Feed Pellet Machine DIY Pellet Machine - Presa pentru Peleti

Тәжірибелік нұсқаулар және стиль

Feed Pellet Machine - building and test.
Presa pentru peleti - test presa peleti.

Пікірлер: 231

  • @DorelBorlea
    @DorelBorlea Жыл бұрын

    See what changes I made to the pellet machine. I used a reduction group to increase the power of the engine. Now the machine for making pellets is much more efficient. kzread.info/dash/bejne/q46GrtBmmtjUdMY.html

  • @langlemedical1
    @langlemedical1 Жыл бұрын

    Excelente maquina , me encantaria hacer una.Gracias por compartir .

  • @skakpedersen
    @skakpedersen Жыл бұрын

    Beautiful build. The cover on the outlet is clever. Thanks for sharing 👍

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Thank you!

  • @tdayuk
    @tdayuk Жыл бұрын

    Perfect, really good design :) Bravo

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Thank you!

  • @alexyap7323
    @alexyap7323 Жыл бұрын

    Genius! Thanks for sharing.

  • @magsasakangnanay1126
    @magsasakangnanay1126 Жыл бұрын

    Wow amazing . New friend here sending love and support

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Thanks. ❤❤❤

  • @MM2009
    @MM2009 Жыл бұрын

    Safety is a priority here 👌

  • @MyDom55
    @MyDom55 Жыл бұрын

    Bravo beau travail

  • @DaieiEnginia
    @DaieiEnginia10 ай бұрын

    The product that was made by this machine is amazing.

  • @osmairaparecidojoia1515
    @osmairaparecidojoia1515 Жыл бұрын

    Gostei da máquina 👍,vou tentar fazer uma 👍

  • @ClauyurgenMorillo-wh4xt
    @ClauyurgenMorillo-wh4xt8 ай бұрын

    Buen trabajo gracias por compartir

  • @ШНУРуй
    @ШНУРуй Жыл бұрын

    The car is well made. But be sure to close the pulley casing. My heart skipped a beat when a man in an apron stood next to a working machine. Safety is written in blood. I wish you success. Masina este bine facuta. Dar asigurați-vă că închideți carcasa scripetelor. Inima mi-a sărit o bătaie când un bărbat în șorț a stat lângă o mașină de lucru. Siguranța este scrisă în sânge. Vă doresc succes.

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Thanks. I am very careful and I am aware of the risks, accidents happen when you least expect it. I did some tests with the pellet machine, it works fine, but it needs a bigger engine. After I change the engine, I will also make a protective case.

  • @user-gq7gz9zk6l
    @user-gq7gz9zk6l Жыл бұрын

    Respekt!!!!

  • @BERZOweldingprojects2022
    @BERZOweldingprojects2022 Жыл бұрын

    Super

  • @anibalpena7588
    @anibalpena7588 Жыл бұрын

    Deberias de colocarles unas aletas!!!!!!! Para que el material de la esquinas se aproveche mejor!!!! Felicitaciones se ve que quedo bien!!!

  • @dakleinhaeuslerrudi
    @dakleinhaeuslerrudi Жыл бұрын

    Respekt! Gute Idee. Das gefällt mir. Wenn ihr damit in Serie geht und verkauft, lasst es mich wissen. TOP

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Danke für die Wertschätzung. Es ist ein DIY-Projekt und ich werde mit dieser Maschine keine Produktion durchführen. Ich werde in Zukunft versuchen, Pellets aus Weizenstroh herzustellen. Ich möchte einen Pelletofen bauen, um meine Werkstatt zu heizen. ;)

  • @charleswills3658
    @charleswills3658 Жыл бұрын

    Great machine. Love have all dimensions

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    I will make a video with the dimensions of this machine.

