Few people have seen this method of woodworking!
Good afternoon friends!!!
My name is Alexander, on my channel you will see many interesting solutions for creating a tool with your own hands at home!
Subscribe to the channel, it will be interesting!
INSTAGRAM / master___sh
Пікірлер: 172
Hello friends!👋If you liked the video, support it with a like and a subscription! Thanks!👍
Классный станочек!!!? Можно быстро изготавливать хорошие вещи из дерева!!!! Мастеру жирный лайк!!!
@MA-SH
Ай бұрын
Огромное спасибо Анатолий 👍
Thank you, great video. It never occurred to me to do that with a handheld saw, that makes it very portable, witch I require sometimes. Again thanks for all the great videos you produce.
@MA-SH
Ай бұрын
Hello 👋 Thank you so much friend 😊
Очередное качественное видео!!! Молодец!!! ЖИРНЫЙ ЛАЙК!!!😊
@MA-SH
Ай бұрын
Приветствую 👋Огромное спасибо Шеф 🤝🫡
Buy a lathe!
@MA-SH
Ай бұрын
This is not an online store, but a channel about homemade crafts with your own hands🤲
@santiagotutor2008
Ай бұрын
A bought lathe wouldn't have gotten him this many views or the pleasure of making one.
You should have your blade 1/8" only over your board thickness, I have seen lots of serious injuries and lost fingers.
@MA-SH
3 күн бұрын
Ok, thanks bro 👍
Interesting idea but good example of dangerous work without the use of protective sticks.
@MA-SH
Ай бұрын
Thank you bro 👍
Awesome idea.
@MA-SH
Ай бұрын
Thank you bro 👍
PUT THE DAMN GUARD ON THAT SAW BLADE!!! YOU'RE MAKING MY FINGERS TWITCH!
@MA-SH
Ай бұрын
Ok thanks
@bmallory
Ай бұрын
also the table saw doesn't have an height adjustment for the blade ?
@MA-SH
Ай бұрын
@@bmallory there is
@angiemanges7945
Ай бұрын
I see SO many people do this. Is it really worth the risk of cutting a finger or hand off?!
@MA-SH
Ай бұрын
@@angiemanges7945 You shouldn't even get up from the couch in case you twist your leg, it's dangerous😱
There is a reason you have not seen someone do this before.
@MA-SH
Ай бұрын
🫡
Bendiciones, brillante idea, te felicito colega
@MA-SH
23 күн бұрын
Thank you my friend 👍
Espetacular, Belo trabalho!👏👏👏
@MA-SH
Ай бұрын
Obrigado amigo 🤝
Excellent, super!! ❤❤❤❤
@MA-SH
Ай бұрын
Thank you 👋
Круто.Респект мастеру
@MA-SH
Ай бұрын
Благодарю Николай 🤝
MM77 Approved 👍🏼👍🏼
@MA-SH
Ай бұрын
Thank you bro 👍
This is a great idea, much faster than a conventional lathe, and also enabling a consistent size and taper from one leg to the next. One could always make them fancier by then using traditional turning tools.
@MA-SH
Ай бұрын
That's right, friend! Thank you very much 👍
Buena idea y bien hecho. Te felicito 👏👏😉
@MA-SH
Ай бұрын
Hola, muchas gracias 🤝🫡
Fantastic very good BRASIL
@MA-SH
Ай бұрын
Thank you my friend 👍
1. Use a push-stick 2. You push the wood on the wrong side
@MA-SH
Ай бұрын
OK thanks
That's some sketchy freestyle table-sawing. I cant watch anymore. You cannot run a 8 inch wide board that 4 inches long in between the fence and the saw blade.
@MA-SH
Ай бұрын
Thanks 🙌
Looks like a cool way to make baseball bats.
@MA-SH
Ай бұрын
Thank you 😁
Muito bom, bem criativo!!!👏😀👋
@MA-SH
Ай бұрын
Obrigado amigo 👍😊
Здравствуйте Александр!🤝воистину неисчерпаемы ваши идеи,лайк 👍!хороший станок.я пока остановил работы с деревом,металлом,начался огородный сезон.теперь только необходимый ремонт.бензопилу разобрал сальники поменять и руки не доходят собрать теперь😅.правда занялся,сконструировал и сделал самозасасываюший насос,у меня в огороде старая скважина,узкая,обратный клапан не проходит,вот сделал из огнетушителя и циркуляционного насоса свою конструкцию.
@MA-SH
Ай бұрын
Здравствуйте Владимир 🤝Огромное спасибо! В своём доме всегда дел не мерено 😁 Вчера тестю тоже купили бензопилу новую , старую уже не отремонтировать!
