Steve Morris FTW

@glennverdeyen5685

Жыл бұрын

Yeah baby yeah Steve's the man 🤘

@K-Effect

Жыл бұрын

You definitely get what you pay for

@n.b.p.davenport7066

7 ай бұрын

If they break it they bought it

Crazy to think I was about to type out that the SMX can live at 4500 HP. And then trying to wrap my head around a car that can street drive at 1100HP and flip a tune and make 4500hp. Absolute crazy world we live in.

@arbiter1

Жыл бұрын

its able to do that cause Cleetus has same engine and the intake has a total of 3 injectors per cylinder. 1 injector for pump gas for street driving and idleing, other 2 are for meth/alcohol to for strip runs.

@kaos33633

Жыл бұрын

@@arbiter1 oh I know how it works. I follow Steve Morris and am a mechanic. But like ten years ago 500hp was crazy lol it's crazy hand over money and get 4500hp plus. And drive it on the street

@thetruthspeaker1978

Жыл бұрын

​@@kaos33633don't you love when you make a statement and someone explains the why's of it with "cause Cleetus has same engine" .. 😂😂😂 I don't think he understands that People have always had the ability to put big ass turbos and multiple injectors on an engine but without modern electronics it was simply a bomb. So that leaves me feeling the same way as you, 500hp was a lot not very long ago..what a crazy world we live in. 👍

@Ray56z

Жыл бұрын

@@thetruthspeaker1978 Decades ago when I was street/strip I so wanted to turbo I hunted one down, wanted it on my big cube SBF. I was good with wrenches but smart enough I always had a builder. He shut me down no questions asked after he explained the limits on having one for street and strip-which I needed due to hustling runs off the tracks. If I were 40 years younger today, my smile would be frozen from the top of one ear to the top of the other ear. And I'm actually glad I stayed away from the vids and tech on turbos until a couple of years ago when everything is just about where it's able to go, and pick up the info now. Even back then it wasn't even imaginable what's the norm for big money builders and buyers today-take a 2hp per cube and turn it into a 6.5hp per cube, then back to 2hp and street driven.

@thetruthspeaker1978

Жыл бұрын

@@Ray56z could you imagine running street races with something like a bòosted coyote on E85 40 years ago ..they would swear you had a UFO 😂

I'm always impressed by the safety measures they employ when they dyno these cars.

Steve Morris and Fueltech! whats not to love? a match made in Horsepower!

SMX BABY!!!! YEAH!!! He’s a guru. Steve Morris all the way.

In other FT videos I noticed that people wondered why all the race gear being worn, it is just a dyno pull. I suspect there has been a close call with a fire at least once and that is why all the gear, some of these cars are not exactly super easy to get out of really quick.

@glennverdeyen5685

Жыл бұрын

Some people just can follow logic 😂

@MX304

Жыл бұрын

Thinking it is "just" a dyno pull is what gets people hurt. At these power levels, anything can happen. Fires, mechanical failures, etc etc. People have been seriously injured and even killed when dyno pulls have gone wrong.

@tetracontrol

Жыл бұрын

transmission explosions

@andreweberjavorski2231

Жыл бұрын

in tests have much fuel and fire, the engine have 500kg and run at 8k rpm with hot oil and parts, this is a very crazy and very danger

@samsonian

Жыл бұрын

@@andreweberjavorski2231EXACTLY. Beyond the fact running tests with E85 are dangerous enough, this monster is running METHANOL, BABY! Not only will it make you look like a crying wimp (“I’m not crying, you’re crying” joke) but it burns colorlessly and so much of it is being delivered to the engine in one of these pulls if you had a fuel hose failure plus a spark you could have an ugly situation in not many milliseconds. Why do you think F1 outlawed the use of methanol…fires were being started accidentally in the pit and nobody knew it until their skin started boiling! (A little over the top but you get the idea) Cheers!

Twin Turbos with Zoomies? Sheeeit never seen that before. Will definitely be keeping an eye on this viper at World Cup.

