Absolutely first class explanations. Thanks

@How-to-repair

18 сағат бұрын

You're very welcome! I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

All the way from Canader!! Thanks for the video - you solved my breaker-tripping range issue and it only cost me $3.75 CDN! One of the two bulbs in the oven was BADLY deteriorated causing a short and the breaker to trip. Could'nt believe it - thought at the very least 100 bucks for an element! Thanks brother - just subscribed to your channel.

@How-to-repair

2 жыл бұрын

Excellent! glad i was able to help

This video was very helpful. I took the oven apart, checked each element separately and found that the bottom element had completely crumpled.

A very informative video. Here in New Zealand, we don't put ovens or hobs on RCD's. They are usually on an MCB. The lights and power points are all on RCD's. The rules are 3 circuits per RCD. Alternatively we just use RCBO's.

Thank you sir you r awsome my oven was not working and i saw your video and it show i have to see circuite board and its done my oven working

Brilliant expalanation, thank you good man

You are legend... This video is very very good. Brilliant explanation of possible fault of that electric cooker.

@How-to-repair

Жыл бұрын

Glad it helped @darkbyte1271 please remember to subscribe to our channel as that really helps us kzread.infoe432SAb2g08 Thanks, Paul 👍

Hello and good afternoon I hope that you are well. I have a Beko KDG252 cooker and for some reason the gas is coming out but the clicker aint working to bring the flames on the oven and hobs. I would be super grateful for some help. Thank You

Very informative, thank you.

Range master oven trips the rcd when Turing off main oven socket, any idea

This was awesome, I was so close to buying a new oven... turns out my lightbulb had gone and was tripping the circuit breaker! New lightbulb: £5 :D

@How-to-repair

Жыл бұрын

Glad you got it so cheap glad we could help you @stevewelch4784 this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

Very informative video thanks ! Do you know what the likely cause would be of the rcd tripping but only once the oven is turned off? Its intermittent and random but only after switched off for 5-10 mins

Great explanation..

Fantastic content. Thankyou

@How-to-repair

2 жыл бұрын

Glad you enjoyed it!

Great video. Just moved into a house with an AEG cooker that has never been used, still had the labels hanging from it. It turns on but as soon as you turn the temperature dial the RCD trips. Tried using only the top element or bottom element but it always trips. Could you give me an idea what might be causing this?

@mperformancepack4792

Жыл бұрын

I have the Same issue, did you get to bottom of this ?

Mine has started tripping when I switch the oven off!

Hi my oven was working very well then I decided to clean the oven using soup and small water now is trapping pls help,,, thank you

@xx.1.

Жыл бұрын

Did you find out? I did the same now trips

I have a Bosch oven. Simply opening the door is sufficient to trip the switch on the breaker. The oven doesn't even need to be on, nor been on prior to opening the door. My guess is that the door sensors need replacing but it's just a guess. However, it is intermittent and doesn't occur everytime the door is opened.

@maryoneill5449

Жыл бұрын

Have the same problem and its a BOSCH HBS573BSOB. Is that your one?

My Gas Oven is Blowing the Plug Fuse that does the ignition, clock, timer, and Oven light. Could this be a socket or Oven Problem. Thanks for any help Bob

@How-to-repair

3 ай бұрын

Hi @TheDappler I will need the full model number of the identification plate and the details of your problem. Please use our contact us page and make sure you fill out the request for what your problem is. We will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks 👍

Hi there I need help with my bush AE6BFB GRILL OVEN . it’s doesn’t give heating while the fan is working fine so I though it’s the elements I’ve replaced with a new one but unfortunately it’s still not heating at all so I’m just wondering what could be the problem just to let you know that my grill temperature light and grill setting up light in the front none of them are not working too so can you suggest me what could be the possible reason of not heating plz plz helps with your valuable suggestions

Hi there we had a hob selector switch melted do we replace thankyou for your video 😀

He bro, I have air fryer/oven and when it gets hot the vents of the fan inside expand and it lifts up causing it to stop the fan...so is it safe to connect the vents to the heating element with a copper wire in order to stop it from hitting the fan?