@user-on9nf9ty5n
Ай бұрын
Както сложно но неплохо
@vladim473
Ай бұрын
@@MA-SH хороший подарок тестю!👍
@vladim473
Ай бұрын
@@MA-SH я подумывал о новой,но нет,решил поремонтировать,ради опыта и умозрительного интереса
@MA-SH
Ай бұрын
Да не) он сам купил, я помог с выбором 😁
Привет от Доктора Дью))))
@MA-SH
Ай бұрын
Он тебя уже вылечил, рано рано
Muy bueno el video como siempre!! Eres un genio!!
@MA-SH
Ай бұрын
Hola, muchas gracias 🤝
@rubenbarria1557
Ай бұрын
Nunca desentonan tus videos siempre tenes algo interesante para ver!
@MA-SH
Ай бұрын
🤝🫡
genius
@MA-SH
24 минут бұрын
Thank you
Terimakasih sudah berbagi,
@MA-SH
Ай бұрын
Halo sahabat, saling 🫡
If you have a router you could adapt it to make it a router-lathe. A genuine suggestion!
@MA-SH
Ай бұрын
Ok, thank you 👍
Good job friend beautifully done
@MA-SH
Ай бұрын
Hi 👋 Thank you my friend 🫡
blade is way too high for the cuts.
@MA-SH
Ай бұрын
Ok, thanks
👏👏👍класс!
@MA-SH
Ай бұрын
Благодарю 🤝
THAT IS AN EXCELLENT TOOL YOU MAKE IT LOOK SO EASY
@MA-SH
Ай бұрын
Thank you my friend 👍
@cgmejia
Ай бұрын
yes.. it's called a lathe!
@user-gc7pl1ic4w
Ай бұрын
@@cgmejia well not like a lathe I know this is different
@MA-SH
Ай бұрын
😊👍
@MA-SH
Ай бұрын
🫣
oh , super , wieder ein wunderschönes gerät , ganz liebe grüße aus deutschlandet dir waldemar , nu geh ich auch erstmal in die werkstatt , basteln
@MA-SH
Ай бұрын
Danke, es ist immer eine gute Idee, ein Lieblingshobby zu machen😊
Отличное приспособление. Жаль, что автор не видел никогда бейсбольной биты
@MA-SH
Ай бұрын
Спасибо, почему вы так подумали)) я когда делал эту ногу подумал что можно сделать и биту таким образом
Where is the guard for the saw ???
@MA-SH
Ай бұрын
🤷
Metode yang luar biasa
@MA-SH
Ай бұрын
Good method 👍
Bravo job 👍
@MA-SH
Ай бұрын
Thank you 🤝
You shouldn't be pushing the wood through the table saw like that. It's too dangerous. If you think your hands are far enough away to be safe you're wrong.
@MA-SH
5 күн бұрын
Ok, thank you bro 🤝
There is nothing "new" in this video except for soem dude using a table saw incorrectly.
@MA-SH
Ай бұрын
Ok thanks
Saw blade to high!
@MA-SH
Ай бұрын
A good disk
superbe 😉
@MA-SH
Ай бұрын
Merci 👍
Awesome:)))
@MA-SH
Ай бұрын
Thank you 🫡
Uralte Idee..gab es hier schon oft.
@MA-SH
Ай бұрын
Wenn Sie es gesehen haben, bedeutet das nicht, dass jeder es gesehen hat!
Here we go again, ‘few people etc’ maybe they are just not interested
@MA-SH
Ай бұрын
👍
А какова поверхность после такой обработки? Подозреваю, что сильно рваная, даже шлифовка не полностью скрывает дефекты. Мне кажется, лучше было бы использовать вместо циркулярки фрезер с пазовой фрезой, и подводить фрезу не сверху торцом, а боком, к заготовке
@MA-SH
Ай бұрын
Сразу грубо, требует шлифовки! Можно фрезером
Very unsafe person. No guard on blade, use a push rod instead of fingers, hand. Not to bright. Yes blade is way to high
@MA-SH
Ай бұрын
the moment of the saw was accelerated several times, what you think is dangerous was very slow and safe, but I will not get tired of writing this to everyone who will point it out to me
Хороший вариант.
@MA-SH
Ай бұрын
Благодарю 👍
Обычные токарные станки, на сегодня уже безбожно устарели.
@MA-SH
Ай бұрын
Тут многие пишут, как вижу в кадре токарный станок сразу выключаю видео, вы пишите это😂
Здравствуйте. Смотрю в последних самоделках используйте в основном ДВП, клееное дерево меньше.