So Proud to Be Sposered By such an AMAZING Company!!! Building My 88 10th anniversary RX-7 I've had for 25years street port 13BTURBO and gonna be Run on The FT-450 Setup. VERRY GREATFULL Guy's! This Cars NUTTS!!! 👍🏽👍🏽👍🏽

SMX is awesome! Tom bailey ran a 5.99 1/4 mile in his SMX powered drag n drive car! This motor is capable of up to 70lbs. Of boost! All billet sleeved and o ringed pure badassery. Good luck with the car. Its bueatiful

@jon-marcodaughtery8868

Жыл бұрын

Tom Bailey has been way faster with it. He has been 5.77 at 260 with the SMX.

@randalltufts3321

Жыл бұрын

@@jon-marcodaughtery8868 referencing the drag n drive event record.

Watching people like this work in the natural habitat is absolutely mind blowing. I would love to see this in person, an absolute dream of mine

Never saw a turbo car with zoomies before. Pretty cool!

@lb9gta307

Жыл бұрын

Because it would need individual turbos for each cylinder to be real. This just has exhaust tips that look like zoomies.

Man! Steve! Your boy here just called your SMX a 572 cubic inch big block chevy on 1320 video on world cup day 2. Oh the humanity!

Steve Morris SMX, Precision Turbos and Fueltech. What a great combo and the #'s show the proof is in the pudding!

Well that answers our question turbos sound good with zoombies

@chicago_race_engines7538

Жыл бұрын

Those are not zoomies.

What a differnt sound but so sweet,not high pitched like a v12,but more like a huge torque monster,what a nice build all around,cant wait for more future videos.

@nickerbocker759

Жыл бұрын

Dude it’s a big block V8……

Nice artillery sir! New too the channel, and I gotta say, the blue viper is beautiful!!! I remember seeing it on the dyno during one of SME's videos, sheeewee!!! Best of luck with the rest of HRDW!

Awsome build, that's some great power.

What a champion Ned is, "Is it a GTR" so this is a Viper, love it.

That is a awesome build! Love all the blue.

Go kick some ass boys and show everybody what an old Steve Morris smx can do, that is if they don't already know with Tom Bailey, cleetus, Mr Morris himself best of luck too you h your crew & above all else stay safe out there... P.S- I'm sure someone's going too bring up Mc, rippenz (Ryan) viper at 3100+ hp which was a roll race king with a mostly stock chassis but im sure it's for sure not anything close too 5 if it was out drag racing the old 1320 from a stand still... regardless of any of it you guys should be stocked with the outcome on how the car turned out cause it's sexy af...

Steve Morris is a monster motor magician.

I like how the tunerguy thinks safety, he's probably better dressed than most racers out there.. 👍👍

That's going to be fun and quick.

What a beast!! Absolutely love this 🐍! Is Ned not the nicest guy!?! 👊🏻

Viper and SM combo...cant go any better

steve builds one hell of a motor its nuts

BEAUTIFUL SMX VIPER STEVE MORRIS!!! 3000 rear wheel HP!!!🤔💙💙🌊😎

love that you guys are using a Steve morrris motor in this build!

So happy I came across this. Viper has my favorite chassis, and Steve is a fucking monster. Big upps

I have never in my life seen a turbo car with zoomies and I’ve always wondered why.. this is an absolute sick build and I can’t wait to see this Viper 🐍 make a lick!

@glennverdeyen5685

Жыл бұрын

I was like I see a blower exhaust. But there's a turbo. And I'm still not sure if it's a visual effect only or it there's more going on 😅

@johndoran3274

Жыл бұрын

Zoomie tips, almost counts.

@rhddc2

Жыл бұрын

You’ve always wondered why you didn’t see 4 pipes coming out of 1 hole?

@danmyers9372

Жыл бұрын

Zoomie headers on a turbo engine add nothing except looks. Oh wait, they likely add a few extra lbs.