Very informative

@How-to-repair

Жыл бұрын

Glad it was helpful! Thank you for leaving a comment this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

Thank you for an excellent video, as always. Any chance of making a similar one for dishwashers? (An old Bosch in my case)

@How-to-repair

Жыл бұрын

i have 100s to make lol but will look at d/w shortly Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. kzread.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

My Neff single built-in oven has just started to trip our RCD on starting. Both the top and fan elements look okay visually and I can spin the fan blade with my hand without any problem. What should I check for first without totally removing the oven (if possible)? Thank you.

@How-to-repair

2 жыл бұрын

The easiest way to test this without a multimeter or a insulation tester. First disconnect the power from the electricity then isolate one element at a time. Then turn the power back on making sure that the wires were safe not touching any metal and try each individual element. This should only be really done with someone who is competent with electrics. This way you will be able to find which element is specifically causing the rcd leakage problem. If you need any further assistance please contact us through the website and send your telephone number I will be glad to assist in the morning

Very good

@How-to-repair

Жыл бұрын

@themovingdance2744 this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

Love it,Beautifully explained as a result you have got a sub from me pal.🙂

@How-to-repair

2 жыл бұрын

Thanks for the sub!

Hi IKEA oven F908 error code. Can't find anything about this error code online. There is no continuity at the element, could it be that? Have changed elements in a Hotpoint oven before. This IKEA oven is proving tricky to find out about.....any help greatly recieved. Thanks

Hi , hope you can help .. we have a zanucci double oven cooker it started tripping our main fuse box .. we replaced the main oven control knob , thermostat , plus the fan motor in main oven all the other parts work with out tripping just main fan oven .

@How-to-repair

Жыл бұрын

You really need to test each individual component with an insulation tester or mega, but this is an expensive tool and I do not expect you to only one, but you may have an electrical friend who would be able to assist. The only other way is to individually test components with the Earth attached to them correctly

Hlo mr I have problem when I am on electrical cooker stove that time I face electricity problem our refrigerator and oven and cookers connection one lane so what can the problem .is cooker problem . Should I buy a cooker or can it electric line problem plz answer😢

What would be the problem in this matter , when I am trying to switch the button of cooking options to a neff oven the mind fuss goes off

Is the RCD the switch on the wall? The one where my oven is connected has two switches, one of them red. Also, my oven is 30 years old and has not worked for as long as I've lived here. If I turn it on, it immediately trips the breaker. My landlord wants to put a new fuse in it, but he is not an electrician. Should I just forget about getting this thing fixed?

@How-to-repair

Жыл бұрын

it will be only a faulty element causing this Thank you for leaving a comment this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

My microwave neutral and ground wires are testing hot, meanwhile, live wires tests cold. And it's blowing the main fuse.

I had a cooker, which blows the fuse in the plug as soon as it plugged in. I did meg test on the oven, it came with 550Mohm. Couldn't understand what was wrong?

@How-to-repair

2 жыл бұрын

if it blows the fuse this is normally a direct short. Thank you For leaving a comment this is for you kzread.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

My oven trip when reaching maximum temperature.what is the solution and how to fix it

I need help, my super genaral 4 burner gas stove when gas ignition on electric switch tripping. How solve.please.telme.

@How-to-repair

Жыл бұрын

If it is tripping the electric supply, then you may have electricity tracking to the chassis. This could be from a spillage or you may have a wire trapped. You can always try disconnecting a component and making sure the wires are safe and try it again, but all work should be done by a qualified gas engineer, depending on where you are in the world. @shalihanjaffer2179 please remember to subscribe to our channel as that really helps us kzread.infoe432SAb2g08 Thanks, Paul 👍

Are you back in uk don’t look like Portuguese plugs ?

My microwave oven works fine but I have cockroaches in the interior. Roaches can't be killed by microwaves. Usual methods of pest control aren't working. Help! Anyone have suggestions?'

@How-to-repair

2 жыл бұрын

I seriously do not know the answer with this I suggest you get someone in to do pest control

@sonyamoz9347

2 жыл бұрын

Cloudy ammonia 8% will move them out of ur house forever.. Don't forget mask and glasses when you spray..

@raven488

Жыл бұрын

I’m confused my main oven started to trip after years it’s an zanucci double oven .. so we changed the main oven controll knob , the thermostat , plus the fan oven motor it was working great then started doing it again .. we are at a loss ?? Please help!

Intro music so loud, but your voice during explanation so quiet... Please normalise your audio.

too much waffle