  • @521farmer
    @521farmer Жыл бұрын

    !!! Thks for sharing your project need one for my rabbits go through a lot of pellets have close to 60 of them the design is very easy to understand live on Farm parts are easy to find is the motor 220 Amp or basic power l,m signing up cause you make it easy to build keep your projects coming best wishes in new yr God bless you

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Hello. I'm glad you found inspiration in my project. I started this project with a front wheel hub from a tractor and a perforated mold. The mold has a diameter of 260 mm and the gauges are 8 mm. To work well, a 7.5 kw three-phase motor is required. kzread.info/dash/bejne/qqx2qrmMhLnXlLg.html

  • @justintothetruth

    @justintothetruth

    Жыл бұрын

    Great comment

  • @niklar55
    @niklar559 ай бұрын

    10/10 and 😊👍 I think that if the slots in the rollers were like an acme thread, they would probably self clean. .

  • @DorelBorlea

    @DorelBorlea

    9 ай бұрын

    I didn't think about this. I have to try it.

  • @patriotanumero1578
    @patriotanumero1578 Жыл бұрын

    Buenisimo

  • @fricknjeep
    @fricknjeep10 ай бұрын

    hi there well done , john

  • @DorelBorlea

    @DorelBorlea

    10 ай бұрын

    Thanks

  • @dantsant4744
    @dantsant4744 Жыл бұрын

    Felicitaciones..!!

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    thanks

  • @umarabideeny8903
    @umarabideeny8903 Жыл бұрын

    Good Nice Bob

  • @viktorvolkov8388
    @viktorvolkov838810 ай бұрын

    Дякую, крутяк

  • @justintothetruth
    @justintothetruth Жыл бұрын

    Thank you

  • @horaciof4191
    @horaciof41913 ай бұрын

    Buenísima ✨

  • @DorelBorlea
    @DorelBorlea Жыл бұрын

    How to build a pellet machine part 1 - kzread.info/dash/bejne/emmfp6Vymbi1dsY.html

  • @nicky5185
    @nicky5185 Жыл бұрын

    This is nice!!! How did you get those rollers? Did you make them yourself?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Hello. The rollers are made by me from a hydraulic cylinder rod. kzread.info/dash/bejne/emmfp6Vymbi1dsY.html

  • @nicky5185

    @nicky5185

    Жыл бұрын

    @@DorelBorlea Thanks! 🙂

  • @congnghexanhsecoshb1303
    @congnghexanhsecoshb1303 Жыл бұрын

    Thanks

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    👍

  • @francstrucl4506
    @francstrucl4506 Жыл бұрын

    Dobra mašina

  • @dierkhansen9573
    @dierkhansen9573 Жыл бұрын

    Nice machine, well done. What is the inside diameter of the cylinder? Regards

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Thank you. 260 mm

  • @bernardhorig8809
    @bernardhorig8809 Жыл бұрын

    Excellent possible d avoir un plan

  • @alvaropecillo4410
    @alvaropecillo4410 Жыл бұрын

    Me gustaría aprender Aser está máquina muy practica

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    El proyecto no está terminado. De momento funciona bien con pellets de cereales. Montaré un grupo reductor y un motor de 7,5 kw para producir pellets de calidad para el fuego.

  • @santiagocarnicerogarces9546
    @santiagocarnicerogarces9546 Жыл бұрын

    Es un poco seguro ,hay que mecanizarlo más le hace falta un deposito con dosificador de la madera y una envasado en sacadora y proceda a producción en serie.

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    De momento haré pellets para mi propio consumo. Se pueden hacer mejoras en el camino, se puede hacer una pequeña línea de producción.

  • @donaldmatthies6026
    @donaldmatthies6026 Жыл бұрын

    Anyone else notice at 4:50-4:54, that the black bucket already contained pellets that they were adding and it was filling the white bucket.

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    To make the pellets, the mold must be heated. At first, the material is a little wet and the pellets come out softer. In order for the mold to heat up, soft pellets are reintroduced into the pellet machine to remove moisture and the pellets will come out stronger and dry.

  • @michaelovertaik454

    @michaelovertaik454

    Жыл бұрын

    @@DorelBorlea what are the raw materials or ingredients u used and other raw materials can be incorporated into making diverse pallets

  • @user-dm6cc9hf6y
    @user-dm6cc9hf6y Жыл бұрын

    رسالة ممتازة

  • @Oldwolf9
    @Oldwolf97 ай бұрын

    It is preferable to apply coarse sand after mixing it with oil to clean the internal iron

  • @DorelBorlea

    @DorelBorlea

    7 ай бұрын

    The holes of the mold must get shiny. I did this procedure in another video.