@danmyers9372

Жыл бұрын

@@rhddc2- Exactly. They add nothing (except a few extra lbs) and don’t make sense here.

Awesome discussion at the very end! Great vid!!

This car is such a demon that they wear their fire suits and helmets during testing in the garage. Thats bananas

Can’t wait to see this at the drag strip.

Awesome project! In all fairness, the stock V10 cast block is a pretty capable platform and while you can get 3K+ HP out of it, longevity certainly becomes a factor. I know Calvo is working on a billet V10 block so that will be interesting to see and with Nth Moto in the high 6's with the V10 platform, I'm hoping to see this car run in the mid 6's if not lower. :)

@randalltufts3321

Жыл бұрын

Tom Bailey SMX 1/4 Mile 5.99 Drag n drive car! Sick the mag (magazine)

@freedomfox8183

Жыл бұрын

The problem is they don't last long at 3,000 horsepower like at all... Steve Morris is trying to make the viper block better right now for a different customer and they're trying all kinds of crazy different techniques hopefully it lives a lot longer than normal... But I like the way this guy did it and put one of Steve's actual engines in because he could push it to 4500 if he really wanted to

@cliff4695

Жыл бұрын

Steve already has a billet V10 viper engine. This SMX can easily make 4,500hp. Not sure why they didn't just let Steve do the tuning

@randalltufts3321

Жыл бұрын

Given the bore size and current geometry on the billet v10 block it comes down to available heads to make it really perform. It only took Steve 2 years to engineer, develop and put into service the SMX heads. Everything takes time to implement, and sure he's gained a whole new perspective on performance with the SMX and the ( SML , More than a year currently) and thats valuable towards new projects like the v10 motor. What it will come down to is being able to say it's a v10 viper billet motor that might get somewhat close to the power output of the SMX but I doubt it'll come anywhere near the performance level of the SMX. But. It will be made more reliable than the old castings. In the end they can say yep, its a v10 viper lol.

@sepg5084

Жыл бұрын

The viper would need a straight rear axle to fully utilize 3000+hp. Yes it is a bit doable with a IRS, but it won't be optimal. Plus if they are already chopping up this car like this and putting a V8 on it, then might as well give it a straight axle.

In the early seventies we didn't have all this stuff😮 working in a dirty garage for used parts and we got 1300 horsepower

It's hilarious how literally every drag racing shop has a Jr dragster as wall art😂

@luisdeleon2930

11 ай бұрын

It is a Top Fuel

Built to last and built to go fast 👍👍😉

Viper owner here. I'm sorry but that thing is NOT a Viper. It is a full tube chassis pro mod racecar with Viper skin, doors and trunk lid That's it nothing more.. But it is truly Badass!!!

Fuel tech is the goat love fuel tech

Steve Morris recently dyno'ed one of the SMX engines, it was his old wagon engine, Now raced by Cleetus McFarland in the Mullet Elcamino. it dyno'ed at 1080 I think with no turbos hooked up. the test wasn't specifically to see the numbers, but to check if he got the Bypass on the oil pump working properly before returning back to Cleetus. So your 1k with 3 pounds of boost, is consistent with what the SMX build is capable of. Just so you know, the build in this viper is probably similar (but not sure) to the Tom bailey Sick seconds 2.0 at 540 Cu In (only with i think a procharger), where the one cleetus runs is a 565 cu in setup

@bobgreene5460

Жыл бұрын

572 SMX, listen closely during first couple of minutes. Mullet now has the 572 ,The Boost Wagon also the 572

@crazylarryjr

Жыл бұрын

@@bobgreene5460, I knew it wasn't the standard 540 like Tom Bailey's, but wasn't sure the exact cu in, and this is with exception of the procharger practically the same as Cleet's. Thank you for the clarification Edit, i was wrong, I assumed supercharger due to the Zoomie look exhause, i realize it's an overly engineered turbo exhaust, not true zoomies

That viper gives two less shits what anyone thinks. Super nice build.