@MA-SH
Ай бұрын
Здравствуйте, это МДФ ! Фанера очень дорогая, этот материал подлога от паллет с ламинатом , покупаю за копейки в строительном магазине!
@nickname4122
Ай бұрын
@@MA-SH Да фанера сейчас стоит космически.
Blade too high!
@MA-SH
Ай бұрын
I did it without preparation the first time! That's why the blade is where it needs to be 😉
Wat ben jij toch blij zeker dat jij een van bent😂
@MA-SH
Ай бұрын
🫣
👍👍👍
@MA-SH
Ай бұрын
Огромное спасибо 😊
Нога для пирата, надо было её сделать полую чтобы ром туда заливать!
@MA-SH
Ай бұрын
Хорошая идея 🍾
Now a lot of people saw it.
@MA-SH
Ай бұрын
That's for sure)
Здоров напишите название циркулярки!
@MA-SH
Ай бұрын
Здравствуйте, спасибо!АККУМУЛЯТОРНАЯ РУЧНАЯ ДИСКОВАЯ ПИЛА METABO KS 18 LTX 57
Ustacım şu tutkalı doğru dürüst yay burada bizi de komaya sokma
@MA-SH
Ай бұрын
🫣
Вообще то весь ЮТУБ забит этим методом а вот фиксация кнопки при помощи зажима прищепки оригинально ну по крайней мере для меня
@MA-SH
Ай бұрын
Ну вот видите , хоть что-то для вас прошло с пользой 👍
@viktormakarenko2448
Ай бұрын
@@MA-SH 🛠🛠🛠⚡
What could possabley go wrong. Buy a laith
@MA-SH
Ай бұрын
👍
Are there drawings available for this project?
@MA-SH
Ай бұрын
Hello, all my homemade crafts are improvisation, and all sizes need to be adjusted to the saw that you have
You are incredibly unsafe dude.
@MA-SH
Ай бұрын
🫣
hallo , alexander
@MA-SH
Ай бұрын
Hallo, Waldemar👋
Sen bunlari nerden ogrendin?
@MA-SH
Ай бұрын
KZread
I think I'd rather use a lathe.
@MA-SH
Ай бұрын
Thank you
And...what is it??
@MA-SH
Ай бұрын
You don't understand
Why oh why would you waste so much time on that ?
@MA-SH
Ай бұрын
And what do you spend your time on? To view these videos and your comments?
@woodrowsmith3400
20 күн бұрын
There is either time, or money. Each has different values to every one of us. Those with money would have a lathe. Those with time would build a clever jig like this one. Personally, I find that building jigs is at the high end of creativity, and I have a wall full of them. Some I use often. Some I look at and wonder just what in the hell I tried to accomplish. 😂
@MA-SH
19 күн бұрын
@@woodrowsmith3400 😁Thank you bro
😊
@MA-SH
Ай бұрын
🫡
Why cry? For part-time enthusiasts like me, any cost saver is what I tend to make. Can't see the need for expensive tools to be white elephants to be used on a bi monthly basis. Rather applaud for simple designs to make. Unless you want to sponsor a cordless lathe. Small shop with cordless tools. Here in South Africa tools are expensive. 1 USD to R20 on any given day. Import costs, mark-up etc. As an end user, I definitely cut costs. Regards.
@MA-SH
Ай бұрын
Thanks buddy
То было "в любой непонятной ситуации необходимо приварить подшипник" Теперь, в любой непонятной ситуации необходимо приклеить подшипник " Как вы достали сраные изобретатели
@MA-SH
Ай бұрын
Кому ты нужен доставать тебя!
@vanosuhov2934
Ай бұрын
@@MA-SH, ой ой, какие мы обидчивые...
@MA-SH
Ай бұрын
@@vanosuhov2934 кто тебе сказал что я обиделся? На обиженных воду возят, так иди вози👍
@vanosuhov2934
Ай бұрын
@@MA-SH , не забыл ещё ... Ну так там начало есть, могу прислать парочку к вам !!! Жду видео где подшипник привариваешь, а пока с приклеиванием видео отправляется к доктору... Так что терпение мой заокеанский злейший друг, всё будет. Ложись спать утро вечера... дальше сам знаешь! Полулях Саша, это ты что ли, сбежал?! Ай молодец! Доктор будет рад!
@MA-SH
Ай бұрын
@@vanosuhov2934 Доктор скорее тебе нужен 🤭
I regret ever clicking on this video. What a waste of my time. This is so janky
@MA-SH
Ай бұрын
Thank you bro 😎
фантастический накал идиотии
@MA-SH
Ай бұрын
😱
👍👍👍
@MA-SH
Ай бұрын
Благодарю 👍