  • @ilpozzodelleidee4276
    @ilpozzodelleidee4276 Жыл бұрын

    Il disco forato e i rulli dove li hai comprati ? Voglio costruirla anche io costano molto e il perno centrale? Grazie mille per un tua risposta ciao

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Ho comprato il disco perforato da un sito di vendita. Il mozzo centrale è dalla ruota anteriore di un trattore.

  • @davistay8143
    @davistay8143 Жыл бұрын

    Do you require to add water to your wood dust so that it can form to pellet?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    the humidity must be around 16%. if the pellets do not bind, then water must be added.

  • @luisburiola7076
    @luisburiola7076 Жыл бұрын

    Muy buena tu palletizadora pero quede con una duda la manguera es una valvula tiene alguna funcion con un compresor

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    la manguera es para engrasar. La vaselina se introduce en los cojinetes a través de esa manguera.

  • @tonchanthol5329
    @tonchanthol53293 ай бұрын

    😊😊

  • @BERZOweldingprojects2022
    @BERZOweldingprojects2022 Жыл бұрын

    Poți face și pentru iepurași granule din cereale?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Granulele astea sunt din cereale. Am dat la porci. Merge si pentru iepuri. O sa mai incerc sa fac din lucerna.

  • @JayaSelalu-ix7vb
    @JayaSelalu-ix7vb8 ай бұрын

    Apa kah Itu Tidak Mengunakan Gearbox Lagi

  • @miletrifunovic8989
    @miletrifunovic89895 ай бұрын

    Jel ovo pravi koncentrat za nosilje

  • @norbiwynalazki
    @norbiwynalazki Жыл бұрын

    Fajna robota at pracochłonna czy to jest ekonomiczne

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Dziękuję.

  • @aydnturhan6838
    @aydnturhan6838 Жыл бұрын

    Toplarin icinde rulmanmi kullaniyorsunuz

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Konik yatak ve bilyeli yatak kullandım.

  • @sikandarshar
    @sikandarshar Жыл бұрын

    Please give all dimensions of pellet matchine

  • @charleswills3658

    @charleswills3658

    Жыл бұрын

    Did you get dimensions

  • @user-ds3tc8ci7u
    @user-ds3tc8ci7u Жыл бұрын

    Чистые опилки хорошо гранулирует?? Ответь пожалуйста

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Не вы. Я пробовал только со злаками и пшеничной соломой или молотой люцерной.

  • @mariomirto7610
    @mariomirto7610 Жыл бұрын

    Puoi farlo con foglie di castagno o leccio

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Sì, i pellet possono essere ricavati da foglie o altri scarti vegetali.

  • @ezioredigolo4066
    @ezioredigolo4066 Жыл бұрын

    È più la corrente che consumi che il pellet che produci Io vado avanti a legna

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Attualmente sto facendo dei test con questa macchina pellet. Devo usare un motore più grande per poter estrarre più pellet. L'elettricità non è così cara. Penso che riscaldare con il pellet sarà più economico che con la legna.

  • @user-nr2sp1di7c
    @user-nr2sp1di7c Жыл бұрын

    Эта машинка больше энергии съест чем пеллета тепла даст

  • @sirojiddinzayniddinov8530
    @sirojiddinzayniddinov8530 Жыл бұрын

    не чего непонятно и его оббарот слишком мало надо увеличит

  • @ciarad.bumatang7151
    @ciarad.bumatang7151 Жыл бұрын

    Hi. Do you think it's possible to have only one pellet roller?

  • @ricardofavela2990

    @ricardofavela2990

    Жыл бұрын

    Or none,,, 🙄

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    There must be 2 rollers because they must press evenly on the mold.

