.

@FPChris

3 жыл бұрын

Make sure all magnets are pointed the same direction. Like N out

@ZamanChronicles

3 жыл бұрын

@@FPChris bro I tried everything. Hopeless.

@DongNguyen-xx3gg

3 жыл бұрын

when i did my experiment, it hapened the same to me Because i did not scrap the metal (you know some wire have the insulate layer on it right so you MUST scrap it out otherwise it would not work

@shahzadadil774

3 жыл бұрын

Thia should work may be you are doing something wrong.. Specially check the continuity of wire and voltage and check the reed switch and its funtion.

@salwaputri7719

2 жыл бұрын

@@shahzadadil774 How to know if it still works or not?