🔧 Did this repair tutorial help you fix your stuff? If so, consider showing your support for our channel! 💪 Check out the video description for additional resources and ways to contribute. Your generosity helps us continue creating helpful DIY repair guides. Thanks for being part of our community! 🛠💙

Dziekuje🎉

@regularguyrepairguy

4 ай бұрын

You are welcome!

@piotreklatrottola8465

4 ай бұрын

@@regularguyrepairguy 👍😉

hi, its the same way for the ““Fiat 500L 1.4““ Thank you very much✌😎

@regularguyrepairguy

Жыл бұрын

You are welcome!

Bravo!

@regularguyrepairguy

Жыл бұрын

Thank you!

@molnarlaci3684

Ай бұрын

Fiat Bravo 😄

Can you do a video showing the water drainage system and cleaning it? Thanks

@regularguyrepairguy

Жыл бұрын

Hi! Maybe when it is warmer outside :). Thanks for the comment!

1.4 Star Jet!!!

@regularguyrepairguy

3 ай бұрын

Thanks for the comment 💪

My fist tipo 2015 model is not accelerating and the check engineering light is blinking but it's starting but accelerating throttle not working. What could be the problem

@regularguyrepairguy

9 ай бұрын

Hard to tell without hooking it up to an OBD diagnostics. I hope that you solved problem meanwhile.

Filter wasnt dirty, it could make another tousends kms

@regularguyrepairguy

2 ай бұрын

Sure, but it was due according to the recommended service interval. Thanks for your comment!

@jakubswist5839

2 ай бұрын

@@regularguyrepairguy i have changed that after 80k km, folter was still clean and i think it could left there for another 80k km. But new aftermarket filter is very cheap so i changed it anyway.

@regularguyrepairguy

2 ай бұрын

It really depends if you drive in dusty conditions etc. So yes, it could be relatively clean also after 80k km as you have experienced 👍. I also bought a filter before checking the cleanliness of it, so it made sense just to change it ☺️. As you said, it is not very expensive anyway.

zapomniałeś dodać kolego, że tak naprawdę to z dolnych śrub da sie odkręcić z trudem tylko lewa, środkowa krytycznie a prawa wcale bo blokują ręce rury powyżej!!! No chyba, że masz specjalne klucze do rudno dostępnych miejsc, wałek giętki etc

@regularguyrepairguy

Ай бұрын

Not true in my case, no flexible shaft was used. But it was surely not easy and took some time to unscrew it blindly. Depends also on the toolset you are using. Thanks for your comment!