  • @betondarm
    @betondarm Жыл бұрын

    Buna prietene, multumesc mult ca mi-ai raspuns.Ce motor folosesti la acest film?Pentru ca imi place ca peletii sa arate bine si totodata tari.Matriza pe care am facut-o are 19,5 cm in diametru, arborele de antrenare 2 cm . și rulmenții roților mașinii. Vă rog să răspundeți. Mulț

  • @betondarm

    @betondarm

    Жыл бұрын

    Buna prietene, multumesc mult ca mi-ai raspuns.Ce motor folosesti la acest film?Pentru ca imi place ca peletii sa arate bine si totodata tari.Matriza pe care am facut-o are 19,5 cm in diametru, arborele de antrenare 2 cm . și rulmenții roților mașinii. Vă rog să răspundeți. Mulț

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    In acest film motorul este de 4 kw la 3000 rot/min. Matrita are 260 mm si peleti au 8mm grosime. Motorul de 4 kw nu face fata. Trebuie un motor de 7,5 kw

  • @davidarrieta329
    @davidarrieta329 Жыл бұрын

    Maestro en donde está ubicado ud se q es información confidencial pero me referiría a q pais está y que estado

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Hola, soy de Rumania.

  • @alexisrondon1100
    @alexisrondon1100 Жыл бұрын

    Se ve que no hace el trabajo vean los rodillos detenidamente

  • @user-fk7zb6go5x
    @user-fk7zb6go5x Жыл бұрын

    Работает ок

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Он работает довольно хорошо, но необходим более мощный электродвигатель. Размер пресс-формы 260 мм, и я думаю, что для лучшей производительности необходим двигатель мощностью 7,5 кВт.

  • @ilmarsmarsils8029
    @ilmarsmarsils8029 Жыл бұрын

    How many kWh needed for 100kilos of pellets?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    I am not shure but i think 7 kwh.

  • @mulnyoto2789
    @mulnyoto2789 Жыл бұрын

    The white chicken is waiting for the result..

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    the chickens enjoy the scraps that fall on the ground the most.

  • @aljonnovelo8655
    @aljonnovelo8655 Жыл бұрын

    did you use gearbox?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    No

  • @toronero9528
    @toronero9528 Жыл бұрын

    seems so slow, is it convenient ?

  • @coltonward3609

    @coltonward3609

    Жыл бұрын

    Probably not, but when theres shortage as there is now be alot better than freezing ass off.

  • @dineshsahu-il1vf
    @dineshsahu-il1vf6 ай бұрын

    Can you suggest mejarment inch by inch for 10HP feed pellet machine please

  • @DorelBorlea

    @DorelBorlea

    6 ай бұрын

    The engine is not enough to make a pellet machine. A speed reducer group or a large and a small pulley is required. The speed of the mold must be between 100 and 250 rpm. In this video I used a 4 kw motor. Along the way I made several changes and now I use a 7.5 kw, 1500 rpm motor.

  • @pobkx
    @pobkx Жыл бұрын

    Hola, cuantos kg por hora te entrega esa máquina ??

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    No lo sé. El coche está siendo probado, quiero mejorarlo. El molde tiene un diámetro de 260 mm y, en teoría, dicho molde debería producir alrededor de 200 kg por hora. Le montaré un motor de 7,5 kw y un grupo reductor.

  • @user-dx9iv9gj6u
    @user-dx9iv9gj6u Жыл бұрын

    Двигатель не греется? Мне тоже куры помогают.

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Двигатель не греется. Без кур не обойтись. ;)

  • @nivasgavali6987
    @nivasgavali6987 Жыл бұрын

    Best idea low cost, what is price without motor

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    It's not for sale. The pellet machine is made of recovered materials. I do not know how much it is.

  • @bobboboff5326
    @bobboboff5326 Жыл бұрын

    Блин, я подумал что он будет фарш делать из дров 😁😂🤣

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    было интересно, если мы вставили бревно и вышли пеллеты. :) Проект еще не закончен. Я хочу сделать гранулы из измельченной соломы. Пеллеты будут использоваться для отопления дома.

  • @user-xj8rq6eo9k
    @user-xj8rq6eo9k Жыл бұрын

    гранулятор в действии!

  • @ramonb3821
    @ramonb3821 Жыл бұрын

    Buenas! Me gustaría poder contactar con usted, cómo podríamos hacerlo?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    podemos discutir aquí en youtube.