I couldn’t imagine what that’d feel like

I hope one day I can get a Steve morris engine great video thanks for sharing there’s a fuel tech in jasper Indiana I’m guessing they have a dyno too I’d love to see a car like this up close doing a pull

Great video!

putting a v8 in a gen 5 viper should be a felony

Just awesome

the worlds fastest viper is by 9th moto and their juggernaught viper its fullly streetable i think and has 3500 hp. its not choped up as much as this and has alot of factory trim still

@5uprnva

Жыл бұрын

Nth moto * and we know.

Steve Morris engine's 👍🇺🇸

SMX FTW

@breakupgoogle

Жыл бұрын

it really is the answer to everything.

@gafrers

Жыл бұрын

@@breakupgoogle Not the answer for cheap daily fuel economy 🤣🤣

@breakupgoogle

Жыл бұрын

@@gafrers u could do okay with a lean burn on 87. 20 hwy.

@gafrers

Жыл бұрын

@@breakupgoogle and need to drive it for 65 years to recover the cost of the engine alone 😁

@breakupgoogle

Жыл бұрын

@@gafrers worth the try :)

You just need to hear that starter cranking...and you already know what enginei it is...😅

That dude's next level tuner

This is the wow factor

Watched the build on Steves channel,thats a nasty quality engine for sure,jealous,envy,im greener then capt kirks alien girl friend lol.

There are different kinds of VIPER- 3500hp is definitely a PIT VIPER!

Why in such a rush to shut everything down after the pull? Would think that is hard on the turbos since you are cutting oil flow to them when they are screaming hot and spinning high rpm’s.

How about a set of zoomies on a turbo car! I love it? Is this car the first to do that? It’s the first one I have ever seen with zoomies lol I love it!

@Speedy123youknowme

Жыл бұрын

One of the pipes of the zoomies is dedicated to the waste gate this is genius design! I love it!

As much as i admire the work and design of these engines, when you take the v10 out of a viper, it's not really a viper anymore. the engine is 65% of what makes the viper the viper. That's the most unique part of the car.

imagine steve makes a V10 smx+ just for this guy lol

This is more of a viper than Odoms Gtr being a Gtr. Odom is claiming GTR records when literally the only thing that is authentic Nissan GTR is a roof skin and quarter skins. I like how they talked about adding 2 more cylinders to the SMX because I was already thinking it earlier in the video that it would be awesome to still be a V10 but an SMX. That 3500hp would have been near 4500 and they still have more in it than that. V10 SMX on kill would be over 5k to the wheels. I can’t wait to see this car doing drag and drives.

I just left the video of Nick's garage🥴🥴🥴😂

What is the issue with not using the V10 besides money?

what drive shaft and half shafts are used to handle that power?

He has made over 1k at the flywheel NA on pump gas if I'm not mistaken

Nice to see a drag Viper 👌

What an awesome machine ❤

Please keep us updated with this build when it hits the track!

@fstjack6525

10 ай бұрын

They did exceptionally well a drag week

Ummmm throttle made a v8 viper before him I believe.. they using a hellcat red eye motor.

@lb9gta307

Жыл бұрын

There have been a few V8 swapped Vipers long befor Throttle's abomination

3500 is a Sunday drive for the SMX. Easy peasy.

Could this car compete with street outlaws npk cars?

Viper is cursed, zoomies on a turbo setup

This team are mad scientists. They launched there manifold at three birds . Find it and duck tape it back on the engine and drive it to the next spot.

Looking to body Tom Bailey?!?!?!? Big swing there. Will he be McQuire or Jose Can Strike out?

Helmet for dyno run?

Nasty

She blew the top of the manifold about 200’ in the air…. Was able to put it back on and drive to the last track and break the beams to complete their first drag and drive! What a journey!

V8 in a Viper is sacrilege

I've never seen someone get so "dressed up" only to go nowhere. I know there has been dyno accidents but, has anyone seen one so explosive or violent that the "driver" has to put on all gear? If so and if on you tube, please give link.

They finally showed it..See it now.

A Viper? Whatever helps you sleep at night 😂😂

32:00 is a mustang with an LS with a tremic trans etc, is that a mustang? No, because the car is what powers it and puts it down and not the shell

Will one of those fit in my Honda?

Anyone know what pump fuel they used for the street tune?

So what's next a c8 with a sml twin turbo just to upset that community 😮

The viper would need a straight rear axle to fully utilize 3000+hp. Yes it is a bit doable with a IRS, but it won't be optimal. Plus if they are already chopping up this car like this and putting a V8 on it, then might as well give it a straight axle.

If i was him I would go to the Alabama track and I would do whatever it took to get Louise to come out and help get this monster right!

Cleeetusss🦅🇺🇸🦅🇺🇸🦅🇺🇸

The crazy thing is seen all the team switch over to Fuel tech A Brazilian Base Company

That's a NPK build for sure!

Now do the right thing and Add two more cylinders to it.

@JonHop1

Жыл бұрын

The SMX is $120,000.. The cost and maintenance of a billet smx v10 would be insane. Pretty sure the V8 is already $120,000..

Awesome car👍

I will for sure be following this journey

Never seen anyone put on a whole fire suit for the dyno. But I totally understand with that thing, probably is running methanol.

Uhh. Anybody else notice its a turbo car that has a zoomies?

Fastest car with a Viper decal on it.

Where's portuguese subtitles???

Where's the viper?

Imagine to say: yea we increased the hp by 1100 in a couple of runs. 😂

Would be interesting to see the difference in down force from the zoomies and bull horns !

@crazylarryjr

Жыл бұрын

That used to bother me thinking the zoomies were stronger, till Murder Nova lost a bullhorn and almost wrecked the newer car due to the shift in downforce. Seeing the change in real time (Car literally got up on two wheels) sort of stopped that argument

@glennverdeyen5685

Жыл бұрын

I'm really curious what the deal is with these zoomies? Can you enlighten me please? 🙏

@crazylarryjr

Жыл бұрын

@@glennverdeyen5685, There is a reason on TF and TA dragsters as well as TF and TA funnycars they turn the pipes up, That is downforce. A TF dragster can generate over 2000 pounds of downforce (more than the dragster weighs) alone, that downforce along with the spoilers fore and aft help plant the 10,000 horsepower these monsters generate. In NPK racing the Nitrous, NA 9rare) and the supercharged cars use the same type of Zoomie headers while the turbo cars use a single pipe coming out the side of the body. Some people (me included) thought the zoomie style being more direct (not through a turbo), would generate more downforce, Like i said i used to think this way, but the test run Murder Nova did where he lost the right side bullhorn (pass side) the downforce from the left side pushed the car so hard it got up on two wheels. meaning there was a lot, maybe not as much as zoomies, but lots of downforce to use. BTW yes the 3-5K (estimated)HP NPK cars won't generate 2k pounds of downforce, but whatever they can can be used very well with a properly designed exhaust.

@glennverdeyen5685

Жыл бұрын

@@crazylarryjr Thank you for the quick tour of dragracing exhaust downforce. But other then downforce they don't restict or increase power? And why the zoomies over a bull horn? Is what I'm really after

@crazylarryjr

Жыл бұрын

@@glennverdeyen5685, first off zoomies are simple easy to repair and a straight shot, secondly if everything was into a single pipe you have to time them so they don't interfere with each other, two exhaust charges hitting simultaneously. can disrupt the flow, so like with the intake, individual runners is best, the bigger the better in this case, the reason turbo's can't do zoomies, is the turbo is exhause driven the combined force of one side (twin turbo) or both sides (single turbo) drive the power adder. BTW those aren't true zoomies, they are run to 8 pipes, but not a true zoomie

Weight, please....

Turbos with zoomies ? That’s new 🤔