  • @ignaciovelazquez7969
    @ignaciovelazquez7969 Жыл бұрын

    es plique el prose dimiento dela maquina como se llaman que medidas tienen donde se conzihen

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    La máquina de pellets se puede hacer de varias maneras. No se requieren medidas. La mayoría de los componentes se recuperan de otras máquinas.

  • @user-fl6rh1os6v
    @user-fl6rh1os6v Жыл бұрын

    How can buying it

  • @salahabdallah1395
    @salahabdallah1395 Жыл бұрын

    فكرة وتنفيذ ممتازة السؤال الماتور سريع ولابطئ

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    شكرًا. المحرك لديه 4 كيلوواط 3000 دورة في الدقيقة.

  • @betondarm
    @betondarm Жыл бұрын

    Buna ziua, sunt din Belgia, as dori sa stiu cat de puternic ar trebui sa fie motorul pentru o masina de peleti facuta singur pentru a-mi incalzi casa. Poți să ajuți?? mulțumes

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Buna ziua. Cred ca pentru orice masina de facut peleti este necesar un motor de minim 7,5 kw. Conteaza foarte mult diametrul matritei, diametrul peletilor, ce fel de reductor folositi, materialul din care faceti peleti. Eu am testat mai multe motoare. 4kw, 5kw si 7,5 kw. Cel mai bine ar merge cu un motor de 10 kw dar instalatia electrica a casei mele nu suporta asa motor mare.

  • @user-ym3rg2lo6p
    @user-ym3rg2lo6p5 ай бұрын

    Шланг подведен для чего ?

  • @DorelBorlea

    @DorelBorlea

    5 ай бұрын

    шланг предназначен для смазки подшипника ступицы.

  • @772777777777777
    @772777777777777 Жыл бұрын

    Where did you Source your dye from

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    I bought it from a friend.

  • @valmirsantos9536

    @valmirsantos9536

    Жыл бұрын

    @@DorelBorlea Can you send the project of this machine? I am from Brazil

  • @stephanedupuis5390
    @stephanedupuis5390 Жыл бұрын

    C'est bizarre...pourquoi est-ce qu il prend des pelets ,et non de la sciure, dans le seau noir pour les mettre dans sa machine....

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Ce sont des granulés de céréales et parce qu'ils étaient trop mous, je les ai remis en sac. Maintenant, je fais des tests avec cette machine à granulés. Le projet n'est pas encore terminé.

  • @fryloc359

    @fryloc359

    Жыл бұрын

    Part of the process is getting the die hot to drive off moisture. the first round of pellets will need to be run through two or three times in order to get the die hot and the moisture out.

  • @matizspark7283
    @matizspark72837 ай бұрын

    Мастер жмот зачем прятал как сверлилдырки

  • @catalinionitoiu4428
    @catalinionitoiu4428 Жыл бұрын

    Salutare Spune mi te rog ce turație are nevoie la sită Mulțumesc

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Maxim 250 rotatii. Sita mea nu stiu cate rotatii are dar cred ca se incadreaza.

  • @user-ln8dk8ob1o
    @user-ln8dk8ob1o6 ай бұрын

    Я маë вариант для Маев думал можно чу меньше ил больше толк нимнг

  • @user-xu9di1uj8m
    @user-xu9di1uj8m Жыл бұрын

    Hello. The technique is good.I have questions; 1) engine power.2) The rotation frequency of the matrix. 3) installation performance.?Thanks.

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Hello. The motor is 4 kw but a 7.5 kw one is required. I don't know what the rotations of the perforated die are. After I install a 7.5 kw motor, I will do some tests to see how much pellets it makes per hour.

  • @BERZOweldingprojects2022
    @BERZOweldingprojects2022 Жыл бұрын

    Materia prima trebuie sa fie umedă sau uscata?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Eu am umezit putin cerealele.

  • @andreshernandez8687

    @andreshernandez8687

    Жыл бұрын

    Que materia usa para aser el pelect

  • @morgantesrl9426
    @morgantesrl9426 Жыл бұрын

    Buona sera sono Paolo sarei interessato all'impianto grazie teniamoci in contatto grazie

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Ciao. Possiamo discutere di questo progetto qui su youtube.

  • @charleswills3658
    @charleswills3658 Жыл бұрын

    Do you build them to sale

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    No. It is a homemade project. Is not for sale.

  • @charleswills3658

    @charleswills3658

    Жыл бұрын

    Have all the dimensions and share

  • @user-ym3rg2lo6p
    @user-ym3rg2lo6p5 ай бұрын

    Мощность двигателя и передаточное шкивов какие ?

  • @DorelBorlea

    @DorelBorlea

    5 ай бұрын

    В этом видео я использовал двигатель мощностью 4 кВт. Для хорошей работы необходим двигатель мощностью 7,5 кВт. Чтобы сделать пищевые гранулы для животных, используется двигатель меньшего размера, но я хочу делать гранулы для огня. Для этого необходим более мощный двигатель и шестеренчатый редуктор.

  • @bluverano
    @bluverano Жыл бұрын

    How many kilowatts is the power of the electric motor? 220v or 380v?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    380v 7.5 kw electric motor.

  • @bluverano

    @bluverano

    Жыл бұрын

    @@DorelBorlea Thanks👍

  • @idkname
    @idkname Жыл бұрын

    que coisas você coloca enquanto faz forragem. listá-los

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Fiz pellets de cereais moídos, palha, alfafa.

  • @idkname

    @idkname

    Жыл бұрын

    thanks

  • @idkname

    @idkname

    Жыл бұрын

    @@DorelBorlea Divirta-se

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    ;)

  • @davidhardman6291
    @davidhardman62914 ай бұрын

    Increase your roller diameter and RPMs.

  • @DorelBorlea

    @DorelBorlea

    3 ай бұрын

    to do this, a 10 kw motor is needed.

  • @sergeieliseev7501
    @sergeieliseev7501 Жыл бұрын

    Кто нибудь рассчитывал кпд преобразования древесины в паллеты? 🤔

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Привет. Мы не рассчитывали эффективность преобразования опилок в пеллеты. Но я говорю, что оно того стоит.

  • @betondarm
    @betondarm Жыл бұрын

    Domnule, care este diametrul rolului pentru o matriță de 120? și lățimea Vă mulțumesc

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Rolele mele au 80 diamertu.

  • @panchitobarrios9929
    @panchitobarrios9929Ай бұрын

    Me gustaría el número de la persona para ablarle

  • @mustafasaric183
    @mustafasaric183 Жыл бұрын

    Koji je motor od koliko kw

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    3000 rpm , 4 kw.

  • @azedokiwelu352
    @azedokiwelu352 Жыл бұрын

    Please how can I reach you?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    we can discuss here

  • @brandonwilson9345
    @brandonwilson9345 Жыл бұрын

    At 4:49 u can see that the bucket he is getting handful of and putting in is already pellets. Good concept but not right to make people think your doing something your not

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    The resulting pellets can be reintroduced into pellet machine if the moisture is too high.

  • @sylwektokar4742
    @sylwektokar4742 Жыл бұрын

    Motor Electric how kW? 💪💓

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    4 kw - 2800 rpm. For best results is needed a 7.5kw electric motor.

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    kzread.info/dash/bejne/gIiTupOGdJyshLQ.html

  • @sylwektokar4742

    @sylwektokar4742

    Жыл бұрын

    @@DorelBorlea Thx💓

  • @user-fl6rh1os6v
    @user-fl6rh1os6v Жыл бұрын

    هل هناك توصيل للعراق؟ وكم السعر

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    إنه ليس للبيع. لقد بنيت هذه الآلة للاستخدام المنزلي.

  • @foxbat6110
    @foxbat6110 Жыл бұрын

    Tak pelet ok a prąd ?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Mówię, że warto.

  • @orl477
    @orl477 Жыл бұрын

    I wonder if that chicken is going to be dinner later on.

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    She is still laying eggs. It will not be cooked too soon. ;)

  • @orl477

    @orl477

    Жыл бұрын

    @@DorelBorlea save some eggs for a chicken omelet 🤭

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Ok. 😋

  • @antolinijeanfrancois7
    @antolinijeanfrancois7 Жыл бұрын

    Et le marc de café ?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Je n'ai pas essayé avec du marc de café. Mais cela devrait aussi aller avec du marc de café.

  • @BIGPGA
    @BIGPGA Жыл бұрын

    Ard bine ? Din ce ai făcut?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Am facut peleti din cereale macinate si din paie macinate. Ieri am facut focul in atelier cu peleti din paie si ard super bine. Defapt soba racheta nu prea este pretentioasa, merge cu orice arde.

  • @BIGPGA

    @BIGPGA

    Жыл бұрын

    @@DorelBorlea eu am încercat cu boabe și se înfundă, cu peleti din porumb sunt curios dacă merge...nu aș lua un granulator fără să știu dacă ar merge ...peletii din paie sunt făcuți numai din paie ?

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    @@BIGPGA Probabil ca sunt tot felul de retete pentru a fabrica peletii si pot face diferite amestecuri. Eu am amestecat paiele cu putina apa si au iesit super ok. La soba racheta se pot folosi si boabe de porumb dar trebuie modificat arzatorul astfel incat sa nu cada boabele din el. Peletii sunt mai marisori si nu sunt probleme. Am vazut soba racheta construita de tine dar as zice sa incerci sa faci una din caramida cu samota si va functiona perfect.

  • @BIGPGA

    @BIGPGA

    Жыл бұрын

    @@DorelBorlea păi nu cădeau boabele...ardeau da nu mai cădeau.. o să mai modific și văd cum fac că vreau să reduc costul la materia arsa și să fie și automat

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Eu vreau sa imi fac peleti din paie, iarba sau frunze uscate. Sper ca la anu sa trec cu incalzirea casei pe peleti. Lemnele sunt foarte scumpe si este multa manevra cu ele.

  • @fluturascosmin5760
    @fluturascosmin5760 Жыл бұрын

    In cat timp faci un sac si de unde iti procuri materia prima pentru peleti?👍👍👍

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    Salut. Inca nu este finalizat proiectul. Trebuie sa pun un motor mai mare ca sa mearga la capacitate maxima. Intentionez sa imi fac peleti din paie.

  • @JohnnyCrowStudio

    @JohnnyCrowStudio

    Жыл бұрын

    ​@@DorelBorlea Salut, Acesta este un granulator da facut furaje (hranirea animalelor), ci nu o masina de facut peleti (rumegus, lemn) folositi pentru incalzirea unei locuinte. Diferenta intre cele doua consta in modul de functionare al sistemului de presare. Granulator furaje = rola este fixa, iar matrita se roteste. Viteza de rotatie a axului reductor este de 150-300 rpm. Pret produs nou cel putin 1000 Euro. Masina peleti = rola se misca (creeaza o presiune mai mare), iar matrita este fixa. Viteza de rotatie a axului reductor este de 80-150 rpm. Pret produs nou cel putin 5000 Euro. Daca se cumpara de noua, masina de facut peleti este mult mai scumpa decat cea de granulat. Sistemul din clip are nevoie de imbunatatiri, in primul rand se recomanda folosirea unui reductor, ci nu a unei fulii ce mareste cuplul. Oricum pentru inceput este foarte bine. Bravo! Respect pentru toate proiectele puse in practica.

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    @@JohnnyCrowStudio Multumesc frumos pentru apreciere. Aveti mare dreptate. Acesta este un granulator si nu intentionez sa fac peleti din rumegus cu el. Granulatorul are un motor de 4 kw si vreau sa il schimb cu unul de 7,5 kw. Atunci o sa incerc sa fac peleti din paie. Am facut cateva teste cu acest granulator si cred ca merge binisor. Posibl pe viitor sa incerc varianta cu reductor de turatii.

  • @bombardierulbombardier2561

    @bombardierulbombardier2561

    Жыл бұрын

    În 5 zile

  • @DorelBorlea

    @DorelBorlea

    Жыл бұрын

    @@bombardierulbombardier2561 nu conteaza in cat timp fac un sac de peleti, conteaza ca ii fac. ;)

  • @user-ky6zc8iv2c
    @user-ky6zc8iv2c Жыл бұрын

    То

Келесі